Merge branch 'master' into buildsystems

[debhelper.git] / Debian / Debhelper / Dh_Lib.pm

diff --git a/Debian/Debhelper/Dh_Lib.pm b/Debian/Debhelper/Dh_Lib.pm
index f0aa71df5c68270abf9da0969968e6d6e05c913b..28a90f7bdad16b37900c7021d9b055f2d8f6388b 100644 (file)
--- a/Debian/Debhelper/Dh_Lib.pm
+++ b/Debian/Debhelper/Dh_Lib.pm
@@ -15,7 +15,8 @@ use vars qw(@ISA @EXPORT %dh);
            &filedoublearray &getpackages &basename &dirname &xargs %dh
            &compat &addsubstvar &delsubstvar &excludefile &package_arch
            &is_udeb &udeb_filename &debhelper_script_subst &escape_shell
-           &inhibit_log);
+           &inhibit_log &load_log &write_log &dpkg_architecture_value
+           &sourcepackage);
 
 my $max_compat=7;
 
@@ -74,9 +75,6 @@ sub init {
        # Check if packages to build have been specified, if not, fall back to
        # the default, doing them all.
        if (! defined $dh{DOPACKAGES} || ! @{$dh{DOPACKAGES}}) {
-               if ($dh{DOINDEP} || $dh{DOARCH} || $dh{DOSAME}) {
-                       error("You asked that all arch in(dep) packages be built, but there are none of that type.");
-               }
                push @{$dh{DOPACKAGES}},@allpackages;
        }
 
@@ -105,7 +103,22 @@ sub END {
        if ($? == 0 && $write_log) {
                write_log(basename($0), @{$dh{DOPACKAGES}});
        }
-}      
+}
+
+sub load_log {
+       my ($package, $db)=@_;
+       my $ext=pkgext($package);
+
+       my @log;
+       open(LOG, "<", "debian/${ext}debhelper.log") || return;
+       while (<LOG>) {
+               chomp;
+               push @log, $_;
+               $db->{$package}{$_}=1 if defined $db;
+       }
+       close LOG;
+       return @log;
+}
 
 sub write_log {
        my $cmd=shift;
@@ -162,8 +175,7 @@ sub doit {
        verbose_print(escape_shell(@_));
 
        if (! $dh{NO_ACT}) {
-               my $ret=system(@_);
-               $ret == 0 || error("command returned error code $ret");
+               system(@_) == 0 || _error_exitcode($_[0]);
        }
 }
 
@@ -176,11 +188,23 @@ sub complex_doit {
        
        if (! $dh{NO_ACT}) {
                # The join makes system get a scalar so it forks off a shell.
-               system(join(" ",@_)) == 0
-                       || error("command returned error code");
+               system(join(" ", @_)) == 0 || _error_exitcode(join(" ", @_))
        }                       
 }
 
+sub _error_exitcode {
+       my $command=shift;
+       if ($? == -1) {
+               error("$command failed to to execute: $!");
+       }
+       elsif ($? & 127) {
+               error("$command died with signal ".($? & 127));
+        }
+       else {
+               error("$command returned exit code ".($? >> 8));
+       }
+}
+
 # Run a command that may have a huge number of arguments, like xargs does.
 # Pass in a reference to an array containing the arguments, and then other
 # parameters that are the command and any parameters that should be passed to
@@ -277,6 +301,7 @@ sub dirname {
                                # Try the file..
                                open (COMPAT_IN, "debian/compat") || error "debian/compat: $!";
                                my $l=<COMPAT_IN>;
+                               close COMPAT_IN;
                                if (! defined $l || ! length $l) {
                                        warning("debian/compat is empty, assuming level $c");
                                }
@@ -288,7 +313,7 @@ sub dirname {
                }
 
                if ($c < 4 && ! $warned_compat) {
-                       warning("Compatibility levels before 4 are deprecated.");
+                       warning("Compatibility levels before 5 are deprecated.");
                        $warned_compat=1;
                }
        
@@ -322,12 +347,15 @@ sub tmpdir {
 #
 # It tries several filenames:
 #   * debian/package.filename.buildarch
+#   * debian/package.filename.buildos
 #   * debian/package.filename
-#   * debian/file (if the package is the main package)
-# If --name was specified then tonly the first two are tried, and they must
-# have the name after the pacage name:
+#   * debian/filename (if the package is the main package)
+# If --name was specified then the files
+# must have the name after the package name:
 #   * debian/package.name.filename.buildarch
+#   * debian/package.name.filename.buildos
 #   * debian/package.name.filename
+#   * debian/name.filename (if the package is the main package)
 sub pkgfile {
        my $package=shift;
        my $filename=shift;
@@ -337,6 +365,7 @@ sub pkgfile {
        }
        
        my @try=("debian/$package.$filename.".buildarch(),
+                "debian/$package.$filename.".buildos(),
                 "debian/$package.$filename");
        if ($package eq $dh{MAINPACKAGE}) {
                push @try, "debian/$filename";
@@ -577,19 +606,38 @@ sub excludefile {
         return 0;
 }
 
+sub dpkg_architecture_value {
+       my $var = shift;
+       my $value=`dpkg-architecture -q$var 2>/dev/null` || error("dpkg-architecture failed");
+       chomp $value;
+       return $value;
+}
+
 # Returns the build architecture. (Memoized)
 {
        my $arch;
        
        sub buildarch {
-               return $arch if defined $arch;
-
-               $arch=`dpkg-architecture -qDEB_HOST_ARCH 2>/dev/null` || error("dpkg-architecture failed");
-               chomp $arch;
+               if (!defined $arch) {
+                   $arch=dpkg_architecture_value('DEB_HOST_ARCH');
+               }
                return $arch;
        }
 }
 
+# Returns the build OS. (Memoized)
+{
+       my $os;
+
+       sub buildos {
+               return $os if defined $os;
+
+               $os=`dpkg-architecture -qDEB_HOST_ARCH_OS 2>/dev/null` || error("dpkg-architecture failed");
+               chomp $os;
+               return $os;
+       }
+}
+
 # Passed an arch and a list of arches to match against, returns true if matched
 sub samearch {
        my $arch=shift;
@@ -602,6 +650,23 @@ sub samearch {
        return 0;
 }
 
+# Returns source package name
+sub sourcepackage {
+       open (CONTROL, 'debian/control') ||
+           error("cannot read debian/control: $!\n");
+       while (<CONTROL>) {
+               chomp;
+               s/\s+$//;
+               if (/^Source:\s*(.*)/) {
+                       close CONTROL;
+                       return $1;
+               }
+       }
+
+       close CONTROL;
+       error("could not find Source: line in control file.");
+}
+
 # Returns a list of packages in the control file.
 # Must pass "arch" or "indep" or "same" to specify arch-dependant or
 # -independant or same arch packages. If nothing is specified, returns all