use vars qw(@ISA @EXPORT %dh);
@ISA=qw(Exporter);
@EXPORT=qw(&init &doit &complex_doit &verbose_print &error &warning &tmpdir
- &pkgfile &pkgext &isnative &autoscript &filearray &GetPackages
- &basename &dirname &xargs %dh &compat &addsubstvar &delsubstvar
- &excludefile);
+ &pkgfile &pkgext &pkgfilename &isnative &autoscript &filearray
+ &filedoublearray &getpackages &basename &dirname &xargs %dh
+ &compat &addsubstvar &delsubstvar &excludefile &package_arch
+ &is_udeb &udeb_filename &debhelper_script_subst &escape_shell
+ &inhibit_log);
-my $max_compat=4;
+my $max_compat=7;
sub init {
# If DH_OPTIONS is set, prepend it @ARGV.
%dh=Debian::Debhelper::Dh_Getopt::parseopts();
}
+ # Another way to set excludes.
+ if (exists $ENV{DH_ALWAYS_EXCLUDE} && length $ENV{DH_ALWAYS_EXCLUDE}) {
+ push @{$dh{EXCLUDE}}, split(":", $ENV{DH_ALWAYS_EXCLUDE});
+ }
+
+ # Generate EXCLUDE_FIND.
+ if ($dh{EXCLUDE}) {
+ $dh{EXCLUDE_FIND}='';
+ foreach (@{$dh{EXCLUDE}}) {
+ my $x=$_;
+ $x=escape_shell($x);
+ $x=~s/\./\\\\./g;
+ $dh{EXCLUDE_FIND}.="-regex .\\*$x.\\* -or ";
+ }
+ $dh{EXCLUDE_FIND}=~s/ -or $//;
+ }
+
# Check to see if DH_VERBOSE environment variable was set, if so,
# make sure verbose is on.
if (defined $ENV{DH_VERBOSE} && $ENV{DH_VERBOSE} ne "") {
$dh{NO_ACT}=1;
}
+ my @allpackages=getpackages();
# Get the name of the main binary package (first one listed in
- # debian/control).
- my @allpackages=GetPackages();
- $dh{MAINPACKAGE}=$allpackages[0];
+ # debian/control). Only if the main package was not set on the
+ # command line.
+ if (! exists $dh{MAINPACKAGE} || ! defined $dh{MAINPACKAGE}) {
+ $dh{MAINPACKAGE}=$allpackages[0];
+ }
# Check if packages to build have been specified, if not, fall back to
# the default, doing them all.
# This package gets special treatement: files and directories specified on
# the command line may affect it.
$dh{FIRSTPACKAGE}=${$dh{DOPACKAGES}}[0];
+
+ # If no error handling function was specified, just propigate
+ # errors out.
+ if (! exists $dh{ERROR_HANDLER} || ! defined $dh{ERROR_HANDLER}) {
+ $dh{ERROR_HANDLER}='exit \$?';
+ }
+}
+
+# Run at exit. Add the command to the log files for the packages it acted
+# on, if it's exiting successfully.
+my $write_log=1;
+sub END {
+ if ($? == 0 && $write_log) {
+ my $cmd=basename($0);
+ foreach my $package (@{$dh{DOPACKAGES}}) {
+ my $ext=pkgext($package);
+ open(LOG, ">>", "debian/${ext}debhelper.log") || error("failed to write to log");
+ print LOG $cmd."\n";
+ close LOG;
+ }
+ }
+}
+
+sub inhibit_log {
+ $write_log=0;
}
# Pass it an array containing the arguments of a shell command like would
if ($word=~/\s/) {
# Escape only a few things since it will be quoted.
# Note we use double quotes because you cannot
- # escape ' in qingle quotes, while " can be escaped
+ # escape ' in single quotes, while " can be escaped
# in double.
# This does make -V"foo bar" turn into "-Vfoo bar",
# but that will be parsed identically by the shell
# anyway..
- $word=~s/([\n`\$"\\])/\$1/g;
+ $word=~s/([\n`\$"\\])/\\$1/g;
push @ret, "\"$word\"";
}
else {
verbose_print(escape_shell(@_));
if (! $dh{NO_ACT}) {
- system(@_) == 0 || error("command returned error code");
+ my $ret=system(@_);
+ $ret == 0 || error("command returned error code $ret");
}
}
# Pass in a number, will return true iff the current compatibility level
# is less than or equal to that number.
-sub compat {
- my $num=shift;
+{
+ my $warned_compat=0;
+ my $c;
+
+ sub compat {
+ my $num=shift;
- my $c=1;
- if (defined $ENV{DH_COMPAT}) {
- $c=$ENV{DH_COMPAT};
- }
- elsif (-e 'debian/compat') {
- # Try the file..
- open (COMPAT_IN, "debian/compat") || die "debian/compat: $!";
- $c=<COMPAT_IN>;
- chomp $c;
- }
+ if (! defined $c) {
+ $c=1;
+ if (defined $ENV{DH_COMPAT}) {
+ $c=$ENV{DH_COMPAT};
+ }
+ elsif (-e 'debian/compat') {
+ # Try the file..
+ open (COMPAT_IN, "debian/compat") || error "debian/compat: $!";
+ my $l=<COMPAT_IN>;
+ if (! defined $l || ! length $l) {
+ warning("debian/compat is empty, assuming level $c");
+ }
+ else {
+ chomp $l;
+ $c=$l;
+ }
+ }
+ }
- if ($c > $max_compat) {
- error("Sorry, but $max_compat is the highest compatibility level of debhelper currently supported.");
- }
+ if ($c < 4 && ! $warned_compat) {
+ warning("Compatibility levels before 4 are deprecated.");
+ $warned_compat=1;
+ }
+
+ if ($c > $max_compat) {
+ error("Sorry, but $max_compat is the highest compatibility level supported by this debhelper.");
+ }
- return ($c <= $num);
+ return ($c <= $num);
+ }
}
# Pass it a name of a binary package, it returns the name of the tmp dir to
# * debian/package.filename.buildarch
# * debian/package.filename
# * debian/file (if the package is the main package)
+# If --name was specified then tonly the first two are tried, and they must
+# have the name after the pacage name:
+# * debian/package.name.filename.buildarch
+# * debian/package.name.filename
sub pkgfile {
my $package=shift;
my $filename=shift;
- if (-f "debian/$package.$filename.".buildarch()) {
- return "debian/$package.$filename.".buildarch();
+ if (defined $dh{NAME}) {
+ $filename="$dh{NAME}.$filename";
}
- elsif (-f "debian/$package.$filename") {
- return "debian/$package.$filename";
- }
- elsif ($package eq $dh{MAINPACKAGE} && -f "debian/$filename") {
- return "debian/$filename";
+
+ my @try=("debian/$package.$filename.".buildarch(),
+ "debian/$package.$filename");
+ if ($package eq $dh{MAINPACKAGE}) {
+ push @try, "debian/$filename";
}
- else {
- return "";
+
+ foreach my $file (@try) {
+ if (-f $file &&
+ (! $dh{IGNORE} || ! exists $dh{IGNORE}->{$file})) {
+ return $file;
+ }
+
}
+
+ return "";
+
}
# Pass it a name of a binary package, it returns the name to prefix to files
-# in debian for this package.
+# in debian/ for this package.
sub pkgext {
my $package=shift;
return "$package.";
}
+# Pass it the name of a binary package, it returns the name to install
+# files by in eg, etc. Normally this is the same, but --name can override
+# it.
+sub pkgfilename {
+ my $package=shift;
+
+ if (defined $dh{NAME}) {
+ return $dh{NAME};
+ }
+ return $package;
+}
+
# Returns 1 if the package is a native debian package, null otherwise.
# As a side effect, sets $dh{VERSION} to the version of this package.
{
my $filename=shift;
my $sed=shift || "";
- # This is the file we will append to.
+ # This is the file we will modify.
my $outfile="debian/".pkgext($package)."$script.debhelper";
# Figure out what shell script snippet to use.
}
}
- complex_doit("echo \"# Automatically added by ".basename($0)."\">> $outfile");
- complex_doit("sed \"$sed\" $infile >> $outfile");
- complex_doit("echo '# End automatically added section' >> $outfile");
+ if (-e $outfile && ($script eq 'postrm' || $script eq 'prerm')
+ && !compat(5)) {
+ # Add fragments to top so they run in reverse order when removing.
+ complex_doit("echo \"# Automatically added by ".basename($0)."\"> $outfile.new");
+ complex_doit("sed \"$sed\" $infile >> $outfile.new");
+ complex_doit("echo '# End automatically added section' >> $outfile.new");
+ complex_doit("cat $outfile >> $outfile.new");
+ complex_doit("mv $outfile.new $outfile");
+ }
+ else {
+ complex_doit("echo \"# Automatically added by ".basename($0)."\">> $outfile");
+ complex_doit("sed \"$sed\" $infile >> $outfile");
+ complex_doit("echo '# End automatically added section' >> $outfile");
+ }
}
# Removes a whole substvar line.
my $substvarfile="debian/${ext}substvars";
if (-e $substvarfile) {
- complex_doit("grep -v '^${substvar}=' $substvarfile > $substvarfile.new || true");
+ complex_doit("grep -s -v '^${substvar}=' $substvarfile > $substvarfile.new || true");
doit("mv", "$substvarfile.new","$substvarfile");
}
}
my $line="";
if (-e $substvarfile) {
my %items;
- open(SUBSTVARS_IN, "$substvarfile") || die "read $substvarfile: $!";
+ open(SUBSTVARS_IN, "$substvarfile") || error "read $substvarfile: $!";
while (<SUBSTVARS_IN>) {
chomp;
if (/^\Q$substvar\E=(.*)/) {
else {
delete $items{$str};
}
- $line=join(", ", keys %items);
+ $line=join(", ", sort keys %items);
}
elsif (! $remove) {
$line=$str;
}
if (length $line) {
- complex_doit("echo '${substvar}=$line' >> $substvarfile");
+ complex_doit("(grep -s -v ${substvar} $substvarfile; echo ".escape_shell("${substvar}=$line").") > $substvarfile.new");
+ doit("mv", "$substvarfile.new", $substvarfile);
+ }
+ else {
+ delsubstvar($package,$substvar);
}
}
my @ret;
open (DH_FARRAY_IN, $file) || error("cannot read $file: $1");
while (<DH_FARRAY_IN>) {
+ chomp;
+ # Only ignore comments and empty lines in v5 mode.
+ if (! compat(4)) {
+ next if /^#/ || /^$/;
+ }
my @line;
# Only do glob expansion in v3 mode.
#
sub buildarch {
return $arch if defined $arch;
- $arch=`dpkg --print-architecture` || error($!);
+ $arch=`dpkg-architecture -qDEB_HOST_ARCH 2>/dev/null` || error("dpkg-architecture failed");
chomp $arch;
return $arch;
}
}
+# Passed an arch and a list of arches to match against, returns true if matched
+sub samearch {
+ my $arch=shift;
+ my @archlist=split(/\s+/,shift);
+
+ foreach my $a (@archlist) {
+ system("dpkg-architecture", "-a$arch", "-i$a") == 0 && return 1;
+ }
+
+ return 0;
+}
+
# Returns a list of packages in the control file.
# Must pass "arch" or "indep" or "same" to specify arch-dependant or
# -independant or same arch packages. If nothing is specified, returns all
# packages.
-sub GetPackages {
+# As a side effect, populates %package_arches and %package_types with the
+# types of all packages (not only those returned).
+my (%package_types, %package_arches);
+sub getpackages {
my $type=shift;
+
+ %package_types=();
+ %package_arches=();
$type="" if ! defined $type;
my $package="";
my $arch="";
+ my $package_type;
my @list=();
my %seen;
open (CONTROL, 'debian/control') ||
else {
error("debian/control has a duplicate entry for $package");
}
+ $package_type="deb";
}
if (/^Architecture:\s*(.*)/) {
$arch=$1;
}
+ if (/^(?:X[BC]*-)?Package-Type:\s*(.*)/) {
+ $package_type=$1;
+ }
if (!$_ or eof) { # end of stanza.
+ if ($package) {
+ $package_types{$package}=$package_type;
+ $package_arches{$package}=$arch;
+ }
if ($package &&
(($type eq 'indep' && $arch eq 'all') ||
($type eq 'arch' && $arch ne 'all') ||
- ($type eq 'same' && ($arch eq 'any' || $arch =~ /\b$buildarch\b/)) ||
+ ($type eq 'same' && ($arch eq 'any' || samearch($buildarch, $arch))) ||
! $type)) {
push @list, $package;
$package="";
return @list;
}
+# Returns the arch a package will build for.
+sub package_arch {
+ my $package=shift;
+
+ if (! exists $package_arches{$package}) {
+ warning "package $package is not in control info";
+ return buildarch();
+ }
+ return $package_arches{$package} eq 'all' ? "all" : buildarch();
+}
+
+# Return true if a given package is really a udeb.
+sub is_udeb {
+ my $package=shift;
+
+ if (! exists $package_types{$package}) {
+ warning "package $package is not in control info";
+ return 0;
+ }
+ return $package_types{$package} eq 'udeb';
+}
+
+# Generates the filename that is used for a udeb package.
+sub udeb_filename {
+ my $package=shift;
+
+ my $filearch=package_arch($package);
+ isnative($package); # side effect
+ my $version=$dh{VERSION};
+ $version=~s/^[0-9]+://; # strip any epoch
+ return "${package}_${version}_$filearch.udeb";
+}
+
+# Handles #DEBHELPER# substitution in a script; also can generate a new
+# script from scratch if none exists but there is a .debhelper file for it.
+sub debhelper_script_subst {
+ my $package=shift;
+ my $script=shift;
+
+ my $tmp=tmpdir($package);
+ my $ext=pkgext($package);
+ my $file=pkgfile($package,$script);
+
+ if ($file ne '') {
+ if (-f "debian/$ext$script.debhelper") {
+ # Add this into the script, where it has #DEBHELPER#
+ complex_doit("perl -pe 's~#DEBHELPER#~qx{cat debian/$ext$script.debhelper}~eg' < $file > $tmp/DEBIAN/$script");
+ }
+ else {
+ # Just get rid of any #DEBHELPER# in the script.
+ complex_doit("sed s/#DEBHELPER#// < $file > $tmp/DEBIAN/$script");
+ }
+ doit("chown","0:0","$tmp/DEBIAN/$script");
+ doit("chmod",755,"$tmp/DEBIAN/$script");
+ }
+ elsif ( -f "debian/$ext$script.debhelper" ) {
+ complex_doit("printf '#!/bin/sh\nset -e\n' > $tmp/DEBIAN/$script");
+ complex_doit("cat debian/$ext$script.debhelper >> $tmp/DEBIAN/$script");
+ doit("chown","0:0","$tmp/DEBIAN/$script");
+ doit("chmod",755,"$tmp/DEBIAN/$script");
+ }
+}
+
1