If you want to use single color LED's you should use the [LED Matrix Subsystem](feature_led_matrix.md) instead.
## Driver configuration
-
+---
### IS31FL3731
There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
-### IS31FL3733
+---
+### IS31FL3733/IS31FL3737
+
+!> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`.
There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
-From this point forward the configuration is the same for all the drivers.
+---
+
+### WS2812 (AVR only)
+
+There is basic support for addressable RGB matrix lighting with a WS2811/WS2812{a,b,c} addressable LED strand. To enable it, add this to your `rules.mk`:
```C
-const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+RGB_MATRIX_ENABLE = WS2812
+```
+
+Configure the hardware via your `config.h`:
+
+```C
+// The pin connected to the data pin of the LEDs
+#define RGB_DI_PIN D7
+// The number of LEDs connected
+#define DRIVER_LED_TOTAL 70
+```
+
+---
+
+From this point forward the configuration is the same for all the drivers. The struct rgb_led array tells the system for each led, what key electrical matrix it represents, what the physical position is on the board, and if the led is for a modifier key or not. Here is a brief example:
+
+```C
+rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
/* {row | col << 4}
* | {x=0..224, y=0..64}
- * | | modifier
+ * | | flags
* | | | */
{{0|(0<<4)}, {20.36*0, 21.33*0}, 1},
- {{0|(1<<4)}, {20.36*1, 21.33*0}, 1},
+ {{0|(1<<4)}, {20.36*1, 21.33*0}, 4},
....
}
```
-The format for the matrix position used in this array is `{row | (col << 4)}`. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64. The easiest way to calculate these positions is:
+The first part, `{row | col << 4}`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `{x=0..224, y=0..64}` represents the LED's physical position on the keyboard. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64 as the effects are based on this range. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents x, y coordinate 0, 0 and the bottom right of your keyboard represents 224, 64. Using this as a basis, you can use the following formula to calculate the physical position:
```C
-x = 224 / ( NUMBER_OF_COLS - 1 ) * ROW_POSITION
-y = 64 / (NUMBER_OF_ROWS - 1 ) * COL_POSITION
+x = 224 / (NUMBER_OF_COLS - 1) * COL_POSITION
+y = 64 / (NUMBER_OF_ROWS - 1) * ROW_POSITION
```
-Where all variables are decimels/floats.
+Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout.
+
+`flags` is a bitmask, whether or not a certain LEDs is of a certain type. It is recommended that LEDs are set to only 1 type.
-`modifier` is a boolean, whether or not a certain key is considered a modifier (used in some effects).
+## Flags
+
+|Define |Description |
+|------------------------------------|-------------------------------------------|
+|`#define HAS_FLAGS(bits, flags)` |Returns true if `bits` has all `flags` set.|
+|`#define HAS_ANY_FLAGS(bits, flags)`|Returns true if `bits` has any `flags` set.|
+|`#define LED_FLAG_NONE 0x00` |If thes LED has no flags. |
+|`#define LED_FLAG_ALL 0xFF` |If thes LED has all flags. |
+|`#define LED_FLAG_MODIFIER 0x01` |If the Key for this LED is a modifier. |
+|`#define LED_FLAG_UNDERGLOW 0x02` |If the LED is for underglow. |
+|`#define LED_FLAG_KEYLIGHT 0x04` |If the LED is for key backlight. |
## Keycodes
RGB_MATRIX_GRADIENT_UP_DOWN, // Static gradient top to bottom, speed controls how much gradient changes
RGB_MATRIX_BREATHING, // Single hue brightness cycling animation
RGB_MATRIX_CYCLE_ALL, // Full keyboard solid hue cycling through full gradient
- RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right
+ RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right
RGB_MATRIX_CYCLE_UP_DOWN, // Full gradient scrolling top to bottom
RGB_MATRIX_RAINBOW_MOVING_CHEVRON, // Full gradent Chevron shapped scrolling left to right
RGB_MATRIX_DUAL_BEACON, // Full gradient spinning around center of keyboard
#if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES)
RGB_MATRIX_SOLID_REACTIVE_SIMPLE, // Pulses keys hit to hue & value then fades value out
RGB_MATRIX_SOLID_REACTIVE, // Static single hue, pulses keys hit to shifted hue then fades to current hue
+ RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out
+ RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out
+ RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out
+ RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out
+ RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out
+ RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out
RGB_MATRIX_SPLASH, // Full gradient & value pulse away from a single key hit then fades value out
RGB_MATRIX_MULTISPLASH, // Full gradient & value pulse away from multiple key hits then fades value out
RGB_MATRIX_SOLID_SPLASH, // Hue & value pulse away from a single key hit then fades value out
RGB_MATRIX_EFFECT_MAX
};
```
-
+
You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`:
-|Define |Description |
-|---------------------------------------------------|--------------------------------------------|
-|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` |
-|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` |
-|`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` |
-|`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` |
-|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` |
-|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` |
-|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|
-|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` |
-|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` |
-|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` |
-|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` |
-|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS` |
-|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` |
-|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE` |Disables `RGB_MATRIX_SOLID_REACTIVE` |
-|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLEE`|
-|`#define DISABLE_RGB_MATRIX_SPLASH` |Disables `RGB_MATRIX_SPLASH` |
-|`#define DISABLE_RGB_MATRIX_MULTISPLASH` |Disables `RGB_MATRIX_MULTISPLASH` |
-|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH` |Disables `RGB_MATRIX_SOLID_SPLASH` |
-|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH` |Disables `RGB_MATRIX_SOLID_MULTISPLASH` |
-
-
-## Custom layer effects
-
-Custom layer effects can be done by defining this in your `<keyboard>.c`:
+|Define |Description |
+|-------------------------------------------------------|-----------------------------------------------|
+|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` |
+|`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` |
+|`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` |
+|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` |
+|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON` |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON` |
+|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` |
+|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` |
+|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS` |
+|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE` |Disables `RGB_MATRIX_SOLID_REACTIVE` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE` |Disables `RGB_MATRIX_SOLID_REACTIVE_WIDE` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS` |Disables `RGB_MATRIX_SOLID_REACTIVE_CROSS` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`|
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS` |Disables `RGB_MATRIX_SOLID_REACTIVE_NEXUS` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
+|`#define DISABLE_RGB_MATRIX_SPLASH` |Disables `RGB_MATRIX_SPLASH` |
+|`#define DISABLE_RGB_MATRIX_MULTISPLASH` |Disables `RGB_MATRIX_MULTISPLASH` |
+|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH` |Disables `RGB_MATRIX_SOLID_SPLASH` |
+|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH` |Disables `RGB_MATRIX_SOLID_MULTISPLASH` |
+
+
+## Custom RGB Matrix Effects
+
+By setting `RGB_MATRIX_CUSTOM_USER` (and/or `RGB_MATRIX_CUSTOM_KB`) in `rule.mk`, new effects can be defined directly from userspace, without having to edit any QMK core files.
+
+To declare new effects, create a new `rgb_matrix_user/kb.inc` that looks something like this:
+
+`rgb_matrix_user.inc` should go in the root of the keymap directory.
+`rgb_matrix_kb.inc` should go in the root of the keyboard directory.
```C
-void rgb_matrix_indicators_kb(void) {
- rgb_matrix_set_color(index, red, green, blue);
+// !!! DO NOT ADD #pragma once !!! //
+
+// Step 1.
+// Declare custom effects using the RGB_MATRIX_EFFECT macro
+// (note the lack of semicolon after the macro!)
+RGB_MATRIX_EFFECT(my_cool_effect)
+RGB_MATRIX_EFFECT(my_cool_effect2)
+
+// Step 2.
+// Define effects inside the `RGB_MATRIX_CUSTOM_EFFECT_IMPLS` ifdef block
+#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
+
+// e.g: A simple effect, self-contained within a single method
+static bool my_cool_effect(effect_params_t* params) {
+ RGB_MATRIX_USE_LIMITS(led_min, led_max);
+ for (uint8_t i = led_min; i < led_max; i++) {
+ rgb_matrix_set_color(i, 0xff, 0xff, 0x00);
+ }
+ return led_max < DRIVER_LED_TOTAL;
+}
+
+// e.g: A more complex effect, relying on external methods and state, with
+// dedicated init and run methods
+static uint8_t some_global_state;
+static void my_cool_effect2_complex_init(effect_params_t* params) {
+ some_global_state = 1;
+}
+static bool my_cool_effect2_complex_run(effect_params_t* params) {
+ RGB_MATRIX_USE_LIMITS(led_min, led_max);
+ for (uint8_t i = led_min; i < led_max; i++) {
+ rgb_matrix_set_color(i, 0xff, some_global_state++, 0xff);
+ }
+
+ return led_max < DRIVER_LED_TOTAL;
+}
+static bool my_cool_effect2(effect_params_t* params) {
+ if (params->init) my_cool_effect2_complex_init(params);
+ return my_cool_effect2_complex_run(params);
}
+
+#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS
```
-A similar function works in the keymap as `rgb_matrix_indicators_user`.
+For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix_animation/`
+
+
+## Colors
+
+These are shorthands to popular colors. The `RGB` ones can be passed to the `setrgb` functions, while the `HSV` ones to the `sethsv` functions.
+
+|RGB |HSV |
+|-------------------|-------------------|
+|`RGB_WHITE` |`HSV_WHITE` |
+|`RGB_RED` |`HSV_RED` |
+|`RGB_CORAL` |`HSV_CORAL` |
+|`RGB_ORANGE` |`HSV_ORANGE` |
+|`RGB_GOLDENROD` |`HSV_GOLDENROD` |
+|`RGB_GOLD` |`HSV_GOLD` |
+|`RGB_YELLOW` |`HSV_YELLOW` |
+|`RGB_CHARTREUSE` |`HSV_CHARTREUSE` |
+|`RGB_GREEN` |`HSV_GREEN` |
+|`RGB_SPRINGGREEN` |`HSV_SPRINGGREEN` |
+|`RGB_TURQUOISE` |`HSV_TURQUOISE` |
+|`RGB_TEAL` |`HSV_TEAL` |
+|`RGB_CYAN` |`HSV_CYAN` |
+|`RGB_AZURE` |`HSV_AZURE` |
+|`RGB_BLUE` |`HSV_BLUE` |
+|`RGB_PURPLE` |`HSV_PURPLE` |
+|`RGB_MAGENTA` |`HSV_MAGENTA` |
+|`RGB_PINK` |`HSV_PINK` |
+
+These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h). Feel free to add to this list!
+
## Additional `config.h` Options
The EEPROM for it is currently shared with the RGBLIGHT system (it's generally assumed only one RGB would be used at a time), but could be configured to use its own 32bit address with:
```C
-#define EECONFIG_RGB_MATRIX (uint32_t *)16
+#define EECONFIG_RGB_MATRIX (uint32_t *)28
```
-Where `16` is an unused index from `eeconfig.h`.
+Where `28` is an unused index from `eeconfig.h`.
## Suspended state