in the <tt>.deb</tt> file format.
</p>
+ <p>
+ A <tt>.deb</tt> package contains two sets of files: a set of files
+ to install on the system when the package is installed, and a set
+ of files that provide additional metadata about the package or
+ which are executed when the package is installed or removed. This
+ second set of files is called <em>control information files</em>.
+ Among those files are the package maintainer scripts
+ and <file>control</file>, the <qref id="binarycontrolfiles">binary
+ package control file</qref> that contains the control fields for
+ the package. Other control information files
+ include <qref id="sharedlibs-shlibdeps">the <file>shlibs</file>
+ file</qref> used to store shared library dependency information
+ and the <file>conffiles</file> file that lists the package's
+ configuration files (described in <ref id="config-files">).
+ </p>
+
+ <p>
+ There is unfortunately a collision of terminology here between
+ control information files and files in the Debian control file
+ format. Throughout this document, a <em>control file</em> refers
+ to a file in the Debian control file format. These files are
+ documented in <ref id="controlfields">. Only files referred to
+ specifically as <em>control information files</em> are the files
+ included in the control information file member of
+ the <file>.deb</file> file format used by binary packages. Most
+ control information files are not in the Debian control file
+ format.
+ </p>
+
<sect>
<heading>The package name</heading>
<heading>The description of a package</heading>
<p>
- Every Debian package must have an extended description
- stored in the appropriate field of the control record.
- The technical information about the format of the
+ Every Debian package must have a <tt>Description</tt> control
+ field which contains a synopsis and extended description of the
+ package. Technical information about the format of the
<tt>Description</tt> field is in <ref id="f-Description">.
</p>
must be available and usable on the system at all times, even
when packages are in an unconfigured (but unpacked) state.
Packages are tagged <tt>essential</tt> for a system using the
- <tt>Essential</tt> control file field. The format of the
+ <tt>Essential</tt> control field. The format of the
<tt>Essential</tt> control field is described in <ref
id="f-Essential">.
</p>
</p>
<p>
- You should not use <prgn>dpkg-divert</prgn> on a file
- belonging to another package without consulting the
- maintainer of that package first.
+ You should not use <prgn>dpkg-divert</prgn> on a file belonging
+ to another package without consulting the maintainer of that
+ package first. When adding or removing diversions, package
+ maintainer scripts must provide the <tt>--package</tt> flag
+ to <prgn>dpkg-divert</prgn> and must not use <tt>--local</tt>.
</p>
<p>
<p>
Packages which use the Debian Configuration Management
- Specification may contain an additional
- <prgn>config</prgn> script and a <tt>templates</tt>
- file in their control archive<footnote>
- The control.tar.gz inside the .deb.
- See <manref name="deb" section="5">.
- </footnote>.
- The <prgn>config</prgn> script might be run before the
- <prgn>preinst</prgn> script, and before the package is unpacked
- or any of its dependencies or pre-dependencies are satisfied.
- Therefore it must work using only the tools present in
- <em>essential</em> packages.<footnote>
+ Specification may contain the additional control information
+ files <file>config</file>
+ and <file>templates</file>. <file>config</file> is an
+ additional maintainer script used for package configuration,
+ and <file>templates</file> contains templates used for user
+ prompting. The <prgn>config</prgn> script might be run before
+ the <prgn>preinst</prgn> script and before the package is
+ unpacked or any of its dependencies or pre-dependencies are
+ satisfied. Therefore it must work using only the tools
+ present in <em>essential</em> packages.<footnote>
<package>Debconf</package> or another tool that
implements the Debian Configuration Management
Specification will also be installed, and any
<p>
When <prgn>dpkg-gencontrol</prgn>,
<prgn>dpkg-genchanges</prgn> and <prgn>dpkg-source</prgn>
- generate control files they perform variable substitutions
+ generate control files, they perform variable substitutions
on their output just before writing it. Variable
substitutions have the form <tt>${<var>variable</var>}</tt>.
The optional file <file>debian/substvars</file> contains
<heading>Optional upstream source location: <file>debian/watch</file></heading>
<p>
- This is an optional, recommended control file for the
- <tt>uscan</tt> utility which defines how to automatically
- scan ftp or http sites for newly available updates of the
- package. This is used by <url id="
- http://dehs.alioth.debian.org/"> and other Debian QA tools
- to help with quality control and maintenance of the
+ This is an optional, recommended configuration file for the
+ <tt>uscan</tt> utility which defines how to automatically scan
+ ftp or http sites for newly available updates of the
+ package. This is used
+ by <url id="http://dehs.alioth.debian.org/"> and other Debian QA
+ tools to help with quality control and maintenance of the
distribution as a whole.
</p>
</p>
<p>
- These scripts are the files <prgn>preinst</prgn>,
- <prgn>postinst</prgn>, <prgn>prerm</prgn> and
- <prgn>postrm</prgn> in the control area of the package.
- They must be proper executable files; if they are scripts
- (which is recommended), they must start with the usual
- <tt>#!</tt> convention. They should be readable and
+ These scripts are the control information
+ files <prgn>preinst</prgn>, <prgn>postinst</prgn>, <prgn>prerm</prgn>
+ and <prgn>postrm</prgn>. They must be proper executable files;
+ if they are scripts (which is recommended), they must start with
+ the usual <tt>#!</tt> convention. They should be readable and
executable by anyone, and must not be world-writable.
</p>
they exit with a zero status if everything went well.
</p>
- Additionally, packages interacting with users using
- <tt>debconf</tt> in the <prgn>postinst</prgn> script should
- install a <prgn>config</prgn> script in the control area,
- see <ref id="maintscriptprompt"> for details.
- </p>
+ <p>
+ Additionally, packages interacting with users
+ using <prgn>debconf</prgn> in the <prgn>postinst</prgn> script
+ should install a <prgn>config</prgn> script as a control
+ information file. See <ref id="maintscriptprompt"> for details.
+ </p>
<p>
When a package is upgraded a combination of the scripts from
In the <tt>Depends</tt>, <tt>Recommends</tt>,
<tt>Suggests</tt>, <tt>Pre-Depends</tt>,
<tt>Build-Depends</tt> and <tt>Build-Depends-Indep</tt>
- control file fields of the package, which declare
+ control fields of the package, which declare
dependencies on other packages, the package names listed may
also include lists of alternative package names, separated
by vertical bar (pipe) symbols <tt>|</tt>. In such a case,
</p>
<p>
- All fields that specify build-time relationships
+ Relationships may be restricted to a certain set of
+ architectures. This is indicated in brackets after each
+ individual package name and the optional version specification.
+ The brackets enclose a list of Debian architecture names
+ separated by whitespace. Exclamation marks may be prepended to
+ each of the names. (It is not permitted for some names to be
+ prepended with exclamation marks while others aren't.)
+ </p>
+
+ <p>
+ For build relationship fields
(<tt>Build-Depends</tt>, <tt>Build-Depends-Indep</tt>,
- <tt>Build-Conflicts</tt> and <tt>Build-Conflicts-Indep</tt>)
- may be restricted to a certain set of architectures. This
- is indicated in brackets after each individual package name and
- the optional version specification. The brackets enclose a
- list of Debian architecture names separated by whitespace.
- Exclamation marks may be prepended to each of the names.
- (It is not permitted for some names to be prepended with
- exclamation marks while others aren't.) If the current Debian
- host architecture is not in this list and there are no
- exclamation marks in the list, or it is in the list with a
- prepended exclamation mark, the package name and the
- associated version specification are ignored completely for
- the purposes of defining the relationships.
+ <tt>Build-Conflicts</tt> and <tt>Build-Conflicts-Indep</tt>), if
+ the current Debian host architecture is not in this list and
+ there are no exclamation marks in the list, or it is in the list
+ with a prepended exclamation mark, the package name and the
+ associated version specification are ignored completely for the
+ purposes of defining the relationships.
</p>
<p>
<tt>gnumach-dev</tt> only on hurd-i386.
</p>
+ <p>
+ For binary relationship fields, the architecture restriction
+ syntax is only supported in the source package control
+ file <file>debian/control</file>. When the corresponding binary
+ package control file is generated, the relationship will either
+ be omitted or included without the architecture restriction
+ based on the architecture of the binary package. This means
+ that architecture restrictions must not be used in binary
+ relationship fields for architecture-independent packages
+ (<tt>Architecture: all</tt>).
+ </p>
+
+ <p>
+ For example:
+ <example compact="compact">
+Depends: foo [i386], bar [amd64]
+ </example>
+ becomes <tt>Depends: foo</tt> when the package is built on
+ the <tt>i386</tt> architecture, <tt>Depends: bar</tt> when the
+ package is built on the <tt>amd64</tt> architecture, and omitted
+ entirely in binary packages built on all other architectures.
+ </p>
+
<p>
If the architecture-restricted dependency is part of a set of
alternatives using <tt>|</tt>, that alternative is ignored
</p>
<p>
- All fields that specify build-time relationships may also be
- restricted to a certain set of architectures using architecture
- wildcards. The syntax for declaring such restrictions is the
- same as declaring restrictions using a certain set of
- architectures without architecture wildcards. For example:
+ Relationships may also be restricted to a certain set of
+ architectures using architecture wildcards. The syntax for
+ declaring such restrictions is the same as declaring
+ restrictions using a certain set of architectures without
+ architecture wildcards. For example:
<example compact="compact">
Build-Depends: foo [linux-any], bar [any-i386], baz [!linux-any]
</example>
<p>
This is done using the <tt>Depends</tt>, <tt>Pre-Depends</tt>,
<tt>Recommends</tt>, <tt>Suggests</tt>, <tt>Enhances</tt>,
- <tt>Breaks</tt> and <tt>Conflicts</tt> control file fields.
+ <tt>Breaks</tt> and <tt>Conflicts</tt> control fields.
<tt>Breaks</tt> is described in <ref id="breaks">, and
<tt>Conflicts</tt> is described in <ref id="conflicts">. The
rest are described below.
<p>
A <em>virtual package</em> is one which appears in the
- <tt>Provides</tt> control file field of another package.
- The effect is as if the package(s) which provide a
- particular virtual package name had been listed by name
- everywhere the virtual package name appears. (See also <ref
- id="virtual_pkg">)
+ <tt>Provides</tt> control field of another package. The effect
+ is as if the package(s) which provide a particular virtual
+ package name had been listed by name everywhere the virtual
+ package name appears. (See also <ref id="virtual_pkg">)
</p>
<p>
<p>
Packages can declare in their control file that they should
- overwrite files in certain other packages, or completely
- replace other packages. The <tt>Replaces</tt> control file
- field has these two distinct purposes.
+ overwrite files in certain other packages, or completely replace
+ other packages. The <tt>Replaces</tt> control field has these
+ two distinct purposes.
</p>
<sect1><heading>Overwriting files in other packages</heading>
<p>
This is done using the <tt>Build-Depends</tt>,
<tt>Build-Depends-Indep</tt>, <tt>Build-Conflicts</tt> and
- <tt>Build-Conflicts-Indep</tt> control file fields.
+ <tt>Build-Conflicts-Indep</tt> control fields.
</p>
<p>
<p><file>debian/shlibs.local</file></p>
<p>
- This lists overrides for this package. Its use is
- described below (see <ref id="shlibslocal">).
+ This lists overrides for this package. This file should
+ normally not be used, but may be needed temporarily in
+ unusual situations to work around bugs in other packages,
+ or in unusual cases where the normally declared dependency
+ information in the installed <file>shlibs</file> file for
+ a library cannot be used. This file overrides information
+ obtained from any other source.
</p>
</item>
<p>
When packages are being built,
any <file>debian/shlibs</file> files are copied into the
- control file area of the temporary build directory and
- given the name <file>shlibs</file>. These files give
- details of any shared libraries included in the same
- package.<footnote>
+ control information file area of the temporary build
+ directory and given the name <file>shlibs</file>. These
+ files give details of any shared libraries included in the
+ same package.<footnote>
An example may help here. Let us say that the source
package <tt>foo</tt> generates two binary
packages, <tt>libfoo2</tt> and <tt>foo-runtime</tt>.
field in the control file for this to work.
</p>
- <p>
- If <prgn>dpkg-shlibdeps</prgn> doesn't complain, you're
- done. If it does complain you might need to create your own
- <file>debian/shlibs.local</file> file, as explained below (see
- <ref id="shlibslocal">).
- </p>
-
<p>
If you have multiple binary packages, you will need to call
<prgn>dpkg-shlibdeps</prgn> on each one which contains
</example>
</footnote>
The version part is the part which comes after
- <tt>.so.</tt>, so in our case, it is <tt>1</tt>.
+ <tt>.so.</tt>, so in our case, it is <tt>1</tt>. The soname may
+ instead be of the form
+ <tt><var>name</var>-<var>major-version</var>.so</tt>, such
+ as <tt>libdb-4.8.so</tt>, in which case the name would
+ be <tt>libdb</tt> and the version would be <tt>4.8</tt>.
</p>
<p>
It is usual to call this file <file>debian/shlibs</file> (but if
you have multiple binary packages, you might want to call it
<file>debian/shlibs.<var>package</var></file> instead). Then
- let <file>debian/rules</file> install it in the control area:
+ let <file>debian/rules</file> install it in the control
+ information file area:
<example compact="compact">
install -m644 debian/shlibs debian/tmp/DEBIAN
</example>
install -m644 debian/shlibs.<var>package</var> debian/<var>package</var>/DEBIAN/shlibs
</example>
An alternative way of doing this is to create the
- <file>shlibs</file> file in the control area directly from
- <file>debian/rules</file> without using a <file>debian/shlibs</file>
- file at all,<footnote>
+ <file>shlibs</file> file in the control information file area
+ directly from <file>debian/rules</file> without using
+ a <file>debian/shlibs</file> file at all,<footnote>
This is what <prgn>dh_makeshlibs</prgn> in
the <package>debhelper</package> suite does. If your package
also has a udeb that provides a shared
packages.
</p>
</sect1>
-
- <sect1 id="shlibslocal">
- <heading>Writing the <file>debian/shlibs.local</file> file</heading>
-
- <p>
- This file is intended only as a <em>temporary</em> fix if
- your binaries or libraries depend on a library whose package
- does not yet provide a correct <file>shlibs</file> file.
- </p>
-
- <p>
- We will assume that you are trying to package a binary
- <tt>foo</tt>. When you try running
- <prgn>dpkg-shlibdeps</prgn> you get the following error
- message (<tt>-O</tt> displays the dependency information on
- <tt>stdout</tt> instead of writing it to
- <tt>debian/substvars</tt>, and the lines have been wrapped
- for ease of reading):
- <example compact="compact">
-$ dpkg-shlibdeps -O debian/tmp/usr/bin/foo
-dpkg-shlibdeps: warning: unable to find dependency
- information for shared library libbar (soname 1,
- path /usr/lib/libbar.so.1, dependency field Depends)
-shlibs:Depends=libc6 (>= 2.2.2-2)
- </example>
- You can then run <prgn>ldd</prgn> on the binary to find the
- full location of the library concerned:
- <example compact="compact">
-$ ldd foo
-libbar.so.1 => /usr/lib/libbar.so.1 (0x4001e000)
-libc.so.6 => /lib/libc.so.6 (0x40032000)
-/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
- </example>
- So the <prgn>foo</prgn> binary depends on the
- <prgn>libbar</prgn> shared library, but no package seems to
- provide a <file>*.shlibs</file> file handling
- <file>libbar.so.1</file> in <file>/var/lib/dpkg/info/</file>. Let's
- determine the package responsible:
- <example compact="compact">
-$ dpkg -S /usr/lib/libbar.so.1
-bar1: /usr/lib/libbar.so.1
-$ dpkg -s bar1 | grep Version
-Version: 1.0-1
- </example>
- This tells us that the <tt>bar1</tt> package, version 1.0-1,
- is the one we are using. Now we can file a bug against the
- <tt>bar1</tt> package and create our own
- <file>debian/shlibs.local</file> to locally fix the problem.
- Including the following line into your
- <file>debian/shlibs.local</file> file:
- <example compact="compact">
-libbar 1 bar1 (>= 1.0-1)
- </example>
- should allow the package build to work.
- </p>
-
- <p>
- As soon as the maintainer of <tt>bar1</tt> provides a
- correct <file>shlibs</file> file, you should remove this line
- from your <file>debian/shlibs.local</file> file. (You should
- probably also then have a versioned <tt>Build-Depends</tt>
- on <tt>bar1</tt> to help ensure that others do not have the
- same problem building your package.)
- </p>
- </sect1>
-
</sect>
-
</chapt>
this so programs should not fail if <prgn>newaliases</prgn>
cannot be found. Note that because of this, all MTA
packages must have <tt>Provides</tt>, <tt>Conflicts</tt> and
- <tt>Replaces: mail-transport-agent</tt> control file
- fields.
+ <tt>Replaces: mail-transport-agent</tt> control fields.
</p>
<p>
<p>
Packages that provide an X server that, directly or
indirectly, communicates with real input and display
- hardware should declare in their control data that they
- provide the virtual package <tt>xserver</tt>.<footnote>
+ hardware should declare in their <tt>Provides</tt> control
+ field that they provide the virtual
+ package <tt>xserver</tt>.<footnote>
This implements current practice, and provides an
actual policy for usage of the <tt>xserver</tt>
virtual package which appears in the virtual packages
<p>
Packages that provide a terminal emulator for the X Window
- System which meet the criteria listed below should declare
- in their control data that they provide the virtual
- package <tt>x-terminal-emulator</tt>. They should also
- register themselves as an alternative for
+ System which meet the criteria listed below should declare in
+ their <tt>Provides</tt> control field that they provide the
+ virtual package <tt>x-terminal-emulator</tt>. They should
+ also register themselves as an alternative for
<file>/usr/bin/x-terminal-emulator</file>, with a priority of
20.
</p>
<p>
Packages that provide a window manager should declare in
- their control data that they provide the virtual package
- <tt>x-window-manager</tt>. They should also register
- themselves as an alternative for
+ their <tt>Provides</tt> control field that they provide the
+ virtual package <tt>x-window-manager</tt>. They should also
+ register themselves as an alternative for
<file>/usr/bin/x-window-manager</file>, with a priority
calculated as follows:
<list compact="compact">
<item>
Font packages must declare a dependency on
- <tt>xfonts-utils</tt> in their control
- data.
+ <tt>xfonts-utils</tt> in their <tt>Depends</tt>
+ or <tt>Pre-Depends</tt> control field.
</item>
<item>
<p>
It is possible to put other files in the package control
- area, but this is not generally a good idea (though they
- will largely be ignored).
+ information file area, but this is not generally a good idea
+ (though they will largely be ignored).
</p>
<p>
- Here is a brief list of the control info files supported by
- <prgn>dpkg</prgn> and a summary of what they're used for.
+ Here is a brief list of the control information files supported
+
by <prgn>dpkg</prgn> and a summary of what they're used for.
</p>
<p>
<tag><tt>Package_Revision</tt></tag>
<item>
The Debian revision part of the package version was
- at one point in a separate control file field. This
+ at one point in a separate control field. This
field went through several names.
</item>
</heading>
<p>
- A package may contain a control area file called
+ A package may contain a control information file called
<tt>conffiles</tt>. This file should be a list of filenames
of configuration files needing automatic handling, separated
by newlines. The filenames should be absolute pathnames,
projects / debian / debian-policy.git / blobdiff