=head1 SYNOPSIS
-B<dh> sequence [B<--until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] [B<--with> I<addon>] [S<I<debhelper options>>]
+B<dh> sequence [B<--with> I<addon>] [B<--until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] [S<I<debhelper options>>]
=head1 DESCRIPTION
in the sequence. The B<--until>, B<--before>, B<--after>, and B<--remaining>
options can override this behavior.
+If debian/rules contains a target with a name like "override_I<dh_command>",
+then when it gets to that command in the sequence, dh will run that
+target from the rules file, rather than running the actual command. The
+override target can then run the command with additional options, or run
+entirely different commands instead. (Note that to use this feature,
+you should Build-Depend on debhelper 7.2 or above.)
+
=head1 OPTIONS
=over 4
+=item B<--with> I<addon>
+
+Add the debhelper commands specified by the given addon to appropriate places
+in the sequence of commands that is run. This option can be repeated more
+than once, and is used when there is a third-party package that provides
+debhelper commands. See "SEQUENCE ADDONS" below for documentation about what
+such packages should do to be supported by --with.
+
=item B<--until> I<cmd>
Run commands in the sequence until and including I<cmd>, then stop.
Run all commands in the sequence that have yet to be run.
-=item B<--with> I<addon>
-
-Add the debhelper commands specified by the given addon to appropriate places
-in the sequence of commands that is run. This option can be repeated more
-than once, and is used when there is a third-party package that provides
-debhelper commands. See "SEQUENCE ADDONS" below for documentation about what
-such packages should do to be supported by --with.
-
=back
All other options passed to dh are passed on to each command it runs. This
%:
dh $@
-This is a simple rules file that is a good starting place for customisation.
-(It's also available in F</usr/share/doc/debhelper/examples/rules.simple>
-
+Often you'll want to pass an option to a specific debhelper command. The
+easy way to do with is by adding an override target for that command.
+
#!/usr/bin/make -f
+ %:
+ dh $@
- build: build-stamp
- dh build
- touch build-stamp
-
- clean:
- dh clean
-
- install: build install-stamp
- install-stamp:
- dh install
- touch install-stamp
-
- binary-arch: install
- dh binary-arch
-
- binary-indep: install
- dh binary-indep
-
- binary: binary-arch binary-indep
-
-Often you'll want to pass an option to ./configure. This uses dh to run all
-commands before L<dh_auto_configure(1)>, then runs that command by hand,
-and then finished up by running the rest of the sequence. You could also
-run ./configure by hand, instead of bothering with using dh_auto_configure.
-And if necessary, you can add commands to run automake, etc here too.
+ override_dh_strip:
+ dh_strip -Xfoo
+
+ override_dh_installdocs:
+ dh_installdocs README TODO
- build: build-stamp
- build-stamp:
- dh build --before configure
- dh_auto_configure -- --kitchen-sink=yes
- dh build --after configure
- touch build-stamp
+Sometimes the automated dh_auto_configure and dh_auto_build can't guess
+what to do for a strange package. Here's how to avoid running either
+and instead run your own commands.
-Here's how to skip two automated steps in a row (configure and build), and
-instead run the commands by hand.
+ #!/usr/bin/make -f
+ %:
+ dh $@
- build: build-stamp
- build-stamp:
- dh build --before configure
+ override_dh_auto_configure:
./mondoconfig
+
+ override_dh_auto_build:
make universe-explode-in-delight
- dh build --after build
- touch build-stamp
-Another common case is wanting to run some code manually after a particular
-debhelper command is run.
+Another common case is wanting to do something manually before or
+after a particular debhelper command is run.
- install: build install-stamp
- install-stamp:
- dh install --until dh_fixperms
- # dh_fixperms has run, now override it for one program
- chmod 4755 debian/foo/usr/bin/foo
- # and continue
- dh install --after dh_fixperms
- touch install-stamp
-
-It's also fine to run debhelper commands early. Just make sure that at
-least dh_prep is run from the sequence first, and be sure to use the
-B<--remaining> option to ensure that commands that normally come before
-those in the sequence are still run.
-
- install: build install-stamp
- install-stamp:
- dh install --until dh_prep
- dh_installdocs README TODO
- dh_installchangelogs Changes
- dh install --remaining
- touch install-stamp
+ #!/usr/bin/make -f
+ %:
+ dh $@
- binary-arch: install
- dh_strip -X foo
- dh binary-arch --remaining
+ override_dh_fixperms:
+ dh_fixperms
+ chmod 4755 debian/foo/usr/bin/foo
=cut
# Command already done for all packages.
next;
}
- elsif (! @exclude) {
- # Run command for all packages.
- run($sequence[$i], @options);
- }
- else {
- # Run command for only a subset of packages.
- run($sequence[$i], @options,
- map { "-N$_" } @exclude);
- }
+
+ run($sequence[$i], \@packages, \@exclude, @options);
}
sub run {
my $command=shift;
+ my @packages=@{shift()};
+ my @exclude=@{shift()};
my @options=@_;
+ # Check for override targets in debian/rules and
+ # run them instead of running the command directly.
+ my $override_command;
+ if (rules_explicit_target("override_".$command)) {
+ $override_command=$command;
+ # This passes the options through to commands called
+ # inside the target.
+ $ENV{DH_INTERNAL_OPTIONS}=join(" ", @options);
+ $command="debian/rules";
+ @options="override_".$override_command;
+ }
+ else {
+ # If some packages are excluded, add flags
+ # to prevent them from being acted on.
+ push @options, map { "-N$_" } @exclude;
+ }
+
# 3 space indent lines the command being run up under the
# sequence name after "dh ".
print " ".escape_shell($command, @options)."\n";
elsif ($ret) {
exit 1;
}
+
+ if (defined $override_command) {
+ delete $ENV{DH_INTERNAL_OPTIONS};
+ # Need to handle logging for overriden commands here,
+ # because the actual debhelper command may not have
+ # been run by the rules file target.
+ my %packages=map { $_ => 1 } @packages;
+ map { delete $packages{$_} } @exclude;
+ Debian::Debhelper::Dh_Lib::write_log($override_command, keys %packages);
+ }
}
}
close LOG;
}
+{
+my %targets;
+my $rules_parsed;
+
+sub rules_explicit_target {
+ # Checks if a specified target exists as an explicit target
+ # in debian/rules.
+ # Currently this is accomplished via a stupid makefile parser.
+ my $target=shift;
+
+ if (! $rules_parsed) {
+ open(IN, "<debian/rules") || warning("dh cannot read debian/rules: $!");
+ while (<IN>) {
+ if (/^([a-zA-Z_]+):/) {
+ $targets{$1}=1;
+ }
+ }
+ close IN;
+ }
+
+ return exists $targets{$target};
+}
+
+}
+
=head1 SEE ALSO
L<debhelper(7)>
projects / debhelper.git / blobdiff