Guide, node Updating translation committishes..
@end ignore
-@c \version "2.13.36"
+@c \version "2.14.0"
@c Note: keep this node named so that `info lilypond-book' brings you here.
@node lilypond-book
\lilypondfile[quote,noindent]{screech-boink.ly}
-(If needed, replace @file{screech@/-boink@/.ly} by any @file{@/.ly} file
+(If needed, replace @file{screech-boink.ly} by any @file{.ly} file
you put in the same directory as this file.)
\end{document}
@subheading Processing
-Save the code above to a file called @file{lilybook@/.lytex}, then in a
+Save the code above to a file called @file{lilybook.lytex}, then in a
terminal run
@c keep space after @version{} so TeX doesn't choke
Running @command{lilypond-book} and @command{latex} creates a lot of
temporary files, which would clutter up the working directory. To
-remedy this, use the @code{--output=@var{dir}} option. It will create
+remedy this, use the @option{--output=@var{dir}} option. It will create
the files in a separate subdirectory @file{dir}.
Finally the result of the @LaTeX{} example shown above.@footnote{This
@lilypondfile[quote,noindent]{screech-boink.ly}
+If a @code{tagline} is required, either default or custom, then the
+entire snippet must be enclosed in a @code{\book @{ @}} construct.
+
+@lilypond[papersize=a8,verbatim]
+\book{
+ \header{
+ title = "A scale in LilyPond"
+ }
+
+ \relative c' {
+ c d e f g a b c
+ }
+}
+@end lilypond
@page
@emph{The Not So Short Introduction to @LaTeX{}}} for an overview on how
to use @LaTeX{}.
-Music is entered using
+@code{lilypond-book} provides the following commands and environments to include
+music in @LaTeX{} files:
+
+@itemize
+
+@item
+the @code{\lilypond@{...@}} command, where you can directly enter short
+lilypond code
+
+@item
+the @code{\begin@{lilypond@}...\end@{lilypond@}} environment, where you
+can directly enter longer lilypond code
+
+@item
+the @code{\lilypondfile@{...@}} command to insert a lilypond file
+
+@item
+the @code{\musicxmlfile@{...@}} command to insert a MusicXML file, which
+will be processed by @code{musicxml2ly} and @code{lilypond}.
+
+@end itemize
+
+In the input file, music is specified with any of the following commands
@example
\begin@{lilypond@}[options,go,here]
YOUR LILYPOND CODE
\end@{lilypond@}
-@end example
-@noindent
-or
+\lilypond[options,go,here]@{ YOUR LILYPOND CODE @}
-@example
\lilypondfile[options,go,here]@{@var{filename}@}
+
+\musicxmlfile[options,go,here]@{@var{filename}@}
@end example
-@noindent
-or
-@example
-\lilypond[options,go,here]@{ YOUR LILYPOND CODE @}
-@end example
+@noindent
Additionally, @code{\lilypondversion} displays the current version
of lilypond.
example of a Texinfo document is this manual. The HTML, PDF, and Info
versions of the manual are made from the Texinfo document.
-In the input file, music is specified with
+@code{lilypond-book} provides the following commands and environments to include
+music into Texinfo files:
+
+@itemize
+
+@item
+the @code{@@lilypond@{...@}} command, where you can directly enter short
+lilypond code
+
+@item
+the @code{@@lilypond...@@end lilypond} environment, where you can directly
+enter longer lilypond code
+
+@item
+the @code{@@lilypondfile@{...@}} command to insert a lilypond file
+
+@item
+the @code{@@musicxmlfile@{...@}} command to insert a MusicXML file, which
+will be processed by @code{musicxml2ly} and @code{lilypond}.
+
+@end itemize
+
+In the input file, music is specified with any of the following commands
@example
@@lilypond[options,go,here]
YOUR LILYPOND CODE
@@end lilypond
-@end example
-@noindent
-or
-
-@example
@@lilypond[options,go,here]@{ YOUR LILYPOND CODE @}
-@end example
-
-@noindent
-or
-@example
@@lilypondfile[options,go,here]@{@var{filename}@}
+
+@@musicxmlfile[options,go,here]@{@var{filename}@}
@end example
Additionally, @code{@@lilypondversion} displays the current version
of lilypond.
When @command{lilypond-book} is run on it, this results in a Texinfo
-file (with extension @file{@/.texi}) containing @code{@@image} tags for
+file (with extension @file{.texi}) containing @code{@@image} tags for
HTML, Info and printed output. @command{lilypond-book} generates images
of the music in EPS and PDF formats for use in the printed output, and
in PNG format for use in HTML and Info output.
@node HTML
@subsection HTML
-Music is entered using
+@code{lilypond-book} provides the following commands and environments to include
+music in HTML files:
+
+@itemize
+
+@item
+the @code{<lilypond .... />} command, where you can directly enter short lilypond code
+
+@item
+the @code{<lilyond>...</lilypond>} environment, where you can directly enter longer
+lilypond code
+
+@item
+the @code{<lilypondfile>...</lilypondfile>} command to insert a lilypond file
+
+@item
+the @code{<musicxmlfile>...</musicxmlfile>} command to insert a MusicXML file, which
+will be processed by @code{musicxml2ly} and @code{lilypond}.
+
+@end itemize
+In the input file, music is specified with any of the following commands
+
+\begin@{lilypond@}[options,go,here]
+ YOUR LILYPOND CODE
+\end@{lilypond@}
+
+\lilypond[options,go,here]@{ YOUR LILYPOND CODE @}
+
+\lilypondfile[options,go,here]@{@var{filename}@}
+
+\musicxmlfile[options,go,here]@{@var{filename}@}
+@example
+<lilypond options go here>
+ YOUR LILYPOND CODE
+</lilypond>
+
+<lilypond options go here: YOUR LILYPOND CODE />
+
+<lilypondfile options go here>@var{filename}</lilypondfile>
+
+<musicxmlfile options go here>@var{filename}</musicxmlfile>
+@end example
+
+For example, you can write
@example
<lilypond fragment relative=2>
\key c \minor c4 es g2
<lilypondfile @var{option1} @var{option2} ...>@var{filename}</lilypondfile>
@end example
+@code{<musicxmlfile>} uses the same syntax as @code{<lilypondfile>}, but simply
+references a MusicXML file rather than a LilyPond file.
+
For a list of options to use with the @code{lilypond} or
@code{lilypondfile} tags, see @ref{Music fragment options}.
provided in the @code{role} property of the innermost element (see in
next sections). Tags are chosen to allow DocBook editors format the
content gracefully. The DocBook files to be processed with
-@command{lilypond-book} should have the extension @file{@/.lyxml}.
+@command{lilypond-book} should have the extension @file{.lyxml}.
@subheading Including a LilyPond file
-This is the most simple case. We must use the @file{@/.ly} extension for
+This is the most simple case. We must use the @file{.ly} extension for
the included file, and insert it as a standard @code{imageobject}, with
the following structure:
@subheading Processing the DocBook document
-Running @command{lilypond-book} on our @file{@/.lyxml} file will create a
-valid DocBook document to be further processed with @file{@/.xml}
+Running @command{lilypond-book} on our @file{.lyxml} file will create a
+valid DocBook document to be further processed with @file{.xml}
extension. If you use
@uref{http://@/dblatex@/.sourceforge@/.net@/,dblatex}, it will create a
PDF file from this document automatically. For HTML (HTML Help,
guess a default for @code{lilypond} environments which don't use the
@code{ragged-right} option.
+@item papersize=@var{string}
+Where @var{string} is a paper size defined in @file{scm/paper.scm} i.e.
+@code{a5}, @code{quarto}, @code{11x17} etc.
+
+Values not defined in @file{scm/paper.scm} will be ignored, a warning
+will be posted and the snippet will be printed using the default
+@code{a4} size.
+
@item notime
Do not print the time signature, and turns off the timing (time signature,
bar lines) in the score.
If you would like to translate comments and variable names in verbatim
output but not in the sources, you may set the environment variable
@code{LYDOC_LOCALEDIR} to a directory path; the directory should
-contain a tree of @file{@/.mo} message catalogs with @code{lilypond-doc}
+contain a tree of @file{.mo} message catalogs with @code{lilypond-doc}
as a domain.
@item addversion
@item texidoc
(Only for Texinfo output.) If @command{lilypond} is called with the
@option{--header=@/texidoc} option, and the file to be processed is
-called @file{foo@/.ly}, it creates a file @file{foo@/.texidoc} if there
+called @file{foo.ly}, it creates a file @file{foo.texidoc} if there
is a @code{texidoc} field in the @code{\header}. The @code{texidoc}
option makes @command{lilypond-book} include such files, adding its
contents as a documentation block right before the music snippet.
-Assuming the file @file{foo@/.ly} contains
+Assuming the file @file{foo.ly} contains
@example
\header @{
@end example
@noindent
-and we have this in our Texinfo document @file{test@/.texinfo}
+and we have this in our Texinfo document @file{test.texinfo}
@example
@@lilypondfile[texidoc]@{foo.ly@}
@end example
Most LilyPond test documents (in the @file{input} directory of the
-distribution) are small @file{@/.ly} files which look exactly like this.
+distribution) are small @file{.ly} files which look exactly like this.
For localization purpose, if the Texinfo document contains
-@code{@@documentlanguage @var{LANG}} and @file{foo@/.ly} header
+@code{@@documentlanguage @var{LANG}} and @file{foo.ly} header
contains a @code{texidoc@var{LANG}} field, and if @command{lilypond}
is called with @option{--header=@/texidoc@var{LANG}}, then
-@file{foo@/.texidoc@var{LANG}} will be included instead of
-@file{foo@/.texidoc}.
+@file{foo.texidoc@var{LANG}} will be included instead of
+@file{foo.texidoc}.
@item lilyquote
(Only for Texinfo output.) This option is similar to quote, but only
(Only for Texinfo output.) This option works similarly to
@code{texidoc} option: if @command{lilypond} is called with the
@option{--header=@/doctitle} option, and the file to be processed is
-called @file{foo@/.ly} and contains a @code{doctitle} field in the
-@code{\header}, it creates a file @file{foo@/.doctitle}. When
-@code{doctitle} option is used, the contents of @file{foo@/.doctitle},
+called @file{foo.ly} and contains a @code{doctitle} field in the
+@code{\header}, it creates a file @file{foo.doctitle}. When
+@code{doctitle} option is used, the contents of @file{foo.doctitle},
which should be a single line of @var{text}, is inserted in the
Texinfo document as @code{@@lydoctitle @var{text}}.
@code{@@lydoctitle} should be a macro defined in the Texinfo document.
@section Invoking @command{lilypond-book}
@command{lilypond-book} produces a file with one of the following
-extensions: @file{@/.tex}, @file{@/.texi}, @file{@/.html} or @file{@/.xml},
-depending on the output format. All of @file{@/.tex}, @file{@/.texi} and
-@file{@/.xml} files need further processing.
+extensions: @file{.tex}, @file{.texi}, @file{.html} or @file{.xml},
+depending on the output format. All of @file{.tex}, @file{.texi} and
+@file{.xml} files need further processing.
@subheading Format-specific instructions
@end example
@noindent
-The @file{@/.dvi} file created by this process will not contain
+The @file{.dvi} file created by this process will not contain
note heads. This is normal; if you follow the instructions, they
-will be included in the @file{@/.ps} and @file{@/.pdf} files.
+will be included in the @file{.ps} and @file{.pdf} files.
Running @command{dvips} may produce some warnings about fonts; these
are harmless and may be ignored. If you are running @command{latex} in
-twocolumn mode, remember to add @code{-t landscape} to the
+twocolumn mode, remember to add @option{-t landscape} to the
@command{dvips} options.
@subsubheading Texinfo
for already compiled snippets in the include path, and does not write
them back to the output directory, so in some cases it is necessary to
invoke further processing commands such as @command{makeinfo} or
-@command{latex} with the same @code{-I @var{dir}} options.
+@command{latex} with the same @option{-I @var{dir}} options.
@item -o @var{dir}
@itemx --output=@var{dir}
LilyPond Info documentation without images.
@itemx --lily-output-dir=@var{dir}
-Write lily-XXX files to directory @var{dir}, link into @code{--output}
+Write lily-XXX files to directory @var{dir}, link into @option{--output}
directory. Use this option to save building time for documents in
different directories which share a lot of identical snippets.
@item -P @var{command}
@itemx --process=@var{command}
Process LilyPond snippets using @var{command}. The default command is
-@code{lilypond}. @code{lilypond-book} will not @code{--filter} and
-@code{--process} at the same time.
+@code{lilypond}. @code{lilypond-book} will not @option{--filter} and
+@option{--process} at the same time.
@item --pdf
Create PDF files for use with PDF@LaTeX{}.
+@item --redirect-lilypond-output
+By default, output is displayed on the terminal. This option redirects
+all output to log files in the same directory as the source files.
+
@itemx --use-source-file-names
Write snippet output files with the same base name as their source file.
This option works only for snippets included with @code{lilypondfile}
-and only if directories implied by @code{--output-dir} and
-@code{--lily-output-dir} options are different.
+and only if directories implied by @option{--output-dir} and
+@option{--lily-output-dir} options are different.
@item -V
@itemx --verbose
If you use the same filename extension for the input file than the
extension @command{lilypond-book} uses for the output file, and if the
input file is in the same directory as @command{lilypond-book} working
-directory, you must use @code{--output} option to make
+directory, you must use @option{--output} option to make
@command{lilypond-book} running, otherwise it will exit with an error
message like @qq{Output would overwrite input file}.