msgid ""
msgstr ""
"Project-Id-Version: debhelper manpages\n"
-"POT-Creation-Date: 2009-07-01 15:31-0300\n"
+"POT-Creation-Date: 2009-09-01 13:48-0300\n"
"PO-Revision-Date: 2006-11-19 20:50+0100\n"
"Last-Translator: Valery Perrin <valery.perrin.debian@free.fr>\n"
"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
# type: textblock
#. type: textblock
#: debhelper.pod:96
-msgid "Act on all architecture dependent packages."
+#, fuzzy
+msgid ""
+"Act on architecture dependent packages that should be built for the build "
+"architecture."
msgstr "Construit tous les paquets dépendants d'une architecture."
# type: =item
#. type: =item
-#: debhelper.pod:98
+#: debhelper.pod:99
msgid "B<-i>, B<--indep>"
msgstr "B<-i>, B<--indep>"
# type: textblock
#. type: textblock
-#: debhelper.pod:100
+#: debhelper.pod:101
msgid "Act on all architecture independent packages."
msgstr "Construit tous les paquets indépendants de l'architecture."
# type: =item
#. type: =item
-#: debhelper.pod:102
+#: debhelper.pod:103
msgid "B<->I<ppackage>, B<--package=>I<package>"
msgstr "B<-p>I<paquet>, B<--package=>I<paquet>"
# type: textblock
#. type: textblock
-#: debhelper.pod:104
+#: debhelper.pod:105
msgid ""
"Act on the package named \"package\". This option may be specified multiple "
"times to make debhelper operate on a given set of packages."
# type: =item
#. type: =item
-#: debhelper.pod:107
+#: debhelper.pod:108
msgid "B<-s>, B<--same-arch>"
msgstr "B<-s>, B<--same-arch>"
-# type: textblock
#. type: textblock
-#: debhelper.pod:109
+#: debhelper.pod:110
msgid ""
-"This is a smarter version of the -a flag, that is used in some rare "
-"circumstances. It understands that if the control file lists \"Architecture: "
-"i386\" for the package, the package should not be acted on on other "
-"architectures. So this flag makes the command act on all \"Architecture: any"
-"\" packages, as well as on any packages that have the current architecture "
-"explicitly specified. Contrast to the -a flag, which makes the command work "
-"on all packages that are not architecture independent."
+"This used to be a smarter version of the -a flag, but the -a flag is now "
+"equally smart."
msgstr ""
-"Il s'agit d'une version plus astucieuse de l'option -a, employée dans "
-"quelques rares cas. Grâce à cette option, si le fichier de contrôle du "
-"paquet comporte le champ S<« Architecture: i386 »>, debhelper ne construira "
-"pas le paquet pour d'autres architectures. De cette façon, cette option "
-"construit tous les paquets marqués S<«Architecture: any »> ainsi que tous les "
-"paquets dont l'architecture mentionnée correspond à l'architecture courante. "
-"Ce comportement est à l'opposé de l'option -a, qui construit seulement les "
-"paquets qui ne sont pas indépendants de l'architecture."
# type: =item
#. type: =item
-#: debhelper.pod:117
+#: debhelper.pod:113
msgid "B<-N>I<package>, B<--no-package=>I<package>"
msgstr "B<-N>I<paquet>, B<--no-package=>I<paquet>"
# type: textblock
#. type: textblock
-#: debhelper.pod:119
+#: debhelper.pod:115
msgid ""
"Do not act on the specified package even if an -a, -i, or -p option lists "
"the package as one that should be acted on."
# type: =item
#. type: =item
-#: debhelper.pod:122
+#: debhelper.pod:118
#, fuzzy
msgid "B<--remaining-packages>"
msgstr "B<--mainpackage=>I<paquet>"
#. type: textblock
-#: debhelper.pod:124
+#: debhelper.pod:120
msgid ""
"Do not act on the packages which have already been acted on by this "
"debhelper command earlier (i.e. if the command is present in the package "
# type: =item
#. type: =item
-#: debhelper.pod:130
+#: debhelper.pod:126
#, fuzzy
msgid "B<--ignore=>I<file>"
msgstr "B<--name=>I<nom>"
# type: textblock
#. type: textblock
-#: debhelper.pod:132
+#: debhelper.pod:128
msgid ""
"Ignore the specified file. This can be used if debian/ contains a debhelper "
"config file that a debhelper command should not act on. Note that debian/"
# type: textblock
#. type: textblock
-#: debhelper.pod:137
+#: debhelper.pod:133
msgid ""
"For example, if upstream ships a debian/init that you don't want "
"dh_installinit to install, use --ignore=debian/init"
# type: =item
#. type: =item
-#: debhelper.pod:140
+#: debhelper.pod:136
msgid "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
msgstr "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
# type: textblock
#. type: textblock
-#: debhelper.pod:142
+#: debhelper.pod:138
msgid ""
"Use \"tmpdir\" for package build directory. The default is debian/<package>"
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:144
+#: debhelper.pod:140
msgid "B<--mainpackage=>I<package>"
msgstr "B<--mainpackage=>I<paquet>"
# type: textblock
#. type: textblock
-#: debhelper.pod:146
+#: debhelper.pod:142
msgid ""
"This little-used option changes the package which debhelper considers the "
"\"main package\", that is, the first one listed in debian/control, and the "
# type: =head1
#. type: =head1
-#: debhelper.pod:153
+#: debhelper.pod:149
msgid "COMMON DEBHELPER OPTIONS"
msgstr "OPTIONS COURANTES DE DEBHELPER"
# type: textblock
#. type: textblock
-#: debhelper.pod:155
+#: debhelper.pod:151
msgid ""
"The following command line options are supported by some debhelper "
"programs. See the man page of each program for a complete explanation of "
# type: =item
#. type: =item
-#: debhelper.pod:161
+#: debhelper.pod:157
msgid "B<-n>"
msgstr "B<-n>"
# type: textblock
#. type: textblock
-#: debhelper.pod:163
+#: debhelper.pod:159
msgid "Do not modify postinst/postrm/etc scripts."
msgstr ""
"Ne pas modifier les scripts de maintenance du paquet (postinst, postrm, "
# type: =item
#. type: =item
-#: debhelper.pod:165 dh_compress:43 dh_makeshlibs:66 dh_md5sums:37
+#: debhelper.pod:161 dh_compress:43 dh_makeshlibs:66 dh_md5sums:37
#: dh_shlibdeps:36 dh_strip:39
msgid "B<-X>I<item>, B<--exclude=>I<item>"
msgstr "B<-X>I<élément>, B<--exclude=>I<élément>"
# type: textblock
#. type: textblock
-#: debhelper.pod:167
+#: debhelper.pod:163
msgid ""
"Exclude an item from processing. This option may be used multiple times, to "
"exclude more than one thing."
# type: =item
#. type: =item
-#: debhelper.pod:170 dh_compress:51 dh_installdirs:32 dh_installdocs:53
+#: debhelper.pod:166 dh_compress:51 dh_installdirs:32 dh_installdocs:53
#: dh_installexamples:33 dh_installinfo:32 dh_installman:62 dh_link:52
msgid "B<-A>, B<--all>"
msgstr "B<-A>, B<--all>"
# type: textblock
#. type: textblock
-#: debhelper.pod:172
+#: debhelper.pod:168
msgid ""
"Makes files or other items that are specified on the command line take "
"effect in ALL packages acted on, not just the first."
"commande concernent TOUS les paquets construits et pas seulement le premier."
#. type: =head1
-#: debhelper.pod:177
+#: debhelper.pod:173
msgid "BUILD SYSTEM OPTIONS"
msgstr ""
#. type: textblock
-#: debhelper.pod:179
+#: debhelper.pod:175
msgid ""
"The following command line options are supported by all of the dh_auto_* "
"debhelper programs. These programs support a variety of build systems, and "
# type: =item
#. type: =item
-#: debhelper.pod:186
+#: debhelper.pod:182
#, fuzzy
msgid "B<-S>I<buildsystem>, B<--buildsystem=>I<buildsystem>"
msgstr "B<-X>I<élément>, B<--exclude=>I<élément>"
#. type: textblock
-#: debhelper.pod:188
+#: debhelper.pod:184
msgid ""
"Force use of the specified I<buildsystem>, instead of trying to auto-select "
"one which might be applicable for the package."
# type: =item
#. type: =item
-#: debhelper.pod:191
+#: debhelper.pod:187
#, fuzzy
msgid "B<-D>I<directory>, B<--sourcedirectory=>I<directory>"
msgstr "B<-l>I<répertoire>[:répertoire:répertoire:..]"
#. type: textblock
-#: debhelper.pod:193
+#: debhelper.pod:189
msgid ""
"Assume that the original package source tree is at the specified "
"I<directory> rather than the top level directory of the Debian source "
# type: =item
#. type: =item
-#: debhelper.pod:197
+#: debhelper.pod:193
#, fuzzy
msgid "B<-B>[I<directory>], B<--builddirectory>=[I<directory>]"
msgstr "B<-l>I<répertoire>[:répertoire:répertoire:..]"
#. type: textblock
-#: debhelper.pod:199
+#: debhelper.pod:195
msgid ""
"Enable out of source building and use the specified I<directory> as the "
"build directory. If I<directory> parameter is omitted, a default build "
msgstr ""
#. type: textblock
-#: debhelper.pod:203
+#: debhelper.pod:199
msgid ""
"If this option is not specified, building will be done in source by default "
"unless the build system requires or prefers out of source tree building. In "
msgstr ""
#. type: textblock
-#: debhelper.pod:208
+#: debhelper.pod:204
msgid ""
"If the build system prefers out of source tree building but still allows in "
"source building, the latter can be re-enabled by passing a build directory "
# type: =item
#. type: =item
-#: debhelper.pod:212
+#: debhelper.pod:208
#, fuzzy
msgid "B<--list>, B<-l>"
msgstr "B<-A>, B<--all>"
#. type: textblock
-#: debhelper.pod:214
+#: debhelper.pod:210
msgid ""
"List all build systems supported by debhelper on this system. The list "
"includes both default and third party build systems (marked as such). Also "
# type: =head1
#. type: =head1
-#: debhelper.pod:221 dh_installcatalogs:52 dh_installdocs:81
+#: debhelper.pod:217 dh_installcatalogs:52 dh_installdocs:81
#: dh_installemacsen:54 dh_installexamples:50 dh_installinit:110
#: dh_installman:79 dh_installmime:41 dh_installmodules:60 dh_installwm:53
#: dh_installxfonts:37 dh_movefiles:58 dh_strip:68 dh_usrlocal:49
# type: =head2
#. type: =head2
-#: debhelper.pod:223
+#: debhelper.pod:219
msgid "Multiple binary package support"
msgstr "Prise en charge de plusieurs paquets binaires"
# type: textblock
#. type: textblock
-#: debhelper.pod:225
+#: debhelper.pod:221
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
# type: textblock
#. type: textblock
-#: debhelper.pod:233
+#: debhelper.pod:229
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
# type: =head2
#. type: =head2
-#: debhelper.pod:239
+#: debhelper.pod:235
msgid "Automatic generation of debian install scripts"
msgstr "Génération automatique des scripts Debian de maintenance du paquet"
# type: textblock
#. type: textblock
-#: debhelper.pod:241
+#: debhelper.pod:237
msgid ""
"Some debhelper commands will automatically generate parts of debian "
"maintainer scripts. If you want these automatically generated things "
# type: textblock
#. type: textblock
-#: debhelper.pod:248
+#: debhelper.pod:244
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
# type: textblock
#. type: textblock
-#: debhelper.pod:251
+#: debhelper.pod:247
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
# type: textblock
#. type: textblock
-#: debhelper.pod:254
+#: debhelper.pod:250
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a perl script. If you would like to embed it into a perl script, here "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:259
+#: debhelper.pod:255
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
# type: =head2
#. type: =head2
-#: debhelper.pod:265
+#: debhelper.pod:261
msgid "Automatic generation of miscellaneous dependencies."
msgstr "Génération automatique des diverses dépendances."
# type: textblock
#. type: textblock
-#: debhelper.pod:267
+#: debhelper.pod:263
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
# type: textblock
#. type: textblock
-#: debhelper.pod:275
+#: debhelper.pod:271
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called "
# type: textblock
#. type: textblock
-#: debhelper.pod:280
+#: debhelper.pod:276
msgid ""
"This is entirely independent of the standard ${shlibs:Depends} generated by "
"L<dh_makeshlibs(1)>, and the ${perl:Depends} generated by L<dh_perl(1)>. "
# type: =head2
#. type: =head2
-#: debhelper.pod:285
+#: debhelper.pod:281
msgid "Package build directories"
msgstr "Répertoires de construction du paquet"
# type: textblock
#. type: textblock
-#: debhelper.pod:287
+#: debhelper.pod:283
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/<package>."
# type: textblock
#. type: textblock
-#: debhelper.pod:290
+#: debhelper.pod:286
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the -P flag. For example, \"dh_installdocs -Pdebian/tmp\", will "
# type: =head2
#. type: =head2
-#: debhelper.pod:298
+#: debhelper.pod:294
msgid "Debhelper compatibility levels"
msgstr "Niveaux de compatibilité de debhelper"
# type: textblock
#. type: textblock
-#: debhelper.pod:300
+#: debhelper.pod:296
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
# type: textblock
#. type: textblock
-#: debhelper.pod:307
+#: debhelper.pod:303
#, fuzzy
msgid ""
"Tell debhelper what compatibility level to use by writing a number to debian/"
# type: verbatim
#. type: verbatim
-#: debhelper.pod:310
+#: debhelper.pod:306
#, fuzzy, no-wrap
msgid ""
" % echo 7 > debian/compat\n"
# type: textblock
#. type: textblock
-#: debhelper.pod:312
+#: debhelper.pod:308
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
# type: textblock
#. type: textblock
-#: debhelper.pod:319
+#: debhelper.pod:315
msgid "These are the available compatibility levels:"
msgstr "Les niveaux de compatibilité sont les S<suivants :>"
# type: =item
#. type: =item
-#: debhelper.pod:323
+#: debhelper.pod:319
msgid "V1"
msgstr "V1"
# type: textblock
#. type: textblock
-#: debhelper.pod:325
+#: debhelper.pod:321
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use debian/tmp as the package tree "
# type: textblock
#. type: textblock
-#: debhelper.pod:330 debhelper.pod:337 debhelper.pod:360 debhelper.pod:389
+#: debhelper.pod:326 debhelper.pod:333 debhelper.pod:356 debhelper.pod:385
msgid "This mode is deprecated."
msgstr "Ce mode est déconseillé."
# type: =item
#. type: =item
-#: debhelper.pod:332
+#: debhelper.pod:328
msgid "V2"
msgstr "V2"
# type: textblock
#. type: textblock
-#: debhelper.pod:334
+#: debhelper.pod:330
msgid ""
"In this mode, debhelper will consistently use debian/<package> as the "
"package tree directory for every package that is built."
# type: =item
#. type: =item
-#: debhelper.pod:339
+#: debhelper.pod:335
msgid "V3"
msgstr "V3"
# type: textblock
#. type: textblock
-#: debhelper.pod:341
+#: debhelper.pod:337
msgid "This mode works like V2, with the following additions:"
msgstr "Ce mode fonctionne comme V2 mais avec les ajouts S<suivants :>"
# type: =item
#. type: =item
-#: debhelper.pod:345 debhelper.pod:350 debhelper.pod:354 debhelper.pod:368
-#: debhelper.pod:373 debhelper.pod:378 debhelper.pod:383 debhelper.pod:397
-#: debhelper.pod:401 debhelper.pod:406 debhelper.pod:410 debhelper.pod:422
-#: debhelper.pod:427 debhelper.pod:433 debhelper.pod:439 debhelper.pod:454
-#: debhelper.pod:461 debhelper.pod:465 debhelper.pod:469
+#: debhelper.pod:341 debhelper.pod:346 debhelper.pod:350 debhelper.pod:364
+#: debhelper.pod:369 debhelper.pod:374 debhelper.pod:379 debhelper.pod:393
+#: debhelper.pod:397 debhelper.pod:402 debhelper.pod:406 debhelper.pod:418
+#: debhelper.pod:423 debhelper.pod:429 debhelper.pod:435 debhelper.pod:450
+#: debhelper.pod:457 debhelper.pod:461 debhelper.pod:465
msgid "-"
msgstr "-"
# type: textblock
#. type: textblock
-#: debhelper.pod:347
+#: debhelper.pod:343
msgid ""
"Debhelper config files support globbing via * and ?, when appropriate. To "
"turn this off and use those characters raw, just prefix with a backslash."
# type: textblock
#. type: textblock
-#: debhelper.pod:352
+#: debhelper.pod:348
msgid "dh_makeshlibs makes the postinst and postrm scripts call ldconfig."
msgstr ""
"Les scripts de maintenance du paquet (postinst et postrm) feront appel à "
# type: textblock
#. type: textblock
-#: debhelper.pod:356
+#: debhelper.pod:352
msgid ""
"Every file in etc/ is automatically flagged as a conffile by dh_installdeb."
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:362
+#: debhelper.pod:358
msgid "V4"
msgstr "V4"
# type: textblock
#. type: textblock
-#: debhelper.pod:364
+#: debhelper.pod:360
msgid "Changes from V3 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
#. type: textblock
-#: debhelper.pod:370
+#: debhelper.pod:366
msgid ""
"dh_makeshlibs -V will not include the debian part of the version number in "
"the generated dependency line in the shlibs file."
# type: textblock
#. type: textblock
-#: debhelper.pod:375
+#: debhelper.pod:371
msgid ""
"You are encouraged to put the new ${misc:Depends} into debian/control to "
"supplement the ${shlibs:Depends} field."
# type: textblock
#. type: textblock
-#: debhelper.pod:380
+#: debhelper.pod:376
msgid ""
"dh_fixperms will make all files in bin/ directories and in etc/init.d "
"executable."
# type: textblock
#. type: textblock
-#: debhelper.pod:385
+#: debhelper.pod:381
msgid "dh_link will correct existing links to conform with policy."
msgstr ""
"dh_link corrigera les liens existants pour les rendre conformes à la Charte "
# type: =item
#. type: =item
-#: debhelper.pod:391
+#: debhelper.pod:387
msgid "V5"
msgstr "V5"
# type: textblock
#. type: textblock
-#: debhelper.pod:393
+#: debhelper.pod:389
#, fuzzy
msgid "Changes from V4 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
#. type: textblock
-#: debhelper.pod:399
+#: debhelper.pod:395
msgid "Comments are ignored in debhelper config files."
msgstr ""
"Les commentaires sont ignorés dans les fichiers de configuration de "
# type: textblock
#. type: textblock
-#: debhelper.pod:403
+#: debhelper.pod:399
msgid ""
"dh_strip --dbg-package now specifies the name of a package to put debugging "
"symbols in, not the packages to take the symbols from."
# type: textblock
#. type: textblock
-#: debhelper.pod:408
+#: debhelper.pod:404
msgid "dh_installdocs skips installing empty files."
msgstr "dh_installdocs saute l'installation des fichiers vides."
# type: textblock
#. type: textblock
-#: debhelper.pod:412
+#: debhelper.pod:408
msgid "dh_install errors out if wildcards expand to nothing."
msgstr ""
"dh_install génère des erreurs si les jokers (wildcards) ne correspondent à "
# type: =item
#. type: =item
-#: debhelper.pod:416
+#: debhelper.pod:412
msgid "V6"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:418
+#: debhelper.pod:414
#, fuzzy
msgid "Changes from V5 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
#. type: textblock
-#: debhelper.pod:424
+#: debhelper.pod:420
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the prerm and postrm scripts."
# type: textblock
#. type: textblock
-#: debhelper.pod:429
+#: debhelper.pod:425
#, fuzzy
msgid ""
"dh_installwm will install a slave manpage link for x-window-manager.1.gz, if "
# type: textblock
#. type: textblock
-#: debhelper.pod:435
+#: debhelper.pod:431
msgid ""
"dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE, "
"if it was set to a list of things to exclude, such as \"CVS:.svn:.git\". Now "
# type: textblock
#. type: textblock
-#: debhelper.pod:441
+#: debhelper.pod:437
msgid ""
"dh_installman allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
# type: =item
#. type: =item
-#: debhelper.pod:446
+#: debhelper.pod:442
msgid "V7"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:448
+#: debhelper.pod:444
#, fuzzy
msgid "This is the recommended mode of operation."
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:450
+#: debhelper.pod:446
#, fuzzy
msgid "Changes from V6 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
#. type: textblock
-#: debhelper.pod:456
+#: debhelper.pod:452
msgid ""
"dh_install, will fall back to looking for files in debian/tmp if it doesn't "
"find them in the current directory (or wherever you tell it look using --"
# type: textblock
#. type: textblock
-#: debhelper.pod:463
+#: debhelper.pod:459
msgid "dh_clean will read debian/clean and delete files listed there."
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:467
+#: debhelper.pod:463
msgid "dh_clean will delete toplevel *-stamp files."
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:471
+#: debhelper.pod:467
msgid ""
"dh_installchangelogs will guess at what file is the upstream changelog if "
"none is specified."
# type: =head2
#. type: =head2
-#: debhelper.pod:478
+#: debhelper.pod:474
msgid "Doc directory symlinks"
msgstr "Liens symboliques vers le répertoire de documentation"
# type: textblock
#. type: textblock
-#: debhelper.pod:480
+#: debhelper.pod:476
msgid ""
"Sometimes it is useful to make a package not contain a /usr/share/doc/"
"package directory at all, instead placing just a dangling symlink in the "
# type: =head2
#. type: =head2
-#: debhelper.pod:489
+#: debhelper.pod:485
msgid "udebs"
msgstr "udebs"
# type: textblock
#. type: textblock
-#: debhelper.pod:491
+#: debhelper.pod:487
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"XC-Package-Type: udeb\" to the package's stanza in debian/control, and "
# type: =head2
#. type: =head2
-#: debhelper.pod:498
+#: debhelper.pod:494
msgid "Other notes"
msgstr "Autres remarques"
# type: textblock
#. type: textblock
-#: debhelper.pod:500
+#: debhelper.pod:496
msgid ""
"In general, if any debhelper program needs a directory to exist under "
"debian/, it will create it. I haven't bothered to document this in all the "
# type: textblock
#. type: textblock
-#: debhelper.pod:506
+#: debhelper.pod:502
#, fuzzy
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:512
+#: debhelper.pod:508
#, fuzzy, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
# type: =head1
#. type: =head1
-#: debhelper.pod:514
+#: debhelper.pod:510
msgid "ENVIRONMENT"
msgstr "VARIABLES D'ENVIRONNEMENT"
# type: =item
#. type: =item
-#: debhelper.pod:518
+#: debhelper.pod:514
msgid "DH_VERBOSE"
msgstr "DH_VERBOSE"
# type: textblock
#. type: textblock
-#: debhelper.pod:520
+#: debhelper.pod:516
msgid ""
"Set to 1 to enable verbose mode. Debhelper will output every command it runs "
"that modifies files on the build system."
# type: =item
#. type: =item
-#: debhelper.pod:523
+#: debhelper.pod:519
msgid "DH_COMPAT"
msgstr "DH_COMPAT"
# type: textblock
#. type: textblock
-#: debhelper.pod:525
+#: debhelper.pod:521
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in debian/compat."
# type: =item
#. type: =item
-#: debhelper.pod:528
+#: debhelper.pod:524
msgid "DH_NO_ACT"
msgstr "DH_NO_ACT"
# type: textblock
#. type: textblock
-#: debhelper.pod:530
+#: debhelper.pod:526
msgid "Set to 1 to enable no-act mode."
msgstr "Mettre cette variable à 1 pour activer le mode simulation (no-act)."
# type: =item
#. type: =item
-#: debhelper.pod:532
+#: debhelper.pod:528
msgid "DH_OPTIONS"
msgstr "DH_OPTIONS"
# type: textblock
#. type: textblock
-#: debhelper.pod:534
+#: debhelper.pod:530
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
# type: textblock
#. type: textblock
-#: debhelper.pod:538
+#: debhelper.pod:534
#, fuzzy
msgid ""
"This is useful in some situations, for example, if you need to pass -p to "
# type: =item
#. type: =item
-#: debhelper.pod:543
+#: debhelper.pod:539
msgid "DH_ALWAYS_EXCLUDE"
msgstr "DH_ALWAYS_EXCLUDE"
# type: textblock
#. type: textblock
-#: debhelper.pod:545
+#: debhelper.pod:541
msgid ""
"If set, this adds the value the variable is set to to the -X options of all "
"commands that support the -X option. Moreover, dh_builddeb will rm -rf "
# type: textblock
#. type: textblock
-#: debhelper.pod:549
+#: debhelper.pod:545
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting DH_ALWAYS_EXCLUDE=CVS will prevent any CVS directories from "
# type: textblock
#. type: textblock
-#: debhelper.pod:556
+#: debhelper.pod:552
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"DH_ALWAYS_EXCLUDE=CVS:.svn"
# type: =head1
#. type: =head1
-#: debhelper.pod:561 dh_builddeb:88 dh_clean:130 dh_compress:192 dh_desktop:27
+#: debhelper.pod:557 dh_builddeb:88 dh_clean:130 dh_compress:192 dh_desktop:31
#: dh_fixperms:122 dh_gconf:104 dh_gencontrol:79 dh_installcatalogs:109
#: dh_installchangelogs:147 dh_installcron:61 dh_installdebconf:118
-#: dh_installdeb:94 dh_installdirs:83 dh_installdocs:223 dh_installemacsen:111
+#: dh_installdeb:97 dh_installdirs:83 dh_installdocs:224 dh_installemacsen:111
#: dh_installexamples:103 dh_installinfo:74 dh_installinit:224
#: dh_installlogcheck:51 dh_installlogrotate:50 dh_installmanpages:197
#: dh_installman:251 dh_installmenu:80 dh_installmime:85 dh_installmodules:124
#: dh_installpam:52 dh_install:267 dh_installppp:56 dh_installwm:107
#: dh_installxfonts:86 dh_link:223 dh_listpackages:29 dh_makeshlibs:227
-#: dh_md5sums:89 dh_movefiles:164 dh_perl:152 dh_python:282 dh_scrollkeeper:28
+#: dh_md5sums:89 dh_movefiles:164 dh_perl:145 dh_python:282 dh_scrollkeeper:28
#: dh_shlibdeps:168 dh_strip:227 dh_suidregister:117 dh_testdir:44
#: dh_testroot:27 dh_testversion:75 dh_undocumented:28 dh_usrlocal:114
msgid "SEE ALSO"
# type: =item
#. type: =item
-#: debhelper.pod:565
+#: debhelper.pod:561
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr "F</usr/share/doc/debhelper/examples/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:567
+#: debhelper.pod:563
msgid "A set of example debian/rules files that use debhelper."
msgstr ""
"Un ensemble d'exemples de fichiers debian/rules qui utilisent debhelper."
# type: =item
#. type: =item
-#: debhelper.pod:569
+#: debhelper.pod:565
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr "L<http://kitenet.net/~joey/code/debhelper/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:571
+#: debhelper.pod:567
msgid "Debhelper web site."
msgstr "Le site internet de debhelper."
# type: =head1
#. type: =head1
-#: debhelper.pod:575 dh_builddeb:94 dh_clean:136 dh_compress:198 dh_desktop:33
+#: debhelper.pod:571 dh_builddeb:94 dh_clean:136 dh_compress:198 dh_desktop:37
#: dh_fixperms:128 dh_gconf:110 dh_gencontrol:85 dh_installcatalogs:115
#: dh_installchangelogs:153 dh_installcron:67 dh_installdebconf:124
-#: dh_installdeb:100 dh_installdirs:89 dh_installdocs:229
+#: dh_installdeb:103 dh_installdirs:89 dh_installdocs:230
#: dh_installemacsen:117 dh_installexamples:109 dh_installinfo:80
#: dh_installinit:230 dh_installlogcheck:57 dh_installlogrotate:56
#: dh_installmanpages:203 dh_installman:257 dh_installmenu:88
#: dh_installmime:91 dh_installmodules:130 dh_installpam:58 dh_install:273
#: dh_installppp:62 dh_installwm:113 dh_installxfonts:92 dh_link:229
#: dh_listpackages:35 dh_makeshlibs:233 dh_md5sums:95 dh_movefiles:170
-#: dh_perl:158 dh_python:288 dh_scrollkeeper:34 dh_shlibdeps:174 dh_strip:233
+#: dh_perl:151 dh_python:288 dh_scrollkeeper:34 dh_shlibdeps:174 dh_strip:233
#: dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_testversion:81
#: dh_undocumented:34 dh_usrlocal:120
msgid "AUTHOR"
# type: textblock
#. type: textblock
-#: debhelper.pod:577 dh_builddeb:96 dh_clean:138 dh_compress:200
+#: debhelper.pod:573 dh_builddeb:96 dh_clean:138 dh_compress:200
#: dh_fixperms:130 dh_gencontrol:87 dh_installchangelogs:155 dh_installcron:69
-#: dh_installdebconf:126 dh_installdeb:102 dh_installdirs:91
-#: dh_installdocs:231 dh_installemacsen:119 dh_installexamples:111
+#: dh_installdebconf:126 dh_installdeb:105 dh_installdirs:91
+#: dh_installdocs:232 dh_installemacsen:119 dh_installexamples:111
#: dh_installinfo:82 dh_installinit:232 dh_installlogrotate:58
#: dh_installmanpages:205 dh_installman:259 dh_installmenu:90
#: dh_installmime:93 dh_installmodules:132 dh_installpam:60 dh_install:275
# type: textblock
#. type: textblock
#: dh_builddeb:18
+#, fuzzy
msgid ""
-"dh_builddeb simply calls L<dpkg-deb(8)> to build a debian package or "
+"dh_builddeb simply calls L<dpkg-deb(1)> to build a debian package or "
"packages."
msgstr ""
"dh_builddeb fait simplement appel à L<dpkg-deb(8)> pour construire un ou "
#. type: textblock
#: dh_builddeb:90 dh_clean:132 dh_compress:194 dh_fixperms:124 dh_gconf:106
#: dh_gencontrol:81 dh_installcatalogs:111 dh_installchangelogs:149
-#: dh_installcron:63 dh_installdebconf:120 dh_installdeb:96 dh_installdirs:85
-#: dh_installdocs:225 dh_installemacsen:113 dh_installexamples:105
+#: dh_installcron:63 dh_installdebconf:120 dh_installdeb:99 dh_installdirs:85
+#: dh_installdocs:226 dh_installemacsen:113 dh_installexamples:105
#: dh_installinfo:76 dh_installinit:226 dh_installlogcheck:53
#: dh_installlogrotate:52 dh_installmanpages:199 dh_installman:253
#: dh_installmime:87 dh_installmodules:126 dh_installpam:54 dh_install:269
#: dh_installppp:58 dh_installwm:109 dh_installxfonts:88 dh_link:225
#: dh_listpackages:31 dh_makeshlibs:229 dh_md5sums:91 dh_movefiles:166
-#: dh_perl:154 dh_python:284 dh_strip:229 dh_suidregister:119 dh_testdir:46
+#: dh_perl:147 dh_python:284 dh_strip:229 dh_suidregister:119 dh_testdir:46
#: dh_testroot:29 dh_testversion:77 dh_undocumented:30 dh_usrlocal:116
msgid "L<debhelper(7)>"
msgstr "L<debhelper(7)>"
# type: textblock
#. type: textblock
-#: dh_builddeb:92 dh_clean:134 dh_compress:196 dh_desktop:31 dh_fixperms:126
+#: dh_builddeb:92 dh_clean:134 dh_compress:196 dh_desktop:35 dh_fixperms:126
#: dh_gconf:108 dh_gencontrol:83 dh_installchangelogs:151 dh_installcron:65
-#: dh_installdebconf:122 dh_installdeb:98 dh_installdirs:87 dh_installdocs:227
-#: dh_installemacsen:115 dh_installexamples:107 dh_installinfo:78
-#: dh_installinit:228 dh_installlogrotate:54 dh_installmanpages:201
-#: dh_installman:255 dh_installmenu:86 dh_installmime:89 dh_installmodules:128
-#: dh_installpam:56 dh_install:271 dh_installppp:60 dh_installwm:111
-#: dh_installxfonts:90 dh_link:227 dh_listpackages:33 dh_makeshlibs:231
-#: dh_md5sums:93 dh_movefiles:168 dh_perl:156 dh_python:286 dh_scrollkeeper:32
-#: dh_shlibdeps:172 dh_strip:231 dh_suidregister:121 dh_testdir:48
-#: dh_testroot:31 dh_testversion:79 dh_undocumented:32 dh_usrlocal:118
+#: dh_installdebconf:122 dh_installdeb:101 dh_installdirs:87
+#: dh_installdocs:228 dh_installemacsen:115 dh_installexamples:107
+#: dh_installinfo:78 dh_installinit:228 dh_installlogrotate:54
+#: dh_installmanpages:201 dh_installman:255 dh_installmenu:86
+#: dh_installmime:89 dh_installmodules:128 dh_installpam:56 dh_install:271
+#: dh_installppp:60 dh_installwm:111 dh_installxfonts:90 dh_link:227
+#: dh_listpackages:33 dh_makeshlibs:231 dh_md5sums:93 dh_movefiles:168
+#: dh_perl:149 dh_python:286 dh_scrollkeeper:32 dh_shlibdeps:172 dh_strip:231
+#: dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_testversion:79
+#: dh_undocumented:32 dh_usrlocal:118
msgid "This program is a part of debhelper."
msgstr "Ce programme fait partie de debhelper."
"it no longer does anything, and is now deprecated."
msgstr ""
+#. type: textblock
+#: dh_desktop:21
+msgid ""
+"If a package ships desktop files, they just need to be installed in the "
+"correct location (/usr/share/applications) and they will be registered by "
+"the appropriate tools for the corresponding desktop environments."
+msgstr ""
+
# type: textblock
#. type: textblock
-#: dh_desktop:29 dh_scrollkeeper:30
+#: dh_desktop:33 dh_scrollkeeper:30
msgid "L<debhelper>"
msgstr "L<debhelper(7)>"
# type: textblock
#. type: textblock
-#: dh_desktop:35 dh_scrollkeeper:36
+#: dh_desktop:39 dh_scrollkeeper:36
msgid "Ross Burton <ross@burtonini.com>"
msgstr "Ross Burton <ross@burtonini.com>"
# type: textblock
#. type: textblock
-#: dh_perl:63 dh_strip:76
-msgid "Debian policy, version 3.0.1"
+#: dh_perl:63
+#, fuzzy
+msgid "Debian policy, version 3.8.3"
msgstr "Charte Debian, version 3.0.1"
# type: textblock
#. type: textblock
#: dh_perl:65
-msgid "Perl policy, version 1.18"
+#, fuzzy
+msgid "Perl policy, version 1.20"
msgstr "Charte Perl, version 1.18"
# type: textblock
#. type: textblock
-#: dh_perl:160
+#: dh_perl:153
msgid "Brendan O'Dea <bod@debian.org>"
msgstr "Brendan O'Dea <bod@debian.org>"
"Si la variable d'environnement DEB_BUILD_OPTIONS contient S<« nostrip »>, "
"rien ne sera dépouillé, conformément à la Charte Debian."
+# type: textblock
+#. type: textblock
+#: dh_strip:76
+msgid "Debian policy, version 3.0.1"
+msgstr "Charte Debian, version 3.0.1"
+
# type: textblock
#. type: textblock
#: dh_suidregister:5
msgid "Andrew Stribblehill <ads@debian.org>"
msgstr "Andrew Stribblehill <ads@debian.org>"
+# type: textblock
+#, fuzzy
+#~ msgid "Act on all architecture dependent packages."
+#~ msgstr "Construit tous les paquets indépendants de l'architecture."
+
+# type: textblock
+#~ msgid ""
+#~ "This is a smarter version of the -a flag, that is used in some rare "
+#~ "circumstances. It understands that if the control file lists "
+#~ "\"Architecture: i386\" for the package, the package should not be acted "
+#~ "on on other architectures. So this flag makes the command act on all "
+#~ "\"Architecture: any\" packages, as well as on any packages that have the "
+#~ "current architecture explicitly specified. Contrast to the -a flag, "
+#~ "which makes the command work on all packages that are not architecture "
+#~ "independent."
+#~ msgstr ""
+#~ "Il s'agit d'une version plus astucieuse de l'option -a, employée dans "
+#~ "quelques rares cas. Grâce à cette option, si le fichier de contrôle du "
+#~ "paquet comporte le champ S<« Architecture: i386 »>, debhelper ne "
+#~ "construira pas le paquet pour d'autres architectures. De cette façon, "
+#~ "cette option construit tous les paquets marqués S<«Architecture: any »> "
+#~ "ainsi que tous les paquets dont l'architecture mentionnée correspond à "
+#~ "l'architecture courante. Ce comportement est à l'opposé de l'option -a, "
+#~ "qui construit seulement les paquets qui ne sont pas indépendants de "
+#~ "l'architecture."
+
# type: textblock
#, fuzzy
#~ msgid ""
projects / debhelper.git / blobdiff