=head1 SYNOPSIS
-B<dh> sequence [B<--with> I<addon>] [B<--until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] [S<I<debhelper options>>]
+B<dh> sequence [B<--with> I<addon>[,I<addon>,...]] [B<--list>] [B<--until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] [S<I<debhelper options>>]
=head1 DESCRIPTION
=over 4
-=item B<--with> I<addon>
+=item B<--with> I<addon>[,I<addon>,...]
Add the debhelper commands specified by the given addon to appropriate places
in the sequence of commands that is run. This option can be repeated more
-than once, and is used when there is a third-party package that provides
-debhelper commands. See "SEQUENCE ADDONS" below for documentation about what
-such packages should do to be supported by --with.
+than once, or multiple addons can be listed, separated by commas.
+This is used when there is a third-party package that provides
+debhelper commands. See the PROGRAMMING file for documentation about
+the sequence addon interface.
+
+=item B<--without> I<addon>
+
+The inverse of --with, disables using the given addon.
+
+=item B<--list>, B<-l>
+
+List all available addons.
=item B<--until> I<cmd>
ambiguity. If there are multiple substring matches, the last one in the
sequence will be used.
-=head1 SEQUENCE ADDONS
-
-When B<--with> I<addon> is used, dh loads the perl module
-Debian::Debhelper::Sequence::I<addon>. Two functions are provided to let
-the module add its commands to sequences:
-
-=over 4
-
-=item Debian::Debhelper::Dh_Lib::insert_before(existing_command, new_command)
-
-Insert I<new_command> in sequences before I<existing_command>.
-
-=item Debian::Debhelper::Dh_Lib::insert_after(existing_command, new_command)
-
-Insert I<new_command> in sequences after I<existing_command>.
-
-=item Debian::Debhelper::Dh_Lib::remove_command(existing_command)
-
-Remove I<existing_command> from the list of commands to run.
-
-=back
-
=cut
sub command_pos {
%:
dh --with python-central $@
+To patch your package using quilt, you can tell dh to use quilt's dh
+sequence addons like this:
+
+ #!/usr/bin/make -f
+ %:
+ dh --with quilt $@
+
+Here is an example of overriding where the dh_auto_* commands find
+the package's source, for a package where the source is located in a
+subdirectory. It also forces use of perl's Module::Build build system,
+which can be necessary if debhelper wrongly detects that the package
+uses MakeMaker.
+
+ #!/usr/bin/make -f
+ %:
+ dh --sourcedirectory=src --buildsystem=perl_build $@
+
=cut
# Stash this away before init modifies it.
my @ARGV_orig=@ARGV;
+# python-support is enabled by default, at least for now
+# (and comes first so python-central loads later and can disable it).
+unshift @ARGV, "--with=python-support";
+
+# Disable complaints about unknown options for both dh and the commands
+# it runs. This is done because dh accepts and passes on options that may
+# be specific to only some debhelper commands.
+$ENV{DH_IGNORE_UNKNOWN_OPTIONS}=1;
+
init(options => {
"until=s" => \$dh{UNTIL},
"after=s" => \$dh{AFTER},
"remaining" => \$dh{REMAINING},
"with=s" => sub {
my ($option,$value)=@_;
- push @{$dh{WITH}},$value;
+ push @{$dh{WITH}},split(",", $value);
+ },
+ "without=s" => sub {
+ my ($option,$value)=@_;
+ @{$dh{WITH}} = grep { $_ ne $value } @{$dh{WITH}};
},
+ "l" => \$dh{LIST},
+ "list" => \$dh{LIST},
});
inhibit_log();
+# If make is using a jobserver, but it is not available
+# to this process, clean out MAKEFLAGS. This avoids
+# ugly warnings when calling make.
+if (is_make_jobserver_unavailable()) {
+ clean_jobserver_makeflags();
+}
+
# Definitions of sequences.
my %sequences;
$sequences{build} = [qw{
dh_installcatalogs
dh_installcron
dh_installdebconf
- dh_installcatalogs
dh_installemacsen
dh_installifupdown
dh_installinfo
dh_gconf
dh_icons
dh_perl
- dh_scrollkeeper
dh_usrlocal
dh_link
}, @b];
$sequences{'binary-arch'} = [@{$sequences{binary}}];
-# --with python-support is enabled by default, at least for now
-unshift @{$dh{WITH}}, "python-support";
+# Additional command options
+my %command_opts;
# sequence addon interface
sub _insert {
}
}
+sub add_command {
+ my $command=shift;
+ my $sequence=shift;
+ unshift @{$sequences{$sequence}}, $command;
+}
+sub add_command_options {
+ my $command=shift;
+ push @{$command_opts{$command}}, @_;
+}
+sub remove_command_options {
+ my $command=shift;
+ if (@_) {
+ # Remove only specified options
+ if (my $opts = $command_opts{$command}) {
+ foreach my $opt (@_) {
+ $opts = [ grep { $_ ne $opt } @$opts ];
+ }
+ $command_opts{$command} = $opts;
+ }
+ }
+ else {
+ # Clear all additional options
+ delete $command_opts{$command};
+ }
+}
+
+if ($dh{LIST}) {
+ my %addons;
+
+ for my $inc (@INC) {
+ eval q{use File::Spec};
+ my $path = File::Spec->catdir($inc, "Debian/Debhelper/Sequence");
+ if (-d $path) {
+ for my $module_path (glob "$path/*.pm") {
+ my $name = basename($module_path);
+ $name =~ s/\.pm$//;
+ $name =~ s/_/-/g;
+ $addons{$name} = 1;
+ }
+ }
+ }
+
+ for my $name (sort keys %addons) {
+ print "$name\n";
+ }
+
+ exit 0;
+}
+
foreach my $addon (@{$dh{WITH}}) {
my $mod="Debian::Debhelper::Sequence::$addon";
$mod=~s/-/_/g;
eval "use $mod";
if ($@) {
- error("--with $addon not supported or failed to load module $mod");
+ error("unable to load addon $addon: $@");
}
}
while (@ARGV_orig) {
my $opt=shift @ARGV_orig;
next if $opt eq $sequence;
- if ($opt =~ /^--?(after|until|before|with)$/) {
+ if ($opt =~ /^--?(after|until|before|with|without)$/) {
shift @ARGV_orig;
next;
}
- elsif ($opt =~ /^--?(no-act|remaining|(after|until|before|with)=)/) {
+ elsif ($opt =~ /^--?(no-act|remaining|(after|until|before|with|without)=)/) {
next;
}
push @options, $opt;
$override_command=$command;
# This passes the options through to commands called
# inside the target.
- $ENV{DH_INTERNAL_OPTIONS}=join(" ", @options);
+ $ENV{DH_INTERNAL_OPTIONS}=join("\x1e", @options);
$command="debian/rules";
@options="override_".$override_command;
}
+ else {
+ # Pass additional command options if any
+ unshift @options, @{$command_opts{$command}} if exists $command_opts{$command};
+ }
# 3 space indent lines the command being run up under the
# sequence name after "dh ".
# Need to handle logging for overriden commands here,
# because the actual debhelper command may not have
# been run by the rules file target.
- my %packages=map { $_ => 1 } @packages;
- map { delete $packages{$_} } @exclude;
- write_log($override_command, keys %packages);
+ # (But avoid logging for dh_clean since it removes
+ # the log earlier.)
+ if ($override_command ne 'dh_clean') {
+ my %packages=map { $_ => 1 } @packages;
+ map { delete $packages{$_} } @exclude;
+ write_log($override_command, keys %packages);
+ }
}
}
}
projects / debhelper.git / blobdiff