msgid ""
msgstr ""
"Project-Id-Version: debhelper manpages\n"
-"POT-Creation-Date: 2011-04-05 13:17-0400\n"
+"POT-Creation-Date: 2011-07-19 23:26-0400\n"
"PO-Revision-Date: 2011-04-03 17:37+0200\n"
"Last-Translator: Valery Perrin <valery.perrin.debian@free.fr>\n"
"Language-Team: Français <debian-l10n-french@lists.debian.org>\n"
#. type: textblock
#: debhelper.pod:194
msgid ""
+"All of the B<dh_auto_>I<*> debhelper programs set environment variables "
+"listed by B<dpkg-buildflags>, unless they are already set. They support "
+"DEB_BUILD_OPTIONS=noopt too."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:198
+msgid ""
"The following command line options are supported by all of the "
"B<dh_auto_>I<*> debhelper programs. These programs support a variety of "
"build systems, and normally heuristically determine which to use, and how to "
# type: =item
#. type: =item
-#: debhelper.pod:201
+#: debhelper.pod:205
msgid "B<-S>I<buildsystem>, B<--buildsystem=>I<buildsystem>"
msgstr ""
"B<-S>I<processus de construction>, B<--buildsystem=>I<processus de "
"construction>"
#. type: textblock
-#: debhelper.pod:203
+#: debhelper.pod:207
msgid ""
"Force use of the specified I<buildsystem>, instead of trying to auto-select "
"one which might be applicable for the package."
# type: =item
#. type: =item
-#: debhelper.pod:206
+#: debhelper.pod:210
msgid "B<-D>I<directory>, B<--sourcedirectory=>I<directory>"
msgstr "B<-D>I<répertoire>, B<--sourcedirectory=>I<répertoire>"
#. type: textblock
-#: debhelper.pod:208
+#: debhelper.pod:212
msgid ""
"Assume that the original package source tree is at the specified "
"I<directory> rather than the top level directory of the Debian source "
# type: =item
#. type: =item
-#: debhelper.pod:212
+#: debhelper.pod:216
msgid "B<-B>[I<directory>], B<--builddirectory=>[I<directory>]"
msgstr "B<-B>[I<répertoire>], B<--builddirectory=>[I<répertoire>]"
#. type: textblock
-#: debhelper.pod:214
+#: debhelper.pod:218
msgid ""
"Enable out of source building and use the specified I<directory> as the "
"build directory. If I<directory> parameter is omitted, a default build "
"sera choisi."
#. type: textblock
-#: debhelper.pod:218
+#: debhelper.pod:222
msgid ""
"If this option is not specified, building will be done in source by default "
"unless the build system requires or prefers out of source tree building. In "
"utilisé même si B<--builddirectory> n'est pas spécifié."
#. type: textblock
-#: debhelper.pod:223
+#: debhelper.pod:227
msgid ""
"If the build system prefers out of source tree building but still allows in "
"source building, the latter can be re-enabled by passing a build directory "
# type: =item
#. type: =item
-#: debhelper.pod:227
+#: debhelper.pod:231
msgid "B<--parallel>"
msgstr "B<--parallel>"
#. type: textblock
-#: debhelper.pod:229
+#: debhelper.pod:233
msgid ""
"Enable parallel builds if underlying build system supports them. The number "
"of parallel jobs is controlled by the B<DEB_BUILD_OPTIONS> environment "
"spécifiques du système."
#. type: textblock
-#: debhelper.pod:234
+#: debhelper.pod:238
msgid ""
"If this option is not specified, debhelper currently defaults to not "
"allowing parallel package builds."
"le parallélisme lors de la construction."
#. type: =item
-#: debhelper.pod:237
+#: debhelper.pod:241
msgid "B<--max-parallel=>I<maximum>"
msgstr "B<--max-parallel=>I<maximum>"
#. type: textblock
-#: debhelper.pod:239
+#: debhelper.pod:243
msgid ""
"This option implies B<--parallel> and allows further limiting the number of "
"jobs that can be used in a parallel build. If the package build is known to "
# type: =item
#. type: =item
-#: debhelper.pod:244 dh:52
+#: debhelper.pod:248 dh:52
msgid "B<--list>, B<-l>"
msgstr "B<--list>, B<-l>"
#. type: textblock
-#: debhelper.pod:246
+#: debhelper.pod:250
msgid ""
"List all build systems supported by debhelper on this system. The list "
"includes both default and third party build systems (marked as such). Also "
"construction automatiquement sélectionné ou celui spécifié manuellement avec "
"l'option B<--buildsystem>."
-# type: =head1
#. type: =head1
-#: debhelper.pod:253 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116
-#: dh_installemacsen:67 dh_installexamples:53 dh_installinit:133
-#: dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55
-#: dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68
-#: dh_usrlocal:49
-msgid "NOTES"
-msgstr "REMARQUES"
-
-# type: =head2
-#. type: =head2
-#: debhelper.pod:255
-msgid "Multiple binary package support"
-msgstr "Prise en charge de plusieurs paquets binaires"
-
-# type: textblock
-#. type: textblock
#: debhelper.pod:257
-msgid ""
-"If your source package generates more than one binary package, debhelper "
-"programs will default to acting on all binary packages when run. If your "
-"source package happens to generate one architecture dependent package, and "
-"another architecture independent package, this is not the correct behavior, "
-"because you need to generate the architecture dependent packages in the "
-"binary-arch F<debian/rules> target, and the architecture independent "
-"packages in the binary-indep F<debian/rules> target."
-msgstr ""
-"Si le paquet source produit plus d'un paquet binaire, les programmes de "
-"debhelper construiront tous les paquets binaires. Si le paquet source doit "
-"construire un paquet dépendant de l'architecture, et un paquet indépendant "
-"de l'architecture, ce comportement ne conviendra pas. En effet, il convient "
-"de construire les paquets dépendants de l'architecture dans « binary-arch » "
-"de F<debian/rules>, et les paquets indépendants de l'architecture dans « "
-"binary-indep »."
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:265
-msgid ""
-"To facilitate this, as well as give you more control over which packages are "
-"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
-"i>, B<-p>, and B<-s> parameters. These parameters are cumulative. If none "
-"are given, debhelper programs default to acting on all packages listed in "
-"the control file."
-msgstr ""
-"Pour résoudre ce problème, et pour un meilleur contrôle sur la construction "
-"des paquets par debhelper, tous les programmes de debhelper acceptent les "
-"options B<-a>, B<-i>, B<-p>, et B<-s>. Ces options sont cumulatives. Si "
-"aucune n'est précisée, les programmes de debhelper construisent tous les "
-"paquets énumérés dans le fichier de contrôle."
-
-# type: =head2
-#. type: =head2
-#: debhelper.pod:271
-msgid "Automatic generation of Debian install scripts"
-msgstr "Génération automatique des scripts Debian de maintenance du paquet"
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:273
-msgid ""
-"Some debhelper commands will automatically generate parts of Debian "
-"maintainer scripts. If you want these automatically generated things "
-"included in your existing Debian maintainer scripts, then you need to add "
-"B<#DEBHELPER#> to your scripts, in the place the code should be added. "
-"B<#DEBHELPER#> will be replaced by any auto-generated code when you run "
-"B<dh_installdeb>."
-msgstr ""
-"Certaines commandes de debhelper produisent automatiquement des lignes de "
-"code de maintenance du paquet. Pour les inclure dans vos propres scripts de "
-"maintenance du paquet, il convient d'ajouter B<#DEBHELPER#> à l'endroit où "
-"les lignes de code générées devront être insérées. B<#DEBHELPER#> sera "
-"remplacé, par les lignes de code générées automatiquement, lors de "
-"l'exécution de B<dh_installdeb>."
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:280
-msgid ""
-"If a script does not exist at all and debhelper needs to add something to "
-"it, then debhelper will create the complete script."
-msgstr ""
-"Si un script de maintenance n'existe pas et que debhelper doit y inclure "
-"quelque chose, alors debhelper créera le script de maintenance complètement."
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:283
-msgid ""
-"All debhelper commands that automatically generate code in this way let it "
-"be disabled by the -n parameter (see above)."
-msgstr ""
-"Toutes les commandes de debhelper qui produisent automatiquement des lignes "
-"de code de cette façon peuvent inhiber cette production grâce à l'option -n "
-"(voir ci-dessus)."
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:286
-msgid ""
-"Note that the inserted code will be shell code, so you cannot directly use "
-"it in a Perl script. If you would like to embed it into a Perl script, here "
-"is one way to do that (note that I made sure that $1, $2, etc are set with "
-"the set command):"
-msgstr ""
-"Nota : Les lignes de code insérées seront écrites dans le langage de "
-"l'interpréteur de commandes (shell). De ce fait, il est impossible de les "
-"placer directement dans un script Perl. Pour les insérer dans un script "
-"Perl, voici une solution. (S'assurer que $1, $2, etc. sont bien définis par "
-"la commande set.) :"
-
-# type: verbatim
-#. type: verbatim
-#: debhelper.pod:291
-#, no-wrap
-msgid ""
-" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
-" #DEBHELPER#\n"
-" EOF\n"
-" system ($temp) / 256 == 0\n"
-" \tor die \"Problem with debhelper scripts: $!\";\n"
-"\n"
-msgstr ""
-" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
-" #DEBHELPER#\n"
-" EOF\n"
-" system ($temp) / 256 == 0\n"
-" \tor die \"Problème avec le script de debhelper : $!\";\n"
-"\n"
-
-# type: =head2
-#. type: =head2
-#: debhelper.pod:297
-msgid "Automatic generation of miscellaneous dependencies."
-msgstr "Génération automatique des diverses dépendances."
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:299
-msgid ""
-"Some debhelper commands may make the generated package need to depend on "
-"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
-"package will generally need to depend on debconf. Or if you use "
-"L<dh_installxfonts(1)>, your package will generally need to depend on a "
-"particular version of xutils. Keeping track of these miscellaneous "
-"dependencies can be annoying since they are dependant on how debhelper does "
-"things, so debhelper offers a way to automate it."
-msgstr ""
-"Certaines commandes de debhelper peuvent nécessiter des dépendances entre le "
-"paquet construit et d'autres paquets. Par exemple, si L<dh_installdebconf(1)"
-"> est employé, le paquet devra dépendre de debconf. Si L<dh_installxfonts(1)"
-"> est employé, le paquet deviendra dépendant d'une version particulière de "
-"xutils. Maintenir ces dépendances induites peut être pénible puisqu'elles "
-"découlent de la façon dont debhelper travaille. C'est pourquoi debhelper "
-"offre une solution d'automatisation."
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:307
-msgid ""
-"All commands of this type, besides documenting what dependencies may be "
-"needed on their man pages, will automatically generate a substvar called B<"
-"${misc:Depends}>. If you put that token into your F<debian/control> file, it "
-"will be expanded to the dependencies debhelper figures you need."
+msgid "COMPATABILITY LEVELS"
msgstr ""
-"Toutes les commandes de ce type, outre qu'elles documentent, dans leur page "
-"de manuel, les dépendances qu'elle induisent, généreront automatiquement une "
-"variable de substitution nommée B<${misc:depends}>. Si cette variable est "
-"exploitée dans le dossier F<debian/control>, il sera automatiquement enrichi "
-"des dépendances induites par debhelper."
# type: textblock
#. type: textblock
-#: debhelper.pod:312
-msgid ""
-"This is entirely independent of the standard B<${shlibs:Depends}> generated "
-"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by L<dh_perl(1)"
-">. You can choose not to use any of these, if debhelper's guesses don't "
-"match reality."
-msgstr ""
-"Ce processus est entièrement indépendant de B<${shlibs:Depends}> standard, "
-"produite par L<dh_makeshlibs(1)>, et de B<${perl:Depends}> produite par "
-"L<dh_perl(1)>. Il est également possible de choisir de ne pas les utiliser "
-"si les conjectures de debhelper ne correspondent pas à la réalité."
-
-# type: =head2
-#. type: =head2
-#: debhelper.pod:317
-msgid "Package build directories"
-msgstr "Répertoires de construction du paquet"
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:319
-msgid ""
-"By default, all debhelper programs assume that the temporary directory used "
-"for assembling the tree of files in a package is debian/I<package>."
-msgstr ""
-"Par défaut, tous les programmes de debhelper supposent que le répertoire "
-"temporaire utilisé pour construire l'arborescence des fichiers d'un paquet "
-"est debian/I<paquet>."
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:322
-msgid ""
-"Sometimes, you might want to use some other temporary directory. This is "
-"supported by the B<-P> flag. For example, \"B<dh_installdocs -Pdebian/tmp>"
-"\", will use B<debian/tmp> as the temporary directory. Note that if you use "
-"B<-P>, the debhelper programs can only be acting on a single package at a "
-"time. So if you have a package that builds many binary packages, you will "
-"need to also use the B<-p> flag to specify which binary package the "
-"debhelper program will act on."
-msgstr ""
-"Parfois, il peut être souhaitable d'utiliser un autre répertoire temporaire. "
-"Ceci est obtenu grâce au paramètre -P. Par exemple, B<dh_installdocs -"
-"Pdebian/tmp> utilisera B<debian/tmp> comme répertoire temporaire. Nota : "
-"L'usage de B<-P> implique que les programmes de debhelper ne construisent "
-"qu'un seul paquet à la fois. De ce fait, si le paquet source génère "
-"plusieurs paquets binaires, il faudra employer également le paramètre B<-p> "
-"pour préciser l'unique paquet binaire à construire."
-
-# type: =head2
-#. type: =head2
-#: debhelper.pod:330
-msgid "Debhelper compatibility levels"
-msgstr "Niveaux de compatibilité de debhelper"
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:332
+#: debhelper.pod:259
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
# type: textblock
#. type: textblock
-#: debhelper.pod:339
+#: debhelper.pod:266
msgid ""
"Tell debhelper what compatibility level to use by writing a number to "
"F<debian/compat>. For example, to turn on v8 mode:"
# type: verbatim
#. type: verbatim
-#: debhelper.pod:342
+#: debhelper.pod:269
#, no-wrap
msgid ""
" % echo 8 > debian/compat\n"
# type: textblock
#. type: textblock
-#: debhelper.pod:344
+#: debhelper.pod:271
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
# type: textblock
#. type: textblock
-#: debhelper.pod:351
+#: debhelper.pod:278
msgid "These are the available compatibility levels:"
msgstr "Les niveaux de compatibilité sont les suivants :"
#. type: =item
-#: debhelper.pod:355
+#: debhelper.pod:282
msgid "v1"
msgstr "v1"
# type: textblock
#. type: textblock
-#: debhelper.pod:357
+#: debhelper.pod:284
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use F<debian/tmp> as the package tree "
# type: textblock
#. type: textblock
-#: debhelper.pod:362 debhelper.pod:369 debhelper.pod:392 debhelper.pod:421
+#: debhelper.pod:289 debhelper.pod:296 debhelper.pod:319 debhelper.pod:348
msgid "This mode is deprecated."
msgstr "Ce mode est déconseillé."
#. type: =item
-#: debhelper.pod:364
+#: debhelper.pod:291
msgid "v2"
msgstr "v2"
# type: textblock
#. type: textblock
-#: debhelper.pod:366
+#: debhelper.pod:293
msgid ""
"In this mode, debhelper will consistently use debian/I<package> as the "
"package tree directory for every package that is built."
"répertoire de l'arborescence de chaque paquet construit."
#. type: =item
-#: debhelper.pod:371
+#: debhelper.pod:298
msgid "v3"
msgstr "v3"
# type: textblock
#. type: textblock
-#: debhelper.pod:373
+#: debhelper.pod:300
msgid "This mode works like v2, with the following additions:"
msgstr "Ce mode fonctionne comme v2 mais avec les ajouts suivants :"
# type: =item
#. type: =item
-#: debhelper.pod:377 debhelper.pod:382 debhelper.pod:386 debhelper.pod:400
-#: debhelper.pod:405 debhelper.pod:410 debhelper.pod:415 debhelper.pod:429
-#: debhelper.pod:433 debhelper.pod:438 debhelper.pod:442 debhelper.pod:454
-#: debhelper.pod:459 debhelper.pod:465 debhelper.pod:471 debhelper.pod:484
-#: debhelper.pod:491 debhelper.pod:495 debhelper.pod:499 debhelper.pod:514
-#: debhelper.pod:518 debhelper.pod:526 debhelper.pod:531 debhelper.pod:545
+#: debhelper.pod:304 debhelper.pod:309 debhelper.pod:313 debhelper.pod:327
+#: debhelper.pod:332 debhelper.pod:337 debhelper.pod:342 debhelper.pod:356
+#: debhelper.pod:360 debhelper.pod:365 debhelper.pod:369 debhelper.pod:381
+#: debhelper.pod:386 debhelper.pod:392 debhelper.pod:398 debhelper.pod:411
+#: debhelper.pod:418 debhelper.pod:422 debhelper.pod:426 debhelper.pod:441
+#: debhelper.pod:445 debhelper.pod:453 debhelper.pod:458 debhelper.pod:472
+#: debhelper.pod:477 debhelper.pod:483 debhelper.pod:488
msgid "-"
msgstr "-"
# type: textblock
#. type: textblock
-#: debhelper.pod:379
+#: debhelper.pod:306
msgid ""
"Debhelper config files support globbing via B<*> and B<?>, when appropriate. "
"To turn this off and use those characters raw, just prefix with a backslash."
# type: textblock
#. type: textblock
-#: debhelper.pod:384
+#: debhelper.pod:311
msgid ""
"B<dh_makeshlibs> makes the F<postinst> and F<postrm> scripts call "
"B<ldconfig>."
# type: textblock
#. type: textblock
-#: debhelper.pod:388
+#: debhelper.pod:315
msgid ""
"Every file in F<etc/> is automatically flagged as a conffile by "
"B<dh_installdeb>."
"comme un fichier de configuration."
#. type: =item
-#: debhelper.pod:394
+#: debhelper.pod:321
msgid "v4"
msgstr "v4"
# type: textblock
#. type: textblock
-#: debhelper.pod:396
+#: debhelper.pod:323
msgid "Changes from v3 are:"
msgstr "Les changements par rapport à la version 3 sont :"
# type: textblock
#. type: textblock
-#: debhelper.pod:402
+#: debhelper.pod:329
msgid ""
"B<dh_makeshlibs -V> will not include the Debian part of the version number "
"in the generated dependency line in the shlibs file."
# type: textblock
#. type: textblock
-#: debhelper.pod:407
+#: debhelper.pod:334
msgid ""
"You are encouraged to put the new B<${misc:Depends}> into F<debian/control> "
"to supplement the B<${shlibs:Depends}> field."
# type: textblock
#. type: textblock
-#: debhelper.pod:412
+#: debhelper.pod:339
msgid ""
"B<dh_fixperms> will make all files in F<bin/> directories and in F<etc/init."
"d> executable."
# type: textblock
#. type: textblock
-#: debhelper.pod:417
+#: debhelper.pod:344
msgid "B<dh_link> will correct existing links to conform with policy."
msgstr ""
"B<dh_link> corrigera les liens existants pour les rendre conformes à la "
"Charte Debian."
#. type: =item
-#: debhelper.pod:423
+#: debhelper.pod:350
msgid "v5"
msgstr "v5"
# type: textblock
#. type: textblock
-#: debhelper.pod:425
+#: debhelper.pod:352
msgid "Changes from v4 are:"
msgstr "Les changements par rapport à la version 4 sont :"
# type: textblock
#. type: textblock
-#: debhelper.pod:431
+#: debhelper.pod:358
msgid "Comments are ignored in debhelper config files."
msgstr ""
"Les commentaires sont ignorés dans les fichiers de configuration de "
# type: textblock
#. type: textblock
-#: debhelper.pod:435
+#: debhelper.pod:362
msgid ""
"B<dh_strip --dbg-package> now specifies the name of a package to put "
"debugging symbols in, not the packages to take the symbols from."
# type: textblock
#. type: textblock
-#: debhelper.pod:440
+#: debhelper.pod:367
msgid "B<dh_installdocs> skips installing empty files."
msgstr "B<dh_installdocs> saute l'installation des fichiers vides."
# type: textblock
#. type: textblock
-#: debhelper.pod:444
+#: debhelper.pod:371
msgid "B<dh_install> errors out if wildcards expand to nothing."
msgstr ""
"B<dh_install> génère des erreurs si les jokers (wildcards) ne correspondent "
"à rien."
#. type: =item
-#: debhelper.pod:448
+#: debhelper.pod:375
msgid "v6"
msgstr "v6"
# type: textblock
#. type: textblock
-#: debhelper.pod:450
+#: debhelper.pod:377
msgid "Changes from v5 are:"
msgstr "Les changements par rapport à la version 5 sont :"
# type: textblock
#. type: textblock
-#: debhelper.pod:456
+#: debhelper.pod:383
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the F<prerm> and F<postrm> scripts."
# type: textblock
#. type: textblock
-#: debhelper.pod:461
+#: debhelper.pod:388
msgid ""
"B<dh_installwm> will install a slave manpage link for F<x-window-manager.1."
"gz>, if it sees the man page in F<usr/share/man/man1> in the package build "
# type: textblock
#. type: textblock
-#: debhelper.pod:467
+#: debhelper.pod:394
msgid ""
"B<dh_builddeb> did not previously delete everything matching "
"B<DH_ALWAYS_EXCLUDE>, if it was set to a list of things to exclude, such as "
# type: textblock
#. type: textblock
-#: debhelper.pod:473
+#: debhelper.pod:400
msgid ""
"B<dh_installman> allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
"de le faire."
#. type: =item
-#: debhelper.pod:478
+#: debhelper.pod:405
msgid "v7"
msgstr "v7"
# type: textblock
#. type: textblock
-#: debhelper.pod:480
+#: debhelper.pod:407
msgid "Changes from v6 are:"
msgstr "Les changements par rapport à la version 6 sont :"
# type: textblock
#. type: textblock
-#: debhelper.pod:486
+#: debhelper.pod:413
msgid ""
"B<dh_install>, will fall back to looking for files in F<debian/tmp> if it "
"doesn't find them in the current directory (or wherever you tell it look "
# type: textblock
#. type: textblock
-#: debhelper.pod:493
-msgid "B<dh_clean> will read F<debian/clean> and delete files listed there."
+#: debhelper.pod:420
+msgid "B<dh_clean> will read F<debian/clean> and delete files listed there."
+msgstr ""
+"B<dh_clean> lit le répertoire F<debian/clean> et supprime les fichiers qui y "
+"sont mentionnés."
+
+# type: textblock
+#. type: textblock
+#: debhelper.pod:424
+msgid "B<dh_clean> will delete toplevel F<*-stamp> files."
+msgstr "B<dh_clean> supprime les fichiers F<*-stamp>."
+
+# type: textblock
+#. type: textblock
+#: debhelper.pod:428
+msgid ""
+"B<dh_installchangelogs> will guess at what file is the upstream changelog if "
+"none is specified."
+msgstr ""
+"B<dh_installchangelogs> déterminera à quel fichier correspond le changelog "
+"amont si rien n'est spécifié."
+
+#. type: =item
+#: debhelper.pod:433
+msgid "v8"
+msgstr "v8"
+
+# type: textblock
+#. type: textblock
+#: debhelper.pod:435
+msgid "This is the recommended mode of operation."
+msgstr "C'est la version dont l'usage est recommandé."
+
+# type: textblock
+#. type: textblock
+#: debhelper.pod:437
+msgid "Changes from v7 are:"
+msgstr "Les changements par rapport à la version 7 sont :"
+
+#. type: textblock
+#: debhelper.pod:443
+msgid ""
+"Commands will fail rather than warning when they are passed unknown options."
+msgstr ""
+"Les commandes échoueront plutôt que de produire une alerte lorsqu'elles "
+"recevront des options inconnues."
+
+#. type: textblock
+#: debhelper.pod:447
+msgid ""
+"B<dh_makeshlibs> will run B<dpkg-gensymbols> on all shared libraries that it "
+"generates shlibs files for. So B<-X> can be used to exclude libraries. "
+"Also, libraries in unusual locations that B<dpkg-gensymbols> would not have "
+"processed before will be passed to it, a behavior change that can cause some "
+"packages to fail to build."
+msgstr ""
+"B<dh_makeshlibs> va exécuter le programme B<dpkg-gensymbols> sur toutes les "
+"bibliothèques partagées qu'il génère pour les fichiers shlibs. B<-X> peut "
+"alors être utilisé pour exclure certaines bibliothèques. En outre, les "
+"bibliothèques rangées à des emplacements inhabituels que B<pkg-gensymbols> "
+"n'aurait pas traitées avant qu'elles ne lui soient transmises, induisent un "
+"changement de comportement qui peut causer l'échec de la construction de "
+"certains paquets."
+
+#. type: textblock
+#: debhelper.pod:455
+msgid ""
+"B<dh> requires the sequence to run be specified as the first parameter, and "
+"any switches come after it. Ie, use \"B<dh $@ --foo>\", not \"B<dh --foo $@>"
+"\"."
+msgstr ""
+"B<dh> exige que la séquence à exécuter soit spécifiée en tant que premier "
+"paramètre. Tous les commutateurs doivent venir après. C'est à dire qu'il "
+"faut écrire « B<dh $@ --toto> », et non « B<dh --toto $@> »"
+
+#. type: textblock
+#: debhelper.pod:460
+msgid ""
+"B<dh_auto_>I<*> prefer to use Perl's B<Module::Build> in preference to "
+"F<Makefile.PL>."
+msgstr ""
+"B<Dh_auto_*> utilise préférentiellement B<Module::Build> de Perl au lieu de "
+"F<Makefile.PL>."
+
+#. type: =item
+#: debhelper.pod:464
+msgid "v9"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:466
+msgid ""
+"This compatibility level is still open for development; use with caution."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: debhelper.pod:468
+#, fuzzy
+#| msgid "Changes from v3 are:"
+msgid "Changes from v8 are:"
+msgstr "Les changements par rapport à la version 3 sont :"
+
+#. type: textblock
+#: debhelper.pod:474
+msgid ""
+"Multiarch support. In particular, B<dh_auto_configure> passes multiarch "
+"directories to autoconf in --libdir and --libexecdir."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:479
+msgid ""
+"dh allows defining custom build, build-arch, and build-indep targets in "
+"debian/rules, without needing to manually define the other targets that "
+"depend on them."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:485
+msgid ""
+"B<dh_auto_configure> does not include the source package name in --"
+"libexecdir when using autoconf."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:490
+msgid "B<dh> does not default to enabling --with=python-support"
+msgstr ""
+
+# type: =head1
+#. type: =head1
+#: debhelper.pod:496 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116
+#: dh_installemacsen:67 dh_installexamples:53 dh_installinit:133
+#: dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55
+#: dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68
+#: dh_usrlocal:49
+msgid "NOTES"
+msgstr "REMARQUES"
+
+# type: =head2
+#. type: =head2
+#: debhelper.pod:498
+msgid "Multiple binary package support"
+msgstr "Prise en charge de plusieurs paquets binaires"
+
+# type: textblock
+#. type: textblock
+#: debhelper.pod:500
+msgid ""
+"If your source package generates more than one binary package, debhelper "
+"programs will default to acting on all binary packages when run. If your "
+"source package happens to generate one architecture dependent package, and "
+"another architecture independent package, this is not the correct behavior, "
+"because you need to generate the architecture dependent packages in the "
+"binary-arch F<debian/rules> target, and the architecture independent "
+"packages in the binary-indep F<debian/rules> target."
+msgstr ""
+"Si le paquet source produit plus d'un paquet binaire, les programmes de "
+"debhelper construiront tous les paquets binaires. Si le paquet source doit "
+"construire un paquet dépendant de l'architecture, et un paquet indépendant "
+"de l'architecture, ce comportement ne conviendra pas. En effet, il convient "
+"de construire les paquets dépendants de l'architecture dans « binary-arch » "
+"de F<debian/rules>, et les paquets indépendants de l'architecture dans « "
+"binary-indep »."
+
+# type: textblock
+#. type: textblock
+#: debhelper.pod:508
+msgid ""
+"To facilitate this, as well as give you more control over which packages are "
+"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
+"i>, B<-p>, and B<-s> parameters. These parameters are cumulative. If none "
+"are given, debhelper programs default to acting on all packages listed in "
+"the control file."
+msgstr ""
+"Pour résoudre ce problème, et pour un meilleur contrôle sur la construction "
+"des paquets par debhelper, tous les programmes de debhelper acceptent les "
+"options B<-a>, B<-i>, B<-p>, et B<-s>. Ces options sont cumulatives. Si "
+"aucune n'est précisée, les programmes de debhelper construisent tous les "
+"paquets énumérés dans le fichier de contrôle."
+
+# type: =head2
+#. type: =head2
+#: debhelper.pod:514
+msgid "Automatic generation of Debian install scripts"
+msgstr "Génération automatique des scripts Debian de maintenance du paquet"
+
+# type: textblock
+#. type: textblock
+#: debhelper.pod:516
+msgid ""
+"Some debhelper commands will automatically generate parts of Debian "
+"maintainer scripts. If you want these automatically generated things "
+"included in your existing Debian maintainer scripts, then you need to add "
+"B<#DEBHELPER#> to your scripts, in the place the code should be added. "
+"B<#DEBHELPER#> will be replaced by any auto-generated code when you run "
+"B<dh_installdeb>."
msgstr ""
-"B<dh_clean> lit le répertoire F<debian/clean> et supprime les fichiers qui y "
-"sont mentionnés."
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:497
-msgid "B<dh_clean> will delete toplevel F<*-stamp> files."
-msgstr "B<dh_clean> supprime les fichiers F<*-stamp>."
+"Certaines commandes de debhelper produisent automatiquement des lignes de "
+"code de maintenance du paquet. Pour les inclure dans vos propres scripts de "
+"maintenance du paquet, il convient d'ajouter B<#DEBHELPER#> à l'endroit où "
+"les lignes de code générées devront être insérées. B<#DEBHELPER#> sera "
+"remplacé, par les lignes de code générées automatiquement, lors de "
+"l'exécution de B<dh_installdeb>."
# type: textblock
#. type: textblock
-#: debhelper.pod:501
+#: debhelper.pod:523
msgid ""
-"B<dh_installchangelogs> will guess at what file is the upstream changelog if "
-"none is specified."
+"If a script does not exist at all and debhelper needs to add something to "
+"it, then debhelper will create the complete script."
msgstr ""
-"B<dh_installchangelogs> déterminera à quel fichier correspond le changelog "
-"amont si rien n'est spécifié."
-
-#. type: =item
-#: debhelper.pod:506
-msgid "v8"
-msgstr "v8"
+"Si un script de maintenance n'existe pas et que debhelper doit y inclure "
+"quelque chose, alors debhelper créera le script de maintenance complètement."
# type: textblock
#. type: textblock
-#: debhelper.pod:508
-msgid "This is the recommended mode of operation."
-msgstr "C'est la version dont l'usage est recommandé."
+#: debhelper.pod:526
+msgid ""
+"All debhelper commands that automatically generate code in this way let it "
+"be disabled by the -n parameter (see above)."
+msgstr ""
+"Toutes les commandes de debhelper qui produisent automatiquement des lignes "
+"de code de cette façon peuvent inhiber cette production grâce à l'option -n "
+"(voir ci-dessus)."
# type: textblock
#. type: textblock
-#: debhelper.pod:510
-msgid "Changes from v7 are:"
-msgstr "Les changements par rapport à la version 7 sont :"
+#: debhelper.pod:529
+msgid ""
+"Note that the inserted code will be shell code, so you cannot directly use "
+"it in a Perl script. If you would like to embed it into a Perl script, here "
+"is one way to do that (note that I made sure that $1, $2, etc are set with "
+"the set command):"
+msgstr ""
+"Nota : Les lignes de code insérées seront écrites dans le langage de "
+"l'interpréteur de commandes (shell). De ce fait, il est impossible de les "
+"placer directement dans un script Perl. Pour les insérer dans un script "
+"Perl, voici une solution. (S'assurer que $1, $2, etc. sont bien définis par "
+"la commande set.) :"
-#. type: textblock
-#: debhelper.pod:516
+# type: verbatim
+#. type: verbatim
+#: debhelper.pod:534
+#, no-wrap
msgid ""
-"Commands will fail rather than warning when they are passed unknown options."
+" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
+" #DEBHELPER#\n"
+" EOF\n"
+" system ($temp) / 256 == 0\n"
+" \tor die \"Problem with debhelper scripts: $!\";\n"
+"\n"
msgstr ""
-"Les commandes échoueront plutôt que de produire une alerte lorsqu'elles "
-"recevront des options inconnues."
+" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
+" #DEBHELPER#\n"
+" EOF\n"
+" system ($temp) / 256 == 0\n"
+" \tor die \"Problème avec le script de debhelper : $!\";\n"
+"\n"
+# type: =head2
+#. type: =head2
+#: debhelper.pod:540
+msgid "Automatic generation of miscellaneous dependencies."
+msgstr "Génération automatique des diverses dépendances."
+
+# type: textblock
#. type: textblock
-#: debhelper.pod:520
+#: debhelper.pod:542
+#, fuzzy
+#| msgid ""
+#| "Some debhelper commands may make the generated package need to depend on "
+#| "some other packages. For example, if you use L<dh_installdebconf(1)>, "
+#| "your package will generally need to depend on debconf. Or if you use "
+#| "L<dh_installxfonts(1)>, your package will generally need to depend on a "
+#| "particular version of xutils. Keeping track of these miscellaneous "
+#| "dependencies can be annoying since they are dependant on how debhelper "
+#| "does things, so debhelper offers a way to automate it."
msgid ""
-"B<dh_makeshlibs> will run B<dpkg-gensymbols> on all shared libraries that it "
-"generates shlibs files for. So B<-X> can be used to exclude libraries. "
-"Also, libraries in unusual locations that B<dpkg-gensymbols> would not have "
-"processed before will be passed to it, a behavior change that can cause some "
-"packages to fail to build."
+"Some debhelper commands may make the generated package need to depend on "
+"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
+"package will generally need to depend on debconf. Or if you use "
+"L<dh_installxfonts(1)>, your package will generally need to depend on a "
+"particular version of xutils. Keeping track of these miscellaneous "
+"dependencies can be annoying since they are dependent on how debhelper does "
+"things, so debhelper offers a way to automate it."
msgstr ""
-"B<dh_makeshlibs> va exécuter le programme B<dpkg-gensymbols> sur toutes les "
-"bibliothèques partagées qu'il génère pour les fichiers shlibs. B<-X> peut "
-"alors être utilisé pour exclure certaines bibliothèques. En outre, les "
-"bibliothèques rangées à des emplacements inhabituels que B<pkg-gensymbols> "
-"n'aurait pas traitées avant qu'elles ne lui soient transmises, induisent un "
-"changement de comportement qui peut causer l'échec de la construction de "
-"certains paquets."
+"Certaines commandes de debhelper peuvent nécessiter des dépendances entre le "
+"paquet construit et d'autres paquets. Par exemple, si L<dh_installdebconf(1)"
+"> est employé, le paquet devra dépendre de debconf. Si L<dh_installxfonts(1)"
+"> est employé, le paquet deviendra dépendant d'une version particulière de "
+"xutils. Maintenir ces dépendances induites peut être pénible puisqu'elles "
+"découlent de la façon dont debhelper travaille. C'est pourquoi debhelper "
+"offre une solution d'automatisation."
+# type: textblock
#. type: textblock
-#: debhelper.pod:528
+#: debhelper.pod:550
msgid ""
-"B<dh> requires the sequence to run be specified as the first parameter, and "
-"any switches come after it. Ie, use \"B<dh $@ --foo>\", not \"B<dh --foo $@>"
-"\"."
+"All commands of this type, besides documenting what dependencies may be "
+"needed on their man pages, will automatically generate a substvar called B<"
+"${misc:Depends}>. If you put that token into your F<debian/control> file, it "
+"will be expanded to the dependencies debhelper figures you need."
msgstr ""
-"B<dh> exige que la séquence à exécuter soit spécifiée en tant que premier "
-"paramètre. Tous les commutateurs doivent venir après. C'est à dire qu'il "
-"faut écrire « B<dh $@ --toto> », et non « B<dh --toto $@> »"
+"Toutes les commandes de ce type, outre qu'elles documentent, dans leur page "
+"de manuel, les dépendances qu'elle induisent, généreront automatiquement une "
+"variable de substitution nommée B<${misc:depends}>. Si cette variable est "
+"exploitée dans le dossier F<debian/control>, il sera automatiquement enrichi "
+"des dépendances induites par debhelper."
+# type: textblock
#. type: textblock
-#: debhelper.pod:533
+#: debhelper.pod:555
msgid ""
-"B<dh_auto_>I<*> prefer to use Perl's B<Module::Build> in preference to "
-"F<Makefile.PL>."
+"This is entirely independent of the standard B<${shlibs:Depends}> generated "
+"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by L<dh_perl(1)"
+">. You can choose not to use any of these, if debhelper's guesses don't "
+"match reality."
msgstr ""
-"B<Dh_auto_*> utilise préférentiellement B<Module::Build> de Perl au lieu de "
-"F<Makefile.PL>."
+"Ce processus est entièrement indépendant de B<${shlibs:Depends}> standard, "
+"produite par L<dh_makeshlibs(1)>, et de B<${perl:Depends}> produite par "
+"L<dh_perl(1)>. Il est également possible de choisir de ne pas les utiliser "
+"si les conjectures de debhelper ne correspondent pas à la réalité."
-#. type: =item
-#: debhelper.pod:537
-msgid "v9"
-msgstr ""
+# type: =head2
+#. type: =head2
+#: debhelper.pod:560
+msgid "Package build directories"
+msgstr "Répertoires de construction du paquet"
+# type: textblock
#. type: textblock
-#: debhelper.pod:539
+#: debhelper.pod:562
msgid ""
-"This compatability level is still open for development; use with caution."
+"By default, all debhelper programs assume that the temporary directory used "
+"for assembling the tree of files in a package is debian/I<package>."
msgstr ""
+"Par défaut, tous les programmes de debhelper supposent que le répertoire "
+"temporaire utilisé pour construire l'arborescence des fichiers d'un paquet "
+"est debian/I<paquet>."
# type: textblock
#. type: textblock
-#: debhelper.pod:541
-#, fuzzy
-#| msgid "Changes from v3 are:"
-msgid "Changes from v8 are:"
-msgstr "Les changements par rapport à la version 3 sont :"
-
-#. type: textblock
-#: debhelper.pod:547
+#: debhelper.pod:565
msgid ""
-"Multiarch support. In particular, B<dh_auto_configure> passes multiarch "
-"directories to autoconf in --libdir and --libexecdir, while B<dh_makeshlibs> "
-"detects packages containing multiarch directories and sets a Pre-Dependency "
-"on multiarch-support in ${misc:Pre-Depends}"
+"Sometimes, you might want to use some other temporary directory. This is "
+"supported by the B<-P> flag. For example, \"B<dh_installdocs -Pdebian/tmp>"
+"\", will use B<debian/tmp> as the temporary directory. Note that if you use "
+"B<-P>, the debhelper programs can only be acting on a single package at a "
+"time. So if you have a package that builds many binary packages, you will "
+"need to also use the B<-p> flag to specify which binary package the "
+"debhelper program will act on."
msgstr ""
+"Parfois, il peut être souhaitable d'utiliser un autre répertoire temporaire. "
+"Ceci est obtenu grâce au paramètre -P. Par exemple, B<dh_installdocs -"
+"Pdebian/tmp> utilisera B<debian/tmp> comme répertoire temporaire. Nota : "
+"L'usage de B<-P> implique que les programmes de debhelper ne construisent "
+"qu'un seul paquet à la fois. De ce fait, si le paquet source génère "
+"plusieurs paquets binaires, il faudra employer également le paramètre B<-p> "
+"pour préciser l'unique paquet binaire à construire."
# type: =head2
#. type: =head2
-#: debhelper.pod:557
+#: debhelper.pod:573
msgid "udebs"
msgstr "udebs"
# type: textblock
#. type: textblock
-#: debhelper.pod:559
+#: debhelper.pod:575
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>, and "
"un udeb, en omettant les scripts F<preinst>, F<postrm>, F<prerm> et "
"F<config>, etc."
-# type: =head2
#. type: =head2
-#: debhelper.pod:566
-msgid "Other notes"
-msgstr "Autres remarques"
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:568
-msgid ""
-"In general, if any debhelper program needs a directory to exist under "
-"B<debian/>, it will create it. I haven't bothered to document this in all "
-"the man pages, but for example, B<dh_installdeb> knows to make debian/"
-"I<package>/DEBIAN/ before trying to put files there, B<dh_installmenu> knows "
-"you need a debian/I<package>/usr/share/menu/ before installing the menu "
-"files, etc."
+#: debhelper.pod:582
+msgid "Build depends"
msgstr ""
-"Généralement, si un programme de debhelper a besoin qu'un répertoire existe "
-"dans B<debian/>, il le créera. Ce comportement n'est pas documenté dans "
-"toutes les pages de manuel, mais, par exemple, le B<dh_installdeb> sait "
-"qu'il doit créer le répertoire debian/I<paquet>/DEBIAN/ avant de tenter de "
-"mettre des fichiers dedans. De même, B<dh_installmenu> sait qu'il est "
-"nécessaire d'avoir un répertoire debian/I<paquet>/usr/share/menu/ avant "
-"d'installer les fichiers menu, etc."
# type: textblock
#. type: textblock
-#: debhelper.pod:574
+#: debhelper.pod:584
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in F<debian/control>. You should build-depend on a "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:580
+#: debhelper.pod:590
#, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
# type: =head1
#. type: =head1
-#: debhelper.pod:582
+#: debhelper.pod:592
msgid "ENVIRONMENT"
msgstr "VARIABLES D'ENVIRONNEMENT"
# type: =item
#. type: =item
-#: debhelper.pod:586
+#: debhelper.pod:596
msgid "B<DH_VERBOSE>"
msgstr "B<DH_VERBOSE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:588
+#: debhelper.pod:598
msgid ""
"Set to B<1> to enable verbose mode. Debhelper will output every command it "
"runs that modifies files on the build system."
# type: =item
#. type: =item
-#: debhelper.pod:591
+#: debhelper.pod:601
msgid "B<DH_COMPAT>"
msgstr "B<DH_COMPAT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:593
+#: debhelper.pod:603
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in F<debian/compat>."
# type: =item
#. type: =item
-#: debhelper.pod:596
+#: debhelper.pod:606
msgid "B<DH_NO_ACT>"
msgstr "B<DH_NO_ACT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:598
+#: debhelper.pod:608
msgid "Set to B<1> to enable no-act mode."
msgstr "Mettre cette variable à B<1> pour activer le mode simulation (no-act)."
# type: =item
#. type: =item
-#: debhelper.pod:600
+#: debhelper.pod:610
msgid "B<DH_OPTIONS>"
msgstr "B<DH_OPTIONS>"
# type: textblock
#. type: textblock
-#: debhelper.pod:602
+#: debhelper.pod:612
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
# type: textblock
#. type: textblock
-#: debhelper.pod:606
+#: debhelper.pod:616
msgid ""
"This is useful in some situations, for example, if you need to pass B<-p> to "
"all debhelper commands that will be run. One good way to set B<DH_OPTIONS> "
# type: =item
#. type: =item
-#: debhelper.pod:611
+#: debhelper.pod:621
msgid "B<DH_ALWAYS_EXCLUDE>"
msgstr "B<DH_ALWAYS_EXCLUDE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:613
+#: debhelper.pod:623
msgid ""
"If set, this adds the value the variable is set to to the B<-X> options of "
"all commands that support the B<-X> option. Moreover, B<dh_builddeb> will "
# type: textblock
#. type: textblock
-#: debhelper.pod:617
+#: debhelper.pod:627
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories from "
# type: textblock
#. type: textblock
-#: debhelper.pod:624
+#: debhelper.pod:634
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"B<DH_ALWAYS_EXCLUDE=CVS:.svn>"
# type: =head1
#. type: =head1
-#: debhelper.pod:629 dh:765 dh_auto_build:47 dh_auto_clean:50
+#: debhelper.pod:639 dh:856 dh_auto_build:47 dh_auto_clean:50
#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122
-#: dh_builddeb:91 dh_clean:138 dh_compress:204 dh_desktop:31 dh_fixperms:129
-#: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:280
+#: dh_builddeb:123 dh_clean:142 dh_compress:204 dh_desktop:31 dh_fixperms:129
+#: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279
#: dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77
#: dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86
#: dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106
# type: =item
#. type: =item
-#: debhelper.pod:633
+#: debhelper.pod:643
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr "F</usr/share/doc/debhelper/examples/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:635
+#: debhelper.pod:645
msgid "A set of example F<debian/rules> files that use debhelper."
msgstr ""
"Un ensemble d'exemples de fichiers F<debian/rules> qui utilisent debhelper."
# type: =item
#. type: =item
-#: debhelper.pod:637
+#: debhelper.pod:647
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr "L<http://kitenet.net/~joey/code/debhelper/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:639
+#: debhelper.pod:649
msgid "Debhelper web site."
msgstr "Le site internet de debhelper."
# type: =head1
#. type: =head1
-#: debhelper.pod:643 dh:771 dh_auto_build:53 dh_auto_clean:56
+#: debhelper.pod:653 dh:862 dh_auto_build:53 dh_auto_clean:56
#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130
-#: dh_builddeb:97 dh_clean:144 dh_compress:210 dh_desktop:37 dh_fixperms:135
-#: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:286
+#: dh_builddeb:129 dh_clean:148 dh_compress:210 dh_desktop:37 dh_fixperms:135
+#: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285
#: dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83
#: dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92
#: dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112
# type: textblock
#. type: textblock
-#: debhelper.pod:645 dh:773 dh_auto_build:55 dh_auto_clean:58
-#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:99
-#: dh_clean:146 dh_compress:212 dh_fixperms:137 dh_gencontrol:90
-#: dh_install:288 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152
+#: debhelper.pod:655 dh:864 dh_auto_build:55 dh_auto_clean:58
+#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:131
+#: dh_clean:150 dh_compress:212 dh_fixperms:137 dh_gencontrol:90
+#: dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152
#: dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315
#: dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77
#: dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58
"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
"\n"
-# type: textblock
#. type: textblock
#: dh:165
msgid ""
-"If your package is a Python package, B<dh> will use B<dh_pysupport> by "
-"default. This is how to use B<dh_pycentral> instead."
+"Python tools are not run by dh by default, due to the continual change in "
+"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"Here is how to use B<dh_python2>."
msgstr ""
-"Si le paquet est un paquet Python, B<dh> utilisera B<dh_pysupport> par "
-"défaut. Voici comment utiliser B<dh_pycentral> à la place :"
# type: verbatim
#. type: verbatim
-#: dh:168
-#, no-wrap
+#: dh:169
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\t#!/usr/bin/make -f\n"
+#| "\t%:\n"
+#| "\t\tdh $@ --with python-central\n"
+#| "\n"
msgid ""
"\t#!/usr/bin/make -f\n"
"\t%:\n"
-"\t\tdh $@ --with python-central\n"
+"\t\tdh $@ --with python2\n"
"\n"
msgstr ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:172
+#: dh:173
msgid ""
"If your package uses autotools and you want to freshen F<config.sub> and "
"F<config.guess> with newer versions from the B<autotools-dev> package at "
# type: verbatim
#. type: verbatim
-#: dh:177
+#: dh:178
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
# type: textblock
#. type: textblock
-#: dh:181
+#: dh:182
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
# type: verbatim
#. type: verbatim
-#: dh:185
+#: dh:186
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
# type: verbatim
#. type: verbatim
-#: dh:189
+#: dh:190
#, no-wrap
msgid ""
"To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
# type: verbatim
#. type: verbatim
-#: dh:192
+#: dh:193
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
# type: textblock
#. type: textblock
-#: dh:196
+#: dh:197
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
# type: verbatim
#. type: verbatim
-#: dh:200
+#: dh:201
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:204
+#: dh:205
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
# type: verbatim
#. type: verbatim
-#: dh:207
+#: dh:208
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:211
+#: dh:212
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
# type: verbatim
#. type: verbatim
-#: dh:214
+#: dh:215
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:218
+#: dh:219
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
# type: verbatim
#. type: verbatim
-#: dh:221 dh:232 dh:249
+#: dh:222 dh:233 dh:250
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t\n"
#. type: verbatim
-#: dh:225
+#: dh:226
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
"\n"
#. type: textblock
-#: dh:228
+#: dh:229
msgid ""
"Sometimes, you may need to make an override target only run commands when a "
"particular package is being built. This can be accomplished using "
# type: verbatim
#. type: verbatim
-#: dh:236
+#: dh:237
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
"\n"
#. type: textblock
-#: dh:242
+#: dh:243
+#, fuzzy
+#| msgid ""
+#| "Finally, remember that you are not limited to using override targets in "
+#| "the rules file when using B<dh>. You can also explicitly define any of "
+#| "the regular rules file targets when it makes sense to do so. A common "
+#| "reason to do this is if your package needs different B<build-arch> and "
+#| "B<build-indep> targets. For example, a package with a long document build "
+#| "process can put it in B<build-indep> to avoid build daemons redundantly "
+#| "building the documentation."
msgid ""
"Finally, remember that you are not limited to using override targets in the "
"rules file when using B<dh>. You can also explicitly define any of the "
"regular rules file targets when it makes sense to do so. A common reason to "
-"do this is if your package needs different B<build-arch> and B<build-indep> "
-"targets. For example, a package with a long document build process can put "
-"it in B<build-indep> to avoid build daemons redundantly building the "
-"documentation."
+"do this is when your package needs different B<build-arch> and B<build-"
+"indep> targets. For example, a package with a long document build process "
+"can put it in B<build-indep>."
msgstr ""
"Enfin, n'oubliez pas que vous n'êtes pas limité à la seule substitution de "
"blocs dans le fichier rules lors de l'utilisation de B<dh>. Vous pouvez "
"cette génération soit refaite pour chacune des architectures."
#. type: verbatim
-#: dh:253
-#, no-wrap
+#: dh:254
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\tbuild: build-arch build-indep ;\n"
+#| "\tbuild-indep:\n"
+#| "\t\t$(MAKE) docs\n"
+#| "\tbuild-arch:\n"
+#| "\t\t$(MAKE) bins\n"
+#| "\n"
msgid ""
-"\tbuild: build-arch build-indep ;\n"
"\tbuild-indep:\n"
"\t\t$(MAKE) docs\n"
"\tbuild-arch:\n"
"\t\t$(MAKE) bins\n"
"\n"
-#. type: =head1
+#. type: textblock
#: dh:259
+msgid ""
+"Note that in the example above, dh will arrange for \"debian/rules build\" "
+"to call your build-indep and build-arch targets. You do not need to "
+"explicitly define those dependencies in the rules file when using dh with "
+"compatibility level v9. This example would be more complicated with earlier "
+"compatibility levels."
+msgstr ""
+
+#. type: =head1
+#: dh:265
msgid "INTERNALS"
msgstr "FONCTIONNEMENT INTERNE"
#. type: textblock
-#: dh:261
+#: dh:267
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
# type: textblock
#. type: textblock
-#: dh:263
+#: dh:269
msgid ""
"Each debhelper command will record when it's successfully run in F<debian/"
"package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can tell which "
# type: textblock
#. type: textblock
-#: dh:268
+#: dh:274
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
"B<--after> et B<--remaining> permettent de modifier ce comportement."
#. type: textblock
-#: dh:273
+#: dh:279
+msgid ""
+"A sequence can also run dependent targets in debian/rules. For example, the "
+"\"binary\" sequence runs the \"install\" target."
+msgstr ""
+
+#. type: textblock
+#: dh:282
+msgid ""
+"B<dh> sets environment variables listed by B<dpkg-buildflags>, unless they "
+"are already set. It supports DEB_BUILD_OPTIONS=noopt too."
+msgstr ""
+
+#. type: textblock
+#: dh:285
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
# type: textblock
#. type: textblock
-#: dh:767 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
-#: dh_auto_install:87 dh_auto_test:60 dh_builddeb:93 dh_clean:140
+#: dh:858 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
+#: dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144
#: dh_compress:206 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84
-#: dh_install:282 dh_installcatalogs:118 dh_installchangelogs:173
+#: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173
#: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88
#: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108
#: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277
# type: textblock
#. type: textblock
-#: dh:769 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
-#: dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:95
-#: dh_clean:142 dh_compress:208 dh_desktop:35 dh_fixperms:133 dh_gconf:103
-#: dh_gencontrol:86 dh_icons:69 dh_install:284 dh_installchangelogs:175
+#: dh:860 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
+#: dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127
+#: dh_clean:146 dh_compress:208 dh_desktop:35 dh_fixperms:133 dh_gconf:103
+#: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175
#: dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90
#: dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110
#: dh_installifupdown:73 dh_installinfo:81 dh_installinit:279
#. type: textblock
#: dh_install:85
+#, fuzzy
+#| msgid ""
+#| "Note that this is not the same as the B<--sourcedirectory> option used by "
+#| "the B<dh_auto_>I<*> commands. You rarely need to use this option, since "
+#| "B<dh_install> automatically looks for files in F<debian/tmp> in debhelper"
msgid ""
"Note that this is not the same as the B<--sourcedirectory> option used by "
"the B<dh_auto_>I<*> commands. You rarely need to use this option, since "
-"B<dh_install> automatically looks for files in F<debian/tmp> in debhelper"
+"B<dh_install> automatically looks for files in F<debian/tmp> in debhelper "
+"compatibility level 7 and above."
msgstr ""
"Nota : Cette option ne fait pas la même chose que B<--sourcedirectory> "
"utilisée par B<dh_auto_>I<*>. Il est rare d'avoir besoin d'utiliser cette "
"option puisque B<dh_install> cherche automatiquement les fichiers dans "
"F<debian/tmp> depuis la version 7 de debhelper."
-# type: =head2
-#. type: textblock
-#: dh_install:89
-msgid "compatibility level 7 and above."
-msgstr "Compatibilité avec le niveau 7 et suivants."
-
# type: =item
#. type: =item
-#: dh_install:91
+#: dh_install:90
msgid "B<--autodest>"
msgstr "B<--autodest>"
# type: textblock
#. type: textblock
-#: dh_install:93
+#: dh_install:92
msgid ""
"Guess as the destination directory to install things to. If this is "
"specified, you should not list destination directories in F<debian/package."
# type: textblock
#. type: textblock
-#: dh_install:98
+#: dh_install:97
msgid ""
"Strip off F<debian/tmp> (or the sourcedir if one is given) from the front of "
"the filename, if it is present, and install into the dirname of the "
# type: textblock
#. type: textblock
-#: dh_install:104
+#: dh_install:103
msgid ""
"Note that if you list exactly one filename or wildcard-pattern on a line by "
"itself in a F<debian/package.install> file, with no explicit destination, "
# type: =item
#. type: =item
-#: dh_install:109
+#: dh_install:108
msgid "I<file> ... I<dest>"
msgstr "I<fichier> ... I<destination>"
# type: textblock
#. type: textblock
-#: dh_install:111
+#: dh_install:110
msgid ""
"Lists files (or directories) to install and where to install them to. The "
"files will be installed into the first package F<dh_install> acts on."
# type: =head1
#. type: =head1
-#: dh_install:253
+#: dh_install:252
msgid "EXAMPLE"
msgstr "EXEMPLE"
# type: textblock
#. type: textblock
-#: dh_install:255
+#: dh_install:254
msgid ""
"Suppose your package's upstream F<Makefile> installs a binary, a man page, "
"and a library into appropriate subdirectories of F<debian/tmp>. You want to "
# type: verbatim
#. type: verbatim
-#: dh_install:261
+#: dh_install:260
#, no-wrap
msgid ""
" usr/bin\n"
# type: textblock
#. type: textblock
-#: dh_install:264
+#: dh_install:263
msgid "While F<debian/libfoo.install> contains:"
msgstr "Tandis que F<debian/libtoto.install> devra contenir :"
# type: verbatim
#. type: verbatim
-#: dh_install:266
+#: dh_install:265
#, no-wrap
msgid ""
" usr/lib/libfoo*.so.*\n"
# type: textblock
#. type: textblock
-#: dh_install:268
+#: dh_install:267
msgid ""
"If you want a libfoo-dev package too, F<debian/libfoo-dev.install> might "
"contain:"
# type: verbatim
#. type: verbatim
-#: dh_install:270
+#: dh_install:269
#, no-wrap
msgid ""
" usr/include\n"
# type: =head1
#. type: =head1
-#: dh_install:274
+#: dh_install:273
msgid "LIMITATIONS"
msgstr "LIMITES"
# type: verbatim
#. type: verbatim
-#: dh_install:276
+#: dh_install:275
#, no-wrap
msgid ""
"B<dh_install> cannot rename files or directories, it can only install them\n"
# type: textblock
#. type: textblock
-#: dh_installemacsen:54 dh_usrlocal:45
+#: dh_installemacsen:54 dh_python:62 dh_usrlocal:45
msgid "Do not modify F<postinst>/F<prerm> scripts."
msgstr ""
"Empêche la modification des scripts de maintenance du paquet F<postinst> et "
# type: textblock
#. type: textblock
-#: dh_installmenu:47 dh_installmime:47 dh_installmodules:50 dh_installudev:51
-#: dh_makeshlibs:79 dh_python:62
+#: dh_installmenu:47 dh_installmime:47 dh_makeshlibs:79
msgid "Do not modify F<postinst>/F<postrm> scripts."
msgstr ""
"Empêche la modification des scripts de maintenance du paquet F<postinst> et "
# type: textblock
#. type: textblock
#: dh_installmodules:23
+#, fuzzy
+#| msgid ""
+#| "Kernel modules are searched for in the package build directory and if "
+#| "found, F<postinst> and F<postrm> commands are automatically generated to "
+#| "run B<depmod> and register the modules when the package is installed. "
+#| "These commands are inserted into the maintainer scripts by L<dh_installdeb"
+#| "(1)>."
msgid ""
"Kernel modules are searched for in the package build directory and if found, "
-"F<postinst> and F<postrm> commands are automatically generated to run "
-"B<depmod> and register the modules when the package is installed. These "
-"commands are inserted into the maintainer scripts by L<dh_installdeb(1)>."
+"F<preinst>, F<postinst> and F<postrm> commands are automatically generated "
+"to run B<depmod> and register the modules when the package is installed. "
+"These commands are inserted into the maintainer scripts by L<dh_installdeb(1)"
+">."
msgstr ""
"Des modules de noyau sont recherchés dans le répertoire de construction du "
"paquet et, s'il s'en trouve, les lignes de code des scripts de maintenance "
"maintenant plus utilisés. B<dh_installmodules> produira un avertissement si "
"ces fichiers existent."
+# type: textblock
+#. type: textblock
+#: dh_installmodules:50
+#, fuzzy
+#| msgid "Do not modify F<postinst>/F<postrm> scripts."
+msgid "Do not modify F<preinst>/F<postinst>/F<postrm> scripts."
+msgstr ""
+"Empêche la modification des scripts de maintenance du paquet F<postinst> et "
+"F<postrm>."
+
# type: textblock
#. type: textblock
#: dh_installmodules:54
"Fixe la priorité du lien symbolique des F<rules.d>. La valeur par défaut est "
"60."
+# type: textblock
+#. type: textblock
+#: dh_installudev:51
+#, fuzzy
+#| msgid "Do not modify F<postinst>/F<postrm> scripts."
+msgid "Do not modify F<preinst>/F<postinst> scripts."
+msgstr ""
+"Empêche la modification des scripts de maintenance du paquet F<postinst> et "
+"F<postrm>."
+
# type: textblock
#. type: textblock
#: dh_installwm:5
# type: textblock
#. type: textblock
#: dh_installwm:18
+#, fuzzy
+#| msgid ""
+#| "B<dh_installwm> is a debhelper program that is responsible for generating "
+#| "the F<postinst> and F<postrm> commands that register a window manager "
+#| "with L<update-alternatives(8)>. The window manager's man page is also "
+#| "registered as a slave symlink (in v6 mode and up), if it is found in "
+#| "F<usr/share/man/man1/> in the package build directory."
msgid ""
"B<dh_installwm> is a debhelper program that is responsible for generating "
-"the F<postinst> and F<postrm> commands that register a window manager with "
+"the F<postinst> and F<prerm> commands that register a window manager with "
"L<update-alternatives(8)>. The window manager's man page is also registered "
"as a slave symlink (in v6 mode and up), if it is found in F<usr/share/man/"
"man1/> in the package build directory."
# type: textblock
#. type: textblock
#: dh_installwm:46
+#, fuzzy
+#| msgid ""
+#| "Do not modify F<postinst>/F<postrm> scripts. Turns this command into a no-"
+#| "op."
msgid ""
-"Do not modify F<postinst>/F<postrm> scripts. Turns this command into a no-op."
+"Do not modify F<postinst>/F<prerm> scripts. Turns this command into a no-op."
msgstr ""
"Empêche la modification des scripts de maintenance F<postinst> et F<postrm>. "
"Utiliser ce paramètre revient à ne rien faire."
#| "you should make sure to put that token into an appropriate place in your "
#| "debian/control file."
msgid ""
-"In v9 mode and above, packages that support multiarch are detected, and a "
-"Pre-Dependency on multiarch-support is set in ${misc:Pre-Depends} ; you "
-"should make sure to put that token into an appropriate place in your debian/"
-"control file for packages supporting multiarch."
+"Packages that support multiarch are detected, and a Pre-Dependency on "
+"multiarch-support is set in ${misc:Pre-Depends} ; you should make sure to "
+"put that token into an appropriate place in your debian/control file for "
+"packages supporting multiarch."
msgstr ""
"Une B<Pre-Dependency> adaptée à la version de B<dpkg> est nécessaire pour "
"utiliser L<dpkg-maintscript-helper(1)>. Une B<Pre-Dependency> appropriée est "
# type: textblock
#. type: textblock
#: dh_makeshlibs:58
+#, fuzzy
+#| msgid ""
+#| "By default, the shlibs file generated by this program does not make "
+#| "packages depend on any particular version of the package containing the "
+#| "shared library. It may be necessary for you to add some version "
+#| "dependancy information to the shlibs file. If B<-V> is specified with no "
+#| "dependency information, the current upstream version of the package is "
+#| "plugged into a dependency that looks like \"I<packagename> B<(=E<gt>> "
+#| "I<packageversion>B<)>\". Note that in debhelper compatibility levels "
+#| "before v4, the Debian part of the package version number is also "
+#| "included. If B<-V> is specified with parameters, the parameters can be "
+#| "used to specify the exact dependency information needed (be sure to "
+#| "include the package name)."
msgid ""
"By default, the shlibs file generated by this program does not make packages "
"depend on any particular version of the package containing the shared "
-"library. It may be necessary for you to add some version dependancy "
+"library. It may be necessary for you to add some version dependency "
"information to the shlibs file. If B<-V> is specified with no dependency "
"information, the current upstream version of the package is plugged into a "
-"dependency that looks like \"I<packagename> B<(
=E<gt>> I<packageversion>B<)>"
+"dependency that looks like \"I<packagename> B<(
E<gt>>= I<packageversion>B<)>"
"\". Note that in debhelper compatibility levels before v4, the Debian part "
"of the package version number is also included. If B<-V> is specified with "
"parameters, the parameters can be used to specify the exact dependency "
# type: textblock
#. type: textblock
#: dh_python:19
+#, fuzzy
+#| msgid ""
+#| "Note: This program is deprecated. You should use B<dh_pysupport> or "
+#| "B<dh_pycentral> instead. This program will do nothing if F<debian/"
+#| "pycompat> or a B<Python-Version> F<control> file field exists."
msgid ""
-"Note: This program is deprecated. You should use B<dh_pysupport> or "
-"B<dh_pycentral> instead. This program will do nothing if F<debian/pycompat> "
-"or a B<Python-Version> F<control> file field exists."
+"Note: This program is deprecated. You should use B<dh_python2> instead. "
+"This program will do nothing if F<debian/pycompat> or a B<Python-Version> "
+"F<control> file field exists."
msgstr ""
"Notez bien que ce programme est obsolète. Il faut utiliser B<dh_pysupport> "
"ou B<dh_pycentral> à la place. Ce programme ne fera rien si le champ "
msgid "Andrew Stribblehill <ads@debian.org>"
msgstr "Andrew Stribblehill <ads@debian.org>"
+# type: =head2
+#~ msgid "Debhelper compatibility levels"
+#~ msgstr "Niveaux de compatibilité de debhelper"
+
+# type: =head2
+#~ msgid "Other notes"
+#~ msgstr "Autres remarques"
+
+# type: textblock
+#~ msgid ""
+#~ "In general, if any debhelper program needs a directory to exist under "
+#~ "B<debian/>, it will create it. I haven't bothered to document this in all "
+#~ "the man pages, but for example, B<dh_installdeb> knows to make debian/"
+#~ "I<package>/DEBIAN/ before trying to put files there, B<dh_installmenu> "
+#~ "knows you need a debian/I<package>/usr/share/menu/ before installing the "
+#~ "menu files, etc."
+#~ msgstr ""
+#~ "Généralement, si un programme de debhelper a besoin qu'un répertoire "
+#~ "existe dans B<debian/>, il le créera. Ce comportement n'est pas documenté "
+#~ "dans toutes les pages de manuel, mais, par exemple, le B<dh_installdeb> "
+#~ "sait qu'il doit créer le répertoire debian/I<paquet>/DEBIAN/ avant de "
+#~ "tenter de mettre des fichiers dedans. De même, B<dh_installmenu> sait "
+#~ "qu'il est nécessaire d'avoir un répertoire debian/I<paquet>/usr/share/"
+#~ "menu/ avant d'installer les fichiers menu, etc."
+
+# type: textblock
+#~ msgid ""
+#~ "If your package is a Python package, B<dh> will use B<dh_pysupport> by "
+#~ "default. This is how to use B<dh_pycentral> instead."
+#~ msgstr ""
+#~ "Si le paquet est un paquet Python, B<dh> utilisera B<dh_pysupport> par "
+#~ "défaut. Voici comment utiliser B<dh_pycentral> à la place :"
+
+# type: =head2
+#~ msgid "compatibility level 7 and above."
+#~ msgstr "Compatibilité avec le niveau 7 et suivants."
+
# type: =item
#~ msgid "B<--sourcedir=dir>"
#~ msgstr "B<--sourcedir=répertoire>"
projects / debhelper.git / blobdiff