target from the rules file, rather than running the actual command. The
override target can then run the command with additional options, or run
entirely different commands instead. (Note that to use this feature,
-you should Build-Depend on debhelper 7.2 or above.)
+you should Build-Depend on debhelper 7.0.50 or above.)
=head1 OPTIONS
Add the debhelper commands specified by the given addon to appropriate places
in the sequence of commands that is run. This option can be repeated more
than once, and is used when there is a third-party package that provides
-debhelper commands. See "SEQUENCE ADDONS" below for documentation about what
-such packages should do to be supported by --with.
+debhelper commands. See the PROGRAMMING file for documentation about
+the sequence addon interface.
+
+=item B<--without> I<addon>
+
+The inverse of --with, disables using the given addon.
=item B<--until> I<cmd>
ambiguity. If there are multiple substring matches, the last one in the
sequence will be used.
-=head1 SEQUENCE ADDONS
-
-When B<--with> I<addon> is used, dh loads the perl module
-Debian::Debhelper::Sequence::I<addon>. Two functions are provided to let
-the module add its commands to sequences:
-
-=over 4
-
-=item Debian::Debhelper::Dh_Lib::insert_before(existing_command, new_command)
-
-Insert I<new_command> in sequences before I<existing_command>.
-
-=item Debian::Debhelper::Dh_Lib::insert_after(existing_command, new_command)
-
-Insert I<new_command> in sequences after I<existing_command>.
-
-=item Debian::Debhelper::Dh_Lib::remove_command(existing_command)
-
-Remove I<existing_command> from the list of commands to run.
-
-=back
-
=cut
sub command_pos {
dh_fixperms
chmod 4755 debian/foo/usr/bin/foo
+If your package is a python package, dh will use dh_pysupport by
+default. This is how to use dh_pycentral instead.
+
+ #!/usr/bin/make -f
+ %:
+ dh --with python-central $@
+
=cut
# Stash this away before init modifies it.
my @ARGV_orig=@ARGV;
+# python-support is enabled by default, at least for now
+# (and comes first so python-central loads later and can disable it).
+unshift @ARGV, "--with=python-support";
+
init(options => {
"until=s" => \$dh{UNTIL},
"after=s" => \$dh{AFTER},
my ($option,$value)=@_;
push @{$dh{WITH}},$value;
},
+ "without=s" => sub {
+ my ($option,$value)=@_;
+ @{$dh{WITH}} = grep { $_ ne $value } @{$dh{WITH}};
+ },
});
inhibit_log();
dh_installudev
dh_installwm
dh_installxfonts
+ dh_bugfiles
dh_lintian
- dh_desktop
dh_gconf
dh_icons
dh_perl
}, @b];
$sequences{'binary-arch'} = [@{$sequences{binary}}];
-# --with python-support is enabled by default, at least for now
-unshift @{$dh{WITH}}, "python-support";
-
# sequence addon interface
sub _insert {
my $offset=shift;
error "specify a sequence to run";
}
my $sequence=shift;
-if (! exists $sequences{$sequence}) {
+if ($sequence eq 'debian/rules' ||
+ $sequence =~ /^override_dh_/) {
+ # make -B causes the rules file to be run as a target
+ # and support completly empty override targets
+ exit 0
+}
+elsif (! exists $sequences{$sequence}) {
error "Unknown sequence $sequence (choose from: ".
join(" ", sort keys %sequences).")";
}
while (@ARGV_orig) {
my $opt=shift @ARGV_orig;
next if $opt eq $sequence;
- if ($opt =~ /^--?(after|until|before|with)$/) {
+ if ($opt =~ /^--?(after|until|before|with|without)$/) {
shift @ARGV_orig;
next;
}
- elsif ($opt =~ /^--?(no-act|remaining|(after|until|before|with)=)/) {
+ elsif ($opt =~ /^--?(no-act|remaining|(after|until|before|with|without)=)/) {
next;
}
push @options, $opt;
my %logged;
my %startpoint;
foreach my $package (@packages) {
- my @log=loadlog($package);
+ my @log=load_log($package, \%logged);
if ($dh{AFTER}) {
# Run commands in the sequence that come after the
# specified command.
# no commands remain to run after it, communicating to
# future dh instances that the specified command should not
# be run again.
- writelog($package, $sequence[$startpoint{$package}-1]);
+ write_log($sequence[$startpoint{$package}-1], $package);
}
elsif ($dh{REMAINING}) {
# Start at the beginning so all remaining commands will get
my @exclude=@{shift()};
my @options=@_;
+ # If some packages are excluded, add flags
+ # to prevent them from being acted on.
+ push @options, map { "-N$_" } @exclude;
+
# Check for override targets in debian/rules and
# run them instead of running the command directly.
my $override_command;
$command="debian/rules";
@options="override_".$override_command;
}
- else {
- # If some packages are excluded, add flags
- # to prevent them from being acted on.
- push @options, map { "-N$_" } @exclude;
- }
# 3 space indent lines the command being run up under the
# sequence name after "dh ".
# been run by the rules file target.
my %packages=map { $_ => 1 } @packages;
map { delete $packages{$_} } @exclude;
- Debian::Debhelper::Dh_Lib::write_log($override_command, keys %packages);
+ write_log($override_command, keys %packages);
}
}
}
-sub loadlog {
- my $package=shift;
- my $ext=pkgext($package);
-
- my @log;
- open(LOG, "<", "debian/${ext}debhelper.log") || return;
- while (<LOG>) {
- chomp;
- push @log, $_;
- $logged{$package}{$_}=1;
- }
- close LOG;
- return @log;
-}
-
-sub writelog {
- my $package=shift;
- my $cmd=shift;
- my $ext=pkgext($package);
-
- open(LOG, ">>", "debian/${ext}debhelper.log") || error("failed to write to log");
- print LOG $cmd."\n";
- close LOG;
-}
-
{
my %targets;
my $rules_parsed;
if (! $rules_parsed) {
my $processing_targets = 0;
my $not_a_target = 0;
- open(MAKE, "make -Rrnpsf debian/rules debhelper-fail-me 2>/dev/null |");
+ open(MAKE, "LC_ALL=C make -Rrnpsf debian/rules debhelper-fail-me 2>/dev/null |");
while (<MAKE>) {
if ($processing_targets) {
if (/^# Not a target:/) {
projects / debhelper.git / blobdiff