+debhelper (7.0.17) UNRELEASED; urgency=low
+
+ [ Per Olofsson ]
+ * dh_auto_install: Fix man page, was referring to dh_auto_clean.
+
+ [ Joey Hess ]
+ * dh_gencontrol: Drop the Homepage field from udebs. Closes: #492719
+
+ -- Per Olofsson <pelle@debian.org> Wed, 23 Jul 2008 10:52:14 +0200
+
+debhelper (7.0.16) unstable; urgency=low
+
+ * dh: Avoid passing --with on to subcommands. Closes: #490886
+ * dh_installchangelogs: When searching for changelog in v7 mode, skip
+ empty files. Closes: #490937
+
+ -- Joey Hess <joeyh@debian.org> Sat, 19 Jul 2008 15:34:13 -0400
+
+debhelper (7.0.15) unstable; urgency=low
+
+ * dh_clean: Do not delete *-stamp files in -k mode in v7. Closes: #489918
+
+ -- Joey Hess <joeyh@debian.org> Wed, 09 Jul 2008 16:16:11 -0400
+
+debhelper (7.0.14) unstable; urgency=low
+
+ * Load python-support sequence file first, to allow ones loaded later to
+ disable it.
+
+ -- Joey Hess <joeyh@debian.org> Sat, 05 Jul 2008 08:23:32 -0400
+
+debhelper (7.0.13) unstable; urgency=low
+
+ * dh_auto_install: Rather than looking at the number of binary packages
+ being acted on, look at the total number of binary packages in the
+ source package when deciding whether to install to debian/package or
+ debian/tmp. This avoids inconsistencies when building mixed arch all+any
+ packages using the binary-indep and binary-arch targets.
+ Closes: #487938
+
+ -- Joey Hess <joeyh@debian.org> Wed, 25 Jun 2008 12:27:02 -0400
+
+debhelper (7.0.12) unstable; urgency=medium
+
+ * Correct docs about dh_install and debian/tmp in v7 mode. It first looks in
+ the current directory, or whatever is configured with --srcdir. Then it
+ always falls back to looking in debian/tmp.
+ * Medium urgency to get this doc fix into testing.
+
+ -- Joey Hess <joeyh@debian.org> Wed, 25 Jun 2008 03:36:50 -0400
+
+debhelper (7.0.11) unstable; urgency=low
+
+ * dh: Man page fix. Closes: #485116
+ * Add stamp files to example rules targets. Closes: #486327
+ * Add a build dependency on file. The rules file now runs dh_strip and
+ dh_shlibdeps, which both use it. (It could be changed not to, but
+ it's good to have it run all the commands as a test.) Closes: #486439
+ * Typo fix. Closes: #486464
+
+ -- Joey Hess <joeyh@debian.org> Mon, 16 Jun 2008 12:39:21 -0400
+
+debhelper (7.0.10) unstable; urgency=low
+
+ * dh_compress: Do not compress index.sgml files, as generated by gtk-doc.
+ Closes: #484772
+
+ -- Joey Hess <joeyh@debian.org> Fri, 06 Jun 2008 11:48:39 -0400
+
+debhelper (7.0.9) unstable; urgency=low
+
+ * rules.tiny: Typo fix. Closes: #479647
+ * dh_installinit: Add --restart-after-upgrade, which avoids stopping a
+ daemon in the prerm, and instead restarts it in the postinst, keeping
+ its downtime minimal. Since some daemons could break if files are upgraded
+ while they're running, it's not the default. It might become the default
+ in a future (v8) compatibility level. Closes: #471060
+ * dh: fix POD error. Closes: #480191
+ * dh: Typo fixes. Closes: #480200
+ * dh: Add remove_command to the sequence interface.
+ * dh_auto_clean: setup.py clean can create pyc files. Remove. Closes: #481899
+
+ -- Joey Hess <joeyh@debian.org> Mon, 19 May 2008 12:47:47 -0400
+
+debhelper (7.0.8) unstable; urgency=low
+
+ * dh: Add an interface that third-party packages providing debhelper commands
+ can use to insert them into a command sequence.
+ (See dh(1), "SEQUENCE ADDONS".)
+ * dh: --with=foo can be used to include such third-party commands.
+ So, for example, --with=cli could add the dh_cli* commands from
+ cli-common.
+ * Moved python-support special case out of dh and into a python-support
+ sequence addon. --with=python-support is enabled by default to avoid
+ breaking backwards compatability.
+
+ -- Joey Hess <joeyh@debian.org> Sun, 04 May 2008 16:10:54 -0400
+
+debhelper (7.0.7) unstable; urgency=low
+
+ * dh_installxfonts: Fix precidence problem that exposes a new warning
+ message in perl 5.10.
+
+ -- Joey Hess <joeyh@debian.org> Sun, 04 May 2008 13:43:41 -0400
+
+debhelper (7.0.6) unstable; urgency=low
+
+ * dh_auto_test: Correct Module::Build tests.
+
+ -- Joey Hess <joeyh@debian.org> Sat, 03 May 2008 12:58:50 -0400
+
+debhelper (7.0.5) unstable; urgency=low
+
+ * Convert copyright file to new format.
+ * dh_test*: inhibit logging. Closes: #478958
+
+ -- Joey Hess <joeyh@debian.org> Thu, 01 May 2008 19:52:00 -0400
+
+debhelper (7.0.4) unstable; urgency=low
+
+ * Fix underescaped $ in Makefile. Closes: #478475
+ * dh_auto_test: Run tests for Module::Build packages. (Florian Ragwitz)
+
+ -- Joey Hess <joeyh@debian.org> Wed, 30 Apr 2008 02:17:01 -0400
+
+debhelper (7.0.3) unstable; urgency=low
+
+ * dh: Fix man page typos. Closes: #477933
+ * Add missing $! to error message when the log can't be opened.
+ * One problem with the log files is that if dh_clean is not the last command
+ run, they will be left behind. This is a particular problem on build
+ daemons that use real root. Especially if cdbs is used, since it runs
+ dh_listpackages after clean, thereby leaving behind log files that
+ only root can touch. Avoid this particular special case by inhibiting
+ logging by dh_listpackages.
+
+ -- Joey Hess <joeyh@debian.org> Tue, 29 Apr 2008 01:40:03 -0400
+
+debhelper (7.0.2) unstable; urgency=low
+
+ * dh: Optimise the case where the binary-arch or binary-indep sequence is
+ run and there are no packages of that type.
+ * dh_auto_configure: Set PERL_MM_USE_DEFAULT when configuring MakeMaker
+ packages to avoid interactive prompts.
+ * dh_auto_*: Also support packages using Module::Build.
+ * dh_auto_*: Fix some calls to setup.py. Now tested and working with
+ python packages.
+ * dh_install: Find all possible cases of "changelog" and "changes", rather
+ than just looking for some predefined common cases.
+
+ -- Joey Hess <joeyh@debian.org> Thu, 24 Apr 2008 21:55:49 -0400
+
+debhelper (7.0.1) unstable; urgency=low
+
+ * I lied, one more v7 change slipped in..
+ * dh_installchangelogs: In v7 mode, if no upstream changelog is specified,
+ and the package is not native, guess at a few common changelog filenames.
+
+ -- Joey Hess <joeyh@debian.org> Thu, 24 Apr 2008 00:16:19 -0400
+
+debhelper (7.0.0) unstable; urgency=low
+
+ * dh: New program that runs a series of debhelper commands in a sequence.
+ This can be used to construct very short rules files (as short as 3
+ lines), while still exposing the full power of debhelper when it's
+ needed.
+ * dh_auto_configure: New program, automates running ./configure,
+ Makefile.PL, and python distutils. Calls them with exactly the same
+ options as cdbs does by default, and allows adding/overriding options.
+ * dh_auto_build: New program, automates building the package by either
+ running make or using setup.py. (Support for cmake and other build systems
+ planned but not yet implemented.)
+ * dh_auto_test: New program, automates running make test or make check
+ if the Makefile has such a target.
+ * dh_auto_clean: New program, automates running make clean (or distclean,
+ or realclean), or using setup.py to clean up.
+ * dh_auto_install: New program, automates running make install, or using
+ setup.py to install. Supports the PREFIX=/usr special case needed by
+ MakeMaker Makefiles. (Support for cmake and other build systems planned
+ but not yet implemented.)
+ * New v7 mode, which only has three changes from v6, and is the new
+ recommended default, especially when using dh.
+ * dh_install: In v7 mode, if --sourcedir is not specified, first look for
+ files in debian/tmp, and then will look in the current directory. This
+ allows dh_install to interoperate with dh_auto_install without needing any
+ special parameters.
+ * dh_clean: In v7 mode, read debian/clean and delete all files listed
+ therein.
+ * dh_clean: In v7 mode, automatically delete *-stamp files.
+ * Add a Makefile and simplify this package's own rules file using
+ all the new toys.
+ * dh_clean: Don't delete core dumps. (Too DWIM, and "core" is not
+ necessarily a core dump.) Closes: #477391
+ * dh_prep: New program, does the same as dh_clean -k (which will be
+ deprecated later).
+
+ -- Joey Hess <joeyh@debian.org> Wed, 23 Apr 2008 23:14:57 -0400
+
+debhelper (6.0.12) unstable; urgency=low
+
+ * dh_icons: Support .xpm format icons. Stop looking for .jpg icons, and
+ also, for completeness, support .icon files. This matches the set of
+ extensions supported by gtk-update-icon-cache. Closes: #448094
+
+ -- Joey Hess <joeyh@debian.org> Sat, 19 Apr 2008 16:43:31 -0400
+
+debhelper (6.0.11) unstable; urgency=medium
+
+ * dh_installman: man --recode transparently uncompresses compressed
+ pages. So when saving the output back, save it to a non-compressed
+ filename (and delete the original, compressed file). Closes: #470913
+
+ -- Joey Hess <joeyh@debian.org> Tue, 01 Apr 2008 18:31:12 -0400
+
+debhelper (6.0.10) unstable; urgency=low
+
+ * dh_perl: Remove empty directories created by MakeMaker.
+
+ -- Joey Hess <joeyh@debian.org> Tue, 25 Mar 2008 14:11:57 -0400
+
+debhelper (6.0.9) unstable; urgency=low
+
+ * dh_installman: Don't recode symlinks. Closes: #471196
+
+ -- Joey Hess <joeyh@debian.org> Sun, 16 Mar 2008 13:53:39 -0400
+
+debhelper (6.0.8) unstable; urgency=low
+
+ * dh_installman: Convert all man pages in the build directory to utf-8, not
+ just those installed by the program.
+
+ -- Joey Hess <joeyh@debian.org> Mon, 10 Mar 2008 18:40:25 -0400
+
+debhelper (6.0.7) unstable; urgency=low
+
+ * dh_lintian: Finally added this since linda is gone and there's only
+ lintian to worry about supporting. Closes: #109642, #166320, #206765
+ (Thanks to Steve M. Robbins for the initial implementation.)
+
+ -- Joey Hess <joeyh@debian.org> Thu, 06 Mar 2008 13:55:46 -0500
+
+debhelper (6.0.6) unstable; urgency=low
+
+ * dh_compress: Pass -n to gzip to yeild more reproducible file contents.
+ The time stamp information need not be contained in the .gz file since the
+ time stamp is preserved when compressing and decompressing. Closes: #467100
+ * The order of dependencies generated by debhelper has been completly random
+ (hash key order), so sort it. Closes: #468959
+
+ -- Joey Hess <joeyh@debian.org> Wed, 05 Mar 2008 21:35:21 -0500
+
+debhelper (6.0.5) unstable; urgency=low
+
+ * dh_installman: Recode all man pages to utf-8 on installation.
+ Closes: #462937 (Colin Watson)
+ * Depend on a new enough version of man-db.
+
+ -- Joey Hess <joeyh@debian.org> Mon, 28 Jan 2008 16:43:10 -0500
+
debhelper (6.0.4) unstable; urgency=low
* dh_strip: Improve the idempotency fix put in for #380314.