-TITLE INFORMATION: INSTALL - compiling and installing GNU LilyPond
-AUTHOR INFORMATION: HWN & JCN
-Contents
+INSTALL - compiling and installing GNU LilyPond
+***********************************************
-1: ABSTRACT
-2: PREREQUISITES
-3: RUNNING
-4: RECOMMENDED
-5: WEBSITE
-6: CONFIGURING and COMPILING
-7: CONFIGURING FOR MULTIPLE PLATFORMS
-8: INSTALLING
-9: REDHAT LINUX
-10: DEBIAN GNU/LINUX
-11: WINDOWS NT/95
-12: AUTHORS
+Obtaining
+=========
-1: ABSTRACT
+ You can get the latest version of LilyPond at
+ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/
+(ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/).
-You do something which looks remotely like
+ _If you upgrade by patching do remember to rerun autoconf after
+applying the patch_.
- configure # Check out the buildscripts/set-lily.sh script
- make
- make install
+ If you do not want to download the entire archive for each version,
+the safest method for upgrading is to use `xdelta', see
+`ftp://ftp.xcf.berkeley.edu/pub/xdelta/'.
-The detailed instructions follow here. The
-buildscripts/set-lily.sh script sets some environment variables
-and symlinks, which comes in handly when you have to compile LilyPond
-very often. It is aimed at people who run (or debug) LilyPond without
-installing.
+ The following command produces `lilypond-1.1.55.tar.gz' from
+`lilypond-1.1.54' identical (up to compression dates) to the .55 on the
+FTP site.
+ xdelta patch lilypond-1.1.54-1.1.55.xd lilypond-1.1.54.tar.gz
-2: PREREQUISITES
+Prerequisites
+=============
-For compilation you need:
+ For compilation you need:
-o A GNU system: GNU LilyPond is known to run on these GNU systems: Linux
- (PPC, intel), FreeBSD, AIX, NeXTStep, IRIX, Digital Unix and
-Solaris.
+ * A GNU system: GNU LilyPond is known to run on these GNU systems:
+ Linux (PPC, intel), FreeBSD, AIX, NeXTStep, IRIX, Digital Unix
+ and Solaris.
-o Lots of disk space: LilyPond takes between 50 and 100 mb to
-compile if you use debugging information. If you are short on
-disk-space run configure with --disable-debugging.
+ * Lots of disk space: LilyPond takes between 30 and 100 mb to
+ compile if you use debugging information. If you are short on
+ disk-space run configure with `--disable-debugging'.
-Although we recommend to use Unix, LilyPond is known to run on Windows
-NT/95/98 as well. See Section [w32].
+ * Although we recommend to use Unix, LilyPond is known to run on
+ Windows NT/95/98 as well. See Section Windows NT/95,es.
-o GNU C++ version 2.7 or newer (2.8 and egcs are also fine).
-o Python 1.5 (Strictly speaking, you shouldn't need Python for
- compiling and installing, but you'll need it to regenerate the font
- tables, e.g.).
+ * A reasonable C++ compiler: EGCS 1.1, GCC 2.95.2 or newer. Check
+ out `ftp://ftp.gnu.org/gnu/gcc/'.
-3: RUNNING
+ * Python 1.5, Check out `ftp://ftp.python.org' or
+ `ftp://ftp.cwi.nl/pub/python'.
-GNU LilyPond does use a lot of resources. For operation you need the following:
+ * GUILE 1.3.4 or newer, check out
+ http://www.gnu.org/software/guile/guile.html
+ (http://www.gnu.org/software/guile/guile.html). Version 1.4 is
+ recommended for better performance.
-o TeX
-o A PostScript printer and/or viewer (such as Ghostscript) is strongly
- recommended. Xdvi will show all embedded PostScript too if you have
- Ghostscript installed.
+ * GNU Make. Check out ftp://ftp.gnu.org/gnu/make/
+ (ftp://ftp.gnu.org/gnu/make/).
-4: RECOMMENDED
+ * Flex (version 2.5.4a or newer). Check out
+ ftp://ftp.gnu.org/gnu/flex/ (ftp://ftp.gnu.org/gnu/flex/).
-Although not strictly necessary, these are recommended to have.
+ * Bison (version 1.25 or newer). Check out
+ ftp://ftp.gnu.org/gnu/bison/ (ftp://ftp.gnu.org/gnu/bison/).
-o GNU make.
-Check out ftp://ftp.gnu.org
-or any mirror of this site.
+ * TeX. If you want LilyPond to use kpathsea support (recommended),
+ make sure you have tetex 1.0 or newer (1.0.6 is known to work).
+ You may need to install a tetex-devel or tetex-dev package too.
-o Flex (version 2.5.4 or newer).
-Check out ftp://ftp.gnu.org
-or any mirror of this site.
-o Bison (version 1.25 or newer).
-Check out ftp://ftp.gnu.org
-or any mirror of this site.
+ * Texinfo (version 4.0 or newer). Check out
+ ftp://ftp.gnu.org/gnu/texinfo/ (ftp://ftp.gnu.org/gnu/texinfo/).
+ Most documentation is in texinfo.
-o Python (version 1.5 or newer). Check out
-ftp://ftp.python.org or ftp://ftp.cwi.nl/pub/python.
+ * The geometry package for LaTeX is needed to use ly2dvi. Available
+ at
+ ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry
+ (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry)
+ or at mirror site ftp://ftp.dante.de (ftp://ftp.dante.de)
-o Yodl. All documentation will be in Yodl. (1.30.17)
-ftp://pcnov095.win.tue.nl/pub/yodl
- http://www.cs.uu.nl/~hanwen/yodl
-o Texinfo. (version 3.12 or newer)
+ * MetaPost, needed for generating PostScript fonts. Please note that
+ tetex-0.4pl8 (included with Redhat 5.x) does not include
+ `mfplain.mp', which is needed for producing the scalable font
+ files.
-o GNU find
-Check out ftp://ftp.gnu.org
-or any mirror of this site
+ If you do not want to use PostScript output, edit `mf/GNUmakefile',
+ removing the line saying `PFA_FILES='
-o A fast computer (a full page of music typically takes 1 minute on my
- 486/133, using the --enable-checking compile. It's lot slower than
- most MusiXTeX preprocessors)
+ * kpathsea, a library for searching (TeX) files. `kpathsea' is
+ usually included with your installation of TeX.
-5: WEBSITE
-If you want to auto-generate Lily's website, you'll need some additional
-conversion tools.
+Running
+=======
-o xpmtoppm (from the Portable Bitmap Utilities) (For RedHat Linux
- users: it is included within the package libgr-progs).
-o Bib2html http://pertsserver.cs.uiuc.edu/~hull/bib2html.
- Which, in turn depends on man2html for proper installation.
-man2html can be had from http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05.
+ GNU LilyPond does use a lot of resources. For operation you need the
+following software
- TeTeX users should not forget to rerun texhash.
+ * TeX.
-6: CONFIGURING and COMPILING
+ * A PostScript printer and/or viewer (such as Ghostscript) is
+ strongly recommended. Xdvi will show all embedded PostScript
+ too if you have Ghostscript installed.
-to install GNU LilyPond, simply type:
+ * GUILE 1.3.4, or newer. Check out
+ http://www.gnu.org/software/guile/
+ (http://www.gnu.org/programs/guile.html)
- configure --enable-tex-dir=XXXX --enable-mf-dir=YYYY
- make
- make install
+ For running LilyPond successfully you have to help TeX and MetaFont
+find various files. The recommended way of doing so is adjusting the
+environment variables in the start-up scripts of your shell. Appropriate
+Csh and sh scripts are left in `buildscripts/out/lilypond-profile' and
+`buildscripts/out/lilypond-login' after compilation.
-This will install a number of files, something close to:
+ The empty path component represents TeX and MetaFont's default search
+paths. Scripts with the proper paths for the bourne and C-shell
+respectively are generated in `buildscripts/out/lilypond-profile' and
+`buildscripts/out/lilypond-login' during compilation.
- /usr/local/man/man1/mi2mu.1
- /usr/local/man/man1/convert-mudela.1
- /usr/local/man/man1/mudela-book.1
- /usr/local/man/man1/lilypond.1
- /usr/local/bin/lilypond
- /usr/local/bin/mi2mu
- /usr/local/share/lilypond/*
- /usr/local/share/locale/{it,nl}/LC_MESSAGES/lilypond.mo
- /usr/lib/texmf/texmf/tex/lilypond/*
+ LilyPond is a big and slow program. A fast CPU and plenty of RAM is
+recommended for comfortable use.
-You should specify directories that are in TeX's and MetaFont's
-include path with the options (--enable-tex-dir) and
---enable-mf-dir. If you don't specify any directories, the TeX
-include directory is detected dynamically, which is unreliable. The
-above assumes that you are root and have the GNU development tools,
-and your make is GNU make. If this is not the case, you can adjust
-your environment variables to your taste:
+Website
+=======
- export CPPFLAGS="-I /home/me/my_include -DWEIRD_FOOBAR"
- configure
+ The website is the most convenient form to use for reading the
+documentation on-line documentation. It is made by entering
-CPPFLAGS are the preprocessor flags.
+ make htmldoc
+ This does require a functioning LilyPond. The binary doesn't have
+to be installed.
-The configure script is Cygnus configure, and it will accept
---help. If you are not root, you will probably have to make it
-with a different --prefix option. Our favourite location is
+ If you want to auto-generate Lily's website, you'll need some
+additional conversion tools.
- configure --prefix=$HOME/usr
+ * xpmtoppm (from the netpbm package: the Portable Bitmap Utilities)
+ (For RedHat Linux users: it is included within the package
+ libgr-progs). the original is at
+ ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz
+ (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)
-In this case, you will have to set up MFINPUTS, and TEXINPUTS accordingly.
+ * pnmtopng (also in libgr-progs for RedHat). The original is at
+ ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz
+ (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).i
-If you want to install GNU LilyPond in /usr/local, and your TeX has
-no default hooks for local stuff, you can do:
+ The version of `pnmtopng' that is distributed with RedHat 5.1 and
+ 5.2 contains a bug: pnmtopng is dynamically linked to the wrong
+ version of libpng.
- configure --prefix=/usr/local --enable-tex-prefix=/usr/lib/texmf
+ * Bibtex2html (http://www.lri.fr/~filliatr/ftp/bibtex2html/), or
+ Bib2html (http://www.uni-koblenz.de/ag-ki/ftp/bib2html/).
+ Bibtex2html is available in debian, while bib2html is in some rpm
+ based distributions. Bib2html, in turn depends on man2html for
+ proper installation. man2html can be had from
+ http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05
+ (http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05).
-Since GNU LilyPond currently is beta, you are advised to also use
+ The website will build without bib converter utility, but you will
+ not see our hypertextified bibliography.
- --enable-debugging
- --enable-checking
-Other options include:
+Configuring and compiling
+=========================
-o --enable-shared
- Make a shared library (gnu/linux, solaris (?) only ) (TEMPORARILY
-OUT OF ORDER)
+ to install GNU LilyPond, simply type:
+ gunzip -c lilypond-x.y.z | tar xf -
+ cd lilypond-x.y.z
+ ./configure # fill in your standard prefix with --prefix
+ make
+ make install
-o --enable-printing
- Enable debugging print routines (lilypond -D option)
-o --enable-optimise
- Set maximum optimisation: compile with -O2
-o --enable-profiling
- Compile with support for profiling.
-o --enable-tex-prefix
- Set the directory where TeX and Metafont live.
-o --enable-tex-dir
- Set then directory TeX input is in (detected as a subdir of
- tex-prefix). This should be a directory that is reachable both for
- tex and latex. On my system the best choice would be
- /usr/lib/texmf/texmf/tex/generic//.
-o --enable-mf-dir
- Set the directory metafont input is in (idem). On my system the best
- choice would be /usr/lib/texmf/texmf/fonts/source/public/.
-o --enable-config
- Output to a different configuration file. Needed for multi-platform
- builds
+ This will install a number of files, something close to:
-All options are documented in the configure help
-The option --enable-optimise is recommended for Real Life usage.
+ /usr/local/man/man1/midi2ly.1
+ /usr/local/man/man1/abc2ly.1
+ /usr/local/man/man1/etf2ly.1
+ /usr/local/man/man1/convert-ly.1
+ /usr/local/man/man1/lilypond-book.1
+ /usr/local/man/man1/lilypond.1
+ /usr/local/bin/lilypond
+ /usr/local/bin/midi2ly
+ /usr/local/bin/convert-ly
+ /usr/local/bin/lilypond-book
+ /usr/local/bin/abc2ly
+ /usr/local/bin/pmx2ly
+ /usr/local/bin/musedata2ly
+ /usr/local/bin/etf2ly
+ /usr/local/share/lilypond/*
+ /usr/local/share/locale/{....}/LC_MESSAGES/lilypond.mo
-If you do
+ The above assumes that you are root and have the GNU development
+tools, and your make is GNU make. If this is not the case, you can
+adjust your environment variables to your taste:
- make all
-everything will be compiled, but nothing will be installed. The
-resulting binaries can be found in the subdirectories out/ (which
+ export CPPFLAGS="-I /home/me/my_include -DWEIRD_FOOBAR"
+ ./configure
+
+ `CPPFLAGS' are the preprocessor flags.
+
+ The configure script is Cygnus configure, and it will accept
+`--help'. If you are not root, you will probably have to make it with a
+different `--prefix' option. Our favourite location is
+
+
+ ./configure --prefix=$HOME/usr
+
+ In this case, you will have to set up MFINPUTS, and TEXINPUTS
+accordingly.
+
+ Since GNU LilyPond currently is beta, you are advised to also use
+
+
+ --enable-debugging
+ --enable-checking
+
+ Options to configure include:
+
+``--enable-printing''
+ Enable debugging print routines (lilypond `-D' option)
+
+``--enable-optimise''
+ Set maximum optimisation: compile with `-O2'. This can be
+ unreliable on some compiler/platform combinations (eg, DEC Alpha
+ and PPC)
+
+``--enable-profiling''
+ Compile with support for profiling.
+
+``--enable-config''
+ Output to a different configuration file. Needed for
+ multi-platform builds
+
+ All options are documented in the `configure' help The option
+`--enable-optimise' is recommended for Real Life usage.
+
+ If you do
+
+
+ make all
+
+ everything will be compiled, but nothing will be installed. The
+resulting binaries can be found in the subdirectories `out/' (which
contain all files generated during compilation).
-7: CONFIGURING FOR MULTIPLE PLATFORMS
+Configuring for multiple platforms
+==================================
+
+ If you want to compile LilyPond with different configuration
+settings, then, you can use the `--enable-config' option. Example:
+suppose I want to build with and without profiling. Then I'd use the
+following for the normal build,
+
+
+ ./configure --prefix=~ --disable-optimise --enable-checking
+ make
+ make install
+
+ and for the profiling version, I specify a different configuration.
+
+
+ ./configure --prefix=~ --enable-profiling --enable-config=prof --enable-optimise --disable-checking
+ make config=prof
+ make config=prof install
+
+Installing
+==========
+
+ if you have done a successful `make', then a simple
+
+
+ make install
+
+ should do the trick.
+
+ If you are doing an upgrade, please remember to remove obsolete
+`.pk' and `.tfm' files of the fonts. A script has been provided to do
+the work for you, see `bin/clean-fonts.sh'.
+
+Redhat linux
+============
+
+ RedHat Linux users can compile an RPM. A spec file is in
+`make/out/lilypond.spec', it is distributed along with the sources.
+
+ You can make the rpm by issuing
+
+ rpm -tb lilypond-x.y.z.tar.gz
+ rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
+
+ Precompiled RedHat-7.0 i386 RPMS are available from
+`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/RedHat/'.
+
+ For compilation on a RedHat system you need these packages, in
+addition to the those needed for running:
+ * glibc-devel
+
+ * libstdc++-devel
+
+ * guile-devel
+
+ * flex
+
+ * bison
+
+ * texinfo
+
+ * tetex-devel
+
+Debian GNU/linux
+================
+
+ A Debian package is also available; see
+http://packages.debian.org/lilypond
+(http://packages.debian.org/lilypond) or contact Anthony Fok
+<foka@debian.org> for more information.
+
+ The build scripts are in the subdirectory `debian/'; you can make
+the .deb by doing
+
+
+ tar xzf lilypond-x.y.z.tar.gz
+ cd lilypond-x.y.z
+ dpkg-buildpackage
+ dpkg -i ../lilypond_x.y.z*deb
+
+ For compilation on a Debian GNU/Linux system you need these packages,
+in addition to the those needed for running:
+ * libc6-dev
+
+ * libstdc++<your-libstdc++-version-here>-dev
+
+ * libguile<your-libguile-version-here>-dev
+
+ * flex
+
+ * bison
+
+ * gettext
+
+ * texinfo
+
+ * tetex-dev
+
+ * debhelper
-If you want to compile LilyPond with different configuration settings,
-then, you can use the --enable-config option. Example: suppose I
-want to build with and without profiling. Then I'd use the
-following for the normal build,
+Windows NT/95
+=============
- configure --prefix=~ --disable-optimise --enable-checking
- make
- make install
+ Separate instructions on building for W32 are available; See the
+files in `Documentation/ntweb/', included with the sources.
-and for the profiling version, I specify a different configuration.
+Problems
+========
- configure --prefix=~ --enable-profiling --enable-config=optprof --enable-optimise --disable-checking
- make config=optprof
- make config=optprof install
+ For help and questions use <help-gnu-music@gnu.org> and
+<gnu-music-discuss@gnu.org>. Please consult the faq before mailing
+your problems.
-8: INSTALLING
+ If you find bugs, please send bug reports to <bug-gnu-music@gnu.org>.
-If you have done a successful make, then a simple
+ Bugs that are LilyPond's fault are listed in our TODO list on the
+web, or demonstrated in `input/bugs/'.
- make install
+ Bugs that are not LilyPond's fault are documented here.
-should do the trick.
+LinuxPPC Bugs:
+**************
-If you are doing an upgrade, please remember to remove obsolete
-.pk and .tfm files of the fonts. A script has been
-provided to do the work for you, see bin/clean-fonts.sh.
+ * egcs-1.1.2-12c (stock LinuxPPC R5) has a serious bug, upgrade to
+ fixed in egcs-1.1.2-12f or gcc-2.95-0a,
+ `ftp://dev.linuxppc.org/users/fsirl/R5/RPMS/ppc/'
-CAVEATS
+ * egcs-1.0.2 (LinuxPPC R4): all compiling with `-O2' is suspect, in
+ particular guile-1.3, and Lily herself will break.
-o The -O2 option to gcc triggers a gcc bug on DEC Alpha in dstream.cc. You
- should turn off this flag for this file.
+Linux-i386
+**********
-EXAMPLE
+ * SuSE6.2 and similar platforms (glibc 2.1, libstdc++ 2.9.0)
-This is what I type in my xterm:
+ Lily will crash during parsing (which suggests a C++ library
+ incompatibility). Precise cause, precise platform description or
+ solution are not known.
- lilypond someinput.ly
- tex someinput.tex
- xdvi someinput&
+ Note that this only happens on some computers with the said
+ platform.
-This is what the output looks like over here:
+ * libg++ 2.7
- GNU LilyPond 0.0.78 #4/FlowerLib 1.1.24 #0
- Parsing ... [/home/hw/share/lilypond/init//
- <..etc..>
- init//performer.ly]]][input/kortjakje.ly]
- Creating elements ...[8][16][24][25]
- Preprocessing elements...
- Calculating column positions ... [14][25]
- Postprocessing elements...
- TeX output to someinput.tex ...
- Creating MIDI elements ...MIDI output to someinput.midi ...
+ LilyPond occasionally crashes while parsing the initialisation
+ files. This is a very obscure bug, and usually entering the
+ commandline differently "fixes" it.
- hw:~/musix/spacer$ xdvi someinput&
- [1] 855
+ lilypond input.ly
-Check out the input files, some of them have comments
-Please refer to the man page for more information.
+ and
+ lilypond -I. ./input.ly
+ makes a difference
-9: REDHAT LINUX
+ Typical stacktrace:
+ SIGSEGV
+ __libc_malloc (bytes=16384)
+ ?? ()
+ yyFlexLexer::yy_create_buffer ()
+ Includable_lexer::new_input (this=0x8209a00, s={strh_ = {
-RedHat Linux users can compile an RPM. A spec file is in
-make/out/lilypond.spec. You should install a gif file called
-lelie_icon.gif along with the sources. You can generate this
-gif file by typing
+ This behaviour has been observed with machines that have old libg++
+ versions (LinuxPPC feb '98, RedHat 4.x).
- make gifs
+Solaris:
+********
-in the directory Documentation.
+ * Sparc64/Solaris 2.6, GNU make-3.77
-You can make the rpm by issuing
+ GNU make-3.77 is buggy on this platform, upgrade to 3.78.1 or
+ newer.
- make rpm
+ * Sparc64/Solaris 2.6, ld
-10: DEBIAN GNU/LINUX
+ Not yet resolved.
-A Debian package is also available; contact Anthony Fok
-<foka@debian.org>. The build scripts are in the subdirectory debian/
+AIX
+***
-11: WINDOWS NT/95
+ * AIX 4.3 ld
-Separate instructions on building for W32 are avaible
-in the file README-W32.yo.
+ The following is from the gcc install/SPECIFIC file.
+ Some versions of the AIX binder (linker) can fail with a
+ relocation overflow severe error when the -bbigtoc option
+ is used to link GCC-produced object files into an
+ executable that overflows the TOC. A fix for APAR IX75823
+ (OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC) is
+ available from IBM Customer Support and from its
+ 27service.boulder.ibm.com website as PTF U455193.
-12: AUTHORS
+ Binutils does not support AIX 4.3 (at least through release
+ 2.9). GNU as and GNU ld will not work properly and one
+ should not configure GCC to use those GNU utilities. Use
+ the native AIX tools which do interoperate with GCC.
-Han-Wen Nienhuys <hanwen@cs.uu.nl>
+ add -Wl,-bbigtoc to USER_LDFLAGS, ie:
+ LDFLAGS='-Wl,-bbigtoc' ./configure
-Jan Nieuwenhuizen <janneke@gnu.org>
-Have fun!