<tt><url name="/doc/developers-reference/"
id="http://www.debian.org/doc/developers-reference/"></tt>.
</p>
+
+ <p>
+ Finally, a <qref id="copyrightformat">specification for
+ machine-readable copyright files</qref> is maintained as part of
+ the <package>debian-policy</package> package using the same
+ procedure as the other policy documents. Use of this format is
+ optional.
+ </p>
</sect>
<sect id="definitions">
</tag>
<item>
<p>
- A package may also provide both of the targets
+ A package may also provide one or both of the targets
<tt>build-arch</tt> and <tt>build-indep</tt>.
The <tt>build-arch</tt> target, if provided, should
perform all the configuration and compilation required for
architecture-independent binary packages (those packages
for which the body of the <tt>Architecture</tt> field
in <tt>debian/control</tt> is <tt>all</tt>).
- The <tt>build</tt> target should depend on those of the
- targets <tt>build-arch</tt> and <tt>build-indep</tt> that
- are provided in the rules file.<footnote>
+ </p>
+
+ <p>
+ If <tt>build-arch</tt> or <tt>build-indep</tt> targets are
+ provided in the rules file, the <tt>build</tt> target
+ should either depend on those targets or take the same
+ actions as invoking those targets would perform.<footnote>
The intent of this split is so that binary-only builds
need not install the dependencies required for
the <tt>build-indep</tt> target. However, this is not
</p>
<p>
- Each paragraph consists of a series of data fields; each
- field consists of the field name, followed by a colon and
- then the data/value associated with that field. The field
- name is composed of printable ASCII characters (i.e.,
- characters that have values between 33 and 126, inclusive)
- except colon and must not with a begin with #. The
- field ends at the end of the line or at the end of the
- last continuation line (see below). Horizontal whitespace
- (spaces and tabs) may occur immediately before or after the
- value and is ignored there; it is conventional to put a
- single space after the colon. For example, a field might
- be:
+ Each paragraph consists of a series of data fields. Each field
+ consists of the field name followed by a colon and then the
+ data/value associated with that field. The field name is
+ composed of US-ASCII characters excluding control characters,
+ space, and colon (i.e., characters in the ranges 33-57 and
+ 59-126, inclusive). Field names must not begin with the comment
+ character, <tt>#</tt>.
+ </p>
+
+ <p>
+ The field ends at the end of the line or at the end of the last
+ continuation line (see below). Horizontal whitespace (spaces
+ and tabs) may occur immediately before or after the value and is
+ ignored there; it is conventional to put a single space after
+ the colon. For example, a field might be:
<example compact="compact">
Package: libc6
</example>
<p>
This file consists of a single paragraph, possibly surrounded by
a PGP signature. The fields of that paragraph are listed below.
- Their syntax is described above, in <ref id="pkg-controlfields">.
+ Their syntax is described above, in <ref id="controlsyntax">.
<list compact="compact">
<item><qref id="f-Format"><tt>Format</tt></qref> (mandatory)</item>
<heading><tt>DM-Upload-Allowed</tt></heading>
<p>
- The most recent version of a package uploaded to unstable or
- experimental must include the field <tt>DM-Upload-Allowed:
- yes</tt> in the source section of its source control file for
- the Debian archive to accept uploads signed with a key in the
- Debian Maintainer keyring. See the General
+ Indicates that Debian Maintainers may upload this package to
+ the Debian archive. The only valid value is <tt>yes</tt>. If
+ the field <tt>DM-Upload-Allowed: yes</tt> is present in the
+ source section of the source control file of the most recent
+ version of a package in unstable or experimental, the Debian
+ archive will accept uploads of this package signed with a key
+ in the Debian Maintainer keyring. See the General
Resolution <url id="http://www.debian.org/vote/2007/vote_003"
name="Endorse the concept of Debian Maintainers"> for more
details.
Relationships may be restricted to a certain set of
architectures. This is indicated in brackets after each
individual package name and the optional version specification.
- The brackets enclose a list of Debian architecture names
+ The brackets enclose a non-empty list of Debian architecture names
in the format described in <ref id="arch-spec">,
separated by whitespace. Exclamation marks may be prepended to
each of the names. (It is not permitted for some names to be
<heading>File System Structure</heading>
<p>
- The location of all installed files and directories must
- comply with the Filesystem Hierarchy Standard (FHS),
- version 2.3, with the exceptions noted below, and except
- where doing so would violate other terms of Debian
- Policy. The following exceptions to the FHS apply:
+ The location of all files and directories must comply with the
+ Filesystem Hierarchy Standard (FHS), version 2.3, with the
+ exceptions noted below, and except where doing so would
+ violate other terms of Debian Policy. The following
+ exceptions to the FHS apply:
<enumlist>
<item>
<p>
Packages must not include files or directories
under <file>/run</file>, or under the
- older <file>/var/run</file> and <file>/var/lock<file> paths.
+ older <file>/var/run</file> and <file>/var/lock</file> paths.
The latter paths will normally be symlinks or other
redirections to <file>/run</file> for backwards compatibility.
</p>
<p>
You may wish to restrict your script to SUSv3 features plus the
above set when possible so that it may use <file>/bin/sh</file>
- as its interpreter. If your script works with <prgn>dash</prgn>
- (originally called <prgn>ash</prgn>), it probably complies with
- the above requirements, but if you are in doubt, use
- <file>/bin/bash</file>.
+ as its interpreter. Checking your script
+ with <prgn>checkbashisms</prgn> from
+ the <package>devscripts</package> package or running your script
+ with <prgn>posh</prgn> may help uncover violations of the above
+ requirements. If in doubt whether a script complies with these
+ requirements, use <file>/bin/bash</file>.
</p>
<p>
You should not use the copyright file as a general <file>README</file>
file. If your package has such a file it should be
installed in <file>/usr/share/doc/<var>package</var>/README</file> or
- <file>README.Debian</file> or some other appropriate place.</p>
+ <file>README.Debian</file> or some other appropriate place.
+ </p>
+
+ <sect1 id="copyrightformat">
+ <heading>Machine-readable copyright information</heading>
+
+ <p>
+ A specification for a standard, machine-readable format
+ for <file>debian/copyright</file> files is maintained as part
+ of the <package>debian-policy</package> package. This
+ document may be found in the <file>copyright-format</file>
+ files in the <package>debian-policy</package> package. It is
+ also available from the Debian web mirrors at
+ <tt><url name="/doc/packaging-manuals/copyright-format/1.0/"
+ id="http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/"></tt>.
+ </p>
+
+ <p>
+ Use of this format is optional.
+ </p>
+ </sect1>
</sect>
<sect>