-debhelper (7.4.9) UNRELEASED; urgency=low
+debhelper (9.20120518) unstable; urgency=low
+
+ * Fix versioned dependency on dpkg for xz options. Closes: #672895
+ * dh_link: Doc improvement. Closes: #672988
+
+ -- Joey Hess <joeyh@debian.org> Fri, 18 May 2012 11:05:03 -0400
+
+debhelper (9.20120513) unstable; urgency=low
+
+ * Improve -v logging. Closes: #672448
+ * dh_builddeb: Build udebs with xz compression, level 1, extreme strategy.
+ This has been chosen to not need any more memory or cpu when uncompressing,
+ while yeilding the best compressions for udebs. Thanks, Philipp Kern.
+ * Depend on a new enough dpkg for above features. Backporters will need
+ to revert these changes.
+
+ -- Joey Hess <joeyh@debian.org> Sun, 13 May 2012 13:09:42 -0400
+
+debhelper (9.20120509) unstable; urgency=low
+
+ * dh_installman: Recognize sections from mdoc .Dt entries. Closes: #670210
+ Thanks, Guillem Jover
+ * Updated German man page translation. Closes: #671598
+ * dh_install: Reorder documentation for clarity. Closes: #672109
+
+ -- Joey Hess <joeyh@debian.org> Wed, 09 May 2012 12:59:15 -0400
+
+debhelper (9.20120419) unstable; urgency=low
+
+ * Fix compat level checking for cmake. Closes: #669181
+
+ -- Joey Hess <joeyh@debian.org> Tue, 17 Apr 2012 19:33:35 -0400
+
+debhelper (9.20120418) unstable; urgency=low
+
+ * cmake: Only pass CPPFLAGS in CFLAGS in v9.
+
+ -- Joey Hess <joeyh@debian.org> Tue, 17 Apr 2012 16:54:39 -0400
+
+debhelper (9.20120417) unstable; urgency=low
+
+ * cmake: Pass CPPFLAGS in CFLAGS. Closes: #668813
+ Thanks, Simon Ruderich for the patch and for verifying no affected
+ package is broken by this change.
+
+ -- Joey Hess <joeyh@debian.org> Tue, 17 Apr 2012 09:10:29 -0400
+
+debhelper (9.20120410) unstable; urgency=low
+
+ [ Joey Hess ]
+ * Fix a typo. Closes: #665891
+ * Conflict with too old automake for AM_UPDATE_INFO_DIR=no. Closes: #666901
+ * dh_md5sums: Don't skip DEBIAN directories other than the control files
+ one. Closes: #668276
+
+ [ Steve Langasek ]
+ * dh_installinit: rework upstart handling to comply with new policy
+ proposal; packages will ship both an init script and an upstart job,
+ instead of just an upstart job and a symlink to a compat wrapper.
+ Closes: #577040
+
+ -- Joey Hess <joeyh@debian.org> Tue, 10 Apr 2012 12:51:15 -0400
+
+debhelper (9.20120322) unstable; urgency=low
+
+ * Revert avoid expanding shell metacharacters in sed call in autoscript().
+ It breaks dh_usrlocal and must be considered part of its interface.
+ Added to interface documentation.
+ Closes: #665263
+
+ -- Joey Hess <joeyh@debian.org> Thu, 22 Mar 2012 17:37:56 -0400
+
+debhelper (9.20120312) unstable; urgency=low
+
+ * Also include CFLAGS in ld line for perl. Closes: #662666
+
+ -- Joey Hess <joeyh@debian.org> Tue, 13 Mar 2012 14:27:06 -0400
+
+debhelper (9.20120311) unstable; urgency=low
+
+ * dh_auto_install: Set AM_UPDATE_INFO_DIR=no to avoid automake
+ generating an info dir file. Closes: #634741
+ * dh_install: Man page clarification. Closes: #659635
+ * Avoid expanding shell metacharacters in sed call in autoscript().
+ Closes: #660794
+ * dh_auto_configure: Pass CPPFLAGS and LDFLAGS to Makefile.PL and Build.PL,
+ in compat level v9. Closes: #662666
+ Thanks, Dominic Hargreaves for the patch.
+ Thanks, Alessandro Ghedini, Niko Tyni, and Dominic Hargreaves for
+ testing all relevant packages to verify the safety of this late
+ change to v9.
+
+ -- Joey Hess <joeyh@debian.org> Sun, 11 Mar 2012 18:28:33 -0400
+
+debhelper (9.20120115) unstable; urgency=low
+
+ * Finalized v9 mode, which is the new recommended default.
+ (But continuing to use v8 is also fine.)
+ * It is now deprecated for a package to not specify a compatibility
+ level in debian/compat. Debhelper now warns if this is not done,
+ and packages without a debian/compat will eventually FTBFS.
+ * dh: --without foo,bar now supported.
+ * Updated German man page translation. Closes: #653360
+
+ -- Joey Hess <joeyh@debian.org> Sun, 15 Jan 2012 13:59:49 -0400
+
+debhelper (8.9.14) unstable; urgency=low
+
+ * Typo. Closes: #653006
+ * Typo. Closes: #653339
+
+ -- Joey Hess <joeyh@debian.org> Tue, 27 Dec 2011 11:53:44 -0400
+
+debhelper (8.9.13) unstable; urgency=low
+
+ * Pass CPPFLAGS to qmake. Closes: #646129 Thanks, Felix Geyert
+ * dh_strip: Use build-id in /usr/lib/debug in v9.
+ Closes: #642158 Thanks, Jakub Wilk
+ * Spanish translation update. Closes: #636245 Thanks, Omar Campagne
+ * Only enable executable config files in v9. The quality of file permissions
+ in debian/ directories turns out to be atrocious; who knew?
+
+ -- Joey Hess <joeyh@debian.org> Fri, 09 Dec 2011 13:53:38 -0400
+
+debhelper (8.9.12) unstable; urgency=low
+
+ * Debhelper config files may be made executable programs that output the
+ desired configuration. No further changes are planned to the config file
+ format; those needing powerful syntaxes may now use a programming language
+ of their choice. (Be careful aiming that at your feet.)
+ Closes: #235302, #372310, #235302, #614731,
+ Closes: #438601, #477625, #632860, #642129
+ * Added German translation of man pages, done by Chris Leick. Closes: #651221
+ * Typo fixes. Closes: #651224 Thanks, Chris Leick
+
+ -- Joey Hess <joeyh@debian.org> Wed, 07 Dec 2011 15:09:50 -0400
+
+debhelper (8.9.11) unstable; urgency=low
+
+ * Fix broken option passing to objcopy. Closes: #649044
+
+ -- Joey Hess <joeyh@debian.org> Thu, 17 Nov 2011 00:15:34 -0400
+
+debhelper (8.9.10) unstable; urgency=low
+
+ * dh_strip: In v9, pass --compress-debug-sections to objcopy.
+ Needs a new enough binutils and gdb; debhelper backport
+ may need to disable this.
+ Thanks, Aurelien Jarno and Bastien ROUCARIES. Closes: #631985
+ * dh: Ensure -a and -i are passed when running override_dh_command-arch
+ and override_dh_command-indep targets. This is needed when the binary
+ target is run, rather than binary-arch/binary-indep. Closes: #648901
+
+ -- Joey Hess <joeyh@debian.org> Wed, 16 Nov 2011 11:54:59 -0400
+
+debhelper (8.9.9) unstable; urgency=low
+
+ * dh_auto_build: Use target architecture (not host architecture)
+ for build directory name. Closes: #644553 Thanks, Tom Hughes
+ * dh: Add dh_auto_configure parameter example. Closes: #645335
+
+ -- Joey Hess <joeyh@debian.org> Fri, 04 Nov 2011 17:01:58 -0400
+
+debhelper (8.9.8) unstable; urgency=low
+
+ * dh_fixperms: Operate on .ali files throughout /usr/lib, including
+ multiarch dirs. Closes: #641279
+ * dh: Avoid compat deprecation warning before option parsing.
+ Closes: #641361
+ * Clarify description of dh_auto_* -- params. Closes: #642786
+ * Mention in debhelper(7) that buildsystem options are typically passed
+ to dh. Closes: #643069
+ * perl_makemaker: In v9, pass CFLAGS to Makefile.PL and Build.Pl
+ Closes: #643702, #497653 Thanks, Steve Langasek, gregor herrmann.
+
+ -- Joey Hess <joeyh@debian.org> Thu, 29 Sep 2011 15:41:16 -0400
+
+debhelper (8.9.7) unstable; urgency=low
+
+ * dh: Now you can use override_dh_command-arch and override_dh_command-indep
+ to run different overrides when building arch and indep packages. This
+ allows for a much simplified form of rules file in this situation, where
+ build-arch/indep and binary-arch/indep targets do not need to be manually
+ specified. See man page for examples. Closes: #640965
+ .
+ Note that if a rules file has say, override_dh_fixperms-arch,
+ but no corresponding override_dh_fixperms-indep, then the unoverridden
+ dh_fixperms will be run on the indep packages.
+ .
+ Note that the old override_dh_command takes precidence over the new
+ overrides, because mixing the two types of overrides would have been
+ too complicated. In particular, it's difficult to ensure an
+ old override target will work if it's sometimes constrained to only
+ acting on half the packages it would normally run on. This would be
+ a source of subtle bugs, so is avoided.
+ * dh: Don't bother running dh_shlibdebs, dh_makeshlibs, or dh_strip
+ in the binary target when all packages being acted on are indep.
+ * dh: Avoid running install sequence a third time in v9 when the
+ rules file has explicit binary-indep and binary-arch targets.
+ Closes: #639341 Thanks, Yann Dirson for test case.
+ * debhelper no longer build-depends on man-db or file, to ease bootstrapping.
+ * Remove obsolete versioned dependency on perl-base.
+ * Avoid writing debhelper log files in no-act mode. Closes: #640586
+ * Tighten parsing of DEB_BUILD_OPTIONS.
+
+ -- Joey Hess <joeyh@debian.org> Sun, 11 Sep 2011 20:29:22 -0400
+
+debhelper (8.9.6) unstable; urgency=low
+
+ * dh_installlogcheck: Add support for --name. Closes: #639020
+ Thanks, Gergely Nagy
+
+ -- Joey Hess <joeyh@debian.org> Tue, 23 Aug 2011 15:25:55 -0400
+
+debhelper (8.9.5) unstable; urgency=low
+
+ * dh_compress: Don't compress _sources documentation subdirectory
+ as used by python-sphinx. Closes: #637492
+ Thanks, Jakub Wilk
+ * dh_ucf: fix test for ucf/ucfr availability and quote filenames.
+ Closes: #638944
+ Thanks, Jeroen Schot
+
+ -- Joey Hess <joeyh@debian.org> Tue, 23 Aug 2011 13:25:54 -0400
+
+debhelper (8.9.4) unstable; urgency=low
+
+ * dh: The --before --after --until and --remaining options are deprecated.
+ Use override targets instead.
+ * Assume that the package can be cleaned (i.e. the build directory can be
+ removed) as long as it is built out-of-source tree and can be configured.
+ This is useful for derivative buildsystems which generate Makefiles.
+ (Modestas Vainius) Closes: #601590
+ * dh_auto_test: Run cmake tests in parallel when allowed by
+ DEB_BUILD_OPTIONS. (Modestas Vainius) Closes: #587885
+ * dpkg-buildflags is only used to set environment in v9, to avoid
+ re-breaking packages that were already broken a first time by
+ dpkg-buildpackage unconditionally setting the environment, and
+ worked around that by unsetting variables in the rules file.
+ (Example: numpy)
+
+ -- Joey Hess <joeyh@debian.org> Sat, 06 Aug 2011 18:58:59 -0400
+
+debhelper (8.9.3) unstable; urgency=low
+
+ * dh: Remove obsolete optimisation hack that caused sequence breakage
+ in v9 with a rules file with an explict build target. Closes: #634784
+
+ -- Joey Hess <joeyh@debian.org> Tue, 19 Jul 2011 23:26:43 -0400
+
+debhelper (8.9.2) unstable; urgency=low
+
+ * dh: Support make 3.82. Closes: #634385
+
+ -- Joey Hess <joeyh@debian.org> Mon, 18 Jul 2011 17:55:24 -0400
+
+debhelper (8.9.1) unstable; urgency=low
+
+ * Typo fixes. Closes: #632662
+ * dh: In v9, do not enable any python support commands. Closes: #634106
+ * Now the QT4 version of qmake can be explicitly selected by passing
+ --buildsystem=qmake_qt4. Closes: #566840
+ * Remove debhelper.log in compat level 1. Closes: #634155
+ * dh_builddeb: Build in parallel when allowed by DEB_BUILD_OPTIONS.
+ Closes: #589427 (Thanks, Gergely Nagy and Kari Pahula)
+
+ -- Joey Hess <joeyh@debian.org> Sun, 17 Jul 2011 16:31:27 -0400
+
+debhelper (8.9.0) unstable; urgency=low
+
+ * dh: In v9, any standard rules file targets, including build-arch,
+ build-indep, build, install, etc, can be defined in debian/rules
+ without needing to explicitly tell make the dependencies between
+ the targets. Closes: #629139
+ (Thanks, Roger Leigh)
+ * dh_auto_configure: In v9, does not include the source package name
+ in --libexecdir when using autoconf. Closes: #541458
+ * dh_auto_build, dh_auto_configure, dh: Set environment variables
+ listed by dpkg-buildflags --export. Any environment variables that
+ are already set to other values will not be changed.
+ Closes: #544844
+ * dh_movefiles: Optimise use of xargs. Closes: #627737
+ * Correct docs about multiarch and v9. Closes: #630826
+ * Fix example. Closes: #627534
+ * Fix error message. Closes: #628053
+ * dh_auto_configure: If there is a problem with cmake, display
+ the CMakeCache.txt.
+
+ -- Joey Hess <joeyh@debian.org> Fri, 24 Jun 2011 14:28:52 -0400
+
+debhelper (8.1.6) unstable; urgency=low
+
+ * dh_ucf: Fix missing space before ']'s in postrm autoscript.
+
+ -- Joey Hess <joeyh@debian.org> Thu, 28 Apr 2011 12:33:42 -0400
+
+debhelper (8.1.5) unstable; urgency=low
+
+ * dh_ucf: New command, contributed by Jeroen Schot. Closes: #213078
+ * dh_installgsettings: Correct bug in use of find that caused some
+ gsettings files to be missed. Closes: #624377
+
+ -- Joey Hess <joeyh@debian.org> Wed, 27 Apr 2011 21:33:50 -0400
+
+debhelper (8.1.4) unstable; urgency=low
+
+ * dh_clean: Remove debhelper logs for all packages, including packages
+ not being acted on. dh can sometimes produce such logs by accident
+ when passed bundled options (like "-Nfoo" instead of "-N foo") that
+ it does not understand; and it was not possible to fix that
+ for any compat level before v8. But also, such logs can occur
+ for other reasons, like interrupted builds during development,
+ and it should be safe to clean them all. Closes: #623446
+ * Fix Typos in documentation regarding {pre,post}{inst,rm}
+ Closes: #623709
+
+ -- Joey Hess <joeyh@debian.org> Fri, 22 Apr 2011 16:15:21 -0400
+
+debhelper (8.1.3) unstable; urgency=low
+
+ [ Joey Hess ]
+ * dh_auto_clean: Inhibit logging, so that, if dh_auto_clean is used
+ in some rule other than clean, perhaps to clean up an intermediate
+ build before a second build is run, debian/rules clean still runs it.
+ Closes: #615553
+ * Started work on Debhelper v9. It is still experimental, and more
+ changes may be added to that mode.
+ * Support multiarch in v9. Thanks, Steve Langasek. Closes: #617761
+ * dh_auto_configure: Support multiarch in v9 by passing multiarch
+ directories to --libdir and --libexecdir.
+ * dh_makeshlibs: Detect packages using multiarch directories and
+ make ${misc:Pre-Depends} expand to multiarch-support.
+ * Depend on dpkg-dev (>= 1.16.0) for multiarch support. Note to backporters:
+ If you remove that dependency, debhelper will fall back to not doing
+ multiarch stuff in v9 mode, which is probably what you want.
+ * Removed old example rules files.
+ * dh_installgsettings: New command to handle gsettings schema files.
+ Closes: #604727
+
+ [ Valery Perrin ]
+ * update french translation.
+ * Fix french misspelling.
+
+ -- Joey Hess <joeyh@debian.org> Tue, 05 Apr 2011 13:09:43 -0400
+
+debhelper (8.1.2) unstable; urgency=low
+
+ * Fix logging at end of an override target that never actually runs
+ the overridden command. Closes: #613418
+
+ -- Joey Hess <joeyh@debian.org> Mon, 14 Feb 2011 14:22:17 -0400
+
+debhelper (8.1.1) unstable; urgency=low
+
+ * dh_strip, dh_makeshlibs: use triplet-objdump, triplet-objcopy and
+ triplet-strip from cross-binutils when cross-compiling; Closes: #412118.
+ (Thanks, Loïc Minier)
+ * Improve handling of logging in override targets, so that
+ --remaining-packages can be used again. Now all debhelper commands run
+ in the override target are marked as running as part of the override,
+ and when the whole target is run, the log is updated to indicate that
+ commands run during the override have finished. Closes: #612828
+
+ -- Joey Hess <joeyh@debian.org> Thu, 10 Feb 2011 19:58:34 -0400
+
+debhelper (8.1.0) unstable; urgency=low
+
+ [ Joey Hess ]
+ * python_distutils: Pass --force to setup.py build, to ensure that when
+ python-dbg is run it does not win and result in scripts having it in
+ the shebang line. Closes: #589759
+ * Man page fixes about what program -u passes params to. Closes: #593342
+ * Avoid open fd 5 or 6 breaking buildsystem test suite. Closes: #596679
+ * Large update to Spanish man page translations by Omar Campagne.
+ Closes: #600913
+ * dh_installdeb: Support debian/package.maintscript files,
+ which can contain dpkg-maintscript-helper commands. This can be used
+ to automate moving or removing conffiles, or anything added to
+ dpkg-maintscript-helper later on. Closes: #574443
+ (Thanks, Colin Watson)
+ * Massive man page typography patch. Closes: #600883
+ (Thanks, David Prévot)
+ * Explicitly build-depend on a new enough perl-base. Closes: #601188
+ * dh: Inhibit logging when an override target runs the overridden command,
+ to avoid unexpected behavior if the command succeeded but the overall
+ target fails. Closes: #601037
+ * Fix deprecated command list on translated debhelper(7) man pages.
+ Closes: #601204
+ * dh: Improve filtering in dh_listpackages example. Closes: #604561
+ * dh: Add support for build-arch, build-indep, install-arch and
+ install-indep sequences. Closes: #604563
+ (Thanks, Roger Leigh)
+ * dh_listpackages: Do not display warnings if options cause no packages
+ to be listed.
+ * dh_installdocs: Clarify that debian/README.Debian and debian/TODO are
+ only installed into the first package listed in debian/control.
+ Closes: #606036
+ * dh_compress: Javascript files are not compressed, as these go with
+ (uncompressed) html files. Closes: #603553
+ * dh_compress: Ignore objects.inv files, generated by Sphinx documentation.
+ Closes: #608907
+ * dh_installinit: never call init scripts directly, only through invoke-rc.d
+ Closes: #610340
+ (Thanks, Steve Langasek)
+
+ [ Valery Perrin ]
+ * update french translation.
+ * Fix french misspelling.
+ * French translation update after massive man page typography
+
+ -- Joey Hess <joeyh@debian.org> Sat, 05 Feb 2011 12:00:04 -0400
+
+debhelper (8.0.0) unstable; urgency=low
+
+ [ Carsten Hey ]
+ * dh_fixperms: Ensure files in /etc/sudoers.d/ are mode 440. Closes: #589574
+
+ [ Joey Hess ]
+ * Finalized v8 mode, which is the new recommended default.
+
+ -- Joey Hess <joeyh@debian.org> Sat, 07 Aug 2010 11:27:24 -0400
+
+debhelper (7.9.3) unstable; urgency=low
+
+ * perl_makemaker: import compat(). Closes: #587654
+
+ -- Joey Hess <joeyh@debian.org> Wed, 30 Jun 2010 14:42:09 -0400
+
+debhelper (7.9.2) unstable; urgency=low
+
+ * In v8 mode, stop passing packlist=0 in perl_makemaker buildsystem,
+ since perl_build is tried first. Avoids the makemaker warning message
+ introduced by the fix to #527990.
+
+ -- Joey Hess <joeyh@debian.org> Tue, 29 Jun 2010 17:41:41 -0400
+
+debhelper (7.9.1) unstable; urgency=low
+
+ * Started work on Debhelper v8. It is still experimental, and more
+ changes are planned for that mode.
+ * dh_installman: Support .so links relative to the current section.
+ * dh_installman: Avoid converting .so links to symlinks if the link
+ target is not present in the same binary package, on advice of
+ Colin Watson. (To support eventual so search paths.)
+ * Add deprecation warning for dh_clean -k.
+ * dh_testversion: Removed this deprecated and unused command.
+ * debian/compress files are now deprecated. Seems only one package
+ (genesis) still uses them.
+ * dh_fixperms: Tighten globs used to find library .so files,
+ avoiding incorrectly matching things like "foo.sources". Closes: #583328
+ * dh_installchangelogs: Support packages placing their changelog in a
+ file with a name like HISTORY. Closes: #582749
+ * dh_installchangelogs: Also look for changelog files in doc(s)
+ subdirectories. Closes: #521258
+ * In v8 mode, do not allow directly passing unknown options to debhelper
+ commands. (Unknown options in DH_OPTIONS still only result in warnings.)
+ * In v8 mode, dh_makeshlibs will run dpkg-gensymbols on all shared
+ libraries it generates shlibs files for. This means that -X can be
+ used to exclude libraries from processing by dpkg-gensymbols. It also
+ means that libraries in unusual locations, where dpkg-gensymbols does
+ not itself normally look, will be passed to it, a behavior change which
+ may break some packages. Closes: #557603
+ * In v8 mode, dh expects the sequence to run is always its first parameter.
+ (Ie, use "dh $@ --foo", not "dh --foo $@")
+ This avoids ambiguities when parsing options to be passed on to debhelper
+ commands. (See #570039)
+ * In v8 mode, prefer the perl_build buildsystem over perl_makemaker.
+ Closes: #578805
+ * postrm-init: Avoid calling the error handler if update-rc.d fails.
+ Closes: #586065
+
+ -- Joey Hess <joeyh@debian.org> Wed, 16 Jun 2010 13:44:48 -0400
+
+debhelper (7.4.20) unstable; urgency=low
+
+ * Drop one more call to dpkg-architecture. Closes: #580837
+ (Raphael Geissert)
+ * Further reduce the number of calls to dpkg-architecture to zero,
+ in a typical package with no explicit architecture mentions
+ in control file or debhelper config files.
+ * dh_perl: use debian_abi for XS modules. Closes: #581233
+
+ -- Joey Hess <joeyh@debian.org> Wed, 12 May 2010 20:06:02 -0400
+
+debhelper (7.4.19) unstable; urgency=low
+
+ * Memoize architecture comparisons in samearch, and avoid calling
+ dpkg-architecture at all for simple comparisons that clearly
+ do not involve architecture wildcards. Closes:# 579317
+
+ -- Joey Hess <joeyh@debian.org> Mon, 26 Apr 2010 19:45:07 -0400
+
+debhelper (7.4.18) unstable; urgency=low
+
+ * dh_gconf: Depend on new gconf2 that uses triggers, and stop
+ calling triggered programs manually. Closes: #577179
+
+ -- Joey Hess <joeyh@debian.org> Mon, 26 Apr 2010 16:23:38 -0400
+
+debhelper (7.4.17) unstable; urgency=low
+
+ * Fix #572077 in one place I missed earlier. (See #576885)
+ * dh: Fixed example of overriding binary target.
+ * Began finalizing list of changes for v8 compat level.
+
+ -- Joey Hess <joeyh@debian.org> Thu, 08 Apr 2010 18:23:43 -0400
+
+debhelper (7.4.16) unstable; urgency=low
+
+ * Updated French translation.
+ * makefile buildsystem: Chomp output during test for full compatibility
+ with debhelper 7.4.11. Closes: #570503
+ * dh_install: Now --list-missing and --fail-missing are useful even when
+ not all packages are acted on (due to architecture limits or flags).
+ Closes: #570373
+ * Typo. Closes: #571968
+ * If neither -a or -i are specified, debhelper commands used to default
+ to acting on all packages in the control file, which was a guaranteed
+ failure if the control file listed packages that did not build for the
+ target architecture. After recent optimisations, this default behavior
+ can efficiently be changed to the more sane default of acting on only
+ packages that can be built for the current architecture. This change
+ is mostly useful when using minimal rules files with dh. Closes: #572077
+ * dh_md5sums: Sort to ensure stable, more diffable order. Closes: #573702
+ * dh: Allow --list-addons to be used when not in a source package.
+ Closes: #574351
+ * dh: Improve documentation.
+
+ -- Joey Hess <joeyh@debian.org> Tue, 06 Apr 2010 22:06:50 -0400
+
+debhelper (7.4.15) unstable; urgency=low
+
+ * The fix for #563557 caused some new trouble involving makefile
+ that misbehave when stderr is closed. Reopen it to /dev/null
+ when testing for the existance of a makefile target. Closes: #570443
+
+ -- Joey Hess <joeyh@debian.org> Thu, 18 Feb 2010 16:37:34 -0500
+
+debhelper (7.4.14) unstable; urgency=low
+
+ * dh: Disable option bundling to avoid mis-parsing bundled options such
+ as "-Bpython-support". Closes: #570039
+
+ -- Joey Hess <joeyh@debian.org> Tue, 16 Feb 2010 14:47:10 -0500
+
+debhelper (7.4.13) unstable; urgency=low
+
+ * dh_compress: Avoid compressing images in /usr/share/info. Closes: #567586
+ * Fix handling of -O with options specified by commands. Closes: #568081
+
+ -- Joey Hess <joeyh@debian.org> Tue, 02 Feb 2010 12:15:41 -0500
+
+debhelper (7.4.12) unstable; urgency=low
+
+ * dh_bugfiles: Doc typo. Closes: #563269
+ * makefile: Support the (asking for trouble) case of MAKE being set to
+ something with a space in it. Closes: #563557
+ * Fix warning about unknown options passed to commands in override targets.
+ * Add -O option, which can be used to pass options to commands, ignoring
+ options that they do not support.
+ * dh: Use -O to pass user-specified options to the commands it runs.
+ This solves the problem with passing "-Bbuild" to dh, where commands
+ that do not support -B would see a bogus -u option. Closes: #541773
+ (It also ensures that the commands dh prints out can really be run.)
+ * qmake: New buildsystem contributed by Kel Modderman. Closes: #566840
+ * Fix typo in call to abs2rel in --builddir sanitize code.
+ Closes: #567737
+
+ -- Joey Hess <joeyh@debian.org> Sat, 30 Jan 2010 20:23:02 -0500
+
+debhelper (7.4.11) unstable; urgency=low
+
+ * dh(1): Minor rewording of documentation of override commands.
+ Closes: #560421
+ * dh(1): Add an example of using an override target to avoid
+ dh running several commands. Closes: #560600
+ * dh_installman: Avoid doubled slashes in path. Closes: #561275
+ * dh_installxfonts: Use new update-fonts-alias --include and
+ --exclude options to better handle removal in the case where
+ xfonts-utils is removed before a font package is purged.
+ (#543512; thanks, Theppitak Karoonboonyanan)
+ * dh: Optimise handling of noop overrides, avoiding an unnecessary
+ call to make to handle them. (Modestas Vainius)
+
+ -- Joey Hess <joeyh@debian.org> Thu, 31 Dec 2009 11:32:34 -0500
+
+debhelper (7.4.10) unstable; urgency=low
+
+ * Add --parallel option that can be used to enable parallel building
+ without limiting the max number of parallel jobs. (Modestas Vainius)
+ * dh_makeshlibs: Temporarily revert fix for #557603, as it caused
+ dpkg-gensymbols to see libraries not in the regular search path and
+ broke builds. This will be re-enabled in v8. Closes: #560217
+
+ -- Joey Hess <joeyh@debian.org> Wed, 09 Dec 2009 15:17:19 -0500
+
+debhelper (7.4.9) unstable; urgency=low
* Typo. Closes: #558654
* dh_installinit: Fix installation of defaults file when an upstart job is
installed. Closes: #558782
- -- Joey Hess <joeyh@debian.org> Sun, 29 Nov 2009 14:06:48 -0500
+ -- Joey Hess <joeyh@debian.org> Mon, 30 Nov 2009 14:21:10 -0500
debhelper (7.4.8) unstable; urgency=low
In the meantime, lots of packages have switched to using v2, despite my
warnings that doing so leaves packages open to being broken without
notice until v2 is complete.
- * Therefore, I am calling v2 complete, as it is. Future non-compatabile
+ * Therefore, I am calling v2 complete, as it is. Future non-compatible
changes will happen in v3, which will be started soon. This means that
by using debhelper v2, one major thing changes: debhelper uses
debian/<package> as the temporary directory for *all* packages;
current compatibility level is equal to that number.
* doc/PROGRAMMING: documented that.
* debhelper itself now builds using DH_COMPAT=2.
- * dh_debstd forces DH_COMPAT=1, because it needs to stay compatable with
+ * dh_debstd forces DH_COMPAT=1, because it needs to stay compatible with
debstd after all.
-- Joey Hess <joeyh@debian.org> Thu, 1 Jul 1999 13:37:58 -0700