=cut
use strict;
+use File::Find;
use Debian::Debhelper::Dh_Lib;
=head1 SYNOPSIS
-B<dh_install> [B<-X>I<item>] [S<I<debhelper options>>] [S<I<file [...] dest>>]
+B<dh_install> [B<-X>I<item>] [B<--autodest>] [B<--sourcedir=>I<dir>] [S<I<debhelper options>>] [S<I<file [...] dest>>]
=head1 DESCRIPTION
the old dh_movefiles command.
Files named debian/package.install list the files to install into each
-package and where they should be installed to. The format is a set of
-lines, where each line lists a file or files to install, and at the end of
-the line tells the directory it should be installed in. The name of the
+package and the directory they should be installed to. The format is a set
+of lines, where each line lists a file or files to install, and at the end
+of the line tells the directory it should be installed in. The name of the
files (or directories) to install should be given relative to the current
directory, while the installation directory is given relative to the
package build directory. You may use wildcards in the names of the files to
This program may be used in one of two ways. If you just have a file or two
that the upstream Makefile does not install for you, you can run dh_install
on them to move them into place. On the other hand, maybe you have a large
-package that builds multiple binary packages. You can use the upstream Makefile
-to install it all into debian/tmp, and then use dh_install to copy
+package that builds multiple binary packages. You can use the upstream
+Makefile to install it all into debian/tmp, and then use dh_install to copy
directories and files from there into the proper package build directories.
=head1 OPTIONS
debian/package.install files or on the command line. Instead, dh_install
will guess as follows:
-Strip off debian/tmp from the front of the filename, of it is present, and
-install into the dirname of the filename. So if the filename is
-debian/tmp/usr/bin, then that directory will be copied to
-debian/package/usr/. If the filename is debian/tmp/etc/passwd, it will be
-copied to debian/package/etc/.
+Strip off debian/tmp (or the sourcedir if one is given) from the front of
+the filename, if it is present, and install into the dirname of the
+filename. So if the filename is debian/tmp/usr/bin, then that directory
+will be copied to debian/package/usr/. If the filename is
+debian/tmp/etc/passwd, it will be copied to debian/package/etc/.
-Note that if you list only a filename on a line by itself in a
+Note that if you list exactly one filename or wildcard-pattern on a line by
+itself in a
debian/package.install file, with no explicit destination, then dh_install
will automatically guess the destination even if this flag is not set.
+=item B<--list-missing>
+
+This option makes dh_install keep track of the files it installs, and then at
+the end, compare that list with the files in the source directory. If any of
+the files (and symlinks) in the source directory were not installed to
+somewhere, it will warn on stderr about that.
+
+This may be useful if you have a large package and want to make sure that
+you don't miss installing newly added files in new upstream releases.
+
+Note that files that are excluded from being moved via the -X option are not
+warned about.
+
+=item B<--fail-missing>
+
+This option is like --list-missing, except if a file was missed, it will
+not only list the missing files, but also fail with a nonzero exit code.
+
+=item B<--sourcedir=dir>
+
+Makes all source files be found under dir. If this is specified, it is
+akin to all the source filenames having "dir/" prepended to them.
+
+To make dh_install behave like the old dh_movefiles, move your
+package.files file to package.install and call dh_install with
+"--sourcedir=debian/tmp" appended to the command. This will
+approximate dh_movefiles behaviour, except it will copy files instead
+of moving them.
+
=item I<file [...] dest>
Lists files (or directories) to install and where to install them to.
init();
-my $ret=0;
+my @installed;
+
+my $srcdir = '.';
+$srcdir = $dh{SOURCEDIR}."/" if defined $dh{SOURCEDIR};
foreach my $package (@{$dh{DOPACKAGES}}) {
my $tmp=tmpdir($package);
# Support for -X flag.
my $exclude = '';
if ($dh{EXCLUDE_FIND}) {
- $exclude = ' -and ! \( '.$dh{EXCLUDE_FIND}.' \)';
+ $exclude = '! \( '.$dh{EXCLUDE_FIND}.' \)';
}
foreach my $set (@install) {
my $dest;
+ my $tmpdest=0;
if (! defined $dh{AUTODEST} && @$set > 1) {
$dest=pop @$set;
}
-
- foreach my $src (map { glob } @$set) { # glob now
+ if (! compat(4)) { # check added in v5
+ # glob now, relative to srcdir
+ if (! map { glob "$srcdir/$_" } @$set) {
+ error("missing files (@$set), aborting");
+ }
+ }
+ foreach my $src (map { glob "$srcdir/$_" } @$set) {
next if excludefile($src);
if (! defined $dest) {
# Guess at destination directory.
$dest=$src;
- $dest=~s/^(.*\/)?debian\/tmp//;
+ my $strip=$srcdir;
+ if ($strip eq '.') {
+ $strip = "debian/tmp";
+ }
+ $dest=~s/^(.*\/)?\Q$strip\E//;
$dest=dirname($dest);
+ $tmpdest=1;
}
# Make sure the destination directory exists.
doit("install","-d","$tmp/$dest");
}
+ # Keep track of what's installed.
+ if ($dh{LIST_MISSING} || $dh{FAIL_MISSING}) {
+ # Kill any extra slashes. Makes the
+ # @installed stuff more robust.
+ $src=~y:/:/:s;
+ $src=~s:/+$::;
+ $src=~s:^(\./)*::;
+ push @installed, "\Q$src\E\/.*|\Q$src\E";
+ }
+
if (-d $src && $exclude) {
my ($dir_basename) = basename($src);
# Pity there's no cp --exclude ..
my $pwd=`pwd`;
chomp $pwd;
- complex_doit("cd $src/.. && find $dir_basename -type f$exclude -exec cp --parents -dp {} $pwd/$tmp/$dest/ \\;");
+ complex_doit("cd $src/.. && find $dir_basename $exclude \\( -type f -or -type l \\) -exec cp --parents -dp {} $pwd/$tmp/$dest/ \\;");
+ # cp is annoying so I need a separate pass
+ # just for empty directories
+ complex_doit("cd $src/.. && find $dir_basename $exclude \\( -type d -and -empty \\) -exec cp --parents -a {} $pwd/$tmp/$dest/ \\;");
}
else {
doit("cp", "-a", $src, "$tmp/$dest/");
}
+
+ if ($tmpdest) {
+ $dest=undef;
+ }
+ }
+ }
+}
+
+if ($dh{LIST_MISSING} || $dh{FAIL_MISSING}) {
+ # . as srcdir makes no sense, so this is a special case.
+ if ($srcdir eq '.') {
+ $srcdir='debian/tmp';
+ }
+
+ my @missing;
+ my $installed=join("|", @installed);
+ $installed=qr{^($installed)$};
+ find(sub {
+ -f || -l || return;
+ $_="$File::Find::dir/$_";
+ if (! /$installed/ && ! excludefile($_)) {
+ my $file=$_;
+ $file=~s/^\Q$srcdir\E\///;
+ push @missing, $file;
+ }
+ }, $srcdir);
+ if (@missing) {
+ warning "$_ exists in debian/tmp but is not installed to anywhere" foreach @missing;
+ if ($dh{FAIL_MISSING}) {
+ error("missing files, aborting");
}
}
}
+=head1 EXAMPLE
+
+Suppose your package's upstream Makefile installs a binary, a man page, and
+a library into appropriate subdirectories of debian/tmp. You want to put
+the library into package libfoo, and the rest into package foo. Your rules
+file will run "dh_install --sourcedir=debian/tmp". Make debian/foo.install
+contain:
+
+ usr/bin
+ usr/share/man/man1
+
+While debian/libfoo.install contains:
+
+ usr/lib/libfoo*.so.*
+
+If you want a libfoo-dev package too, debian/libfoo-dev.install might contain:
+
+ usr/include
+ usr/lib/libfoo*.so
+ usr/share/man/man3
+
+=head1 LIMITATIONS
+
+dh_install cannot rename files or directories, it can only install them
+with the names they already have into wherever you want in the package
+build tree.
+
=head1 SEE ALSO
-L<debhelper(1)>
+L<debhelper(7)>
This program is a part of debhelper.
projects / debhelper.git / blobdiff