#
from __future__ import print_function
-import copy
-import getopt
import binascii
+import copy
+import getopt
import hashlib
import os
+import posix
+import pwd
import re
import subprocess
import sys
-from distutils.version import LooseVersion as Version
+import shutil
+import time
-from itertools import chain
from collections import OrderedDict
+from distutils.version import LooseVersion as Version
+from functools import reduce
+from itertools import chain
+
+try:
+ input = raw_input
+except NameError:
+ pass
virtual_profiles = [
# (name, description, callback)
("common", "Clone all connected outputs at the largest common resolution", None),
+ ("clone-largest", "Clone all connected outputs with the largest resolution (scaled down if necessary)", None),
("horizontal", "Stack all connected outputs horizontally at their largest resolution", None),
("vertical", "Stack all connected outputs vertically at their largest resolution", None),
]
-h, --help get this small help
-c, --change reload current setup
--s, --save <profile> save your current setup to profile <profile>
--l, --load <profile> load profile <profile>
-d, --default <profile> make profile <profile> the default profile
---force force (re)loading of a profile
---fingerprint fingerprint your current hardware setup
+-l, --load <profile> load profile <profile>
+-s, --save <profile> save your current setup to profile <profile>
+-r, --remove <profile> remove profile <profile>
+--batch run autorandr for all users with active X11 sessions
--config dump your current xrandr setup
+--debug enable verbose output
--dry-run don't change anything, only print the xrandr commands
-
- To prevent a profile from being loaded, place a script call "block" in its
- directory. The script is evaluated before the screen setup is inspected, and
- in case of it returning a value of 0 the profile is skipped. This can be used
- to query the status of a docking station you are about to leave.
+--fingerprint fingerprint your current hardware setup
+--force force (re)loading of a profile
+--skip-options <option> comma separated list of xrandr arguments (e.g. "gamma")
+ to skip both in detecting changes and applying a profile
If no suitable profile can be identified, the current configuration is kept.
To change this behaviour and switch to a fallback configuration, specify
--default <profile>.
- Another script called "postswitch" can be placed in the directory
- ~/.config/autorandr (or ~/.autorandr if you have an old installation) as well
- as in any profile directories: The scripts are executed after a mode switch
- has taken place and can notify window managers.
+ autorandr supports a set of per-profile and global hooks. See the documentation
+ for details.
The following virtual configurations are available:
""".strip()
+
+class AutorandrException(Exception):
+ def __init__(self, message, original_exception=None, report_bug=False):
+ self.message = message
+ self.report_bug = report_bug
+ if original_exception:
+ self.original_exception = original_exception
+ trace = sys.exc_info()[2]
+ while trace.tb_next:
+ trace = trace.tb_next
+ self.line = trace.tb_lineno
+ self.file_name = trace.tb_frame.f_code.co_filename
+ else:
+ try:
+ import inspect
+ frame = inspect.currentframe().f_back
+ self.line = frame.f_lineno
+ self.file_name = frame.f_code.co_filename
+ except:
+ self.line = None
+ self.file_name = None
+ self.original_exception = None
+
+ if os.path.abspath(self.file_name) == os.path.abspath(sys.argv[0]):
+ self.file_name = None
+
+ def __str__(self):
+ retval = [self.message]
+ if self.line:
+ retval.append(" (line %d%s)" % (self.line, ("; %s" % self.file_name) if self.file_name else ""))
+ if self.original_exception:
+ retval.append(":\n ")
+ retval.append(str(self.original_exception).replace("\n", "\n "))
+ if self.report_bug:
+ retval.append("\nThis appears to be a bug. Please help improving autorandr by reporting it upstream:"
+ "\nhttps://github.com/phillipberndt/autorandr/issues"
+ "\nPlease attach the output of `xrandr --verbose` to your bug report if appropriate.")
+ return "".join(retval)
+
+
class XrandrOutput(object):
"Represents an XRandR output"
# This regular expression is used to parse an output in `xrandr --verbose'
XRANDR_OUTPUT_REGEXP = """(?x)
^(?P<output>[^ ]+)\s+ # Line starts with output name
- (?: # Differentiate disconnected and connected in first line
- disconnected |
+ (?: # Differentiate disconnected and connected
+ disconnected | # in first line
unknown\ connection |
- (?P<connected>connected)\s+ # If connected:
- (?:
- (?P<primary>primary\ )? # Might be primary screen
+ (?P<connected>connected)
+ )
+ \s*
+ (?P<primary>primary\ )? # Might be primary screen
+ (?:\s*
(?P<width>[0-9]+)x(?P<height>[0-9]+) # Resolution (might be overridden below!)
- \+(?P<x>[0-9]+)\+(?P<y>[0-9]+)\s+ # Position
+ \+(?P<x>-?[0-9]+)\+(?P<y>-?[0-9]+)\s+ # Position
(?:\(0x[0-9a-fA-F]+\)\s+)? # XID
(?P<rotate>(?:normal|left|right|inverted))\s+ # Rotation
(?:(?P<reflect>X\ and\ Y|X|Y)\ axis)? # Reflection
- )? # .. but everything of the above only if the screen is in use.
- ).*
+ )? # .. but only if the screen is in use.
+ (?:[\ \t]*\([^\)]+\))(?:\s*[0-9]+mm\sx\s[0-9]+mm)?
+ (?:[\ \t]*panning\ (?P<panning>[0-9]+x[0-9]+\+[0-9]+\+[0-9]+))? # Panning information
+ (?:[\ \t]*tracking\ (?P<tracking>[0-9]+x[0-9]+\+[0-9]+\+[0-9]+))? # Tracking information
+ (?:[\ \t]*border\ (?P<border>(?:[0-9]+/){3}[0-9]+))? # Border information
(?:\s*(?: # Properties of the output
- Gamma: (?P<gamma>[0-9\.: ]+) | # Gamma value
+ Gamma: (?P<gamma>(?:inf|[0-9\.: e])+) | # Gamma value
Transform: (?P<transform>(?:[\-0-9\. ]+\s+){3}) | # Transformation matrix
EDID: (?P<edid>\s*?(?:\\n\\t\\t[0-9a-f]+)+) | # EDID of the output
(?![0-9])[^:\s][^:\n]+:.*(?:\s\\t[\\t ].+)* # Other properties
))+
\s*
(?P<modes>(?:
- (?P<mode_width>[0-9]+)x(?P<mode_height>[0-9]+).+?\*current.+\s+
- h:.+\s+v:.+clock\s+(?P<rate>[0-9\.]+)Hz\s* | # Interesting (current) resolution: Extract rate
- [0-9]+x[0-9]+.+\s+h:.+\s+v:.+\s* # Other resolutions
+ (?P<mode_name>\S+).+?\*current.*\s+ # Interesting (current) resolution:
+ h:\s+width\s+(?P<mode_width>[0-9]+).+\s+ # Extract rate
+ v:\s+height\s+(?P<mode_height>[0-9]+).+clock\s+(?P<rate>[0-9\.]+)Hz\s* |
+ \S+(?:(?!\*current).)+\s+h:.+\s+v:.+\s* # Other resolutions
)*)
"""
XRANDR_OUTPUT_MODES_REGEXP = """(?x)
- (?P<width>[0-9]+)x(?P<height>[0-9]+)
- .*?(?P<preferred>\+preferred)?
- \s+h:.+
- \s+v:.+clock\s+(?P<rate>[0-9\.]+)Hz
+ (?P<name>\S+).+?(?P<preferred>\+preferred)?\s+
+ h:\s+width\s+(?P<width>[0-9]+).+\s+
+ v:\s+height\s+(?P<height>[0-9]+).+clock\s+(?P<rate>[0-9\.]+)Hz\s* |
"""
XRANDR_13_DEFAULTS = {
"transform": "1,0,0,0,1,0,0,0,1",
+ "panning": "0x0",
}
XRANDR_12_DEFAULTS = {
XRANDR_DEFAULTS = dict(list(XRANDR_13_DEFAULTS.items()) + list(XRANDR_12_DEFAULTS.items()))
+ EDID_UNAVAILABLE = "--CONNECTED-BUT-EDID-UNAVAILABLE-"
+
def __repr__(self):
- return "<%s%s %s>" % (self.output, (" %s..%s" % (self.edid[:5], self.edid[-5:])) if self.edid else "", " ".join(self.option_vector))
+ return "<%s%s %s>" % (self.output, self.short_edid, " ".join(self.option_vector))
+
+ @property
+ def short_edid(self):
+ return ("%s..%s" % (self.edid[:5], self.edid[-5:])) if self.edid else ""
@property
def options_with_defaults(self):
if xrandr_version() >= Version("1.2"):
options.update(self.XRANDR_12_DEFAULTS)
options.update(self.options)
- return options
+ return {a: b for a, b in options.items() if a not in self.ignored_options}
+
+ @property
+ def filtered_options(self):
+ "Return a dictionary of options without ignored options"
+ return {a: b for a, b in self.options.items() if a not in self.ignored_options}
@property
def option_vector(self):
"Return the command line parameters for XRandR for this instance"
- return sum([["--%s" % option[0], option[1]] if option[1] else ["--%s" % option[0]] for option in chain((("output", self.output),), sorted(self.options_with_defaults.items()))], [])
+ args = ["--output", self.output]
+ for option, arg in sorted(self.options_with_defaults.items()):
+ args.append("--%s" % option)
+ if arg:
+ args.append(arg)
+ return args
@property
def option_string(self):
"Return the command line parameters in the configuration file format"
- return "\n".join([ " ".join(option) if option[1] else option[0] for option in chain((("output", self.output),), sorted(self.options.items()))])
+ options = ["output %s" % self.output]
+ for option, arg in sorted(self.filtered_options.items()):
+ if arg:
+ options.append("%s %s" % (option, arg))
+ else:
+ options.append(option)
+ return "\n".join(options)
@property
def sort_key(self):
"Return a key to sort the outputs for xrandr invocation"
if not self.edid:
+ return -2
+ if "off" in self.options:
return -1
if "pos" in self.options:
x, y = map(float, self.options["pos"].split("x"))
self.output = output
self.edid = edid
self.options = options
+ self.ignored_options = []
self.remove_default_option_values()
+ def set_ignored_options(self, options):
+ "Set a list of xrandr options that are never used (neither when comparing configurations nor when applying them)"
+ self.ignored_options = list(options)
+
def remove_default_option_values(self):
"Remove values from the options dictionary that are superflous"
if "off" in self.options and len(self.options.keys()) > 1:
- self.options = { "off": None }
+ self.options = {"off": None}
return
for option, default_value in self.XRANDR_DEFAULTS.items():
if option in self.options and self.options[option] == default_value:
xrandr_output = xrandr_output.replace("\r\n", "\n")
match_object = re.search(XrandrOutput.XRANDR_OUTPUT_REGEXP, xrandr_output)
except:
- raise RuntimeError("Parsing XRandR output failed, there is an error in the regular expression.")
+ raise AutorandrException("Parsing XRandR output failed, there is an error in the regular expression.",
+ report_bug=True)
if not match_object:
debug = debug_regexp(XrandrOutput.XRANDR_OUTPUT_REGEXP, xrandr_output)
- raise RuntimeError("Parsing XRandR output failed, the regular expression did not match: %s" % debug)
+ raise AutorandrException("Parsing XRandR output failed, the regular expression did not match: %s" % debug,
+ report_bug=True)
remainder = xrandr_output[len(match_object.group(0)):]
if remainder:
- raise RuntimeError(("Parsing XRandR output failed, %d bytes left unmatched after regular expression, "
- "starting at byte %d with ..'%s'.") % (len(remainder), len(len(match_object.group(0))), remainder[:10]))
+ raise AutorandrException("Parsing XRandR output failed, %d bytes left unmatched after "
+ "regular expression, starting at byte %d with ..'%s'." %
+ (len(remainder), len(match_object.group(0)), remainder[:10]),
+ report_bug=True)
match = match_object.groupdict()
modes = []
if match["modes"]:
- modes = [ x.groupdict() for x in re.finditer(XrandrOutput.XRANDR_OUTPUT_MODES_REGEXP, match["modes"]) ]
+ modes = []
+ for mode_match in re.finditer(XrandrOutput.XRANDR_OUTPUT_MODES_REGEXP, match["modes"]):
+ if mode_match.group("name"):
+ modes.append(mode_match.groupdict())
if not modes:
- raise RuntimeError("Parsing XRandR output failed, couldn't find any display modes")
+ raise AutorandrException("Parsing XRandR output failed, couldn't find any display modes", report_bug=True)
options = {}
if not match["connected"]:
- options["off"] = None
edid = None
- elif not match["width"]:
- options["off"] = None
+ elif match["edid"]:
edid = "".join(match["edid"].strip().split())
else:
- if match["mode_width"]:
+ edid = "%s-%s" % (XrandrOutput.EDID_UNAVAILABLE, match["output"])
+
+ if not match["width"]:
+ options["off"] = None
+ else:
+ if match["mode_name"]:
+ options["mode"] = match["mode_name"]
+ elif match["mode_width"]:
options["mode"] = "%sx%s" % (match["mode_width"], match["mode_height"])
else:
if match["rotate"] not in ("left", "right"):
elif match["reflect"] == "X and Y":
options["reflect"] = "xy"
options["pos"] = "%sx%s" % (match["x"], match["y"])
+ if match["panning"]:
+ panning = [match["panning"]]
+ if match["tracking"]:
+ panning += ["/", match["tracking"]]
+ if match["border"]:
+ panning += ["/", match["border"]]
+ options["panning"] = "".join(panning)
if match["transform"]:
transformation = ",".join(match["transform"].strip().split())
if transformation != "1.000000,0.000000,0.000000,0.000000,1.000000,0.000000,0.000000,0.000000,1.000000":
options["transform"] = transformation
- if not match["mode_width"]:
- # TODO We'd need to apply the reverse transformation here. Let's see if someone complains, I doubt that this
- # special case is actually required.
- print("Warning: Output %s has a transformation applied. Could not determine correct mode!", file=sys.stderr)
+ if not match["mode_name"]:
+ # TODO We'd need to apply the reverse transformation here. Let's see if someone complains,
+ # I doubt that this special case is actually required.
+ print("Warning: Output %s has a transformation applied. Could not determine correct mode! "
+ "Using `%s'." % (match["output"], options["mode"]), file=sys.stderr)
if match["gamma"]:
gamma = match["gamma"].strip()
+ # xrandr prints different values in --verbose than it accepts as a parameter value for --gamma
+ # Also, it is not able to work with non-standard gamma ramps. Finally, it auto-corrects 0 to 1,
+ # so we approximate by 1e-10.
+ gamma = ":".join([str(max(1e-10, round(1. / float(x), 3))) for x in gamma.split(":")])
options["gamma"] = gamma
if match["rate"]:
options["rate"] = match["rate"]
- edid = "".join(match["edid"].strip().split())
return XrandrOutput(match["output"], edid, options), modes
for line in configuration.split("\n"):
if line:
line = line.split(None, 1)
+ if line and line[0].startswith("#"):
+ continue
options[line[0]] = line[1] if len(line) > 1 else None
edid = None
edid = edid_map[options["output"]]
else:
# This fuzzy matching is for legacy autorandr that used sysfs output names
- fuzzy_edid_map = [ re.sub("(card[0-9]+|-)", "", x) for x in edid_map.keys() ]
+ fuzzy_edid_map = [re.sub("(card[0-9]+|-)", "", x) for x in edid_map.keys()]
fuzzy_output = re.sub("(card[0-9]+|-)", "", options["output"])
if fuzzy_output in fuzzy_edid_map:
edid = edid_map[list(edid_map.keys())[fuzzy_edid_map.index(fuzzy_output)]]
elif "off" not in options:
- raise RuntimeError("Failed to find an EDID for output `%s' in setup file, required as `%s' is not off in config file."
- % (options["output"], options["output"]))
+ raise AutorandrException("Failed to find an EDID for output `%s' in setup file, required as `%s' "
+ "is not off in config file." % (options["output"], options["output"]))
output = options["output"]
del options["output"]
def edid_equals(self, other):
"Compare to another XrandrOutput's edid and on/off-state, taking legacy autorandr behaviour (md5sum'ing) into account"
if self.edid and other.edid:
- if len(self.edid) == 32 and len(other.edid) != 32:
+ if len(self.edid) == 32 and len(other.edid) != 32 and not other.edid.startswith(XrandrOutput.EDID_UNAVAILABLE):
return hashlib.md5(binascii.unhexlify(other.edid)).hexdigest() == self.edid
- if len(self.edid) != 32 and len(other.edid) == 32:
+ if len(self.edid) != 32 and len(other.edid) == 32 and not self.edid.startswith(XrandrOutput.EDID_UNAVAILABLE):
return hashlib.md5(binascii.unhexlify(self.edid)).hexdigest() == other.edid
return self.edid == other.edid
+ def __ne__(self, other):
+ return not (self == other)
+
def __eq__(self, other):
- return self.edid_equals(other) and self.output == other.output and self.options == other.options
+ return self.edid_equals(other) and self.output == other.output and self.filtered_options == other.filtered_options
+
+ def verbose_diff(self, other):
+ "Compare to another XrandrOutput and return a list of human readable differences"
+ diffs = []
+ if not self.edid_equals(other):
+ diffs.append("EDID `%s' differs from `%s'" % (self.short_edid, other.short_edid))
+ if self.output != other.output:
+ diffs.append("Output name `%s' differs from `%s'" % (self.output, other.output))
+ if "off" in self.options and "off" not in other.options:
+ diffs.append("The output is disabled currently, but active in the new configuration")
+ elif "off" in other.options and "off" not in self.options:
+ diffs.append("The output is currently enabled, but inactive in the new configuration")
+ else:
+ for name in set(chain.from_iterable((self.options.keys(), other.options.keys()))):
+ if name not in other.options:
+ diffs.append("Option --%s %sis not present in the new configuration" %
+ (name, "(= `%s') " % self.options[name] if self.options[name] else ""))
+ elif name not in self.options:
+ diffs.append("Option --%s (`%s' in the new configuration) is not present currently" %
+ (name, other.options[name]))
+ elif self.options[name] != other.options[name]:
+ diffs.append("Option --%s %sis `%s' in the new configuration" %
+ (name, "(= `%s') " % self.options[name] if self.options[name] else "", other.options[name]))
+ return diffs
+
def xrandr_version():
"Return the version of XRandR that this system uses"
return xrandr_version.version
+
def debug_regexp(pattern, string):
"Use the partial matching functionality of the regex module to display debug info on a non-matching regular expression"
try:
import regex
- bounds = ( 0, len(string) )
+ bounds = (0, len(string))
while bounds[0] != bounds[1]:
half = int((bounds[0] + bounds[1]) / 2)
if half == bounds[0]:
break
bounds = (half, bounds[1]) if regex.search(pattern, string[:half], partial=True) else (bounds[0], half - 1)
partial_length = bounds[0]
- return ("Regular expression matched until position "
- "%d, ..'%s', and did not match from '%s'.." % (partial_length, string[max(0, partial_length-20):partial_length],
- string[partial_length:partial_length+10]))
+ return ("Regular expression matched until position %d, ..'%s', and did not match from '%s'.." %
+ (partial_length, string[max(0, partial_length - 20):partial_length],
+ string[partial_length:partial_length + 10]))
except ImportError:
pass
- return "Debug information available if `regex' module is installed."
+ return "Debug information would be available if the `regex' module was installed."
+
def parse_xrandr_output():
"Parse the output of `xrandr --verbose' into a list of outputs"
xrandr_output = os.popen("xrandr -q --verbose").read()
if not xrandr_output:
- raise RuntimeError("Failed to run xrandr")
+ raise AutorandrException("Failed to run xrandr")
# We are not interested in screens
xrandr_output = re.sub("(?m)^Screen [0-9].+", "", xrandr_output).strip()
# Split at output boundaries and instanciate an XrandrOutput per output
split_xrandr_output = re.split("(?m)^([^ ]+ (?:(?:dis)?connected|unknown connection).*)$", xrandr_output)
if len(split_xrandr_output) < 2:
- raise RuntimeError("No output boundaries found")
+ raise AutorandrException("No output boundaries found", report_bug=True)
outputs = OrderedDict()
modes = OrderedDict()
for i in range(1, len(split_xrandr_output), 2):
output_name = split_xrandr_output[i].split()[0]
- output, output_modes = XrandrOutput.from_xrandr_output("".join(split_xrandr_output[i:i+2]))
+ output, output_modes = XrandrOutput.from_xrandr_output("".join(split_xrandr_output[i:i + 2]))
outputs[output_name] = output
if output_modes:
modes[output_name] = output_modes
return outputs, modes
+
def load_profiles(profile_path):
"Load the stored profiles"
profiles = {}
for profile in os.listdir(profile_path):
config_name = os.path.join(profile_path, profile, "config")
- setup_name = os.path.join(profile_path, profile, "setup")
+ setup_name = os.path.join(profile_path, profile, "setup")
if not os.path.isfile(config_name) or not os.path.isfile(setup_name):
continue
- edids = dict([ x.strip().split() for x in open(setup_name).readlines() if x.strip() ])
+ edids = dict([x.split() for x in (y.strip() for y in open(setup_name).readlines()) if x and x[0] != "#"])
config = {}
buffer = []
for line in chain(open(config_name).readlines(), ["output"]):
if line[:6] == "output" and buffer:
config[buffer[0].strip().split()[-1]] = XrandrOutput.from_config_file(edids, "".join(buffer))
- buffer = [ line ]
+ buffer = [line]
else:
buffer.append(line)
if config[output_name].edid is None:
del config[output_name]
- profiles[profile] = { "config": config, "path": os.path.join(profile_path, profile), "config-mtime": os.stat(config_name).st_mtime }
+ profiles[profile] = {
+ "config": config,
+ "path": os.path.join(profile_path, profile),
+ "config-mtime": os.stat(config_name).st_mtime,
+ }
return profiles
+
+def get_symlinks(profile_path):
+ "Load all symlinks from a directory"
+
+ symlinks = {}
+ for link in os.listdir(profile_path):
+ file_name = os.path.join(profile_path, link)
+ if os.path.islink(file_name):
+ symlinks[link] = os.readlink(file_name)
+
+ return symlinks
+
+
def find_profiles(current_config, profiles):
"Find profiles matching the currently connected outputs"
detected_profiles = []
if name not in current_config or not output.edid_equals(current_config[name]):
matches = False
break
- if not matches or any(( name not in config.keys() for name in current_config.keys() if current_config[name].edid )):
+ if not matches or any((name not in config.keys() for name in current_config.keys() if current_config[name].edid)):
continue
if matches:
detected_profiles.append(profile_name)
return detected_profiles
-def profile_blocked(profile_path):
- "Check if a profile is blocked"
- script = os.path.join(profile_path, "blocked")
- if not os.access(script, os.X_OK | os.F_OK):
- return False
- return subprocess.call(script) == 0
+
+def profile_blocked(profile_path, meta_information=None):
+ """Check if a profile is blocked.
+
+ meta_information is expected to be an dictionary. It will be passed to the block scripts
+ in the environment, as variables called AUTORANDR_<CAPITALIZED_KEY_HERE>.
+ """
+ return not exec_scripts(profile_path, "block", meta_information)
+
def output_configuration(configuration, config):
"Write a configuration file"
for output in outputs:
print(configuration[output].option_string, file=config)
+
def output_setup(configuration, setup):
"Write a setup (fingerprint) file"
outputs = sorted(configuration.keys())
if configuration[output].edid:
print(output, configuration[output].edid, file=setup)
+
def save_configuration(profile_path, configuration):
"Save a configuration into a profile"
if not os.path.isdir(profile_path):
with open(os.path.join(profile_path, "setup"), "w") as setup:
output_setup(configuration, setup)
+
def update_mtime(filename):
"Update a file's mtime"
try:
except:
return False
-def apply_configuration(configuration, dry_run=False):
+
+def call_and_retry(*args, **kwargs):
+ """Wrapper around subprocess.call that retries failed calls.
+
+ This function calls subprocess.call and on non-zero exit states,
+ waits a second and then retries once. This mitigates #47,
+ a timing issue with some drivers.
+ """
+ if "dry_run" in kwargs:
+ dry_run = kwargs["dry_run"]
+ del kwargs["dry_run"]
+ else:
+ dry_run = False
+ kwargs_redirected = dict(kwargs)
+ if not dry_run:
+ if hasattr(subprocess, "DEVNULL"):
+ kwargs_redirected["stdout"] = getattr(subprocess, "DEVNULL")
+ else:
+ kwargs_redirected["stdout"] = open(os.devnull, "w")
+ kwargs_redirected["stderr"] = kwargs_redirected["stdout"]
+ retval = subprocess.call(*args, **kwargs_redirected)
+ if retval != 0:
+ time.sleep(1)
+ retval = subprocess.call(*args, **kwargs)
+ return retval
+
+
+def apply_configuration(new_configuration, current_configuration, dry_run=False):
"Apply a configuration"
- outputs = sorted(configuration.keys(), key=lambda x: configuration[x].sort_key)
+ outputs = sorted(new_configuration.keys(), key=lambda x: new_configuration[x].sort_key)
if dry_run:
- base_argv = [ "echo", "xrandr" ]
+ base_argv = ["echo", "xrandr"]
else:
- base_argv = [ "xrandr" ]
+ base_argv = ["xrandr"]
# There are several xrandr / driver bugs we need to take care of here:
# - We cannot enable more than two screens at the same time
# a limit on the number of enabled screens
# - We must make sure that the screen at 0x0 is activated first,
# or the other (first) screen to be activated would be moved there.
-
+ # - If an active screen already has a transformation and remains active,
+ # the xrandr call fails with an invalid RRSetScreenSize parameter error.
+ # Update the configuration in 3 passes in that case. (On Haswell graphics,
+ # at least.)
+ # - Some implementations can not handle --transform at all, so avoid it unless
+ # necessary. (See https://github.com/phillipberndt/autorandr/issues/37)
+ # - Some implementations can not handle --panning without specifying --fb
+ # explicitly, so avoid it unless necessary.
+ # (See https://github.com/phillipberndt/autorandr/issues/72)
+
+ auxiliary_changes_pre = []
disable_outputs = []
enable_outputs = []
+ remain_active_count = 0
for output in outputs:
- if not configuration[output].edid or "off" in configuration[output].options:
- disable_outputs.append(configuration[output].option_vector)
+ if not new_configuration[output].edid or "off" in new_configuration[output].options:
+ disable_outputs.append(new_configuration[output].option_vector)
else:
- enable_outputs.append(configuration[output].option_vector)
-
- # Disable all but the last of the outputs to be disabled
- if len(disable_outputs) > 1:
- if subprocess.call(base_argv + list(chain.from_iterable(disable_outputs[:-1]))) != 0:
+ if "off" not in current_configuration[output].options:
+ remain_active_count += 1
+
+ option_vector = new_configuration[output].option_vector
+ if xrandr_version() >= Version("1.3.0"):
+ for option, off_value in (("transform", "none"), ("panning", "0x0")):
+ if option in current_configuration[output].options:
+ auxiliary_changes_pre.append(["--output", output, "--%s" % option, off_value])
+ else:
+ try:
+ option_index = option_vector.index("--%s" % option)
+ if option_vector[option_index + 1] == XrandrOutput.XRANDR_DEFAULTS[option]:
+ option_vector = option_vector[:option_index] + option_vector[option_index + 2:]
+ except ValueError:
+ pass
+
+ enable_outputs.append(option_vector)
+
+ # Perform pe-change auxiliary changes
+ if auxiliary_changes_pre:
+ argv = base_argv + list(chain.from_iterable(auxiliary_changes_pre))
+ if call_and_retry(argv, dry_run=dry_run) != 0:
+ raise AutorandrException("Command failed: %s" % " ".join(argv))
+
+ # Disable unused outputs, but make sure that there always is at least one active screen
+ disable_keep = 0 if remain_active_count else 1
+ if len(disable_outputs) > disable_keep:
+ argv = base_argv + list(chain.from_iterable(disable_outputs[:-1] if disable_keep else disable_outputs))
+ if call_and_retry(argv, dry_run=dry_run) != 0:
# Disabling the outputs failed. Retry with the next command:
# Sometimes disabling of outputs fails due to an invalid RRSetScreenSize.
# This does not occur if simultaneously the primary screen is reset.
pass
else:
- disable_outputs = disable_outputs[-1:]
+ disable_outputs = disable_outputs[-1:] if disable_keep else []
+
+ # If disable_outputs still has more than one output in it, one of the xrandr-calls below would
+ # disable the last two screens. This is a problem, so if this would happen, instead disable only
+ # one screen in the first call below.
+ if len(disable_outputs) > 0 and len(disable_outputs) % 2 == 0:
+ # In the context of a xrandr call that changes the display state, `--query' should do nothing
+ disable_outputs.insert(0, ['--query'])
# Enable the remaining outputs in pairs of two operations
operations = disable_outputs + enable_outputs
for index in range(0, len(operations), 2):
- argv = base_argv + list(chain.from_iterable(operations[index:index+2]))
- if subprocess.call(argv) != 0:
- raise RuntimeError("Command failed: %s" % " ".join(argv))
+ argv = base_argv + list(chain.from_iterable(operations[index:index + 2]))
+ if call_and_retry(argv, dry_run=dry_run) != 0:
+ raise AutorandrException("Command failed: %s" % " ".join(argv))
+
+
+def is_equal_configuration(source_configuration, target_configuration):
+ "Check if all outputs from target are already configured correctly in source"
+ for output in target_configuration.keys():
+ if (output not in source_configuration) or (source_configuration[output] != target_configuration[output]):
+ return False
+ return True
+
def add_unused_outputs(source_configuration, target_configuration):
"Add outputs that are missing in target to target, in 'off' state"
for output_name, output in source_configuration.items():
if output_name not in target_configuration:
- target_configuration[output_name] = XrandrOutput(output_name, output.edid, { "off": None })
+ target_configuration[output_name] = XrandrOutput(output_name, output.edid, {"off": None})
+
def remove_irrelevant_outputs(source_configuration, target_configuration):
"Remove outputs from target that ought to be 'off' and already are"
for output_name, output in source_configuration.items():
- if "off" in output.options and output_name in target_configuration and "off" in target_configuration[output_name].options:
- del target_configuration[output_name]
+ if "off" in output.options:
+ if output_name in target_configuration:
+ if "off" in target_configuration[output_name].options:
+ del target_configuration[output_name]
+
def generate_virtual_profile(configuration, modes, profile_name):
"Generate one of the virtual profiles"
configuration = copy.deepcopy(configuration)
if profile_name == "common":
- common_resolution = [ set(( ( mode["width"], mode["height"] ) for mode in output )) for output in modes.values() ]
- common_resolution = reduce(lambda a, b: a & b, common_resolution[1:], common_resolution[0])
- common_resolution = sorted(common_resolution, key=lambda a: int(a[0])*int(a[1]))
+ mode_sets = []
+ for output, output_modes in modes.items():
+ mode_set = set()
+ if configuration[output].edid:
+ for mode in output_modes:
+ mode_set.add((mode["width"], mode["height"]))
+ mode_sets.append(mode_set)
+ common_resolution = reduce(lambda a, b: a & b, mode_sets[1:], mode_sets[0])
+ common_resolution = sorted(common_resolution, key=lambda a: int(a[0]) * int(a[1]))
if common_resolution:
for output in configuration:
configuration[output].options = {}
- if output in modes:
- configuration[output].options["mode"] = "%sx%s" % common_resolution[-1]
+ if output in modes and configuration[output].edid:
+ modes_sorted = sorted(modes[output], key=lambda x: 0 if x["preferred"] else 1)
+ modes_filtered = [x for x in modes_sorted if (x["width"], x["height"]) == common_resolution[-1]]
+ mode = modes_filtered[0]
+ configuration[output].options["mode"] = mode['name']
configuration[output].options["pos"] = "0x0"
else:
configuration[output].options["off"] = None
for output in configuration:
configuration[output].options = {}
- if output in modes:
- mode = sorted(modes[output], key=lambda a: int(a["width"])*int(a["height"]) + (10**6 if a["preferred"] else 0))[-1]
- configuration[output].options["mode"] = "%sx%s" % (mode["width"], mode["height"])
+ if output in modes and configuration[output].edid:
+ def key(a, b):
+ score = int(a["width"]) * int(a["height"])
+ if a["preferred"]:
+ score += 10**6
+ return score
+ modes = sorted(modes[output], key=key)
+ mode = modes[-1]
+ configuration[output].options["mode"] = mode["name"]
configuration[output].options["rate"] = mode["rate"]
configuration[output].options["pos"] = pos_specifier % shift
shift += int(mode[shift_index])
else:
configuration[output].options["off"] = None
+ elif profile_name == "clone-largest":
+ modes_unsorted = [output_modes[0] for output, output_modes in modes.items()]
+ modes_sorted = sorted(modes_unsorted, key=lambda x: int(x["width"]) * int(x["height"]), reverse=True)
+ biggest_resolution = modes_sorted[0]
+ for output in configuration:
+ configuration[output].options = {}
+ if output in modes and configuration[output].edid:
+ def key(a, b):
+ score = int(a["width"]) * int(a["height"])
+ if a["preferred"]:
+ score += 10**6
+ return score
+ modes = sorted(modes[output], key=key)
+ mode = modes[-1]
+ configuration[output].options["mode"] = mode["name"]
+ configuration[output].options["rate"] = mode["rate"]
+ configuration[output].options["pos"] = "0x0"
+ scale = max(float(biggest_resolution["width"]) / float(mode["width"]),
+ float(biggest_resolution["height"]) / float(mode["height"]))
+ mov_x = (float(mode["width"]) * scale - float(biggest_resolution["width"])) / -2
+ mov_y = (float(mode["height"]) * scale - float(biggest_resolution["height"])) / -2
+ configuration[output].options["transform"] = "{},0,{},0,{},{},0,0,1".format(scale, mov_x, scale, mov_y)
+ else:
+ configuration[output].options["off"] = None
return configuration
+
+def print_profile_differences(one, another):
+ "Print the differences between two profiles for debugging"
+ if one == another:
+ return
+ print("| Differences between the two profiles:", file=sys.stderr)
+ for output in set(chain.from_iterable((one.keys(), another.keys()))):
+ if output not in one:
+ if "off" not in another[output].options:
+ print("| Output `%s' is missing from the active configuration" % output, file=sys.stderr)
+ elif output not in another:
+ if "off" not in one[output].options:
+ print("| Output `%s' is missing from the new configuration" % output, file=sys.stderr)
+ else:
+ for line in one[output].verbose_diff(another[output]):
+ print("| [Output %s] %s" % (output, line), file=sys.stderr)
+ print("\\-", file=sys.stderr)
+
+
def exit_help():
"Print help and exit"
print(help_text)
for profile in virtual_profiles:
- print(" %-10s %s" % profile[:2])
+ name, description = profile[:2]
+ description = [description]
+ max_width = 78 - 18
+ while len(description[0]) > max_width + 1:
+ left_over = description[0][max_width:]
+ description[0] = description[0][:max_width] + "-"
+ description.insert(1, " %-15s %s" % ("", left_over))
+ description = "\n".join(description)
+ print(" %-15s %s" % (name, description))
sys.exit(0)
-def exec_scripts(profile_path, script_name):
- "Run userscripts"
- for script in (os.path.join(profile_path, script_name), os.path.join(os.path.dirname(profile_path), script_name)):
- if os.access(script, os.X_OK | os.F_OK):
- subprocess.call(script)
+
+def exec_scripts(profile_path, script_name, meta_information=None):
+ """"Run userscripts
+
+ This will run all executables from the profile folder, and global per-user
+ and system-wide configuration folders, named script_name or residing in
+ subdirectories named script_name.d.
+
+ If profile_path is None, only global scripts will be invoked.
+
+ meta_information is expected to be an dictionary. It will be passed to the block scripts
+ in the environment, as variables called AUTORANDR_<CAPITALIZED_KEY_HERE>.
+
+ Returns True unless any of the scripts exited with non-zero exit status.
+ """
+ all_ok = True
+ env = os.environ.copy()
+ if meta_information:
+ for key, value in meta_information.items():
+ env["AUTORANDR_{}".format(key.upper())] = str(value)
+
+ # If there are multiple candidates, the XDG spec tells to only use the first one.
+ ran_scripts = set()
+
+ user_profile_path = os.path.expanduser("~/.autorandr")
+ if not os.path.isdir(user_profile_path):
+ user_profile_path = os.path.join(os.environ.get("XDG_CONFIG_HOME", os.path.expanduser("~/.config")), "autorandr")
+
+ candidate_directories = [user_profile_path]
+ for config_dir in os.environ.get("XDG_CONFIG_DIRS", "/etc/xdg").split(":"):
+ candidate_directories.append(os.path.join(config_dir, "autorandr"))
+ if profile_path:
+ candidate_directories.append(profile_path)
+
+ for folder in candidate_directories:
+ if script_name not in ran_scripts:
+ script = os.path.join(folder, script_name)
+ if os.access(script, os.X_OK | os.F_OK):
+ try:
+ all_ok &= subprocess.call(script, env=env) != 0
+ except:
+ raise AutorandrException("Failed to execute user command: %s" % (script,))
+ ran_scripts.add(script_name)
+
+ script_folder = os.path.join(folder, "%s.d" % script_name)
+ if os.access(script_folder, os.R_OK | os.X_OK) and os.path.isdir(script_folder):
+ for file_name in os.listdir(script_folder):
+ check_name = "d/%s" % (file_name,)
+ if check_name not in ran_scripts:
+ script = os.path.join(script_folder, file_name)
+ if os.access(script, os.X_OK | os.F_OK):
+ try:
+ all_ok &= subprocess.call(script, env=env) != 0
+ except:
+ raise AutorandrException("Failed to execute user command: %s" % (script,))
+ ran_scripts.add(check_name)
+
+ return all_ok
+
+
+def dispatch_call_to_sessions(argv):
+ """Invoke autorandr for each open local X11 session with the given options.
+
+ The function iterates over all processes not owned by root and checks
+ whether they have DISPLAY and XAUTHORITY variables set. It strips the
+ screen from any variable it finds (i.e. :0.0 becomes :0) and checks whether
+ this display has been handled already. If it has not, it forks, changes
+ uid/gid to the user owning the process, reuses the process's environment
+ and runs autorandr with the parameters from argv.
+
+ This function requires root permissions. It only works for X11 servers that
+ have at least one non-root process running. It is susceptible for attacks
+ where one user runs a process with another user's DISPLAY variable - in
+ this case, it might happen that autorandr is invoked for the other user,
+ which won't work. Since no other harm than prevention of automated
+ execution of autorandr can be done this way, the assumption is that in this
+ situation, the local administrator will handle the situation."""
+
+ X11_displays_done = set()
+
+ autorandr_binary = os.path.abspath(argv[0])
+ backup_candidates = {}
+
+ def fork_child_autorandr(pwent, process_environ):
+ print("Running autorandr as %s for display %s" % (pwent.pw_name, process_environ["DISPLAY"]))
+ child_pid = os.fork()
+ if child_pid == 0:
+ # This will throw an exception if any of the privilege changes fails,
+ # so it should be safe. Also, note that since the environment
+ # is taken from a process owned by the user, reusing it should
+ # not leak any information.
+ os.setgroups([])
+ os.setresgid(pwent.pw_gid, pwent.pw_gid, pwent.pw_gid)
+ os.setresuid(pwent.pw_uid, pwent.pw_uid, pwent.pw_uid)
+ os.chdir(pwent.pw_dir)
+ os.environ.clear()
+ os.environ.update(process_environ)
+ os.execl(autorandr_binary, autorandr_binary, *argv[1:])
+ os.exit(1)
+ os.waitpid(child_pid, 0)
+
+ for directory in os.listdir("/proc"):
+ directory = os.path.join("/proc/", directory)
+ if not os.path.isdir(directory):
+ continue
+ environ_file = os.path.join(directory, "environ")
+ if not os.path.isfile(environ_file):
+ continue
+ uid = os.stat(environ_file).st_uid
+
+ # The following line assumes that user accounts start at 1000 and that
+ # no one works using the root or another system account. This is rather
+ # restrictive, but de facto default. Alternatives would be to use the
+ # UID_MIN from /etc/login.defs or FIRST_UID from /etc/adduser.conf;
+ # but effectively, both values aren't binding in any way.
+ # If this breaks your use case, please file a bug on Github.
+ if uid < 1000:
+ continue
+
+ process_environ = {}
+ for environ_entry in open(environ_file).read().split("\0"):
+ name, sep, value = environ_entry.partition("=")
+ if name and sep:
+ if name == "DISPLAY" and "." in value:
+ value = value[:value.find(".")]
+ process_environ[name] = value
+
+ if "DISPLAY" not in process_environ:
+ # Cannot work with this environment, skip.
+ continue
+
+ # To allow scripts to detect batch invocation (especially useful for predetect)
+ process_environ["AUTORANDR_BATCH_PID"] = str(os.getpid())
+ process_environ["UID"] = str(uid)
+
+ display = process_environ["DISPLAY"]
+
+ if "XAUTHORITY" not in process_environ:
+ # It's very likely that we cannot work with this environment either,
+ # but keep it as a backup just in case we don't find anything else.
+ backup_candidates[display] = process_environ
+ continue
+
+ if display not in X11_displays_done:
+ try:
+ pwent = pwd.getpwuid(uid)
+ except KeyError:
+ # User has no pwd entry
+ continue
+
+ fork_child_autorandr(pwent, process_environ)
+ X11_displays_done.add(display)
+
+ # Run autorandr for any users/displays which didn't have a process with
+ # XAUTHORITY set.
+ for display, process_environ in backup_candidates.items():
+ if display not in X11_displays_done:
+ try:
+ pwent = pwd.getpwuid(int(process_environ["UID"]))
+ except KeyError:
+ # User has no pwd entry
+ continue
+
+ fork_child_autorandr(pwent, process_environ)
+ X11_displays_done.add(display)
+
def main(argv):
try:
- options = dict(getopt.getopt(argv[1:], "s:l:d:cfh", [ "dry-run", "change", "default=", "save=", "load=", "force", "fingerprint", "config", "help" ])[0])
+ opts, args = getopt.getopt(argv[1:], "s:r:l:d:cfh",
+ ["batch", "dry-run", "change", "default=", "save=", "remove=", "load=",
+ "force", "fingerprint", "config", "debug", "skip-options=", "help"])
except getopt.GetoptError as e:
- print(str(e))
- options = { "--help": True }
+ print("Failed to parse options: {0}.\n"
+ "Use --help to get usage information.".format(str(e)),
+ file=sys.stderr)
+ sys.exit(posix.EX_USAGE)
+
+ options = dict(opts)
+
+ if "-h" in options or "--help" in options:
+ exit_help()
+
+ # Batch mode
+ if "--batch" in options:
+ if ("DISPLAY" not in os.environ or not os.environ["DISPLAY"]) and os.getuid() == 0:
+ dispatch_call_to_sessions([x for x in argv if x != "--batch"])
+ else:
+ print("--batch mode can only be used by root and if $DISPLAY is unset")
+ return
+ if "AUTORANDR_BATCH_PID" in os.environ:
+ user = pwd.getpwuid(os.getuid())
+ user = user.pw_name if user else "#%d" % os.getuid()
+ print("autorandr running as user %s (started from batch instance)" % user)
profiles = {}
+ profile_symlinks = {}
try:
# Load profiles from each XDG config directory
- for directory in os.environ.get("XDG_CONFIG_DIRS", "").split(":"):
+ # The XDG spec says that earlier entries should take precedence, so reverse the order
+ for directory in reversed(os.environ.get("XDG_CONFIG_DIRS", "/etc/xdg").split(":")):
system_profile_path = os.path.join(directory, "autorandr")
if os.path.isdir(system_profile_path):
profiles.update(load_profiles(system_profile_path))
+ profile_symlinks.update(get_symlinks(system_profile_path))
# For the user's profiles, prefer the legacy ~/.autorandr if it already exists
# profile_path is also used later on to store configurations
profile_path = os.path.expanduser("~/.autorandr")
profile_path = os.path.join(os.environ.get("XDG_CONFIG_HOME", os.path.expanduser("~/.config")), "autorandr")
if os.path.isdir(profile_path):
profiles.update(load_profiles(profile_path))
+ profile_symlinks.update(get_symlinks(profile_path))
# Sort by descending mtime
profiles = OrderedDict(sorted(profiles.items(), key=lambda x: -x[1]["config-mtime"]))
except Exception as e:
- print("Failed to load profiles:\n%s" % str(e), file=sys.stderr)
- sys.exit(1)
+ raise AutorandrException("Failed to load profiles", e)
- try:
- config, modes = parse_xrandr_output()
- except Exception as e:
- print("Failed to parse current configuration from XRandR:\n%s" % str(e), file=sys.stderr)
- sys.exit(1)
+ profile_symlinks = {k: v for k, v in profile_symlinks.items() if v in (x[0] for x in virtual_profiles) or v in profiles}
+
+ exec_scripts(None, "predetect")
+ config, modes = parse_xrandr_output()
if "--fingerprint" in options:
output_setup(config, sys.stdout)
output_configuration(config, sys.stdout)
sys.exit(0)
+ if "--skip-options" in options:
+ skip_options = [y[2:] if y[:2] == "--" else y for y in (x.strip() for x in options["--skip-options"].split(","))]
+ for profile in profiles.values():
+ for output in profile["config"].values():
+ output.set_ignored_options(skip_options)
+ for output in config.values():
+ output.set_ignored_options(skip_options)
+
if "-s" in options:
options["--save"] = options["-s"]
if "--save" in options:
- if options["--save"] in ( x[0] for x in virtual_profiles ):
- print("Cannot save current configuration as profile '%s':\nThis configuration name is a reserved virtual configuration." % options["--save"])
- sys.exit(1)
+ if options["--save"] in (x[0] for x in virtual_profiles):
+ raise AutorandrException("Cannot save current configuration as profile '%s':\n"
+ "This configuration name is a reserved virtual configuration." % options["--save"])
try:
- save_configuration(os.path.join(profile_path, options["--save"]), config)
+ profile_folder = os.path.join(profile_path, options["--save"])
+ save_configuration(profile_folder, config)
+ exec_scripts(profile_folder, "postsave", {"CURRENT_PROFILE": options["--save"], "PROFILE_FOLDER": profile_folder})
except Exception as e:
- print("Failed to save current configuration as profile '%s':\n%s" % (options["--save"], str(e)), file=sys.stderr)
- sys.exit(1)
+ raise AutorandrException("Failed to save current configuration as profile '%s'" % (options["--save"],), e)
print("Saved current configuration as profile '%s'" % options["--save"])
sys.exit(0)
- if "-h" in options or "--help" in options:
- exit_help()
+ if "-r" in options:
+ options["--remove"] = options["-r"]
+ if "--remove" in options:
+ if options["--remove"] in (x[0] for x in virtual_profiles):
+ raise AutorandrException("Cannot remove profile '%s':\n"
+ "This configuration name is a reserved virtual configuration." % options["--remove"])
+ if options["--remove"] not in profiles.keys():
+ raise AutorandrException("Cannot remove profile '%s':\n"
+ "This profile does not exist." % options["--remove"])
+ try:
+ remove = True
+ profile_folder = os.path.join(profile_path, options["--remove"])
+ profile_dirlist = os.listdir(profile_folder)
+ profile_dirlist.remove("config")
+ profile_dirlist.remove("setup")
+ if profile_dirlist:
+ print("Profile folder '%s' contains the following additional files:\n"
+ "---\n%s\n---" % (options["--remove"], "\n".join(profile_dirlist)))
+ response = input("Do you really want to remove profile '%s'? If so, type 'yes': " % options["--remove"]).strip()
+ if response != "yes":
+ remove = False
+ if remove is True:
+ shutil.rmtree(profile_folder)
+ print("Removed profile '%s'" % options["--remove"])
+ else:
+ print("Profile '%s' was not removed" % options["--remove"])
+ except Exception as e:
+ raise AutorandrException("Failed to remove profile '%s'" % (options["--remove"],), e)
+ sys.exit(0)
detected_profiles = find_profiles(config, profiles)
load_profile = False
options["--load"] = options["-l"]
if "--load" in options:
load_profile = options["--load"]
+ elif len(args) == 1:
+ load_profile = args[0]
else:
+ # Find the active profile(s) first, for the block script (See #42)
+ current_profiles = []
+ for profile_name in profiles.keys():
+ configs_are_equal = is_equal_configuration(config, profiles[profile_name]["config"])
+ if configs_are_equal:
+ current_profiles.append(profile_name)
+ block_script_metadata = {
+ "CURRENT_PROFILE": "".join(current_profiles[:1]),
+ "CURRENT_PROFILES": ":".join(current_profiles)
+ }
+
for profile_name in profiles.keys():
- if profile_blocked(os.path.join(profile_path, profile_name)):
+ if profile_blocked(os.path.join(profile_path, profile_name), block_script_metadata):
print("%s (blocked)" % profile_name, file=sys.stderr)
continue
+ props = []
if profile_name in detected_profiles:
- print("%s (detected)" % profile_name, file=sys.stderr)
+ props.append("(detected)")
if ("-c" in options or "--change" in options) and not load_profile:
load_profile = profile_name
- else:
- print(profile_name, file=sys.stderr)
+ if profile_name in current_profiles:
+ props.append("(current)")
+ print("%s%s%s" % (profile_name, " " if props else "", " ".join(props)), file=sys.stderr)
+ if not configs_are_equal and "--debug" in options and profile_name in detected_profiles:
+ print_profile_differences(config, profiles[profile_name]["config"])
if "-d" in options:
options["--default"] = options["-d"]
load_profile = options["--default"]
if load_profile:
- if load_profile in ( x[0] for x in virtual_profiles ):
+ if load_profile in profile_symlinks:
+ if "--debug" in options:
+ print("'%s' symlinked to '%s'" % (load_profile, profile_symlinks[load_profile]))
+ load_profile = profile_symlinks[load_profile]
+
+ if load_profile in (x[0] for x in virtual_profiles):
load_config = generate_virtual_profile(config, modes, load_profile)
scripts_path = os.path.join(profile_path, load_profile)
else:
load_config = profile["config"]
scripts_path = profile["path"]
except KeyError:
- print("Failed to load profile '%s':\nProfile not found" % load_profile, file=sys.stderr)
- sys.exit(1)
+ raise AutorandrException("Failed to load profile '%s': Profile not found" % load_profile)
if load_profile in detected_profiles and detected_profiles[0] != load_profile:
update_mtime(os.path.join(scripts_path, "config"))
add_unused_outputs(config, load_config)
- if load_config == dict(config) and not "-f" in options and not "--force" in options:
+ if load_config == dict(config) and "-f" not in options and "--force" not in options:
print("Config already loaded", file=sys.stderr)
sys.exit(0)
+ if "--debug" in options and load_config != dict(config):
+ print("Loading profile '%s'" % load_profile)
+ print_profile_differences(config, load_config)
+
remove_irrelevant_outputs(config, load_config)
try:
if "--dry-run" in options:
- apply_configuration(load_config, True)
+ apply_configuration(load_config, config, True)
else:
- exec_scripts(scripts_path, "preswitch")
- apply_configuration(load_config, False)
- exec_scripts(scripts_path, "postswitch")
+ script_metadata = {
+ "CURRENT_PROFILE": load_profile,
+ "PROFILE_FOLDER": scripts_path,
+ }
+ exec_scripts(scripts_path, "preswitch", script_metadata)
+ if "--debug" in options:
+ print("Going to run:")
+ apply_configuration(load_config, config, True)
+ apply_configuration(load_config, config, False)
+ exec_scripts(scripts_path, "postswitch", script_metadata)
+ except AutorandrException as e:
+ raise AutorandrException("Failed to apply profile '%s'" % load_profile, e, e.report_bug)
except Exception as e:
- print("Failed to apply profile '%s':\n%s" % (load_profile, str(e)), file=sys.stderr)
- sys.exit(1)
+ raise AutorandrException("Failed to apply profile '%s'" % load_profile, e, True)
+
+ if "--dry-run" not in options and "--debug" in options:
+ new_config, _ = parse_xrandr_output()
+ if not is_equal_configuration(new_config, load_config):
+ print("The configuration change did not go as expected:")
+ print_profile_differences(new_config, load_config)
sys.exit(0)
-if __name__ == '__main__':
+
+def exception_handled_main(argv=sys.argv):
try:
main(sys.argv)
- except Exception as e:
- print("General failure. Please report this as a bug:\n%s" % (str(e),), file=sys.stderr)
+ except AutorandrException as e:
+ print(e, file=sys.stderr)
sys.exit(1)
+ except Exception as e:
+ if not len(str(e)): # BdbQuit
+ print("Exception: {0}".format(e.__class__.__name__))
+ sys.exit(2)
+
+ print("Unhandled exception ({0}). Please report this as a bug at "
+ "https://github.com/phillipberndt/autorandr/issues.".format(e),
+ file=sys.stderr)
+ raise
+
+
+if __name__ == '__main__':
+ exception_handled_main()