msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2011-06-24 14:29-0400\n"
+"POT-Creation-Date: 2011-08-23 15:26-0400\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
msgstr ""
#. type: =item
-#: debhelper.pod:101 dh:72
+#: debhelper.pod:101 dh:76
msgid "B<--no-act>"
msgstr ""
#. type: textblock
#: debhelper.pod:194
msgid ""
-"All of the B<dh_auto_>I<*> debhelper programs sets environment variables "
-"listed by B<dpkg-buildflags>, unless they are already set. They support "
-"DEB_BUILD_OPTIONS=noopt too."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:198
-msgid ""
"The following command line options are supported by all of the "
"B<dh_auto_>I<*> debhelper programs. These programs support a variety of "
"build systems, and normally heuristically determine which to use, and how to "
msgstr ""
#. type: =item
-#: debhelper.pod:205
+#: debhelper.pod:201
msgid "B<-S>I<buildsystem>, B<--buildsystem=>I<buildsystem>"
msgstr ""
#. type: textblock
-#: debhelper.pod:207
+#: debhelper.pod:203
msgid ""
"Force use of the specified I<buildsystem>, instead of trying to auto-select "
"one which might be applicable for the package."
msgstr ""
#. type: =item
-#: debhelper.pod:210
+#: debhelper.pod:206
msgid "B<-D>I<directory>, B<--sourcedirectory=>I<directory>"
msgstr ""
#. type: textblock
-#: debhelper.pod:212
+#: debhelper.pod:208
msgid ""
"Assume that the original package source tree is at the specified "
"I<directory> rather than the top level directory of the Debian source "
msgstr ""
#. type: =item
-#: debhelper.pod:216
+#: debhelper.pod:212
msgid "B<-B>[I<directory>], B<--builddirectory=>[I<directory>]"
msgstr ""
#. type: textblock
-#: debhelper.pod:218
+#: debhelper.pod:214
msgid ""
"Enable out of source building and use the specified I<directory> as the "
"build directory. If I<directory> parameter is omitted, a default build "
msgstr ""
#. type: textblock
-#: debhelper.pod:222
+#: debhelper.pod:218
msgid ""
"If this option is not specified, building will be done in source by default "
"unless the build system requires or prefers out of source tree building. In "
msgstr ""
#. type: textblock
-#: debhelper.pod:227
+#: debhelper.pod:223
msgid ""
"If the build system prefers out of source tree building but still allows in "
"source building, the latter can be re-enabled by passing a build directory "
msgstr ""
#. type: =item
-#: debhelper.pod:231
+#: debhelper.pod:227
msgid "B<--parallel>"
msgstr ""
#. type: textblock
-#: debhelper.pod:233
+#: debhelper.pod:229
msgid ""
"Enable parallel builds if underlying build system supports them. The number "
"of parallel jobs is controlled by the B<DEB_BUILD_OPTIONS> environment "
msgstr ""
#. type: textblock
-#: debhelper.pod:238
+#: debhelper.pod:234
msgid ""
"If this option is not specified, debhelper currently defaults to not "
"allowing parallel package builds."
msgstr ""
#. type: =item
-#: debhelper.pod:241
+#: debhelper.pod:237
msgid "B<--max-parallel=>I<maximum>"
msgstr ""
#. type: textblock
-#: debhelper.pod:243
+#: debhelper.pod:239
msgid ""
"This option implies B<--parallel> and allows further limiting the number of "
"jobs that can be used in a parallel build. If the package build is known to "
msgstr ""
#. type: =item
-#: debhelper.pod:248 dh:52
+#: debhelper.pod:244 dh:52
msgid "B<--list>, B<-l>"
msgstr ""
#. type: textblock
-#: debhelper.pod:250
+#: debhelper.pod:246
msgid ""
"List all build systems supported by debhelper on this system. The list "
"includes both default and third party build systems (marked as such). Also "
msgstr ""
#. type: =head1
-#: debhelper.pod:257 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49
-msgid "NOTES"
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:259
-msgid "Multiple binary package support"
+#: debhelper.pod:253
+msgid "COMPATABILITY LEVELS"
msgstr ""
#. type: textblock
-#: debhelper.pod:261
-msgid ""
-"If your source package generates more than one binary package, debhelper "
-"programs will default to acting on all binary packages when run. If your "
-"source package happens to generate one architecture dependent package, and "
-"another architecture independent package, this is not the correct behavior, "
-"because you need to generate the architecture dependent packages in the "
-"binary-arch F<debian/rules> target, and the architecture independent "
-"packages in the binary-indep F<debian/rules> target."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:269
-msgid ""
-"To facilitate this, as well as give you more control over which packages are "
-"acted on by debhelper programs, all debhelper programs accept the B<-a>, "
-"B<-i>, B<-p>, and B<-s> parameters. These parameters are cumulative. If "
-"none are given, debhelper programs default to acting on all packages listed "
-"in the control file."
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:275
-msgid "Automatic generation of Debian install scripts"
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:277
-msgid ""
-"Some debhelper commands will automatically generate parts of Debian "
-"maintainer scripts. If you want these automatically generated things "
-"included in your existing Debian maintainer scripts, then you need to add "
-"B<#DEBHELPER#> to your scripts, in the place the code should be added. "
-"B<#DEBHELPER#> will be replaced by any auto-generated code when you run "
-"B<dh_installdeb>."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:284
-msgid ""
-"If a script does not exist at all and debhelper needs to add something to "
-"it, then debhelper will create the complete script."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:287
-msgid ""
-"All debhelper commands that automatically generate code in this way let it "
-"be disabled by the -n parameter (see above)."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:290
-msgid ""
-"Note that the inserted code will be shell code, so you cannot directly use "
-"it in a Perl script. If you would like to embed it into a Perl script, here "
-"is one way to do that (note that I made sure that $1, $2, etc are set with "
-"the set command):"
-msgstr ""
-
-#. type: verbatim
-#: debhelper.pod:295
-#, no-wrap
-msgid ""
-" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
-" #DEBHELPER#\n"
-" EOF\n"
-" system ($temp) / 256 == 0\n"
-" \tor die \"Problem with debhelper scripts: $!\";\n"
-"\n"
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:301
-msgid "Automatic generation of miscellaneous dependencies."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:303
-msgid ""
-"Some debhelper commands may make the generated package need to depend on "
-"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
-"package will generally need to depend on debconf. Or if you use "
-"L<dh_installxfonts(1)>, your package will generally need to depend on a "
-"particular version of xutils. Keeping track of these miscellaneous "
-"dependencies can be annoying since they are dependant on how debhelper does "
-"things, so debhelper offers a way to automate it."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:311
-msgid ""
-"All commands of this type, besides documenting what dependencies may be "
-"needed on their man pages, will automatically generate a substvar called "
-"B<${misc:Depends}>. If you put that token into your F<debian/control> file, "
-"it will be expanded to the dependencies debhelper figures you need."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:316
-msgid ""
-"This is entirely independent of the standard B<${shlibs:Depends}> generated "
-"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by "
-"L<dh_perl(1)>. You can choose not to use any of these, if debhelper's "
-"guesses don't match reality."
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:321
-msgid "Package build directories"
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:323
-msgid ""
-"By default, all debhelper programs assume that the temporary directory used "
-"for assembling the tree of files in a package is debian/I<package>."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:326
-msgid ""
-"Sometimes, you might want to use some other temporary directory. This is "
-"supported by the B<-P> flag. For example, \"B<dh_installdocs "
-"-Pdebian/tmp>\", will use B<debian/tmp> as the temporary directory. Note "
-"that if you use B<-P>, the debhelper programs can only be acting on a single "
-"package at a time. So if you have a package that builds many binary "
-"packages, you will need to also use the B<-p> flag to specify which binary "
-"package the debhelper program will act on."
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:334
-msgid "Debhelper compatibility levels"
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:336
+#: debhelper.pod:255
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
msgstr ""
#. type: textblock
-#: debhelper.pod:343
+#: debhelper.pod:262
msgid ""
"Tell debhelper what compatibility level to use by writing a number to "
"F<debian/compat>. For example, to turn on v8 mode:"
msgstr ""
#. type: verbatim
-#: debhelper.pod:346
+#: debhelper.pod:265
#, no-wrap
msgid ""
" % echo 8 > debian/compat\n"
msgstr ""
#. type: textblock
-#: debhelper.pod:348
+#: debhelper.pod:267
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
msgstr ""
#. type: textblock
-#: debhelper.pod:355
+#: debhelper.pod:274
msgid "These are the available compatibility levels:"
msgstr ""
#. type: =item
-#: debhelper.pod:359
+#: debhelper.pod:278
msgid "v1"
msgstr ""
#. type: textblock
-#: debhelper.pod:361
+#: debhelper.pod:280
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use F<debian/tmp> as the package tree "
msgstr ""
#. type: textblock
-#: debhelper.pod:366 debhelper.pod:373 debhelper.pod:396 debhelper.pod:425
+#: debhelper.pod:285 debhelper.pod:292 debhelper.pod:315 debhelper.pod:344
msgid "This mode is deprecated."
msgstr ""
#. type: =item
-#: debhelper.pod:368
+#: debhelper.pod:287
msgid "v2"
msgstr ""
#. type: textblock
-#: debhelper.pod:370
+#: debhelper.pod:289
msgid ""
"In this mode, debhelper will consistently use debian/I<package> as the "
"package tree directory for every package that is built."
msgstr ""
#. type: =item
-#: debhelper.pod:375
+#: debhelper.pod:294
msgid "v3"
msgstr ""
#. type: textblock
-#: debhelper.pod:377
+#: debhelper.pod:296
msgid "This mode works like v2, with the following additions:"
msgstr ""
#. type: =item
-#: debhelper.pod:381 debhelper.pod:386 debhelper.pod:390 debhelper.pod:404 debhelper.pod:409 debhelper.pod:414 debhelper.pod:419 debhelper.pod:433 debhelper.pod:437 debhelper.pod:442 debhelper.pod:446 debhelper.pod:458 debhelper.pod:463 debhelper.pod:469 debhelper.pod:475 debhelper.pod:488 debhelper.pod:495 debhelper.pod:499 debhelper.pod:503 debhelper.pod:518 debhelper.pod:522 debhelper.pod:530 debhelper.pod:535 debhelper.pod:549 debhelper.pod:554 debhelper.pod:559
+#: debhelper.pod:300 debhelper.pod:305 debhelper.pod:309 debhelper.pod:323 debhelper.pod:328 debhelper.pod:333 debhelper.pod:338 debhelper.pod:352 debhelper.pod:356 debhelper.pod:361 debhelper.pod:365 debhelper.pod:377 debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407 debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437 debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468 debhelper.pod:473 debhelper.pod:479 debhelper.pod:484 debhelper.pod:488
msgid "-"
msgstr ""
#. type: textblock
-#: debhelper.pod:383
+#: debhelper.pod:302
msgid ""
"Debhelper config files support globbing via B<*> and B<?>, when "
"appropriate. To turn this off and use those characters raw, just prefix with "
msgstr ""
#. type: textblock
-#: debhelper.pod:388
+#: debhelper.pod:307
msgid ""
"B<dh_makeshlibs> makes the F<postinst> and F<postrm> scripts call "
"B<ldconfig>."
msgstr ""
#. type: textblock
-#: debhelper.pod:392
+#: debhelper.pod:311
msgid ""
"Every file in F<etc/> is automatically flagged as a conffile by "
"B<dh_installdeb>."
msgstr ""
#. type: =item
-#: debhelper.pod:398
+#: debhelper.pod:317
msgid "v4"
msgstr ""
#. type: textblock
-#: debhelper.pod:400
+#: debhelper.pod:319
msgid "Changes from v3 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:406
+#: debhelper.pod:325
msgid ""
"B<dh_makeshlibs -V> will not include the Debian part of the version number "
"in the generated dependency line in the shlibs file."
msgstr ""
#. type: textblock
-#: debhelper.pod:411
+#: debhelper.pod:330
msgid ""
"You are encouraged to put the new B<${misc:Depends}> into F<debian/control> "
"to supplement the B<${shlibs:Depends}> field."
msgstr ""
#. type: textblock
-#: debhelper.pod:416
+#: debhelper.pod:335
msgid ""
"B<dh_fixperms> will make all files in F<bin/> directories and in "
"F<etc/init.d> executable."
msgstr ""
#. type: textblock
-#: debhelper.pod:421
+#: debhelper.pod:340
msgid "B<dh_link> will correct existing links to conform with policy."
msgstr ""
#. type: =item
-#: debhelper.pod:427
+#: debhelper.pod:346
msgid "v5"
msgstr ""
#. type: textblock
-#: debhelper.pod:429
+#: debhelper.pod:348
msgid "Changes from v4 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:435
+#: debhelper.pod:354
msgid "Comments are ignored in debhelper config files."
msgstr ""
#. type: textblock
-#: debhelper.pod:439
+#: debhelper.pod:358
msgid ""
"B<dh_strip --dbg-package> now specifies the name of a package to put "
"debugging symbols in, not the packages to take the symbols from."
msgstr ""
#. type: textblock
-#: debhelper.pod:444
+#: debhelper.pod:363
msgid "B<dh_installdocs> skips installing empty files."
msgstr ""
#. type: textblock
-#: debhelper.pod:448
+#: debhelper.pod:367
msgid "B<dh_install> errors out if wildcards expand to nothing."
msgstr ""
#. type: =item
-#: debhelper.pod:452
+#: debhelper.pod:371
msgid "v6"
msgstr ""
#. type: textblock
-#: debhelper.pod:454
+#: debhelper.pod:373
msgid "Changes from v5 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:460
+#: debhelper.pod:379
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the F<prerm> and F<postrm> scripts."
msgstr ""
#. type: textblock
-#: debhelper.pod:465
+#: debhelper.pod:384
msgid ""
"B<dh_installwm> will install a slave manpage link for "
"F<x-window-manager.1.gz>, if it sees the man page in F<usr/share/man/man1> "
msgstr ""
#. type: textblock
-#: debhelper.pod:471
+#: debhelper.pod:390
msgid ""
"B<dh_builddeb> did not previously delete everything matching "
"B<DH_ALWAYS_EXCLUDE>, if it was set to a list of things to exclude, such as "
msgstr ""
#. type: textblock
-#: debhelper.pod:477
+#: debhelper.pod:396
msgid ""
"B<dh_installman> allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
msgstr ""
#. type: =item
-#: debhelper.pod:482
+#: debhelper.pod:401
msgid "v7"
msgstr ""
#. type: textblock
-#: debhelper.pod:484
+#: debhelper.pod:403
msgid "Changes from v6 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:490
+#: debhelper.pod:409
msgid ""
"B<dh_install>, will fall back to looking for files in F<debian/tmp> if it "
"doesn't find them in the current directory (or wherever you tell it look "
msgstr ""
#. type: textblock
-#: debhelper.pod:497
+#: debhelper.pod:416
msgid "B<dh_clean> will read F<debian/clean> and delete files listed there."
msgstr ""
#. type: textblock
-#: debhelper.pod:501
+#: debhelper.pod:420
msgid "B<dh_clean> will delete toplevel F<*-stamp> files."
msgstr ""
#. type: textblock
-#: debhelper.pod:505
+#: debhelper.pod:424
msgid ""
"B<dh_installchangelogs> will guess at what file is the upstream changelog if "
"none is specified."
msgstr ""
#. type: =item
-#: debhelper.pod:510
+#: debhelper.pod:429
msgid "v8"
msgstr ""
#. type: textblock
-#: debhelper.pod:512
+#: debhelper.pod:431
msgid "This is the recommended mode of operation."
msgstr ""
#. type: textblock
-#: debhelper.pod:514
+#: debhelper.pod:433
msgid "Changes from v7 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:520
+#: debhelper.pod:439
msgid "Commands will fail rather than warning when they are passed unknown options."
msgstr ""
#. type: textblock
-#: debhelper.pod:524
+#: debhelper.pod:443
msgid ""
"B<dh_makeshlibs> will run B<dpkg-gensymbols> on all shared libraries that it "
"generates shlibs files for. So B<-X> can be used to exclude libraries. "
msgstr ""
#. type: textblock
-#: debhelper.pod:532
+#: debhelper.pod:451
msgid ""
"B<dh> requires the sequence to run be specified as the first parameter, and "
"any switches come after it. Ie, use \"B<dh $@ --foo>\", not \"B<dh --foo "
msgstr ""
#. type: textblock
-#: debhelper.pod:537
+#: debhelper.pod:456
msgid ""
"B<dh_auto_>I<*> prefer to use Perl's B<Module::Build> in preference to "
"F<Makefile.PL>."
msgstr ""
#. type: =item
-#: debhelper.pod:541
+#: debhelper.pod:460
msgid "v9"
msgstr ""
#. type: textblock
-#: debhelper.pod:543
-msgid "This compatability level is still open for development; use with caution."
+#: debhelper.pod:462
+msgid "This compatibility level is still open for development; use with caution."
msgstr ""
#. type: textblock
-#: debhelper.pod:545
+#: debhelper.pod:464
msgid "Changes from v8 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:551
+#: debhelper.pod:470
msgid ""
"Multiarch support. In particular, B<dh_auto_configure> passes multiarch "
"directories to autoconf in --libdir and --libexecdir."
msgstr ""
#. type: textblock
-#: debhelper.pod:556
+#: debhelper.pod:475
+msgid ""
+"dh allows defining custom build, build-arch, and build-indep targets in "
+"debian/rules, without needing to manually define the other targets that "
+"depend on them."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:481
msgid ""
-"dh supports use of standard targets in debian/rules without needing to "
-"manually define the dependencies between targets there."
+"B<dh_auto_configure> does not include the source package name in "
+"--libexecdir when using autoconf."
msgstr ""
#. type: textblock
-#: debhelper.pod:561
+#: debhelper.pod:486
+msgid "B<dh> does not default to enabling --with=python-support"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:490
msgid ""
-"<dh_auto_configure> does not include the source package name in --libexecdir "
-"when using autoconf."
+"All of the B<dh_auto_>I<*> debhelper programs and B<dh> set environment "
+"variables listed by B<dpkg-buildflags>, unless they are already set. They "
+"support DEB_BUILD_OPTIONS=noopt too."
+msgstr ""
+
+#. type: =head1
+#: debhelper.pod:498 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49
+msgid "NOTES"
+msgstr ""
+
+#. type: =head2
+#: debhelper.pod:500
+msgid "Multiple binary package support"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:502
+msgid ""
+"If your source package generates more than one binary package, debhelper "
+"programs will default to acting on all binary packages when run. If your "
+"source package happens to generate one architecture dependent package, and "
+"another architecture independent package, this is not the correct behavior, "
+"because you need to generate the architecture dependent packages in the "
+"binary-arch F<debian/rules> target, and the architecture independent "
+"packages in the binary-indep F<debian/rules> target."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:510
+msgid ""
+"To facilitate this, as well as give you more control over which packages are "
+"acted on by debhelper programs, all debhelper programs accept the B<-a>, "
+"B<-i>, B<-p>, and B<-s> parameters. These parameters are cumulative. If "
+"none are given, debhelper programs default to acting on all packages listed "
+"in the control file."
+msgstr ""
+
+#. type: =head2
+#: debhelper.pod:516
+msgid "Automatic generation of Debian install scripts"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:518
+msgid ""
+"Some debhelper commands will automatically generate parts of Debian "
+"maintainer scripts. If you want these automatically generated things "
+"included in your existing Debian maintainer scripts, then you need to add "
+"B<#DEBHELPER#> to your scripts, in the place the code should be added. "
+"B<#DEBHELPER#> will be replaced by any auto-generated code when you run "
+"B<dh_installdeb>."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:525
+msgid ""
+"If a script does not exist at all and debhelper needs to add something to "
+"it, then debhelper will create the complete script."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:528
+msgid ""
+"All debhelper commands that automatically generate code in this way let it "
+"be disabled by the -n parameter (see above)."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:531
+msgid ""
+"Note that the inserted code will be shell code, so you cannot directly use "
+"it in a Perl script. If you would like to embed it into a Perl script, here "
+"is one way to do that (note that I made sure that $1, $2, etc are set with "
+"the set command):"
+msgstr ""
+
+#. type: verbatim
+#: debhelper.pod:536
+#, no-wrap
+msgid ""
+" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
+" #DEBHELPER#\n"
+" EOF\n"
+" system ($temp) / 256 == 0\n"
+" \tor die \"Problem with debhelper scripts: $!\";\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: debhelper.pod:542
+msgid "Automatic generation of miscellaneous dependencies."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:544
+msgid ""
+"Some debhelper commands may make the generated package need to depend on "
+"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
+"package will generally need to depend on debconf. Or if you use "
+"L<dh_installxfonts(1)>, your package will generally need to depend on a "
+"particular version of xutils. Keeping track of these miscellaneous "
+"dependencies can be annoying since they are dependent on how debhelper does "
+"things, so debhelper offers a way to automate it."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:552
+msgid ""
+"All commands of this type, besides documenting what dependencies may be "
+"needed on their man pages, will automatically generate a substvar called "
+"B<${misc:Depends}>. If you put that token into your F<debian/control> file, "
+"it will be expanded to the dependencies debhelper figures you need."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:557
+msgid ""
+"This is entirely independent of the standard B<${shlibs:Depends}> generated "
+"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by "
+"L<dh_perl(1)>. You can choose not to use any of these, if debhelper's "
+"guesses don't match reality."
+msgstr ""
+
+#. type: =head2
+#: debhelper.pod:562
+msgid "Package build directories"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:564
+msgid ""
+"By default, all debhelper programs assume that the temporary directory used "
+"for assembling the tree of files in a package is debian/I<package>."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:567
+msgid ""
+"Sometimes, you might want to use some other temporary directory. This is "
+"supported by the B<-P> flag. For example, \"B<dh_installdocs "
+"-Pdebian/tmp>\", will use B<debian/tmp> as the temporary directory. Note "
+"that if you use B<-P>, the debhelper programs can only be acting on a single "
+"package at a time. So if you have a package that builds many binary "
+"packages, you will need to also use the B<-p> flag to specify which binary "
+"package the debhelper program will act on."
msgstr ""
#. type: =head2
-#: debhelper.pod:568
+#: debhelper.pod:575
msgid "udebs"
msgstr ""
#. type: textblock
-#: debhelper.pod:570
+#: debhelper.pod:577
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>, and "
msgstr ""
#. type: =head2
-#: debhelper.pod:577
-msgid "Other notes"
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:579
-msgid ""
-"In general, if any debhelper program needs a directory to exist under "
-"B<debian/>, it will create it. I haven't bothered to document this in all "
-"the man pages, but for example, B<dh_installdeb> knows to make "
-"debian/I<package>/DEBIAN/ before trying to put files there, "
-"B<dh_installmenu> knows you need a debian/I<package>/usr/share/menu/ before "
-"installing the menu files, etc."
+#: debhelper.pod:584
+msgid "Build depends"
msgstr ""
#. type: textblock
-#: debhelper.pod:585
+#: debhelper.pod:586
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in F<debian/control>. You should build-depend on a "
msgstr ""
#. type: verbatim
-#: debhelper.pod:591
+#: debhelper.pod:592
#, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
msgstr ""
#. type: =head1
-#: debhelper.pod:593
+#: debhelper.pod:594
msgid "ENVIRONMENT"
msgstr ""
#. type: =item
-#: debhelper.pod:597
+#: debhelper.pod:598
msgid "B<DH_VERBOSE>"
msgstr ""
#. type: textblock
-#: debhelper.pod:599
+#: debhelper.pod:600
msgid ""
"Set to B<1> to enable verbose mode. Debhelper will output every command it "
"runs that modifies files on the build system."
msgstr ""
#. type: =item
-#: debhelper.pod:602
+#: debhelper.pod:603
msgid "B<DH_COMPAT>"
msgstr ""
#. type: textblock
-#: debhelper.pod:604
+#: debhelper.pod:605
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in F<debian/compat>."
msgstr ""
#. type: =item
-#: debhelper.pod:607
+#: debhelper.pod:608
msgid "B<DH_NO_ACT>"
msgstr ""
#. type: textblock
-#: debhelper.pod:609
+#: debhelper.pod:610
msgid "Set to B<1> to enable no-act mode."
msgstr ""
#. type: =item
-#: debhelper.pod:611
+#: debhelper.pod:612
msgid "B<DH_OPTIONS>"
msgstr ""
#. type: textblock
-#: debhelper.pod:613
+#: debhelper.pod:614
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
msgstr ""
#. type: textblock
-#: debhelper.pod:617
+#: debhelper.pod:618
msgid ""
"This is useful in some situations, for example, if you need to pass B<-p> to "
"all debhelper commands that will be run. One good way to set B<DH_OPTIONS> "
msgstr ""
#. type: =item
-#: debhelper.pod:622
+#: debhelper.pod:623
msgid "B<DH_ALWAYS_EXCLUDE>"
msgstr ""
#. type: textblock
-#: debhelper.pod:624
+#: debhelper.pod:625
msgid ""
"If set, this adds the value the variable is set to to the B<-X> options of "
"all commands that support the B<-X> option. Moreover, B<dh_builddeb> will "
msgstr ""
#. type: textblock
-#: debhelper.pod:628
+#: debhelper.pod:629
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories from "
msgstr ""
#. type: textblock
-#: debhelper.pod:635
+#: debhelper.pod:636
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"B<DH_ALWAYS_EXCLUDE=CVS:.svn>"
msgstr ""
#. type: =head1
-#: debhelper.pod:640 dh:872 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122 dh_builddeb:91 dh_clean:139 dh_compress:204 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:280 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:66 dh_installlogrotate:50 dh_installman:258 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
+#: debhelper.pod:641 dh:866 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122 dh_builddeb:123 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:258 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
msgid "SEE ALSO"
msgstr ""
#. type: =item
-#: debhelper.pod:644
+#: debhelper.pod:645
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:646
+#: debhelper.pod:647
msgid "A set of example F<debian/rules> files that use debhelper."
msgstr ""
#. type: =item
-#: debhelper.pod:648
+#: debhelper.pod:649
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:650
+#: debhelper.pod:651
msgid "Debhelper web site."
msgstr ""
#. type: =head1
-#: debhelper.pod:654 dh:878 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130 dh_builddeb:97 dh_clean:145 dh_compress:210 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:286 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:72 dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
+#: debhelper.pod:655 dh:872 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130 dh_builddeb:129 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82 dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
msgid "AUTHOR"
msgstr ""
#. type: textblock
-#: debhelper.pod:656 dh:880 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:99 dh_clean:147 dh_compress:212 dh_fixperms:137 dh_gencontrol:90 dh_install:288 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:266 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
+#: debhelper.pod:657 dh:874 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:131 dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90 dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:266 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
msgid "Joey Hess <joeyh@debian.org>"
msgstr ""
msgstr ""
#. type: =head1
-#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 dh_auto_install:43 dh_auto_test:30 dh_bugfiles:50 dh_builddeb:21 dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 dh_installinfo:31 dh_installinit:48 dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 dh_makeshlibs:43 dh_md5sums:28 dh_movefiles:38 dh_perl:31 dh_prep:26 dh_python:39 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_usrlocal:39
+#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 dh_auto_install:43 dh_auto_test:30 dh_bugfiles:50 dh_builddeb:21 dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42 dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 dh_makeshlibs:43 dh_md5sums:28 dh_movefiles:38 dh_perl:31 dh_prep:26 dh_python:39 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_usrlocal:39
msgid "OPTIONS"
msgstr ""
#. type: textblock
#: dh:58
-msgid "Run commands in the sequence until and including I<cmd>, then stop."
+msgid ""
+"Run commands in the sequence until and including I<cmd>, then stop. "
+"(Deprecated)"
msgstr ""
#. type: =item
-#: dh:60
+#: dh:61
msgid "B<--before> I<cmd>"
msgstr ""
#. type: textblock
-#: dh:62
-msgid "Run commands in the sequence before I<cmd>, then stop."
+#: dh:63
+msgid "Run commands in the sequence before I<cmd>, then stop. (Deprecated)"
msgstr ""
#. type: =item
-#: dh:64
+#: dh:66
msgid "B<--after> I<cmd>"
msgstr ""
#. type: textblock
-#: dh:66
-msgid "Run commands in the sequence that come after I<cmd>."
+#: dh:68
+msgid "Run commands in the sequence that come after I<cmd>. (Deprecated)"
msgstr ""
#. type: =item
-#: dh:68
+#: dh:71
msgid "B<--remaining>"
msgstr ""
#. type: textblock
-#: dh:70
-msgid "Run all commands in the sequence that have yet to be run."
+#: dh:73
+msgid "Run all commands in the sequence that have yet to be run. (Deprecated)"
msgstr ""
#. type: textblock
-#: dh:74
+#: dh:78
msgid "Prints commands that would run for a given sequence, but does not run them."
msgstr ""
#. type: textblock
-#: dh:78
+#: dh:82
msgid ""
"All other options passed to B<dh> are passed on to each command it "
"runs. This can be used to set an option like B<-v> or B<-X> or B<-N>, as "
msgstr ""
#. type: textblock
-#: dh:82
+#: dh:86
msgid ""
"In the above options, I<cmd> can be a full name of a debhelper command, or a "
"substring. It'll first search for a command in the sequence exactly matching "
msgstr ""
#. type: =head1
-#: dh:113 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:117 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr ""
#. type: textblock
-#: dh:115
+#: dh:119
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
msgstr ""
#. type: verbatim
-#: dh:118
+#: dh:122
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
msgstr ""
#. type: textblock
-#: dh:120
+#: dh:124
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
msgstr ""
#. type: verbatim
-#: dh:123 dh:130 dh:144 dh:157
+#: dh:127 dh:134 dh:148 dh:161
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: verbatim
-#: dh:127
+#: dh:131
#, no-wrap
msgid ""
"Often you'll want to pass an option to a specific debhelper command. The\n"
msgstr ""
#. type: verbatim
-#: dh:134
+#: dh:138
#, no-wrap
msgid ""
"\toverride_dh_strip:\n"
msgstr ""
#. type: verbatim
-#: dh:137
+#: dh:141
#, no-wrap
msgid ""
"\toverride_dh_installdocs:\n"
msgstr ""
#. type: textblock
-#: dh:140
+#: dh:144
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
msgstr ""
#. type: verbatim
-#: dh:148
+#: dh:152
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
msgstr ""
#. type: verbatim
-#: dh:151
+#: dh:155
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
msgstr ""
#. type: textblock
-#: dh:154
+#: dh:158
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
msgstr ""
#. type: verbatim
-#: dh:161
+#: dh:165
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
msgstr ""
#. type: textblock
-#: dh:165
+#: dh:169
msgid ""
-"If your package is a Python package, B<dh> will use B<dh_pysupport> by "
-"default. This is how to use B<dh_pycentral> instead."
+"Python tools are not run by dh by default, due to the continual change in "
+"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"Here is how to use B<dh_python2>."
msgstr ""
#. type: verbatim
-#: dh:168
+#: dh:173
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t%:\n"
-"\t\tdh $@ --with python-central\n"
+"\t\tdh $@ --with python2\n"
"\n"
msgstr ""
#. type: textblock
-#: dh:172
+#: dh:177
msgid ""
"If your package uses autotools and you want to freshen F<config.sub> and "
"F<config.guess> with newer versions from the B<autotools-dev> package at "
msgstr ""
#. type: verbatim
-#: dh:177
+#: dh:182
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:181
+#: dh:186
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
msgstr ""
#. type: verbatim
-#: dh:185
+#: dh:190
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: verbatim
-#: dh:189
+#: dh:194
#, no-wrap
msgid ""
"To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
msgstr ""
#. type: verbatim
-#: dh:192
+#: dh:197
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:196
+#: dh:201
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
msgstr ""
#. type: verbatim
-#: dh:200
+#: dh:205
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:204
+#: dh:209
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
msgstr ""
#. type: verbatim
-#: dh:207
+#: dh:212
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:211
+#: dh:216
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
msgstr ""
#. type: verbatim
-#: dh:214
+#: dh:219
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:218
+#: dh:223
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
msgstr ""
#. type: verbatim
-#: dh:221 dh:232 dh:249
+#: dh:226 dh:237 dh:254
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: verbatim
-#: dh:225
+#: dh:230
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
msgstr ""
#. type: textblock
-#: dh:228
+#: dh:233
msgid ""
"Sometimes, you may need to make an override target only run commands when a "
"particular package is being built. This can be accomplished using "
msgstr ""
#. type: verbatim
-#: dh:236
+#: dh:241
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
msgstr ""
#. type: textblock
-#: dh:242
+#: dh:247
msgid ""
"Finally, remember that you are not limited to using override targets in the "
"rules file when using B<dh>. You can also explicitly define any of the "
msgstr ""
#. type: verbatim
-#: dh:253
+#: dh:258
#, no-wrap
msgid ""
"\tbuild-indep:\n"
msgstr ""
#. type: textblock
-#: dh:258
+#: dh:263
msgid ""
"Note that in the example above, dh will arrange for \"debian/rules build\" "
"to call your build-indep and build-arch targets. You do not need to "
-"explicitly define the dependencies in the rules file when using dh with "
-"compatability level v9. This example would be more complicated with earlier "
-"compatability levels."
+"explicitly define those dependencies in the rules file when using dh with "
+"compatibility level v9. This example would be more complicated with earlier "
+"compatibility levels."
msgstr ""
#. type: =head1
-#: dh:264
+#: dh:269
msgid "INTERNALS"
msgstr ""
#. type: textblock
-#: dh:266
+#: dh:271
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
msgstr ""
#. type: textblock
-#: dh:268
+#: dh:273
msgid ""
"Each debhelper command will record when it's successfully run in "
"F<debian/package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can "
msgstr ""
#. type: textblock
-#: dh:273
+#: dh:278
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
msgstr ""
#. type: textblock
-#: dh:278
+#: dh:283
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:281
-msgid ""
-"B<dh> sets environment variables listed by B<dpkg-buildflags>, unless they "
-"are already set. It supports DEB_BUILD_OPTIONS=noopt too."
-msgstr ""
-
-#. type: textblock
-#: dh:284
+#: dh:286
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
msgstr ""
#. type: textblock
-#: dh:874 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:60 dh_builddeb:93 dh_clean:141 dh_compress:206 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:282 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:68 dh_installlogrotate:52 dh_installman:260 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
+#: dh:868 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144 dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:260 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
msgid "L<debhelper(7)>"
msgstr ""
#. type: textblock
-#: dh:876 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:95 dh_clean:143 dh_compress:208 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:284 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
+#: dh:870 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127 dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
msgid "This program is a part of debhelper."
msgstr ""
msgid ""
"Note that this is not the same as the B<--sourcedirectory> option used by "
"the B<dh_auto_>I<*> commands. You rarely need to use this option, since "
-"B<dh_install> automatically looks for files in F<debian/tmp> in debhelper"
-msgstr ""
-
-#. type: textblock
-#: dh_install:89
-msgid "compatibility level 7 and above."
+"B<dh_install> automatically looks for files in F<debian/tmp> in debhelper "
+"compatibility level 7 and above."
msgstr ""
#. type: =item
-#: dh_install:91
+#: dh_install:90
msgid "B<--autodest>"
msgstr ""
#. type: textblock
-#: dh_install:93
+#: dh_install:92
msgid ""
"Guess as the destination directory to install things to. If this is "
"specified, you should not list destination directories in "
msgstr ""
#. type: textblock
-#: dh_install:98
+#: dh_install:97
msgid ""
"Strip off F<debian/tmp> (or the sourcedir if one is given) from the front of "
"the filename, if it is present, and install into the dirname of the "
msgstr ""
#. type: textblock
-#: dh_install:104
+#: dh_install:103
msgid ""
"Note that if you list exactly one filename or wildcard-pattern on a line by "
"itself in a F<debian/package.install> file, with no explicit destination, "
msgstr ""
#. type: =item
-#: dh_install:109
+#: dh_install:108
msgid "I<file> ... I<dest>"
msgstr ""
#. type: textblock
-#: dh_install:111
+#: dh_install:110
msgid ""
"Lists files (or directories) to install and where to install them to. The "
"files will be installed into the first package F<dh_install> acts on."
msgstr ""
#. type: =head1
-#: dh_install:253
+#: dh_install:252
msgid "EXAMPLE"
msgstr ""
#. type: textblock
-#: dh_install:255
+#: dh_install:254
msgid ""
"Suppose your package's upstream F<Makefile> installs a binary, a man page, "
"and a library into appropriate subdirectories of F<debian/tmp>. You want to "
msgstr ""
#. type: verbatim
-#: dh_install:261
+#: dh_install:260
#, no-wrap
msgid ""
" usr/bin\n"
msgstr ""
#. type: textblock
-#: dh_install:264
+#: dh_install:263
msgid "While F<debian/libfoo.install> contains:"
msgstr ""
#. type: verbatim
-#: dh_install:266
+#: dh_install:265
#, no-wrap
msgid ""
" usr/lib/libfoo*.so.*\n"
msgstr ""
#. type: textblock
-#: dh_install:268
+#: dh_install:267
msgid ""
"If you want a libfoo-dev package too, F<debian/libfoo-dev.install> might "
"contain:"
msgstr ""
#. type: verbatim
-#: dh_install:270
+#: dh_install:269
#, no-wrap
msgid ""
" usr/include\n"
msgstr ""
#. type: =head1
-#: dh_install:274
+#: dh_install:273
msgid "LIMITATIONS"
msgstr ""
#. type: verbatim
-#: dh_install:276
+#: dh_install:275
#, no-wrap
msgid ""
"B<dh_install> cannot rename files or directories, it can only install them\n"
msgstr ""
#. type: =item
-#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 dh_installlogrotate:26 dh_installmodules:52 dh_installpam:35 dh_installppp:39 dh_installudev:39
+#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52 dh_installpam:35 dh_installppp:39 dh_installudev:39
msgid "B<--name=>I<name>"
msgstr ""
"subdirectories of F<etc/logcheck/> in package build directories."
msgstr ""
+#. type: textblock
+#: dh_installlogcheck:48
+msgid ""
+"Look for files named F<debian/package.name.logcheck.*> and install them into "
+"the corresponding subdirectories of F<etc/logcheck/>, but use the specified "
+"name instead of that of the package."
+msgstr ""
+
#. type: verbatim
-#: dh_installlogcheck:70
+#: dh_installlogcheck:80
#, no-wrap
msgid ""
"This program is a part of debhelper.\n"
msgstr ""
#. type: textblock
-#: dh_installlogcheck:74
+#: dh_installlogcheck:84
msgid "Jon Middleton <jjm@debian.org>"
msgstr ""
msgid ""
"By default, the shlibs file generated by this program does not make packages "
"depend on any particular version of the package containing the shared "
-"library. It may be necessary for you to add some version dependancy "
+"library. It may be necessary for you to add some version dependency "
"information to the shlibs file. If B<-V> is specified with no dependency "
"information, the current upstream version of the package is plugged into a "
"dependency that looks like \"I<packagename> B<(E<gt>>= "
#. type: textblock
#: dh_python:19
msgid ""
-"Note: This program is deprecated. You should use B<dh_pysupport> or "
-"B<dh_pycentral> instead. This program will do nothing if F<debian/pycompat> "
-"or a B<Python-Version> F<control> file field exists."
+"Note: This program is deprecated. You should use B<dh_python2> instead. "
+"This program will do nothing if F<debian/pycompat> or a B<Python-Version> "
+"F<control> file field exists."
msgstr ""
#. type: textblock
projects / debhelper.git / blobdiff