<abstract>
This manual describes the policy requirements for the Debian
- GNU/Linux distribution. This includes the structure and
+ distribution. This includes the structure and
contents of the Debian archive and several design issues of
the operating system, as well as technical requirements that
each package must satisfy to be included in the distribution.
<p>
A copy of the GNU General Public License is available as
- <file>/usr/share/common-licenses/GPL</file> in the Debian GNU/Linux
+ <file>/usr/share/common-licenses/GPL</file> in the Debian
distribution or on the World Wide Web at
<url id="http://www.gnu.org/copyleft/gpl.html"
name="the GNU General Public Licence">. You can also
<heading>Scope</heading>
<p>
This manual describes the policy requirements for the Debian
- GNU/Linux distribution. This includes the structure and
+ distribution. This includes the structure and
contents of the Debian archive and several design issues of the
operating system, as well as technical requirements that
each package must satisfy to be included in the
The actual editing is done by a group of maintainers that have
no editorial powers. These are the current maintainers:
- <enumlist>
- <item>Julian Gilbey</item>
- <item>Branden Robinson</item>
- <item>Josip Rodin</item>
- <item>Manoj Srivastava</item>
- </enumlist>
+ <enumlist>
+ <item>Russ Allbery</item>
+ <item>Bill Allombert</item>
+ <item>Andrew McMillan</item>
+ <item>Manoj Srivastava</item>
+ <item>Colin Watson</item>
+ </enumlist>
</p>
<p>
<heading>The Debian Archive</heading>
<p>
- The Debian GNU/Linux system is maintained and distributed as a
+ The Debian system is maintained and distributed as a
collection of <em>packages</em>. Since there are so many of
them (currently well over 15000), they are split into
<em>sections</em> and given <em>priorities</em> to simplify
</p>
<p>
- The <em>main</em> archive area forms the <em>Debian GNU/Linux
- distribution</em>.
+ The <em>main</em> archive area forms the <em>Debian distribution</em>.
</p>
<p>
<sect1 id="main">
<heading>The main archive area</heading>
+ <p>
+ The <em>main</em> archive area comprises the Debian
+ distribution. Only the packages in this area are considered
+ part of the distribution. None of the packages in
+ the <em>main</em> archive area require software outside of
+ that area to function. Anyone may use, share, modify and
+ redistribute the packages in this archive area
+ freely<footnote>
+ See <url id="http://www.debian.org/intro/free"
+ name="What Does Free Mean?"> for
+ more about what we mean by free software.
+ </footnote>.
+ </p>
+
<p>
Every package in <em>main</em> must comply with the DFSG
(Debian Free Software Guidelines).
<sect1 id="contrib">
<heading>The contrib archive area</heading>
+ <p>
+ The <em>contrib</em> archive area contains supplemental
+ packages intended to work with the Debian distribution, but
+ which require software outside of the distribution to either
+ build or function.
+ </p>
+
<p>
Every package in <em>contrib</em> must comply with the DFSG.
</p>
</list>
</p>
-
<p>
Examples of packages which would be included in
<em>contrib</em> are:
<sect1 id="non-free">
<heading>The non-free archive area</heading>
+ <p>
+ The <em>non-free</em> archive area contains supplemental
+ packages intended to work with the Debian distribution that do
+ not comply with the DFSG or have other problems that make
+ their distribution problematic. They may not comply with all
+ of the policy requirements in this manual due to restrictions
+ on modifications or other limitations.
+ </p>
+
<p>
Packages must be placed in <em>non-free</em> if they are
not compliant with the DFSG or are encumbered by patents
<heading>Binary packages</heading>
<p>
- The Debian GNU/Linux distribution is based on the Debian
+ The Debian distribution is based on the Debian
package management system, called <prgn>dpkg</prgn>. Thus,
all packages in the Debian distribution must be provided
in the <tt>.deb</tt> file format.
</sect>
- <sect>
+ <sect id="maintainer">
<heading>The maintainer of a package</heading>
<p>
- Every package must have a Debian maintainer (the
- maintainer may be one person or a group of people
- reachable from a common email address, such as a mailing
- list). The maintainer is responsible for ensuring that
- the package is placed in the appropriate distributions.
- </p>
-
- <p>
- The maintainer must be specified in the
- <tt>Maintainer</tt> control field with their correct name
- and a working email address. If one person maintains
- several packages, they should try to avoid having
- different forms of their name and email address in
+ Every package must have a maintainer, except for orphaned
+ packages as described below. The maintainer may be one person
+ or a group of people reachable from a common email address, such
+ as a mailing list. The maintainer is responsible for
+ maintaining the Debian packaging files, evaluating and
+ responding appropriately to reported bugs, uploading new
+ versions of the package (either directly or through a sponsor),
+ ensuring that the package is placed in the appropriate archive
+ area and included in Debian releases as appropriate for the
+ stability and utility of the package, and requesting removal of
+ the package from the Debian distribution if it is no longer
+ useful or maintainable.
+ </p>
+
+ <p>
+ The maintainer must be specified in the <tt>Maintainer</tt>
+ control field with their correct name and a working email
+ address. The email address given in the <tt>Maintainer</tt>
+ control field must accept mail from those role accounts in
+ Debian used to send automated mails regarding the package. This
+ includes non-spam mail from the bug-tracking system, all mail
+ from the Debian archive maintenance software, and other role
+ accounts or automated processes that are commonly agreed on by
+ the project.<footnote>
+ A sample implementation of such a whitelist written for the
+ Mailman mailing list management software is used for mailing
+ lists hosted by alioth.debian.org.
+ </footnote>
+ If one person or team maintains several packages, they should
+ use the same form of their name and email address in
the <tt>Maintainer</tt> fields of those packages.
</p>
</p>
<p>
- If the maintainer of a package quits from the Debian
- project, "Debian QA Group"
- <email>packages@qa.debian.org</email> takes over the
- maintainer-ship of the package until someone else
- volunteers for that task. These packages are called
- <em>orphaned packages</em>.<footnote>
- The detailed procedure for doing this gracefully can
- be found in the Debian Developer's Reference,
- see <ref id="related">.
+ If the maintainer of the package is a team of people with a
+ shared email address, the <tt>Uploaders</tt> control field must
+ be present and must contain at least one human with their
+ personal email address. See <ref id="f-Uploaders"> for the
+ syntax of that field.
+ </p>
+
+ <p>
+ An orphaned package is one with no current maintainer. Orphaned
+ packages should have their <tt>Maintainer</tt> control field set
+ to <tt>Debian QA Group <packages@qa.debian.org></tt>.
+ These packages are considered maintained by the Debian project
+ as a whole until someone else volunteers to take over
+ maintenance.<footnote>
+ The detailed procedure for gracefully orphaning a package can
+ be found in the Debian Developer's Reference
+ (see <ref id="related">).
</footnote>
</p>
</sect>
</sect>
- <sect>
+ <sect id="dependencies">
<heading>Dependencies</heading>
<p>
<p>
The <tt>base system</tt> is a minimum subset of the Debian
- GNU/Linux system that is installed before everything else
+ system that is installed before everything else
on a new system. Only very few packages are allowed to form
part of the base system, in order to keep the required disk
usage very small.
The maintainer name and email address used in the changelog
should be the details of the person uploading <em>this</em>
version. They are <em>not</em> necessarily those of the
- usual package maintainer. The information here will be
- copied to the <tt>Changed-By</tt> field in the
- <tt>.changes</tt> file (see <ref id="f-Changed-By">),
- and then later used to send an acknowledgement when the
- upload has been installed.
+ usual package maintainer.<footnote>
+ If the developer uploading the package is not one of the usual
+ maintainers of the package (as listed in
+ the <qref id="f-Maintainer"><tt>Maintainer</tt></qref>
+ or <qref id="f-Uploaders"><tt>Uploaders</tt></qref> control
+ fields of the package), the first line of the changelog is
+ conventionally used to explain why a non-maintainer is
+ uploading the package. The Debian Developer's Reference
+ (see <ref id="related">) documents the conventions
+ used.</footnote>
+ The information here will be copied to the <tt>Changed-By</tt>
+ field in the <tt>.changes</tt> file
+ (see <ref id="f-Changed-By">), and then later used to send an
+ acknowledgement when the upload has been installed.
</p>
<p>
identical behavior.
</p>
+ <p>
+ The following targets are required and must be implemented
+ by <file>debian/rules</file>: <tt>clean</tt>, <tt>binary</tt>,
+ <tt>binary-arch</tt>, <tt>binary-indep</tt>, and <tt>build</tt>.
+ These are the targets called by <prgn>dpkg-buildpackage</prgn>.
+ </p>
+
<p>
Since an interactive <file>debian/rules</file> script makes it
- impossible to auto-compile that package and also makes it
- hard for other people to reproduce the same binary
- package, all <em>required targets</em> must be
- non-interactive. At a minimum, required targets are the
- ones called by <prgn>dpkg-buildpackage</prgn>, namely,
- <em>clean</em>, <em>binary</em>, <em>binary-arch</em>,
- <em>binary-indep</em>, and <em>build</em>. It also follows
- that any target that these targets depend on must also be
+ impossible to auto-compile that package and also makes it hard
+ for other people to reproduce the same binary package, all
+ required targets must be non-interactive. It also follows that
+ any target that these targets depend on must also be
non-interactive.
</p>
<p>
- The targets are as follows (required unless stated otherwise):
+ The targets are as follows:
<taglist>
- <tag><tt>build</tt></tag>
+ <tag><tt>build</tt> (required)</tag>
<item>
<p>
The <tt>build</tt> target should perform all the
</p>
</item>
- <tag><tt>binary</tt>, <tt>binary-arch</tt>,
- <tt>binary-indep</tt>
+ <tag><tt>binary</tt> (required), <tt>binary-arch</tt>
+ (required), <tt>binary-indep</tt> (required)
</tag>
<item>
<p>
</p>
</item>
- <tag><tt>clean</tt></tag>
+ <tag><tt>clean</tt> (required)</tag>
<item>
<p>
This must undo any effects that the <tt>build</tt>
<p>
The architectures we build on and build for are determined
- by <prgn>make</prgn> variables using the utility
- <qref id="pkg-dpkg-architecture"><prgn>dpkg-architecture</prgn></qref>.
- You can determine the
- Debian architecture and the GNU style architecture
- specification string for the build machine (the machine type
- we are building on) as well as for the host machine (the
- machine type we are building for). Here is a list of
- supported <prgn>make</prgn> variables:
+ by <prgn>make</prgn> variables using the
+ utility <qref id="pkg-dpkg-architecture"><prgn>dpkg-architecture</prgn></qref>.
+ You can determine the Debian architecture and the GNU style
+ architecture specification string for the build architecture as
+ well as for the host architecture. The build architecture is
+ the architecture on which <file>debian/rules</file> is run and
+ the package build is performed. The host architecture is the
+ architecture on which the resulting package will be installed
+ and run. These are normally the same, but may be different in
+ the case of cross-compilation (building packages for one
+ architecture on machines of a different architecture).
+ </p>
+
+ <p>
+ Here is a list of supported <prgn>make</prgn> variables:
<list compact="compact">
<item>
<tt>DEB_*_ARCH</tt> (the Debian architecture)
<tt>DEB_*_GNU_TYPE</tt>)
</list>
where <tt>*</tt> is either <tt>BUILD</tt> for specification of
- the build machine or <tt>HOST</tt> for specification of the
- host machine.
+ the build architecture or <tt>HOST</tt> for specification of the
+ host architecture.
</p>
<p>
<heading>Variable substitutions: <file>debian/substvars</file></heading>
<p>
- When <prgn>dpkg-gencontrol</prgn>,
- <prgn>dpkg-genchanges</prgn> and <prgn>dpkg-source</prgn>
- generate control files, they perform variable substitutions
- on their output just before writing it. Variable
+ When <prgn>dpkg-gencontrol</prgn>
+ generates <qref id="binarycontrolfiles">binary package control
+ files</qref> (<file>DEBIAN/control</file>), it performs variable
+ substitutions on its output just before writing it. Variable
substitutions have the form <tt>${<var>variable</var>}</tt>.
The optional file <file>debian/substvars</file> contains
variable substitutions to be used; variables can also be set
directly from <file>debian/rules</file> using the <tt>-V</tt>
- option to the source packaging commands, and certain
- predefined variables are also available.
+ option to the source packaging commands, and certain predefined
+ variables are also available.
</p>
<p>
<item><qref id="f-Source"><tt>Source</tt></qref> (mandatory)</item>
<item><qref id="f-Maintainer"><tt>Maintainer</tt></qref> (mandatory)</item>
<item><qref id="f-Uploaders"><tt>Uploaders</tt></qref></item>
+ <item><qref id="f-DM-Upload-Allowed"><tt>DM-Upload-Allowed</tt></qref></item>
<item><qref id="f-Section"><tt>Section</tt></qref> (recommended)</item>
<item><qref id="f-Priority"><tt>Priority</tt></qref> (recommended)</item>
<item><qref id="sourcebinarydeps"><tt>Build-Depends</tt> et al</qref></item>
<item><qref id="f-Version"><tt>Version</tt></qref> (mandatory)</item>
<item><qref id="f-Maintainer"><tt>Maintainer</tt></qref> (mandatory)</item>
<item><qref id="f-Uploaders"><tt>Uploaders</tt></qref></item>
+ <item><qref id="f-DM-Upload-Allowed"><tt>DM-Upload-Allowed</tt></qref></item>
<item><qref id="f-Homepage"><tt>Homepage</tt></qref></item>
<item><qref id="f-Standards-Version"><tt>Standards-Version</tt></qref> (recommended)</item>
<item><qref id="sourcebinarydeps"><tt>Build-Depends</tt> et al</qref></item>
putting the name in round brackets and moving it to the
end, and bringing the email address forward).
</p>
+
+ <p>
+ See <ref id="maintainer"> for additional requirements and
+ information about package maintainers.
+ </p>
</sect1>
<sect1 id="f-Uploaders">
<heading><tt>Uploaders</tt></heading>
<p>
- List of the names and email addresses of co-maintainers of
- the package, if any. If the package has other maintainers
- beside the one named in the
- <qref id="f-Maintainer">Maintainer field</qref>, their names
- and email addresses should be listed here. The format of each
- entry is the same as that of the Maintainer field, and
- multiple entries must be comma separated. This is an optional
- field.
+ List of the names and email addresses of co-maintainers of the
+ package, if any. If the package has other maintainers besides
+ the one named in the <qref id="f-Maintainer">Maintainer
+ field</qref>, their names and email addresses should be listed
+ here. The format of each entry is the same as that of the
+ Maintainer field, and multiple entries must be comma
+ separated.
+ </p>
+
+ <p>
+ This is normally an optional field, but if
+ the <tt>Maintainer</tt> control field names a group of people
+ and a shared email address, the <tt>Uploaders</tt> field must
+ be present and must contain at least one human with their
+ personal email address.
</p>
<p>
must match the list of files in the <tt>Files</tt> field.
</p>
</sect1>
+
+ <sect1 id="f-DM-Upload-Allowed">
+ <heading><tt>DM-Upload-Allowed</tt></heading>
+
+ <p>
+ The most recent version of a package uploaded to unstable or
+ experimental must include the field <tt>DM-Upload-Allowed:
+ yes</tt> in the source section of its source control file for
+ the Debian archive to accept uploads signed with a key in the
+ Debian Maintainer keyring. See the General
+ Resolution <url id="http://www.debian.org/vote/2007/vote_003"
+ name="Endorse the concept of Debian Maintainers"> for more
+ details.
+ </p>
+ </sect1>
</sect>
<sect>
package. It is best to avoid this situation if
possible.
</p>
+
+ <p>
+ You should not specify a <tt>Pre-Depends</tt> entry for a
+ package before this has been discussed on the
+ <tt>debian-devel</tt> mailing list and a consensus about
+ doing that has been reached.
+ See <ref id="dependencies">.
</item>
</taglist>
</p>
</p>
<p>
- Packages involving shared libraries should be split up into
- several binary packages. This section mostly deals with how
- this separation is to be accomplished; rules for files within
- the shared library packages are in <ref id="libraries"> instead.
+ This section deals only with public shared libraries: shared
+ libraries that are placed in directories searched by the dynamic
+ linker by default or which are intended to be linked against
+ normally and possibly used by other, independent packages. Shared
+ libraries that are internal to a particular package or that are
+ only loaded as dynamic modules are not covered by this section and
+ are not subject to its requirements.
</p>
- <sect id="sharedlibs-runtime">
- <heading>Run-time shared libraries</heading>
+ <p>
+ A shared library is identified by the <tt>SONAME</tt> attribute
+ stored in its dynamic section. When a binary is linked against a
+ shared library, the <tt>SONAME</tt> of the shared library is
+ recorded in the binary's <tt>NEEDED</tt> section so that the
+ dynamic linker knows that library must be loaded at runtime. The
+ shared library file's full name (which usually contains additional
+ version information not needed in the <tt>SONAME</tt>) is
+ therefore normally not referenced directly. Instead, the shared
+ library is loaded by its <tt>SONAME</tt>, which exists on the file
+ system as a symlink pointing to the full name of the shared
+ library. This symlink must be provided by the
+ package. <ref id="sharedlibs-runtime"> describes how to do this.
+ <footnote>
+ This is a convention of shared library versioning, but not a
+ requirement. Some libraries use the <tt>SONAME</tt> as the full
+ library file name instead and therefore do not need a symlink.
+ Most, however, encode additional information about
+ backwards-compatible revisions as a minor version number in the
+ file name. The <tt>SONAME</tt> itself only changes when
+ binaries linked with the earlier version of the shared library
+ may no longer work, but the filename may change with each
+ release of the library. See <ref id="sharedlibs-runtime"> for
+ more information.
+ </footnote>
+ </p>
<p>
- The run-time shared library needs to be placed in a package
- whose name changes whenever the shared object version
- changes.<footnote>
- <p>
- Since it is common place to install several versions of a
- package that just provides shared libraries, it is a
- good idea that the library package should not
- contain any extraneous non-versioned files, unless they
- happen to be in versioned directories.</p>
- </footnote>
- The most common mechanism is to place it in a package
- called
- <package><var>libraryname</var><var>soversion</var></package>,
- where <file><var>soversion</var></file> is the version number
- in the soname of the shared library<footnote>
- The soname is the shared object name: it's the thing
- that has to match exactly between building an executable
- and running it for the dynamic linker to be able run the
- program. For example, if the soname of the library is
- <file>libfoo.so.6</file>, the library package would be
- called <file>libfoo6</file>.
- </footnote>.
- Alternatively, if it would be confusing to directly append
- <var>soversion</var> to <var>libraryname</var> (e.g. because
- <var>libraryname</var> itself ends in a number), you may use
- <package><var>libraryname</var>-<var>soversion</var></package> and
- <package><var>libraryname</var>-<var>soversion</var>-dev</package>
- instead.
+ When linking a binary or another shared library against a shared
+ library, the <tt>SONAME</tt> for that shared library is not yet
+ known. Instead, the shared library is found by looking for a file
+ matching the library name with <tt>.so</tt> appended. This file
+ exists on the file system as a symlink pointing to the shared
+ library.
+ </p>
+
+ <p>
+ Shared libraries are normally split into several binary packages.
+ The <tt>SONAME</tt> symlink is installed by the runtime shared
+ library package, and the bare <tt>.so</tt> symlink is installed in
+ the development package since it's only used when linking binaries
+ or shared libraries. However, there are some exceptions for
+ unusual shared libraries or for shared libraries that are also
+ loaded as dynamic modules by other programs.
</p>
<p>
- If you have several shared libraries built from the same
- source tree you may lump them all together into a single
- shared library package, provided that you change all of
- their sonames at once (so that you don't get filename
- clashes if you try to install different versions of the
- combined shared libraries package).
+ This section is primarily concerned with how the separation of
+ shared libraries into multiple packages should be done and how
+ dependencies on and between shared library binary packages are
+ managed in Debian. <ref id="libraries"> should be read in
+ conjunction with this section and contains additional rules for
+ the files contained in the shared library packages.
</p>
+ <sect id="sharedlibs-runtime">
+ <heading>Run-time shared libraries</heading>
+
+ <p>
+ The run-time shared library must be placed in a package
+ whose name changes whenever the <tt>SONAME</tt> of the shared
+ library changes. This allows several versions of the shared
+ library to be installed at the same time, allowing installation
+ of the new version of the shared library without immediately
+ breaking binaries that depend on the old version. Normally, the
+ run-time shared library and its <tt>SONAME</tt> symlink should
+ be placed in a package named
+ <package><var>libraryname</var><var>soversion</var></package>,
+ where <var>soversion</var> is the version number in
+ the <tt>SONAME</tt> of the shared library.
+ See <ref id="shlibs"> for detailed information on how to
+ determine this version. Alternatively, if it would be confusing
+ to directly append <var>soversion</var>
+ to <var>libraryname</var> (if, for example, <var>libraryname</var>
+ itself ends in a number), you should use
+ <package><var>libraryname</var>-<var>soversion</var></package>
+ instead.
+ </p>
+
+ <p>
+ If you have several shared libraries built from the same source
+ tree, you may lump them all together into a single shared
+ library package provided that all of their <tt>SONAME</tt>s will
+ always change together. Be aware that this is not normally the
+ case, and if the <tt>SONAME</tt>s do not change together,
+ upgrading such a merged shared library package will be
+ unnecessarily difficult because of file conflicts with the old
+ version of the package. When in doubt, always split shared
+ library packages so that each binary package installs a single
+ shared library.
+ </p>
+
+ <p>
+ Every time the shared library ABI changes in a way that may
+ break binaries linked against older versions of the shared
+ library, the <tt>SONAME</tt> of the library and the
+ corresponding name for the binary package containing the runtime
+ shared library should change. Normally, this means
+ the <tt>SONAME</tt> should change any time an interface is
+ removed from the shared library or the signature of an interface
+ (the number of parameters or the types of parameters that it
+ takes, for example) is changed. This practice is vital to
+ allowing clean upgrades from older versions of the package and
+ clean transitions between the old ABI and new ABI without having
+ to upgrade every affected package simultaneously.
+ </p>
+
+ <p>
+ The <tt>SONAME</tt> and binary package name need not, and indeed
+ normally should not, change if new interfaces are added but none
+ are removed or changed, since this will not break binaries
+ linked against the old shared library. Correct versioning of
+ dependencies on the newer shared library by binaries that use
+ the new interfaces is handled via
+ the <qref id="sharedlibs-shlibdeps"><tt>shlibs</tt>
+ system</qref> or via symbols files (see
+ <manref name="deb-symbols" section="5">).
+ </p>
+
<p>
The package should install the shared libraries under
their normal names. For example, the <package>libgdbm3</package>
</p>
<p>
- The run-time library package should include the symbolic link that
- <prgn>ldconfig</prgn> would create for the shared libraries.
- For example, the <package>libgdbm3</package> package should include
- a symbolic link from <file>/usr/lib/libgdbm.so.3</file> to
+ The run-time library package should include the symbolic link for
+ the <tt>SONAME</tt> that <prgn>ldconfig</prgn> would create for
+ the shared libraries. For example,
+ the <package>libgdbm3</package> package should include a symbolic
+ link from <file>/usr/lib/libgdbm.so.3</file> to
<file>libgdbm.so.3.0.0</file>. This is needed so that the dynamic
linker (for example <prgn>ld.so</prgn> or
<prgn>ld-linux.so.*</prgn>) can find the library between the
library directories of the dynamic linker (which are currently
<file>/usr/lib</file> and <file>/lib</file>) or a directory that is
listed in <file>/etc/ld.so.conf</file><footnote>
- These are currently
- <list compact="compact">
- <item>/usr/local/lib</item>
- <item>/usr/lib/libc5-compat</item>
- <item>/lib/libc5-compat</item>
- </list>
+ These are currently <file>/usr/local/lib</file> plus
+ directories under <file>/lib</file> and <file>/usr/lib</file>
+ matching the multiarch triplet for the system architecture.
</footnote>
must use <prgn>ldconfig</prgn> to update the shared library
system.
(<prgn>ld</prgn>) when compiling packages, as it will only look for
<file>libgdbm.so</file> when compiling dynamically.
</p>
+
+ <p>
+ If the package provides Ada Library Information
+ (<file>*.ali</file>) files for use with GNAT, these files must be
+ installed read-only (mode 0444) so that GNAT will not attempt to
+ recompile them. This overrides the normal file mode requirements
+ given in <ref id="permissions-owners">.
+ </p>
</sect>
<sect id="sharedlibs-intradeps">
<file>/lib/<var>triplet</var></file> and
<file>/usr/lib/<var>triplet</var></file>, where
<tt><var>triplet</var></tt> is the value returned by
- <tt>dpkg-architecture -qDEB_HOST_GNU_TYPE</tt> for the
+ <tt>dpkg-architecture -qDEB_HOST_MULTIARCH</tt> for the
architecture of the package. Packages may <em>not</em>
install files to any <var>triplet</var> path other
than the one matching the architecture of that package;
for instance, an <tt>Architecture: amd64</tt> package
containing 32-bit x86 libraries may not install these
- libraries to <file>/usr/lib/i486-linux-gnu</file>.
+ libraries to <file>/usr/lib/i386-linux-gnu</file>.
<footnote>
This is necessary in order to reserve the directories for
use in cross-installation of library packages from other
to get access to kernel information.</footnote>
</p>
</item>
+ <item>
+ <p>
+ On GNU/Hurd systems, the following additional
+ directories are allowed in the root
+ filesystem: <file>/hurd</file>
+ and <file>/servers</file>.<footnote>
+ These directories are used to store translators and as
+ a set of standard names for mount points,
+ respectively.
+ </footnote>
+ </p>
+ </item>
</enumlist>
-
</p>
+
<p>
The version of this document referred here can be
found in the <tt>debian-policy</tt> package or on <url
</example>
must be supported and must set the value of <tt>c</tt> to
<tt>delta</tt>.
- </item>
+ </item>
+ <item>The XSI extension to <prgn>kill</prgn> allowing <tt>kill
+ -<var>signal</var></tt>, where <var>signal</var> is either
+ the name of a signal or one of the numeric signals listed in
+ the XSI extension (0, 1, 2, 3, 6, 9, 14, and 15), must be
+ supported if <prgn>kill</prgn> is implemented as a shell
+ built-in.
+ </item>
+ <item>The XSI extension to <prgn>trap</prgn> allowing numeric
+ signals must be supported. In addition to the signal
+ numbers listed in the extension, which are the same as for
+ <prgn>kill</prgn> above, 13 (SIGPIPE) must be allowed.
+ </item>
</list>
If a shell script requires non-SUSv3 features from the shell
interpreter other than those listed above, the appropriate shell
</p>
<p>
- Log files must be rotated occasionally so that they don't
- grow indefinitely; the best way to do this is to drop a log
- rotation configuration file into the directory
- <file>/etc/logrotate.d</file> and use the facilities provided by
- logrotate.<footnote>
+ Log files must be rotated occasionally so that they don't grow
+ indefinitely. The best way to do this is to install a log
+ rotation configuration file in the
+ directory <file>/etc/logrotate.d</file>, normally
+ named <file>/etc/logrotate.d/<var>package</var></file>, and use
+ the facilities provided by <prgn>logrotate</prgn>.
+ <footnote>
<p>
The traditional approach to log files has been to set up
<em>ad hoc</em> log rotation schemes using simple shell
section="8">):
<example compact="compact">
/var/log/foo/*.log {
-rotate 12
-weekly
-compress
-postrotate
-/etc/init.d/foo force-reload
-endscript
+ rotate 12
+ weekly
+ compress
+ missingok
+ postrotate
+ start-stop-daemon -K -p /var/run/foo.pid -s HUP -x /usr/sbin/foo -q
+ endscript
}
</example>
This rotates all files under <file>/var/log/foo</file>, saves 12
- compressed generations, and forces the daemon to reload its
- configuration information after the log rotation.
+ compressed generations, and tells the daemon to reopen its log
+ files after the log rotation. It skips this log rotation
+ (via <tt>missingok</tt>) if no such log file is present, which
+ avoids errors if the package is removed but not purged.
</p>
<p>
</p>
</sect>
- <sect>
+ <sect id="permissions-owners">
<heading>Permissions and owners</heading>
<p>
<item>
If the window manager complies with <url
- id="http://www.freedesktop.org/Standards/wm-spec"
+ id="http://www.freedesktop.org/wiki/Specifications/wm-spec"
name="The Window Manager Specification Project">,
- written by the <url id="http://www.freedesktop.org/"
+ written by the <url id="http://www.freedesktop.org/wiki/"
name="Free Desktop Group">, add 40 points.
</item>
maintainer of the package is allowed to write this bug report
themselves, if they so desire). Do not close the bug report
until a proper man page is available.<footnote>
- It is not very hard to write a man page. See the
+ It is not very hard to write a man page. See the
<url id="http://www.schweikhardt.net/man_page_howto.html"
name="Man-Page-HOWTO">,
- <manref name="man" section="7">, the examples
- created by <prgn>debmake</prgn> or <prgn>dh_make</prgn>,
-
the helper program <prgn>help2man</prgn>, or the
- directory <file>/usr/share/doc/man-db/examples</file>.
+ <manref name="man" section="7">, the examples created
+ by <prgn>dh_make</prgn>, the helper
+ program <prgn>help2man</prgn>, or the
+ directory <file>/usr/share/doc/man-db/examples</file>.
</footnote>
</p>
<p>
Packages in the <em>contrib</em> or <em>non-free</em> archive
areas should state in the copyright file that the package is not
- part of the Debian GNU/Linux distribution and briefly explain
- why.
+ part of the Debian distribution and briefly explain why.
</p>
<p>
<prgn>dpkg</prgn> is a suite of programs for creating binary
package files and installing and removing them on Unix
systems.<footnote>
- <prgn>dpkg</prgn> is targeted primarily at Debian
- GNU/Linux, but may work on or be ported to other
- systems.
+ <prgn>dpkg</prgn> is targeted primarily at Debian, but may
+ work on or be ported to other systems.
</footnote>
</p>
</p>
<p>
- The Debian version of the FSF's GNU hello program is provided
- as an example for people wishing to create Debian
- packages. The Debian <prgn>debmake</prgn> package is
- recommended as a very helpful tool in creating and maintaining
- Debian packages. However, while the tools and examples are
- helpful, they do not replace the need to read and follow the
- Policy and Programmer's Manual.</p>
+ The Debian version of the FSF's GNU hello program is provided as
+ an example for people wishing to create Debian packages. However,
+ while the examples are helpful, they do not replace the need to
+ read and follow the Policy and Programmer's Manual.</p>
</appendix>
<appendix id="pkg-binarypkg">
projects / debian / debian-policy.git / blobdiff