-debhelper (7.0.9) UNRELEASED; urgency=low
+debhelper (7.2.0) UNRELEASED; urgency=low
+
+ * dh: debian/rules override targets can change what is run
+ for a specific debhelper command in a sequence.
+ (Thanks Modestas Vainius for the improved makefile parser.)
+ * dh: Redid all the examples to use override targets, since these
+ eliminate all annoying boilerplate and are much easier to understand
+ than the old method.
+ * Remove rules.simple example, there's no need to use explcit targets
+ with dh anymore.
+ * dh: Fix typo. Closes: #509754
+ * debhelper.pod: Fix typo. Closes: #510180
+ * dh_gconf: Support mandatory settings. Closes: #513923
+ * dh: Support debian/rules calling make with -B,
+ which is useful to avoid issues with phony implicit
+ rules (see bug #509756).
+ * Improve error messages when child commands fail.
+ * Depend on dpkg-dev 1.14.19, the first to support Package-Type
+ fields in dpkg-gencontrol.
+ * dh_gencontrol: No longer need to generate the udeb filename
+ when calling dpkg-gencontrol.
+ * dh_gencontrol: Do not need to tell dpkg-gencontol not to
+ include the Homepage field in udebs (fixed in dpkg-dev 1.14.17).
+
+ -- Joey Hess <joeyh@debian.org> Thu, 25 Dec 2008 16:26:36 -0500
+
+debhelper (7.1.1) experimental; urgency=low
+
+ * dh_install(1): Order options alphabetically. Closes:# 503896
+ * Fix some docs that refered to --srcdir rather than --sourcedir.
+ Closes: #504742
+ * Add Vcs-Browser field. Closes: #507804
+ * Ignore unknown options in DH_OPTIONS. Debhelper will always ignore
+ such options, even when unknown command-line options are converted back
+ to an error. This allows (ab)using DH_OPTIONS to pass command-specific
+ options.
+ (Note that getopt will warn about such unknown options. Eliminating this
+ warning without reimplementing much of Getopt::Long wasn't practical.)
+
+ -- Joey Hess <joeyh@debian.org> Sun, 14 Dec 2008 23:19:27 -0500
+
+debhelper (7.1.0) experimental; urgency=low
+
+ * dh_installchangelogs: Fall back to looking for changelog files ending
+ with ".txt". Closes: #498460
+ * dh_gencontrol: Ensure misc:Depends is set in substvars to avoid dpkg
+ complaining about it when it's empty. Closes: #498666
+ * dh: Fix typo in example. Closes: #500836
+ * Allow individual debhelper programs to define their own special options
+ by passing a hash to init(), which is later passed on the Getopt::Long.
+ Closes: #370823
+ * Move many command-specific options to only be accepted by the command
+ that uses them. Affected options are:
+ -x, -r, -R, -l, -L, -m,
+ --include-conffiles, --no-restart-on-upgrade, --no-start,
+ --restart-after-upgrade, --init-script, --filename, --flavor, --autodest,
+ --libpackage, --add-udeb, --dpkg-shlibdeps-params,
+ --dpkg-gencontrol-params, --update-rcd-params, --major, --remove-d,
+ --dirs-only, --keep-debug, --version-info, --list-missing, --fail-missing,
+ --language, --until, --after, --before, --remaining, --with
+ * If any third-party debhelper commands use any of the above options,
+ they will be broken, and need to be changed to pass options to init().
+ * To avoid breaking rules files that pass options to commands that do not
+ use them, debhelper will now only warn if it encounters an unknown
+ option. This will be converted back to an error later.
+
+ -- Joey Hess <joeyh@debian.org> Wed, 10 Sep 2008 13:58:00 -0400
+
+debhelper (7.0.17) unstable; urgency=low
+
+ [ Per Olofsson ]
+ * dh_auto_install: Fix man page, was referring to dh_auto_clean.
+
+ [ Joey Hess ]
+ * dh_gencontrol: Drop the Homepage field from udebs. Closes: #492719
+ * Typo. Closes: #493062
+ * dh_auto_install: Improve check for MakeMaker, to avoid passing PREFIX
+ if the Makefile was generated by Module::Build::Compat. Closes: #496157
+
+ -- Joey Hess <joeyh@debian.org> Fri, 22 Aug 2008 22:30:12 -0400
+
+debhelper (7.0.16) unstable; urgency=low
+
+ * dh: Avoid passing --with on to subcommands. Closes: #490886
+ * dh_installchangelogs: When searching for changelog in v7 mode, skip
+ empty files. Closes: #490937
+
+ -- Joey Hess <joeyh@debian.org> Sat, 19 Jul 2008 15:34:13 -0400
+
+debhelper (7.0.15) unstable; urgency=low
+
+ * dh_clean: Do not delete *-stamp files in -k mode in v7. Closes: #489918
+
+ -- Joey Hess <joeyh@debian.org> Wed, 09 Jul 2008 16:16:11 -0400
+
+debhelper (7.0.14) unstable; urgency=low
+
+ * Load python-support sequence file first, to allow ones loaded later to
+ disable it.
+
+ -- Joey Hess <joeyh@debian.org> Sat, 05 Jul 2008 08:23:32 -0400
+
+debhelper (7.0.13) unstable; urgency=low
+
+ * dh_auto_install: Rather than looking at the number of binary packages
+ being acted on, look at the total number of binary packages in the
+ source package when deciding whether to install to debian/package or
+ debian/tmp. This avoids inconsistencies when building mixed arch all+any
+ packages using the binary-indep and binary-arch targets.
+ Closes: #487938
+
+ -- Joey Hess <joeyh@debian.org> Wed, 25 Jun 2008 12:27:02 -0400
+
+debhelper (7.0.12) unstable; urgency=medium
+
+ * Correct docs about dh_install and debian/tmp in v7 mode. It first looks in
+ the current directory, or whatever is configured with --srcdir. Then it
+ always falls back to looking in debian/tmp.
+ * Medium urgency to get this doc fix into testing.
+
+ -- Joey Hess <joeyh@debian.org> Wed, 25 Jun 2008 03:36:50 -0400
+
+debhelper (7.0.11) unstable; urgency=low
+
+ * dh: Man page fix. Closes: #485116
+ * Add stamp files to example rules targets. Closes: #486327
+ * Add a build dependency on file. The rules file now runs dh_strip and
+ dh_shlibdeps, which both use it. (It could be changed not to, but
+ it's good to have it run all the commands as a test.) Closes: #486439
+ * Typo fix. Closes: #486464
+
+ -- Joey Hess <joeyh@debian.org> Mon, 16 Jun 2008 12:39:21 -0400
+
+debhelper (7.0.10) unstable; urgency=low
+
+ * dh_compress: Do not compress index.sgml files, as generated by gtk-doc.
+ Closes: #484772
+
+ -- Joey Hess <joeyh@debian.org> Fri, 06 Jun 2008 11:48:39 -0400
+
+debhelper (7.0.9) unstable; urgency=low
* rules.tiny: Typo fix. Closes: #479647
* dh_installinit: Add --restart-after-upgrade, which avoids stopping a
daemon in the prerm, and instead restarts it in the postinst, keeping
its downtime minimal. Since some daemons could break if files are upgraded
while they're running, it's not the default. It might become the default
- in a future (v8) compatability level. Closes: #471060
+ in a future (v8) compatibility level. Closes: #471060
* dh: fix POD error. Closes: #480191
* dh: Typo fixes. Closes: #480200
+ * dh: Add remove_command to the sequence interface.
+ * dh_auto_clean: setup.py clean can create pyc files. Remove. Closes: #481899
- -- Joey Hess <joeyh@debian.org> Mon, 05 May 2008 18:53:10 -0400
+ -- Joey Hess <joeyh@debian.org> Mon, 19 May 2008 12:47:47 -0400
debhelper (7.0.8) unstable; urgency=low
projects / debhelper.git / blobdiff