# flushing' operations, but should be populated with a list
# of trusted machines. Wildcards are not permitted
# bsmtp_domains - Domains that we deliver locally via bsmtp
-<%- if nodeinfo['mailrelay'] -%>
+<%- if @is_mailrelay -%>
# mailhubdomains - Domains for which we are the MX, but the mail is relayed
# elsewhere. This is designed for use with small volume or
# restricted machines that need to use a smarthost for mail
# MAIN CONFIGURATION SETTINGS #
######################################################################
-<%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
+<%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
perl_startup = do '/etc/exim4/exim_surbl.pl'
<%- end -%>
acl_smtp_helo = check_helo
acl_smtp_rcpt = ${if ={$interface_port}{587} {check_submission}{check_recipient}}
acl_smtp_data = check_message
-<%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
+<%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
acl_smtp_mime = acl_check_mime
<%- end -%>
acl_smtp_predata = acl_check_predata
domainlist handled_domains = +local_domains : +virtual_domains : +bsmtp_domains
+domainlist ourself_and_handled = $primary_hostname : +handled_domains
+
localpartlist local_only_users = lsearch;/etc/exim4/localusers
localpartlist postmasterish = postmaster : abuse : hostmaster
hostlist debianhosts = <; ; 127.0.0.1 ; ::1 ; /var/lib/misc/thishost/debianhosts ; 89.16.166.49 ; 82.195.75.76 ; 2001:41b8:202:deb:bab5:0:52c3:4b4c
-hostlist reservedaddrs = <%= nodeinfo['reservedaddrs'] %>
+hostlist reservedaddrs = 0.0.0.0/8 : 127.0.0.0/8 : 10.0.0.0/8 : 169.254.0.0/16 : 172.16.0.0/12 : 192.0.0.0/24 : 192.168.0.0/16 : 224.0.0.0/4 : 240.0.0.0/5 : 248.0.0.0/5
-<%- if nodeinfo['mailrelay'] -%>
+<%- if @is_mailrelay -%>
# Domains we relay for; that is domains that aren't considered local but we
# accept mail for them.
domainlist mailhubdomains = lsearch;/etc/exim4/manualroute
<%- end -%>
-<%- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true" -%>
tls_certificate = /etc/exim4/ssl/thishost.crt
tls_privatekey = /etc/exim4/ssl/thishost.key
tls_try_verify_hosts = *
tls_verify_certificates = /etc/exim4/ssl/ca.crt
tls_crl = /etc/exim4/ssl/ca.crl
-<%- end -%>
# The setting below causes Exim to do a reverse DNS lookup on all incoming
# IP calls, in order to get the true host name. If you feel this is too
# expensive, you can specify the networks for which a lookup is done, or
untrusted_set_sender = *
+# Some spam scanners (*cough* irritated *cough*) want the Sender field
+# to exist. Appease them by not actually adding a Sender field.
+
+local_from_check = false
+
# Some operating systems use the "gecos" field in the system password file
# to hold other information in addition to users' real names. Exim looks up
# this field when it is creating "sender" and "from" headers. If these options
message_size_limit = 100M
message_logs = false
smtp_accept_max_per_host = ${if match_ip {$sender_host_address}{+debianhosts}{0}{7}}
-<%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
+<%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
smtp_accept_max = 300
smtp_accept_queue = 200
smtp_accept_queue_per_connection = 50
delay_warning =
-<%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
+<%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
message_body_visible = 5000
queue_run_max = 50
deliver_queue_load_max = 50
smtp_load_reserve = 20
<%- else -%>
queue_run_max = 5
+<%- if scope.lookupvar('::processorcount').to_s != 'undefined' -%>
+deliver_queue_load_max = <%= [scope.lookupvar('::processorcount').to_i,2].max * 5 %>
+queue_only_load = <%= [scope.lookupvar('::processorcount').to_i,2].max * 4 %>
+<%- else -%>
deliver_queue_load_max = 10
-queue_only_load = 5
+queue_only_load = 8
+<%- end -%>
<%- end -%>
queue_list_requires_admin = false
out = "daemon_smtp_ports = "
ports << 25
-if nodeinfo['bugsmaster'] or nodeinfo['bugsmx']
+if @is_bugsmaster or @is_bugsmx
ports << 587
end
-if not nodeinfo['mail_port'].to_s.empty?
- ports << nodeinfo['mail_port']
+if not scope.lookupvar('site::nodeinfo')['mail_port'].to_s.empty?
+ ports << scope.lookupvar('site::nodeinfo')['mail_port']
end
-if nodeinfo['mailrelay']
- ports << nodeinfo['smarthost_port']
+if @is_mailrelay
+ ports << scope.lookupvar('site::nodeinfo')['smarthost_port']
end
out += ports.uniq.sort.join(" : ")
remote_sort_domains = *.debian.org:*.debian.net
pipelining_advertise_hosts = !*
-<%- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true" -%>
tls_advertise_hosts = *
-<%- end -%>
smtp_enforce_sync = true
log_selector = +tls_cipher +tls_peerdn +queue_time +deliver_time +smtp_connection +smtp_incomplete_transaction +smtp_confirmation
# macro definitions.
# Do not wrap!
VDOMAINDATA = ${lookup{$domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
+VSENDERDOMAINDATA = ${lookup{$sender_address_domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
WHITELIST = ${if match_domain{$domain}{+virtual_domains}\
{${if exists {${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}\
{${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}{$value}{}}}{}}}\
hosts = !+debianhosts
set acl_m_rprf = localonly
+<%- if @is_mailrelay -%>
+ warn local_parts = +local_only_users
+ domains = +mailhubdomains
+ hosts = !+debianhosts
+ set acl_m_rprf = localonly
+
+<%- end -%>
accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
-<%- if nodeinfo['rtmaster'] -%>
+<%- if @is_rtmaster -%>
warn domains = rt.debian.org
set acl_m_rprf = RTMail
accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
<%- end -%>
-<%- if nodeinfo['bugsmx'] -%>
+<%- if @is_bugsmaster or @is_bugsmx -%>
warn domains = bugs.debian.org
set acl_m_rprf = BugsMail
accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
<%- end -%>
-<%- if nodeinfo['packagesmaster'] -%>
+<%- if @is_packagesmaster -%>
warn domains = packages.debian.org
set acl_m_rprf = PackagesMail
accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
<%- end -%>
-<%- if nodeinfo['packagesqamaster'] -%>
+<%- if @is_packagesqamaster -%>
warn recipients = owner@packages.qa.debian.org : postmaster@packages.qa.debian.org
set acl_m_rprf = PTSOwner
warn set acl_c_scr = 0
-<%- if nodeinfo['mailrelay'] -%>
+<%- if @is_mailrelay -%>
accept verify = certificate
<%- end -%>
-<%- if nodeinfo['smarthost'].empty? -%>
+<%- if scope.lookupvar('site::nodeinfo')['smarthost'].empty? -%>
# These are in HELO acl so that they are only run once. They increment a counter,
# so we don't want it to increment per rcpt to.
# We do this by testing for an empty sending host field.
accept hosts = +debianhosts
-<%- if nodeinfo['mailrelay'] -%>
+<%- if @is_mailrelay -%>
accept verify = certificate
<%- end -%>
endpass
verify = recipient
-<%- if nodeinfo['mailrelay'] -%>
+<%- if @is_mailrelay -%>
accept domains = +mailhubdomains
endpass
verify = recipient/callout=30s,defer_ok,use_sender,no_cache
#!!# ACL that is used after the RCPT command
check_recipient:
-<%- if nodeinfo['mailrelay'] -%>
+<%- if @is_mailrelay -%>
accept verify = certificate
<%- end -%>
drop !hosts = +debianhosts
!acl = acl_spamlovers
- condition = ${if match_domain{$sender_helo_name}{$primary_hostname:+handled_domains}}
+ condition = ${if match_domain{$sender_helo_name}{+ourself_and_handled}}
condition = ${if !match{$sender_host_name}{${rxquote:$sender_helo_name}\N$\N}}
message = HELO mismatch Forged HELO for ($sender_helo_name)
message = mail from <$sender_address> not allowed externally
deny sender_domains= +virtual_domains
- condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localusers}}}}
- condition = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/localusers}}}{true}}
+ condition = ${if exists {${extract{directory}{VSENDERDOMAINDATA}{${value}/localusers}}}}
+ condition = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VSENDERDOMAINDATA}{${value}/localusers}}}{true}}
hosts = !+debianhosts
message = mail from <$sender_address> not allowed externally
deny condition = ${if match_domain{$sender_address_domain}{+virtual_domains}{1}{0}}
- condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
- condition = ${if match_local_part {$sender_address_local_part}{${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
+ condition = ${if exists {${extract{directory}{VSENDERDOMAINDATA}{${value}/neversenders}}}{1}{0}}
+ condition = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VSENDERDOMAINDATA}{${value}/neversenders}}}{true}}
message = no mail should ever come from <$sender_address>
warn condition = ${if eq{$acl_m_prf}{localonly}}
set acl_m_lrc = ${if eq{$acl_m_lrc}{}{$local_part@$domain}{$acl_m_lrc, $local_part@$domain}}
-<%- if nodeinfo['packagesmaster'] -%>
+<%- if @is_packagesmaster -%>
warn condition = ${if eq {$acl_m_prf}{PackagesMail}}
condition = ${if eq {$sender_address}{$local_part@$domain}}
message = X-Packages-FromTo-Same: yes
condition = ${if eq{$acl_m_act}{450}{yes}{no}}
<%- end -%>
-<%- if nodeinfo['rtmaster'] -%>
+<%- if @is_rtmaster -%>
warn condition = ${if eq{$acl_m_prf}{RTMail}}
- set acl_m12 = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}{match{$local_part}{3520}}} {RTMailRecipientHasSubaddress}}}}
- # temporary hack because weasel screwed up and gave people an rt-3520@ address, which doesn't really work normally.
+ set acl_m12 = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}{match{$local_part}{3520}}{match{$local_part}{3645}}} {RTMailRecipientHasSubaddress}}}}
+ # temporary hack because weasel screwed up and gave people an rt-3520@ address, which doesn't really work normally. and rt-3645
#set acl_m12 = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}} {RTMailRecipientHasSubaddress}}}}
message = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
<%- end -%>
- accept local_parts = +postmasterish
- domains = +handled_domains
-
deny hosts = ${if exists{/etc/exim4/host_blacklist}{/etc/exim4/host_blacklist}{}}
message = I'm terribly sorry, but it seems you have been blacklisted
log_message = blacklisted IP
senders = ${if exists{/etc/exim4/blacklist}{/etc/exim4/blacklist}{}}
message = We have blacklisted <$sender_address>. Please stop mailing us
-<%- if nodeinfo['smarthost'].empty? -%>
+ accept local_parts = +postmasterish
+ domains = +virtual_domains : +bsmtp_domains
+
+<%- if scope.lookupvar('site::nodeinfo')['smarthost'].empty? -%>
deny message = host $sender_host_address is listed in $dnslist_domain; see $dnslist_text
dnslists = ${if match_domain{$domain}{+virtual_domains}\
{${if exists {${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}\
domains = +handled_domains
!hosts = +debianhosts : WHITELIST
-<%- if nodeinfo['smarthost'].empty? -%>
+<%- if scope.lookupvar('site::nodeinfo')['smarthost'].empty? -%>
deny domains = +handled_domains
local_parts = ${if match_domain{$domain}{+virtual_domains}\
{${if exists {${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}\
${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-callout}{$local_part}{}}
!hosts = +debianhosts : WHITELIST
!verify = sender/callout=90s,maxwait=300s
+ message = "Sender verification failed: $acl_verify_message"
<%- end -%>
-<%- if nodeinfo['mailrelay'] -%>
+<%- if @is_mailrelay -%>
accept domains = +mailhubdomains
endpass
verify = recipient/callout=30s,defer_ok,use_sender,no_cache
deny message = relay not permitted
-<%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
+<%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
acl_check_mime:
accept verify = certificate
#!!# ACL that is used after the DATA command
check_message:
-<%- if nodeinfo['rtmaster'] -%>
+
+ # Some people put from hostmaster@something.debian.org in the From
+ # header. Take their crack pipe away.
+ drop condition = ${if match{${lc:$h_From:}}{\Npostmaster@([^.]+\.)?debian\.org\N}}
+
+<%- if @is_rtmaster -%>
deny condition = ${if eq {$acl_m_prf}{RTMail}}
condition = ${if and{{!match {${lc:$rh_Subject:}} {debian rt}} \
{!match {${lc:$rh_Subject:]}} {\N\[rt.debian.org \N}} \
message = messages to the Request Tracker system require a subject tag or a subaddress
<%- end -%>
-<%- if nodeinfo['packagesqamaster'] -%>
- deny !hosts = +debianhosts : 217.196.43.134
+<%- if @is_packagesqamaster -%>
+ deny !hosts = +debianhosts : 5.153.231.21
condition = ${if eq {$acl_m_prf}{PTSMail}}
condition = ${if def:h_X-PTS-Approved:{false}{true}}
message = messages to the PTS require an X-PTS-Approved header
deny condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
!verify = header_syntax
- message = Invalid syntax in the header
+ message = Invalid header syntax: $acl_verify_message
# RFC 822 and 2822 say that headers must be ASCII. This kinda emulates
# postfix's strict_7bit_headers option, but only checks a few common problem
message = X-malware detected: $malware_name
<%- end -%>
-<%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
+<%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
discard condition = ${if <{$message_size}{256000}}
condition = ${if eq {$acl_m_prf}{blackhole}}
set acl_m_srb = ${perl{surblspamcheck}}
!verify = header_sender
message = No valid sender found in the From:, Sender: and Reply-to: headers
-<%- if nodeinfo['packagesmaster'] -%>
+<%- if @is_packagesmaster -%>
deny message = Congratulations, you scored $spam_score points.
log_message = spam: $spam_score points.
condition = ${if eq {$acl_m_prf}{PackagesMail}}
# An address is passed to each in turn until it is accepted. #
######################################################################
-<%- if nodeinfo['mailrelay'] -%>
+<%- if @is_mailrelay -%>
relay_manualroute:
driver = manualroute
domains = +mailhubdomains
<%=
out = ""
-if not nodeinfo['smarthost'].empty?
-out = '
+if not scope.lookupvar('site::nodeinfo')['smarthost'].empty?
+out = "
smarthost:
- debug_print = "R: smarthost for $local_part@$domain"
+ debug_print = \"R: smarthost for $local_part@$domain\"
driver = manualroute
domains = !+handled_domains
transport = remote_smtp_smarthost
- route_list = * ' + nodeinfo['smarthost']
- if nodeinfo['smarthost'] == 'mailout.debian.org'
- out += '/MX'
- end
- out += '
+ route_list = * #{scope.lookupvar('site::nodeinfo')['smarthost']}
host_find_failed = defer
same_domain_copy_routing = yes
no_more
-'
+"
end
out
%>
unseen = true
expn = true
local_parts = +postmasterish
- domains = +handled_domains
+ domains = +virtual_domains : +bsmtp_domains
data = debian-admin@debian.org
headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
user = Debian-exim
no_check_local_user
directory_transport = address_directory
-<%- if fqdn == "master.debian.org" -%>
- domains = +local_domains : debian.org
-<%- else -%>
domains = +local_domains
-<%- end -%>
# filter - I have disabled filtering to force users to use .forward-foo files
# or procmail. This will make it easier to move mailers in the future
#
check_ancestor
check_local_user
directory_transport = address_directory
-<%- if fqdn == "master.debian.org" -%>
- domains = +local_domains : debian.org
-<%- else -%>
domains = +local_domains
-<%- end -%>
# filter - I have disabled filtering to force users to use .forward-foo files
# or procmail. This will make it easier to move mailers in the future
#
debug_print = "R: procmail for $local_part@$domain"
driver = accept
check_local_user
-<%- if fqdn == "master.debian.org" -%>
- domains = +local_domains : debian.org
-<%- else -%>
domains = +local_domains
-<%- end -%>
headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
local_part_suffix = -*
local_part_suffix_optional
# Everything before here should apply only to the local domains with a
# domains= rule
-<%- if nodeinfo['packagesmaster'] -%>
+<%- if @is_packagesmaster -%>
# This router delivers for packages.d.o
packages:
debug_print = "R: packages for $local_part@$domain"
file_transport = address_file
pipe_transport = address_pipe
domains = packages.debian.org
- require_files = /org/packages.debian.org/conf/maintainer
- data = ${lookup{$local_part}cdb{/org/packages.debian.org/conf/maintainer.cdb}}
+ require_files = /srv/packages.debian.org/conf/maintainer
+ data = ${lookup{$local_part}cdb{/srv/packages.debian.org/conf/maintainer.cdb}}
headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
- transport_home_directory = /org/packages.debian.org/mail
- transport_current_directory = /org/packages.debian.org/mail
+ transport_home_directory = /srv/packages.debian.org/mail
+ transport_current_directory = /srv/packages.debian.org/mail
check_ancestor
retry_use_local_part
no_more
<%- end -%>
-<%- if nodeinfo['rtmaster'] -%>
+<%- if @is_rtmaster -%>
# This router delivers for rt.d.o
rt_force_new_verbose:
debug_print = "R: rt for $local_part+new@$domain"
local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
local_part_suffix = +new
pipe_transport = rt_pipe
- data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
+ data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
headers_remove = Subject
headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
local_part_suffix = +new-quiesce
pipe_transport = rt_pipe
- data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
+ data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
headers_remove = Subject
headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nX-RT-Mode: quiesce\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
driver = redirect
domains = rt.debian.org
require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
- local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
+ local_parts = ${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
local_part_suffix = +*
local_part_suffix_optional
pipe_transport = rt_pipe
- data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --extension ticket --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
+ data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --extension ticket --action ${if match{$local_part}{.*-comment.*}{comment}{${if match{$local_part}{.*-done.*}{correspond-resolve}{correspond}}}}"
headers_remove = Subject
headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
-
<%- end -%>
# exim4 fails the router if it can't change to the user/group for delivery
transport_current_directory = ${extract{directory}{VDOMAINDATA}}
user = ${extract{user}{VDOMAINDATA}}
group = ${extract{group}{VDOMAINDATA}}
- data = ${if exists{${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}\
- {${lookup{$local_part}cdb\
- {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}
+ # Manually construct the forwarding address, preserving the
+ # local_part_suffix if the remote host is master.
+ data = ${if and {{exists{${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}\
+ {! eq {${lookup{$local_part}cdb\
+ {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}\
+ {}}}\
+ {${local_part:${lookup{$local_part}cdb\
+ {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}\
+ ${if eq {${domain:${lookup{$local_part}cdb\
+ {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}{master.debian.org}{$local_part_suffix} {}}\
+ @\
+ ${domain:${lookup{$local_part}cdb\
+ {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}}
domains = +virtual_domains
file_transport = address_file
headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
<%=
out = ""
-if nodeinfo['bugsmaster'] or nodeinfo['bugsmx']
+if @is_bugsmaster or @is_bugsmx
domain = 'bugs.debian.org'
- if nodeinfo['bugsmaster']
+ if @is_bugsmaster
domain = 'bugs-master.debian.org'
end
out = '
remote_smtp:
driver = smtp
- connect_timeout = 1m
+ connect_timeout = 15s
delay_after_cutoff = false
-<%- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true" -%>
tls_certificate = /etc/exim4/ssl/thishost.crt
tls_privatekey = /etc/exim4/ssl/thishost.key
-<%- end -%>
<%=
out = ""
-if not nodeinfo['smarthost'].empty?
+if not scope.lookupvar('site::nodeinfo')['smarthost'].empty?
out = '
remote_smtp_smarthost:
debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
driver = smtp
delay_after_cutoff = false
port = '
- out += nodeinfo['smarthost_port'].to_s + "\n"
- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true"
- out += ' tls_tempfail_tryclear = false
- hosts_require_tls = ' + nodeinfo['smarthost'] + '
+ out += scope.lookupvar('site::nodeinfo')['smarthost_port'].to_s + "\n"
+ out += ' tls_tempfail_tryclear = false
+ hosts_require_tls = ' + scope.lookupvar('site::nodeinfo')['smarthost'] + '
tls_certificate = /etc/exim4/ssl/thishost.crt
tls_privatekey = /etc/exim4/ssl/thishost.key
'
- end
end
out
%>
{$value}fail}\
}}
-<%- if nodeinfo['bugsmaster'] or nodeinfo['bugsmx'] -%>
+<%- if @is_bugsmaster or @is_bugsmx -%>
bugs_pipe:
driver = pipe
command = /org/bugs.debian.org/mail/run-procmail
user = debbugs
<%- end -%>
-<%- if nodeinfo['rtmaster'] -%>
+<%- if @is_rtmaster -%>
rt_pipe:
debug_print = "T: rt_pipe for $local_part${local_part_suffix}@$domain"
driver = pipe