%% Do not edit this file; it is auto-generated from LSR http://lsr.dsi.unimi.it
%% This file is in the public domain.
-\version "2.11.62"
+\version "2.13.1"
\header {
lsrtags = "rhythms"
+%% Translation of GIT committish: 5c26e815f2ed54e6c4d022bac10dcc87a9916a29
+ texidoces = "
+ Son posibles tanto los corchetes rectos sobre notas sueltas como
+extremos de barra sueltos en figuras unidas, con una combinación de
+@code{stemLeftBeamCount}, @code{stemRightBeamCount} e indicadores de
+barra @code{[ ]} emparejados.
+
+Para corchetes rectos que apunten a la derecha sobre notas sueltas,
+use indicadores de barra emparejados @code{[ ]} y establezca
+@code{stemLeftBeamCount} a cero (véase el ejemplo 1).
+
+Para corchetes rectos que apunten a la izquierda, establezca en su
+lugar @code{stemRightBeamCount} (ejemplo 2).
+
+Para extremos sueltos que apunten a la derecha al final de un conjunto
+de notas unidas, establezca @code{stemRightBeamCount} a un valor
+positivo. Y para extremos sueltos que apunten a la izquierda al
+principio de un conjunto de notas unidas, establezca
+@code{stemLeftBeamCount} en su lugar (ejemplo 3).
+
+A veces, para una nota suelta rodeada de silencios tiene sentido que
+lleve los dos extremos sueltos del corchete plano, apuntando a derecha
+e izquierda. Hágalo solamente con indicadores de barra emparejados
+@code{[ ]} (ejemplo 4).
+
+(Observe que @code{\\set stemLeftBeamCount} siempre equivale a
+@code{\\once \\set}. En otras palabras, los ajustes de la cantidad de
+barras no se recuerdan, y por ello el par de corchetes planos
+aplicados a la nota Do semicorchea @code{c'16 [ ]} del último ejemplo
+no tiene nada que ver con el @code{\\set} de dos notas por detrás.)
+
+"
+ doctitlees = "Corchetes rectos y extremos de barra sueltos"
+
+
+%% Translation of GIT committish: 0364058d18eb91836302a567c18289209d6e9706
+ texidocde = "
+Gerade Fähnchen an einzelnen Noten und überstehende Balkenenden bei
+bebalkten Notengruppen sind möglich mit einer Kombination aus
+@code{stemLeftBeamCount}, @code{stemRightBeamCount} und Paaren von
+@code{[]}-Balkenbegrenzungen.
+
+Für gerade Fähnchen, die nach rechts zeigen, kann @code{[]} eingesetzt
+werden und @code{stemLeftBeamCount} auf Null gesetzt werden (wie
+Bsp. 1).
+
+Für gerade Fähnchen, die nach links zeigen, muss @code{stemRightBeamCount}
+eingesetzt werden (Bsp. 2).
+
+Für überstehende Balkenenden nach rechts muss @code{stemRightBeamCount}
+auf einen positiven Wert gesetzt werden, für Balkenenden, die nach links
+zeigen benutzt man @code{stemLeftBeamCount} (Bsp. 3).
+
+Manchmal können einzelne Noten, die von Pausen umgeben sind, auch Balkenenden
+in beide Richtungen tragen. Das geschieht mit @code{[]}-Klammern (Bsp. 4).
+
+(@code{\\set stemLeftBeamCount} entspricht immer dem Befehl
+@code{\\once \\set}. Anders gesagt müssen die Einstellungen immer wieder
+wiederholt werden und die Fähnchen des letzten Sechszehntels im letzten
+Beispiel haben nichts mit dem @code{\\set}-Befehl zwei Noten vorher zu tun.)
+
+"
+ doctitlede = "Gerade Fähnchen und überstehende Balkenenden"
+
texidoc = "
Flat flags on lone notes and beam nibs at the ends of beamed figures
are both possible with a combination of @code{stemLeftBeamCount},
-@code{stemRightBeamCount} and paired @code{[ ]} beam indicators.
+@code{stemRightBeamCount} and paired @code{[]} beam indicators.
-For right-pointing flat flags on lone notes, use paired @code{[ ]} beam
+For right-pointing flat flags on lone notes, use paired @code{[]} beam
indicators and set @code{stemLeftBeamCount} to zero (see Example 1).
Sometimes it may make sense for a lone note surrounded by rests to
carry both a left- and right-pointing flat flag. Do this with paired
-@code{[ ]} beam indicators alone (Example 4).
+@code{[]} beam indicators alone (Example 4).
-(Note that @code{\\set stemLeftBeamCount}is always equivalent to
-@code{\\once \\set}. In other words, the beam count settings aren't
-\"sticky\", so the pair of flat flags attached to the lone @code{c'16
-[ ]} in the last example have nothing to do with the @code{\\set} two
-notes prior.)
+(Note that @code{\\set stemLeftBeamCount} is always equivalent to
+@code{\\once \\set}. In other words, the beam count settings are not
+\"sticky\", so the pair of flat flags attached to the lone
+@code{c'16[]} in the last example have nothing to do with the
+@code{\\set} two notes prior.)
} % begin verbatim
\score {
-<<
-% Example 1
-\new RhythmicStaff {
- \set stemLeftBeamCount = #0
- c'16 [ ]
- r8.
-}
-
-% Example 2
-\new RhythmicStaff {
- r8.
- \set stemRightBeamCount = #0
- c'16 [ ]
+ <<
+ % Example 1
+ \new RhythmicStaff {
+ \set stemLeftBeamCount = #0
+ c16[]
+ r8.
+ }
+
+ % Example 2
+ \new RhythmicStaff {
+ r8.
+ \set stemRightBeamCount = #0
+ c16[]
+ }
+
+ % Example 3
+ \new RhythmicStaff {
+ c16 c
+ \set stemRightBeamCount = #2
+ c16 r r
+ \set stemLeftBeamCount = #2
+ c16 c c
+ }
+
+ % Example 4
+ \new RhythmicStaff {
+ c16 c
+ \set stemRightBeamCount = #2
+ c16 r
+ c16[]
+ r16
+ \set stemLeftBeamCount = #2
+ c16 c
+ }
+ >>
}
-% Example 3
-\new RhythmicStaff {
- c'16
- c'16
- \set stemRightBeamCount = #2
- c'16
- r16
- r16
- \set stemLeftBeamCount = #2
- c'16
- c'16
- c'16
-}
-
-% Example 4
-\new RhythmicStaff {
- c'16
- c'16
- \set stemRightBeamCount = #2
- c'16
- r16
- c'16 [ ]
- r16
- \set stemLeftBeamCount = #2
- c'16
- c'16
-}
->>
-}