#
# Library functions for debhelper programs, perl version.
#
-# Joey Hess, GPL copyright 1997-2000.
+# Joey Hess, GPL copyright 1997-2008.
package Debian::Debhelper::Dh_Lib;
use strict;
use vars qw(@ISA @EXPORT %dh);
@ISA=qw(Exporter);
@EXPORT=qw(&init &doit &complex_doit &verbose_print &error &warning &tmpdir
- &pkgfile &pkgext &isnative &autoscript &filearray &filedoublearray
- &GetPackages &basename &dirname &xargs %dh &compat &addsubstvar
- &delsubstvar &excludefile);
+ &pkgfile &pkgext &pkgfilename &isnative &autoscript &filearray
+ &filedoublearray &getpackages &basename &dirname &xargs %dh
+ &compat &addsubstvar &delsubstvar &excludefile &package_arch
+ &is_udeb &udeb_filename &debhelper_script_subst &escape_shell
+ &inhibit_log &load_log &write_log &dpkg_architecture_value
+ &sourcepackage);
-my $max_compat=4;
+my $max_compat=7;
sub init {
- # If DH_OPTIONS is set, prepend it @ARGV.
- if (defined($ENV{DH_OPTIONS})) {
- # Ignore leading/trailing whitespace.
- $ENV{DH_OPTIONS}=~s/^\s+//;
- $ENV{DH_OPTIONS}=~s/\s+$//;
- unshift @ARGV,split(/\s+/,$ENV{DH_OPTIONS});
- }
+ my %params=@_;
- # Check to see if an argument on the command line starts with a dash.
- # if so, we need to pass this off to the resource intensive
+ # Check to see if an option line starts with a dash,
+ # or DH_OPTIONS is set.
+ # If so, we need to pass this off to the resource intensive
# Getopt::Long, which I'd prefer to avoid loading at all if possible.
- my $parseopt=undef;
- my $arg;
- foreach $arg (@ARGV) {
- if ($arg=~m/^-/) {
- $parseopt=1;
- last;
- }
- }
- if ($parseopt) {
+ if ((defined $ENV{DH_OPTIONS} && length $ENV{DH_OPTIONS}) ||
+ (defined $ENV{DH_INTERNAL_OPTIONS} && length $ENV{DH_INTERNAL_OPTIONS}) ||
+ grep /^-/, @ARGV) {
eval "use Debian::Debhelper::Dh_Getopt";
- error($!) if $@;
- %dh=Debian::Debhelper::Dh_Getopt::parseopts();
+ error($@) if $@;
+ Debian::Debhelper::Dh_Getopt::parseopts($params{options});
}
# Another way to set excludes.
if (exists $ENV{DH_ALWAYS_EXCLUDE} && length $ENV{DH_ALWAYS_EXCLUDE}) {
- push @{$dh{EXCLUDE}}, $ENV{DH_ALWAYS_EXCLUDE};
+ push @{$dh{EXCLUDE}}, split(":", $ENV{DH_ALWAYS_EXCLUDE});
}
# Generate EXCLUDE_FIND.
foreach (@{$dh{EXCLUDE}}) {
my $x=$_;
$x=escape_shell($x);
- $x=~s/\./\\./g;
- $dh{EXCLUDE_FIND}.="-regex .*$x.* -or ";
+ $x=~s/\./\\\\./g;
+ $dh{EXCLUDE_FIND}.="-regex .\\*$x.\\* -or ";
}
$dh{EXCLUDE_FIND}=~s/ -or $//;
}
$dh{NO_ACT}=1;
}
- my @allpackages=GetPackages();
+ my @allpackages=getpackages();
# Get the name of the main binary package (first one listed in
# debian/control). Only if the main package was not set on the
# command line.
# Check if packages to build have been specified, if not, fall back to
# the default, doing them all.
if (! defined $dh{DOPACKAGES} || ! @{$dh{DOPACKAGES}}) {
- if ($dh{DOINDEP} || $dh{DOARCH} || $dh{DOSAME}) {
- error("You asked that all arch in(dep) packages be built, but there are none of that type.");
- }
push @{$dh{DOPACKAGES}},@allpackages;
}
# This package gets special treatement: files and directories specified on
# the command line may affect it.
$dh{FIRSTPACKAGE}=${$dh{DOPACKAGES}}[0];
+
+ # If no error handling function was specified, just propigate
+ # errors out.
+ if (! exists $dh{ERROR_HANDLER} || ! defined $dh{ERROR_HANDLER}) {
+ $dh{ERROR_HANDLER}='exit \$?';
+ }
+}
+
+# Run at exit. Add the command to the log files for the packages it acted
+# on, if it's exiting successfully.
+my $write_log=1;
+sub END {
+ if ($? == 0 && $write_log) {
+ write_log(basename($0), @{$dh{DOPACKAGES}});
+ }
+}
+
+sub load_log {
+ my ($package, $db)=@_;
+ my $ext=pkgext($package);
+
+ my @log;
+ open(LOG, "<", "debian/${ext}debhelper.log") || return;
+ while (<LOG>) {
+ chomp;
+ push @log, $_;
+ $db->{$package}{$_}=1 if defined $db;
+ }
+ close LOG;
+ return @log;
+}
+
+sub write_log {
+ my $cmd=shift;
+ my @packages=@_;
+
+ foreach my $package (@packages) {
+ my $ext=pkgext($package);
+ my $log="debian/${ext}debhelper.log";
+ open(LOG, ">>", $log) || error("failed to write to ${log}: $!");
+ print LOG $cmd."\n";
+ close LOG;
+ }
+}
+
+sub inhibit_log {
+ $write_log=0;
}
# Pass it an array containing the arguments of a shell command like would
# This does make -V"foo bar" turn into "-Vfoo bar",
# but that will be parsed identically by the shell
# anyway..
- $word=~s/([\n`\$"\\])/\$1/g;
+ $word=~s/([\n`\$"\\])/\\$1/g;
push @ret, "\"$word\"";
}
else {
verbose_print(escape_shell(@_));
if (! $dh{NO_ACT}) {
- my $ret=system(@_);
- $ret == 0 || error("command returned error code $ret");
+ system(@_) == 0 || _error_exitcode($_[0]);
}
}
if (! $dh{NO_ACT}) {
# The join makes system get a scalar so it forks off a shell.
- system(join(" ",@_)) == 0
- || error("command returned error code");
+ system(join(" ", @_)) == 0 || _error_exitcode(join(" ", @_))
}
}
+sub _error_exitcode {
+ my $command=shift;
+ if ($? == -1) {
+ error("$command failed to to execute: $!");
+ }
+ elsif ($? & 127) {
+ error("$command died with signal ".($? & 127));
+ }
+ else {
+ error("$command returned exit code ".($? >> 8));
+ }
+}
+
# Run a command that may have a huge number of arguments, like xargs does.
# Pass in a reference to an array containing the arguments, and then other
# parameters that are the command and any parameters that should be passed to
# Pass in a number, will return true iff the current compatibility level
# is less than or equal to that number.
-sub compat {
- my $num=shift;
+{
+ my $warned_compat=0;
+ my $c;
+
+ sub compat {
+ my $num=shift;
- my $c=1;
- if (defined $ENV{DH_COMPAT}) {
- $c=$ENV{DH_COMPAT};
- }
- elsif (-e 'debian/compat') {
- # Try the file..
- open (COMPAT_IN, "debian/compat") || die "debian/compat: $!";
- $c=<COMPAT_IN>;
- chomp $c;
- }
+ if (! defined $c) {
+ $c=1;
+ if (defined $ENV{DH_COMPAT}) {
+ $c=$ENV{DH_COMPAT};
+ }
+ elsif (-e 'debian/compat') {
+ # Try the file..
+ open (COMPAT_IN, "debian/compat") || error "debian/compat: $!";
+ my $l=<COMPAT_IN>;
+ close COMPAT_IN;
+ if (! defined $l || ! length $l) {
+ warning("debian/compat is empty, assuming level $c");
+ }
+ else {
+ chomp $l;
+ $c=$l;
+ }
+ }
+ }
- if ($c > $max_compat) {
- error("Sorry, but $max_compat is the highest compatibility level of debhelper currently supported.");
- }
+ if ($c < 4 && ! $warned_compat) {
+ warning("Compatibility levels before 5 are deprecated.");
+ $warned_compat=1;
+ }
+
+ if ($c > $max_compat) {
+ error("Sorry, but $max_compat is the highest compatibility level supported by this debhelper.");
+ }
- return ($c <= $num);
+ return ($c <= $num);
+ }
}
# Pass it a name of a binary package, it returns the name of the tmp dir to
#
# It tries several filenames:
# * debian/package.filename.buildarch
+# * debian/package.filename.buildos
# * debian/package.filename
-# * debian/file (if the package is the main package)
+# * debian/filename (if the package is the main package)
+# If --name was specified then the files
+# must have the name after the package name:
+# * debian/package.name.filename.buildarch
+# * debian/package.name.filename.buildos
+# * debian/package.name.filename
+# * debian/name.filename (if the package is the main package)
sub pkgfile {
my $package=shift;
my $filename=shift;
- if (-f "debian/$package.$filename.".buildarch()) {
- return "debian/$package.$filename.".buildarch();
+ if (defined $dh{NAME}) {
+ $filename="$dh{NAME}.$filename";
}
- elsif (-f "debian/$package.$filename") {
- return "debian/$package.$filename";
- }
- elsif ($package eq $dh{MAINPACKAGE} && -f "debian/$filename") {
- return "debian/$filename";
+
+ my @try=("debian/$package.$filename.".buildarch(),
+ "debian/$package.$filename.".buildos(),
+ "debian/$package.$filename");
+ if ($package eq $dh{MAINPACKAGE}) {
+ push @try, "debian/$filename";
}
- else {
- return "";
+
+ foreach my $file (@try) {
+ if (-f $file &&
+ (! $dh{IGNORE} || ! exists $dh{IGNORE}->{$file})) {
+ return $file;
+ }
+
}
+
+ return "";
+
}
# Pass it a name of a binary package, it returns the name to prefix to files
-# in debian for this package.
+# in debian/ for this package.
sub pkgext {
my $package=shift;
return "$package.";
}
+# Pass it the name of a binary package, it returns the name to install
+# files by in eg, etc. Normally this is the same, but --name can override
+# it.
+sub pkgfilename {
+ my $package=shift;
+
+ if (defined $dh{NAME}) {
+ return $dh{NAME};
+ }
+ return $package;
+}
+
# Returns 1 if the package is a native debian package, null otherwise.
# As a side effect, sets $dh{VERSION} to the version of this package.
{
my $filename=shift;
my $sed=shift || "";
- # This is the file we will append to.
+ # This is the file we will modify.
my $outfile="debian/".pkgext($package)."$script.debhelper";
# Figure out what shell script snippet to use.
}
}
- complex_doit("echo \"# Automatically added by ".basename($0)."\">> $outfile");
- complex_doit("sed \"$sed\" $infile >> $outfile");
- complex_doit("echo '# End automatically added section' >> $outfile");
+ if (-e $outfile && ($script eq 'postrm' || $script eq 'prerm')
+ && !compat(5)) {
+ # Add fragments to top so they run in reverse order when removing.
+ complex_doit("echo \"# Automatically added by ".basename($0)."\"> $outfile.new");
+ complex_doit("sed \"$sed\" $infile >> $outfile.new");
+ complex_doit("echo '# End automatically added section' >> $outfile.new");
+ complex_doit("cat $outfile >> $outfile.new");
+ complex_doit("mv $outfile.new $outfile");
+ }
+ else {
+ complex_doit("echo \"# Automatically added by ".basename($0)."\">> $outfile");
+ complex_doit("sed \"$sed\" $infile >> $outfile");
+ complex_doit("echo '# End automatically added section' >> $outfile");
+ }
}
# Removes a whole substvar line.
my $substvarfile="debian/${ext}substvars";
if (-e $substvarfile) {
- complex_doit("grep -v '^${substvar}=' $substvarfile > $substvarfile.new || true");
+ complex_doit("grep -s -v '^${substvar}=' $substvarfile > $substvarfile.new || true");
doit("mv", "$substvarfile.new","$substvarfile");
}
}
my $line="";
if (-e $substvarfile) {
my %items;
- open(SUBSTVARS_IN, "$substvarfile") || die "read $substvarfile: $!";
+ open(SUBSTVARS_IN, "$substvarfile") || error "read $substvarfile: $!";
while (<SUBSTVARS_IN>) {
chomp;
if (/^\Q$substvar\E=(.*)/) {
else {
delete $items{$str};
}
- $line=join(", ", keys %items);
+ $line=join(", ", sort keys %items);
}
elsif (! $remove) {
$line=$str;
}
if (length $line) {
- complex_doit("(grep -v ${substvar} $substvarfile 2>/dev/null; echo '${substvar}=$line') > $substvarfile.new");
+ complex_doit("(grep -s -v ${substvar} $substvarfile; echo ".escape_shell("${substvar}=$line").") > $substvarfile.new");
doit("mv", "$substvarfile.new", $substvarfile);
}
+ else {
+ delsubstvar($package,$substvar);
+ }
}
# Reads in the specified file, one line at a time. splits on words,
my @ret;
open (DH_FARRAY_IN, $file) || error("cannot read $file: $1");
while (<DH_FARRAY_IN>) {
+ chomp;
+ # Only ignore comments and empty lines in v5 mode.
+ if (! compat(4)) {
+ next if /^#/ || /^$/;
+ }
my @line;
# Only do glob expansion in v3 mode.
#
return 0;
}
+sub dpkg_architecture_value {
+ my $var = shift;
+ my $value=`dpkg-architecture -q$var 2>/dev/null` || error("dpkg-architecture failed");
+ chomp $value;
+ return $value;
+}
+
# Returns the build architecture. (Memoized)
{
my $arch;
sub buildarch {
- return $arch if defined $arch;
-
- $arch=`dpkg --print-architecture` || error($!);
- chomp $arch;
+ if (!defined $arch) {
+ $arch=dpkg_architecture_value('DEB_HOST_ARCH');
+ }
return $arch;
}
}
+# Returns the build OS. (Memoized)
+{
+ my $os;
+
+ sub buildos {
+ return $os if defined $os;
+
+ $os=`dpkg-architecture -qDEB_HOST_ARCH_OS 2>/dev/null` || error("dpkg-architecture failed");
+ chomp $os;
+ return $os;
+ }
+}
+
+# Passed an arch and a list of arches to match against, returns true if matched
+sub samearch {
+ my $arch=shift;
+ my @archlist=split(/\s+/,shift);
+
+ foreach my $a (@archlist) {
+ system("dpkg-architecture", "-a$arch", "-i$a") == 0 && return 1;
+ }
+
+ return 0;
+}
+
+# Returns source package name
+sub sourcepackage {
+ open (CONTROL, 'debian/control') ||
+ error("cannot read debian/control: $!\n");
+ while (<CONTROL>) {
+ chomp;
+ s/\s+$//;
+ if (/^Source:\s*(.*)/) {
+ close CONTROL;
+ return $1;
+ }
+ }
+
+ close CONTROL;
+ error("could not find Source: line in control file.");
+}
+
# Returns a list of packages in the control file.
# Must pass "arch" or "indep" or "same" to specify arch-dependant or
# -independant or same arch packages. If nothing is specified, returns all
# packages.
-sub GetPackages {
+# As a side effect, populates %package_arches and %package_types with the
+# types of all packages (not only those returned).
+my (%package_types, %package_arches);
+sub getpackages {
my $type=shift;
+
+ %package_types=();
+ %package_arches=();
$type="" if ! defined $type;
my $package="";
my $arch="";
+ my $package_type;
my @list=();
my %seen;
open (CONTROL, 'debian/control') ||
else {
error("debian/control has a duplicate entry for $package");
}
+ $package_type="deb";
}
if (/^Architecture:\s*(.*)/) {
$arch=$1;
}
+ if (/^(?:X[BC]*-)?Package-Type:\s*(.*)/) {
+ $package_type=$1;
+ }
if (!$_ or eof) { # end of stanza.
+ if ($package) {
+ $package_types{$package}=$package_type;
+ $package_arches{$package}=$arch;
+ }
if ($package &&
(($type eq 'indep' && $arch eq 'all') ||
($type eq 'arch' && $arch ne 'all') ||
- ($type eq 'same' && ($arch eq 'any' || $arch =~ /\b$buildarch\b/)) ||
+ ($type eq 'same' && ($arch eq 'any' || samearch($buildarch, $arch))) ||
! $type)) {
push @list, $package;
$package="";
return @list;
}
+# Returns the arch a package will build for.
+sub package_arch {
+ my $package=shift;
+
+ if (! exists $package_arches{$package}) {
+ warning "package $package is not in control info";
+ return buildarch();
+ }
+ return $package_arches{$package} eq 'all' ? "all" : buildarch();
+}
+
+# Return true if a given package is really a udeb.
+sub is_udeb {
+ my $package=shift;
+
+ if (! exists $package_types{$package}) {
+ warning "package $package is not in control info";
+ return 0;
+ }
+ return $package_types{$package} eq 'udeb';
+}
+
+# Generates the filename that is used for a udeb package.
+sub udeb_filename {
+ my $package=shift;
+
+ my $filearch=package_arch($package);
+ isnative($package); # side effect
+ my $version=$dh{VERSION};
+ $version=~s/^[0-9]+://; # strip any epoch
+ return "${package}_${version}_$filearch.udeb";
+}
+
+# Handles #DEBHELPER# substitution in a script; also can generate a new
+# script from scratch if none exists but there is a .debhelper file for it.
+sub debhelper_script_subst {
+ my $package=shift;
+ my $script=shift;
+
+ my $tmp=tmpdir($package);
+ my $ext=pkgext($package);
+ my $file=pkgfile($package,$script);
+
+ if ($file ne '') {
+ if (-f "debian/$ext$script.debhelper") {
+ # Add this into the script, where it has #DEBHELPER#
+ complex_doit("perl -pe 's~#DEBHELPER#~qx{cat debian/$ext$script.debhelper}~eg' < $file > $tmp/DEBIAN/$script");
+ }
+ else {
+ # Just get rid of any #DEBHELPER# in the script.
+ complex_doit("sed s/#DEBHELPER#// < $file > $tmp/DEBIAN/$script");
+ }
+ doit("chown","0:0","$tmp/DEBIAN/$script");
+ doit("chmod",755,"$tmp/DEBIAN/$script");
+ }
+ elsif ( -f "debian/$ext$script.debhelper" ) {
+ complex_doit("printf '#!/bin/sh\nset -e\n' > $tmp/DEBIAN/$script");
+ complex_doit("cat debian/$ext$script.debhelper >> $tmp/DEBIAN/$script");
+ doit("chown","0:0","$tmp/DEBIAN/$script");
+ doit("chmod",755,"$tmp/DEBIAN/$script");
+ }
+}
+
1