-%% Do not edit this file; it is automatically
-%% generated from LSR http://lsr.dsi.unimi.it
+%% DO NOT EDIT this file manually; it is automatically
+%% generated from LSR http://lsr.di.unimi.it
+%% Make any changes in LSR itself, or in Documentation/snippets/new/ ,
+%% and then run scripts/auxiliar/makelsr.py
+%%
%% This file is in the public domain.
-\version "2.12.2"
+\version "2.18.0"
\header {
lsrtags = "pitches, staff-notation, tweaks-and-overrides"
-%% Translation of GIT committish: fa19277d20f8ab0397c560eb0e7b814bd804ecec
- doctitlees = "Trucaje de las propiedades de clave"
- texidoces = "
-La instrucción @code{\\clef \"treble_8\"} equivale a un ajuste de
-@code{clefGlyph}, @code{clefPosition} (que controla la posición
-vertical de la clave), @code{middleCPosition} y
-@code{clefOctavation}. Se imprime una clave cada vez que se
-modifica cualquiera de las propiedades excepto
-@code{middleCPosition}.
-
-Observe que la modificación del glifo, la posición de la clave o
-su octavación, no cambian 'per se' la posición de las siguientes
-notas del pentagrama: para hacer esto también se debe especificar
-la posición del Do central. Los parámetros posicionales están en
-relación con la tercera línea del pentagrama, los números
-positivos desplazan hacia arriba, contando una unidad por cada
-línea y espacio. El valor de @code{clefOctavation} se
-establecería normalmente a 7, -7, 15 or -15, pero son válidos
-otros valores.
-
-Cuando se produce un cambio de clave en el salto de línea se
-imprime la clave nueva tanto al final de la línea anterior como al
-principio de la nueva, de forma predeterminada. Si no se necesita
-la clave de advertencia al final de la línea anterior, se puede
-quitar estableciendo el valor de la propiedad
-@code{explicitClefVisibility} de @code{Staff}, a
-@code{end-of-line-invisible}. El comportamiento predeterminado se
-puede recuperar con @code{\\unset Staff.explicitClefVisibility}.
-
-Los siguientes ejemplos muestran las posibilidades cuando se
-ajustan estas propiedades manualmente. En la primera línea, los
-cambios manuales preservan el posicionamiento relativo estándar de
-las claves y las notas, pero no lo hacen en la segunda línea.
-"
-
-
-%% Translation of GIT committish: 0a868be38a775ecb1ef935b079000cebbc64de40
- doctitlede = "Eigenschaften des Schlüssels optimieren"
- texidocde = "
-Der Befehl @code{\\clef \"treble_8\"} ist gleichbedeutend mit einem
-expliziten Setzen der Eigenschaften von @code{clefGlyph},
-@code{clefPosition} (welche die vertikale Position des Schlüssels bestimmt),
-@code{middleCPosition} und @code{clefOctavation}. Ein Schlüssel wird
-ausgegeben, wenn eine der Eigenschaften außer @code{middleCPosition} sich
-ändert.
-
-Eine Änderung des Schriftzeichens (Glyph), der Schlüsselposition oder der
-Oktavierung selber ändert noch nicht die Position der darauf folgenden Noten
-auf dem System: das geschieht nur, wenn auch die Position des
-eingestrichenen@tie{}C (middleCPosition) angegeben wird. Die
-Positionsparameter sind relativ zur Mittellinie des Systems, dabei versetzen
-positive Zahlen die Position nach oben, jeweils eine Zahl für jede Linie
-plus Zwischenraum. Der @code{clefOctavation}-Wert ist normalerweise auf 7,
--7, 15 oder -15 gesetzt, aber auch andere Werte sind gültig.
-
-Wenn ein Schlüsselwechsel an einem Zeilenwechsel geschieht, wird das neue
-Symbol sowohl am Ende der alten Zeilen als auch am Anfang der neuen Zeile
-ausgegeben. Wenn der Warnungs-Schlüssel am Ende der alten Zeile nicht
-erforderlich ist, kann er unterdrückt werden, indem die
-@code{explicitClefVisibility}-Eigenschaft des @code{Staff}-Kontextes auf den
-Wert @code{end-of-line-invisible} gesetzt wird. Das Standardverhalten kann
-mit @code{\\unset Staff.explicitClefVisibility} wieder hergestellt werden.
-
-Die folgenden Beispiele zeigen die Möglichkeiten, wenn man diese
-Eigenschaften manuell setzt. Auf der ersten Zeile erhalten die manuellen
-Änderungen die ursprüngliche relative Positionierung von Schlüssel und
-Noten, auf der zweiten Zeile nicht.
-"
-
-%% Translation of GIT committish: 4ab2514496ac3d88a9f3121a76f890c97cedcf4e
- texidocfr = "
-La commande @code{\\clef \"treble_8\"} équivaut à définir @code{clefGlyph},
-@code{clefPosition} -- qui contrôle la position verticale de la clé --
-@code{middleCPosition} et @code{clefOctavation}. Une clé est imprimée
-lorsque l'une de ces propriétés, hormis @code{middleCPosition}, est
-modifiée. Les exemples suivant font apparaître des possibilités de
-réglage manuel de ces propriétés.
-
-
-Modifier le glyphe, la position de la clef ou son octaviation ne
-changera pas la position des notes ; il faut pour y parvenir modifier
-aussi la position du do médium. Le positionnement est relatif à la
-ligne médiane, un nombre positif faisant monter, chaque ligne ou
-interligne comptant pour 1. La valeur de @code{clefOctavation} devrait
-être de 7, -7, 15 ou -15, bien que rien ne vous empêche de lui affecter
-une autre valeur.
-
-
-Lorsqu'un changement de clef intervient en même temps qu'un saut de
-ligne, la nouvelle clef est imprimer à la fois en fin de ligne et au
-début de la suivante. Vous pouvez toujours supprimer cette « clef de
-précaution » en affectant la valeur @code{end-of-line-invisible} à la
-propriété @code{explicitClefVisibility} du contexte @code{Staff}. Le
-comportement par défaut sera réactivé par
-@w{@code{\\unset@tie{}Staff.explicitClefVisibility}}.
-
-
-Les exemples qui suivent illustrent les différentes possibilités de
-définir ces propriétés manuellement. Sur la première ligne, la
-position relative des notes par rapport aux clefs sont préservées, ce
-qui n'est pas le cas pour la deuxième ligne.
-
-"
- doctitlefr = "Affinage des propriétés d'une clef"
-
texidoc = "
-The command @code{\\clef \"treble_8\"} is equivalent to setting
-@code{clefGlyph}, @code{clefPosition} (which controls the vertical
-position of the clef), @code{middleCPosition} and
-@code{clefOctavation}. A clef is printed when any of the properties
-except @code{middleCPosition} are changed.
-
+Changing the Clef glyph, its position, or the ottavation does not
+change the position of subsequent notes on the staff. To get key
+signatures on their correct staff lines @code{middleCClefPosition} must
+also be specified, with positive or negative values moving @code{middle
+C} up or down respectively, relative to the staff's center line.
-Note that changing the glyph, the position of the clef, or the
-octavation does not in itself change the position of subsequent notes
-on the staff: the position of middle C must also be specified to do
-this. The positional parameters are relative to the staff center line,
-positive numbers displacing upwards, counting one for each line and
-space. The @code{clefOctavation} value would normally be set to 7, -7,
-15 or -15, but other values are valid.
+For example, @code{\\clef \"treble_8\"} is equivalent to setting the
+@code{clefGlyph}, @code{clefPosition} (the vertical position of the
+clef itself on the staff), @code{middleCPosition} and
+@code{clefTransposition}. Note that when any of these properties
+(except @code{middleCPosition}) are changed a new clef symbol is
+printed.
-When a clef change takes place at a line break the new clef symbol is
-printed at both the end of the previous line and the beginning of the
-new line by default. If the warning clef at the end of the previous
-line is not required it can be suppressed by setting the @code{Staff}
-property @code{explicitClefVisibility} to the value
-@code{end-of-line-invisible}. The default behavior can be recovered
-with @code{\\unset Staff.explicitClefVisibility}.
The following examples show the possibilities when setting these
properties manually. On the first line, the manual changes preserve the
doctitle = "Tweaking clef properties"
} % begin verbatim
-\layout { ragged-right = ##t }
-
{
% The default treble clef
+ \key f \major
c'1
% The standard bass clef
\set Staff.clefGlyph = #"clefs.F"
\set Staff.clefPosition = #2
\set Staff.middleCPosition = #6
+ \set Staff.middleCClefPosition = #6
+ \key g \major
c'1
% The baritone clef
\set Staff.clefGlyph = #"clefs.C"
\set Staff.clefPosition = #4
\set Staff.middleCPosition = #4
+ \set Staff.middleCClefPosition = #4
+ \key f \major
c'1
% The standard choral tenor clef
\set Staff.clefGlyph = #"clefs.G"
\set Staff.clefPosition = #-2
- \set Staff.clefOctavation = #-7
+ \set Staff.clefTransposition = #-7
\set Staff.middleCPosition = #1
+ \set Staff.middleCClefPosition = #1
+ \key f \major
c'1
% A non-standard clef
\set Staff.clefPosition = #0
- \set Staff.clefOctavation = #0
+ \set Staff.clefTransposition = #0
\set Staff.middleCPosition = #-4
+ \set Staff.middleCClefPosition = #-4
+ \key g \major
c'1 \break
% The following clef changes do not preserve
- % the normal relationship between notes and clefs:
+ % the normal relationship between notes, key signatures
+ % and clefs:
\set Staff.clefGlyph = #"clefs.F"
\set Staff.clefPosition = #2
c'1
\set Staff.clefGlyph = #"clefs.C"
c'1
- \set Staff.clefOctavation = #7
+ \set Staff.clefTransposition = #7
c'1
- \set Staff.clefOctavation = #0
+ \set Staff.clefTransposition = #0
\set Staff.clefPosition = #0
c'1
\set Staff.middleCPosition = #0
c'1
}
-