+#: dh:39
+msgid "B<--with> I<addon>[B<,>I<addon> ...]"
+msgstr "B<--with> I<rajout>[B<,>I<rajout> ...]"
+
+# type: textblock
+#. type: textblock
+#: dh:41
+msgid ""
+"Add the debhelper commands specified by the given addon to appropriate "
+"places in the sequence of commands that is run. This option can be repeated "
+"more than once, or multiple addons can be listed, separated by commas. This "
+"is used when there is a third-party package that provides debhelper "
+"commands. See the F<PROGRAMMING> file for documentation about the sequence "
+"addon interface."
+msgstr ""
+"Ajoute les commandes debhelper indiquées par les rajouts au bon endroit dans "
+"la séquence exécutée. Cette option peut être présente plusieurs fois ou bien "
+"plusieurs rajouts peuvent être indiqués en les séparant par des virgules. "
+"Cela est utile lorsqu'un paquet tiers fournit des commandes debhelper. "
+"Consulter le fichier F<PROGRAMMING> pour obtenir des informations à propos "
+"de l'interface de ces rajouts."
+
+# type: =item
+#. type: =item
+#: dh:48
+msgid "B<--without> I<addon>"
+msgstr "B<--without> I<rajout>"
+
+# type: textblock
+#. type: textblock
+#: dh:50
+msgid "The inverse of B<--with>, disables using the given addon."
+msgstr ""
+"Le contraire de B<--with>. Désactive l'utilisation des rajouts indiqués."
+
+# type: textblock
+#. type: textblock
+#: dh:54
+msgid "List all available addons."
+msgstr "Liste tous les rajouts disponibles."
+
+# type: =item
+#. type: =item
+#: dh:56
+msgid "B<--until> I<cmd>"
+msgstr "B<--until> I<commande>"
+
+# type: textblock
+#. type: textblock
+#: dh:58
+#, fuzzy
+#| msgid "Run commands in the sequence until and including I<cmd>, then stop."
+msgid ""
+"Run commands in the sequence until and including I<cmd>, then stop. "
+"(Deprecated)"
+msgstr ""
+"Exécute les commandes de la séquence jusqu'à la I<commande> spécifiée, "
+"l'exécute puis s'arrête."
+
+# type: =item
+#. type: =item
+#: dh:61
+msgid "B<--before> I<cmd>"
+msgstr "B<--before> I<commande>"
+
+# type: textblock
+#. type: textblock
+#: dh:63
+#, fuzzy
+#| msgid "Run commands in the sequence before I<cmd>, then stop."
+msgid "Run commands in the sequence before I<cmd>, then stop. (Deprecated)"
+msgstr ""
+"Exécute les commandes de la séquence situées avant la I<commande> spécifiée "
+"puis s'arrête."
+
+# type: =item
+#. type: =item
+#: dh:66
+msgid "B<--after> I<cmd>"
+msgstr "B<--after> I<commande>"
+
+# type: textblock
+#. type: textblock
+#: dh:68
+#, fuzzy
+#| msgid "Run commands in the sequence that come after I<cmd>."
+msgid "Run commands in the sequence that come after I<cmd>. (Deprecated)"
+msgstr ""
+"Exécute les commandes de la séquence situées après la I<commande> spécifiée."
+
+# type: =item
+#. type: =item
+#: dh:71
+msgid "B<--remaining>"
+msgstr "B<--remaining>"
+
+# type: textblock
+#. type: textblock
+#: dh:73
+#, fuzzy
+#| msgid "Run all commands in the sequence that have yet to be run."
+msgid "Run all commands in the sequence that have yet to be run. (Deprecated)"
+msgstr ""
+"Exécute toutes les commandes de la séquence qui n'ont pas encore été "
+"exécutées."
+
+#. type: textblock
+#: dh:78
+msgid ""
+"Prints commands that would run for a given sequence, but does not run them."
+msgstr ""
+"Affiche les commandes qui seraient utilisées pour une séquence donnée, sans "
+"les exécuter."
+
+# type: textblock
+#. type: textblock
+#: dh:82
+msgid ""
+"All other options passed to B<dh> are passed on to each command it runs. "
+"This can be used to set an option like B<-v> or B<-X> or B<-N>, as well as "
+"for more specialised options."
+msgstr ""
+"Toute autre option fournie à B<dh> est passée en paramètre à chaque commande "
+"exécutée. Cela est utile tant pour les options comme B<-v>, B<-X> ou B<-N> "
+"que pour des options plus spécialisées. "
+
+# type: textblock
+#. type: textblock
+#: dh:86
+msgid ""
+"In the above options, I<cmd> can be a full name of a debhelper command, or a "
+"substring. It'll first search for a command in the sequence exactly matching "
+"the name, to avoid any ambiguity. If there are multiple substring matches, "
+"the last one in the sequence will be used."
+msgstr ""
+"Dans les options ci-dessus, I<commande> peut être soit le nom complet de la "
+"commande debhelper, soit une sous-chaîne de ce nom. dh cherchera d'abord, "
+"dans la séquence, une commande portant le nom exact pour éviter toute "
+"ambiguïté. Si plusieurs commandes correspondent à la sous-chaîne la dernière "
+"de la séquence sera prise en compte."
+
+# type: =head1
+#. type: =head1
+#: dh:117 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+msgid "EXAMPLES"
+msgstr "EXEMPLES"
+
+# type: textblock
+#. type: textblock
+#: dh:119
+msgid ""
+"To see what commands are included in a sequence, without actually doing "
+"anything:"
+msgstr ""
+"Pour voir quelles commandes sont présentes dans une séquence, sans rien "
+"faire :"
+
+# type: verbatim
+#. type: verbatim
+#: dh:122
+#, no-wrap
+msgid ""
+"\tdh binary-arch --no-act\n"
+"\n"
+msgstr ""
+"\tdh binary-arch --no-act\n"
+"\n"
+
+# type: textblock
+#. type: textblock
+#: dh:124
+msgid ""
+"This is a very simple rules file, for packages where the default sequences "
+"of commands work with no additional options."
+msgstr ""
+"C'est un fichier rules très simple, pour les paquets où les séquences de "
+"commandes par défaut fonctionnent sans aucune option particulière."
+
+# type: verbatim
+#. type: verbatim
+#: dh:127 dh:134 dh:148 dh:161
+#, no-wrap
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@\n"
+"\n"
+
+# type: verbatim
+#. type: verbatim
+#: dh:131
+#, no-wrap
+msgid ""
+"Often you'll want to pass an option to a specific debhelper command. The\n"
+"easy way to do with is by adding an override target for that command.\n"
+"\t\n"
+msgstr ""
+"Il est fréquent de vouloir passer une option à une commande debhelper.\n"
+"Le moyen le plus simple de le faire consiste à surcharger la commande\n"
+"par défaut par celle que vous désirez.\t\n"
+
+# type: verbatim
+#. type: verbatim
+#: dh:138
+#, no-wrap
+msgid ""
+"\toverride_dh_strip:\n"
+"\t\tdh_strip -Xfoo\n"
+"\t\t\n"
+msgstr ""
+"\toverride_dh_strip:\n"
+"\t\tdh_strip -Xfoo\n"
+"\t\t\n"
+
+# type: verbatim
+#. type: verbatim
+#: dh:141
+#, no-wrap
+msgid ""
+"\toverride_dh_installdocs:\n"
+"\t\tdh_installdocs README TODO\n"
+"\n"
+msgstr ""
+"\toverride_dh_installdocs:\n"
+"\t\tdh_installdocs README TODO\n"
+"\n"
+
+# type: textblock
+#. type: textblock
+#: dh:144
+msgid ""
+"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
+"can't guess what to do for a strange package. Here's how to avoid running "
+"either and instead run your own commands."
+msgstr ""
+"Parfois les automatismes de L<dh_auto_configure(1)> et de L<dh_auto_build(1)"
+"> n'arrivent pas à deviner ce qu'il faut faire pour certains paquets tordus. "
+"Voici comment indiquer vos propres commandes plutôt que de laisser faire "
+"l'automatisme."
+
+# type: verbatim
+#. type: verbatim
+#: dh:152
+#, no-wrap
+msgid ""
+"\toverride_dh_auto_configure:\n"
+"\t\t./mondoconfig\n"
+"\n"
+msgstr ""
+"\toverride_dh_auto_configure:\n"
+"\t\t./mondoconfig\n"
+"\n"
+
+# type: verbatim
+#. type: verbatim
+#: dh:155
+#, no-wrap
+msgid ""
+"\toverride_dh_auto_build:\n"
+"\t\tmake universe-explode-in-delight\n"
+"\n"
+msgstr ""
+"\toverride_dh_auto_build:\n"
+"\t\tmake universe-explode-in-delight\n"
+"\n"
+
+# type: textblock
+#. type: textblock
+#: dh:158
+msgid ""
+"Another common case is wanting to do something manually before or after a "
+"particular debhelper command is run."
+msgstr ""
+"Un autre cas habituel consiste à vouloir faire quelque chose avant ou après "
+"l'exécution d'une certaine commande debhelper."
+
+# type: verbatim
+#. type: verbatim
+#: dh:165
+#, no-wrap
+msgid ""
+"\toverride_dh_fixperms:\n"
+"\t\tdh_fixperms\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\n"
+msgstr ""
+"\toverride_dh_fixperms:\n"
+"\t\tdh_fixperms\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\n"
+
+#. type: textblock
+#: dh:169
+msgid ""
+"Python tools are not run by dh by default, due to the continual change in "
+"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"Here is how to use B<dh_python2>."
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: dh:173
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\t#!/usr/bin/make -f\n"
+#| "\t%:\n"
+#| "\t\tdh $@ --with python-central\n"
+#| "\n"
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with python2\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with python-central\n"
+"\n"
+
+#. type: textblock
+#: dh:177
+msgid ""
+"If your package uses autotools and you want to freshen F<config.sub> and "
+"F<config.guess> with newer versions from the B<autotools-dev> package at "
+"build time, you can use some commands provided in B<autotools-dev> that "
+"automate it, like this."
+msgstr ""
+"Si le paquet utilise « autotools » et que vous voulez rafraîchir les "
+"F<config.sub> et les F<config.guess> avec les nouvelles versions du paquet "
+"B<autotools-dev> lors de la compilation, il est possible d'utiliser "
+"certaines commandes fournies dans B<autotools-dev> afin d'automatiser cette "
+"tâche, comme ci-dessous :"
+
+# type: verbatim
+#. type: verbatim
+#: dh:182
+#, no-wrap
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with autotools_dev\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with autotools_dev\n"
+"\n"
+
+# type: textblock
+#. type: textblock
+#: dh:186
+msgid ""
+"Here is how to force use of Perl's B<Module::Build> build system, which can "
+"be necessary if debhelper wrongly detects that the package uses MakeMaker."
+msgstr ""
+"Voici comment forcer l'utilisation du processus de construction B<Module::"
+"Build>, propre à Perl, qui pourra être indispensable si debhelper détectait, "
+"à tort, que le paquet utilise MakeMaker."
+
+# type: verbatim
+#. type: verbatim
+#: dh:190
+#, no-wrap
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --buildsystem=perl_build\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh --buildsystem=perl_build $@\n"
+"\n"
+
+# type: verbatim
+#. type: verbatim
+#: dh:194
+#, no-wrap
+msgid ""
+"To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
+"sequence addons like this:\n"
+"\t\n"
+msgstr ""
+"Pour patcher un paquet en utilisant « quilt », il faut demander à B<dh>\n"
+"d'utiliser la séquence B<dh> propre à « quilt ». Voici comment faire :\n"
+"\t\n"
+
+# type: verbatim
+#. type: verbatim
+#: dh:197
+#, no-wrap
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with quilt\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with quilt\n"
+"\n"
+
+# type: textblock
+#. type: textblock
+#: dh:201
+msgid ""
+"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
+"package's source, for a package where the source is located in a "
+"subdirectory."
+msgstr ""
+"Voici un exemple de remplacement où les commandes B<dh_auto_>I<*> cherchent "
+"la source du paquet car elle est située dans un sous-répertoire."
+
+# type: verbatim
+#. type: verbatim
+#: dh:205
+#, no-wrap
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --sourcedirectory=src\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --sourcedirectory=src\n"
+"\n"
+
+#. type: textblock
+#: dh:209
+msgid ""
+"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
+"in a subdirectory, which will be removed on B<clean>."
+msgstr ""
+"Voici un exemple d'utilisation des commandes B<dh_auto_>I<*> pour réaliser "
+"la construction dans un sous-répertoire, qui sera ensuite supprimé lors du "
+"B<clean> :"
+
+# type: verbatim
+#. type: verbatim
+#: dh:212
+#, no-wrap
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --builddirectory=build\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --builddirectory=build\n"
+"\n"
+
+#. type: textblock
+#: dh:216
+msgid ""
+"If your package can be built in parallel, you can support parallel building "
+"as follows. Then B<dpkg-buildpackage -j> will work."
+msgstr ""
+"Si le paquet peut être construit en parallèle, vous pouvez activer le "
+"parallélisme comme ci-dessous. Alors B<dpkg-buildpackage -j> fonctionnera."
+
+# type: verbatim
+#. type: verbatim
+#: dh:219
+#, no-wrap
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --parallel\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --parallel\n"
+"\n"
+
+#. type: textblock
+#: dh:223
+msgid ""
+"Here is a way to prevent B<dh> from running several commands that you don't "
+"want it to run, by defining empty override targets for each command."
+msgstr ""
+"Voici un moyen d'empêcher B<dh> d'exécuter plusieurs commandes, en "
+"définissant des blocs de substitution vides pour chaque commande que vous ne "
+"voulez pas lancer."
+
+# type: verbatim
+#. type: verbatim
+#: dh:226 dh:237 dh:254
+#, no-wrap
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@\n"
+"\t\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@\n"
+"\t\n"
+
+#. type: verbatim
+#: dh:230
+#, no-wrap
+msgid ""
+"\t# Commands not to run:\n"
+"\toverride_dh_auto_test override_dh_compress override_dh_fixperms:\n"
+"\n"
+msgstr ""
+"\t# Commandes que l'on ne veut pas exécuter :\n"
+"\toverride_dh_auto_test override_dh_compress override_dh_fixperms:\n"
+"\n"
+
+#. type: textblock
+#: dh:233
+msgid ""
+"Sometimes, you may need to make an override target only run commands when a "
+"particular package is being built. This can be accomplished using "
+"L<dh_listpackages(1)> to test what is being built. For example:"
+msgstr ""
+"Parfois, il peut être utile de substituer une commande seulement lors de la "
+"construction d'un paquet particulier. Ceci est réalisable à l'aide de "
+"L<dh_listpackages(1)> pour connaître le paquet en cours de construction. Par "
+"exemple :"
+
+# type: verbatim
+#. type: verbatim
+#: dh:241
+#, no-wrap
+msgid ""
+"\toverride_dh_fixperms:\n"
+"\t\tdh_fixperms\n"
+"\tifneq (,$(filter foo, $(shell dh_listpackages)))\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\tendif\n"
+"\n"
+msgstr ""
+"\toverride_dh_fixperms:\n"
+"\t\tdh_fixperms\n"
+"\tifneq (,$(filter toto, $(shell dh_listpackages)))\n"
+"\t\tchmod 4755 debian/toto/usr/bin/toto\n"
+"\tendif\n"
+"\n"
+
+#. type: textblock
+#: dh:247
+#, fuzzy
+#| msgid ""
+#| "Finally, remember that you are not limited to using override targets in "
+#| "the rules file when using B<dh>. You can also explicitly define any of "
+#| "the regular rules file targets when it makes sense to do so. A common "
+#| "reason to do this is if your package needs different B<build-arch> and "
+#| "B<build-indep> targets. For example, a package with a long document build "
+#| "process can put it in B<build-indep> to avoid build daemons redundantly "
+#| "building the documentation."
+msgid ""
+"Finally, remember that you are not limited to using override targets in the "
+"rules file when using B<dh>. You can also explicitly define any of the "
+"regular rules file targets when it makes sense to do so. A common reason to "
+"do this is when your package needs different B<build-arch> and B<build-"
+"indep> targets. For example, a package with a long document build process "
+"can put it in B<build-indep>."
+msgstr ""
+"Enfin, n'oubliez pas que vous n'êtes pas limité à la seule substitution de "
+"blocs dans le fichier rules lors de l'utilisation de B<dh>. Vous pouvez "
+"également redéfinir explicitement les blocs standard du fichier rules "
+"lorsqu'il est logique de le faire. Une raison courante de cette démarche se "
+"présente lorsque le paquet requiert des traitements différents en B<build-"
+"arch> et en B<build-indep>. Par exemple, la génération de la documentation "
+"volumineuse d'un paquet peut être placé en B<build-indep> pour éviter que "
+"cette génération soit refaite pour chacune des architectures."
+
+#. type: verbatim
+#: dh:258
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\tbuild: build-arch build-indep ;\n"
+#| "\tbuild-indep:\n"
+#| "\t\t$(MAKE) docs\n"
+#| "\tbuild-arch:\n"
+#| "\t\t$(MAKE) bins\n"
+#| "\n"
+msgid ""
+"\tbuild-indep:\n"
+"\t\t$(MAKE) docs\n"
+"\tbuild-arch:\n"
+"\t\t$(MAKE) bins\n"
+"\n"
+msgstr ""
+"\tbuild: build-arch build-indep ;\n"
+"\tbuild-indep:\n"
+"\t\t$(MAKE) docs\n"
+"\tbuild-arch:\n"
+"\t\t$(MAKE) bins\n"
+"\n"
+
+#. type: textblock
+#: dh:263
+msgid ""
+"Note that in the example above, dh will arrange for \"debian/rules build\" "
+"to call your build-indep and build-arch targets. You do not need to "
+"explicitly define those dependencies in the rules file when using dh with "
+"compatibility level v9. This example would be more complicated with earlier "
+"compatibility levels."
+msgstr ""
+
+#. type: =head1
+#: dh:269
+msgid "INTERNALS"
+msgstr "FONCTIONNEMENT INTERNE"
+
+#. type: textblock
+#: dh:271
+msgid ""
+"If you're curious about B<dh>'s internals, here's how it works under the "
+"hood."
+msgstr ""
+"Si vous êtes curieux de connaître le fonctionnement interne de B<dh>, voici "
+"ce qu'il y a sous le capot."
+
+# type: textblock
+#. type: textblock
+#: dh:273
+msgid ""
+"Each debhelper command will record when it's successfully run in F<debian/"
+"package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can tell which "
+"commands have already been run, for which packages, and skip running those "
+"commands again."
+msgstr ""
+"Chaque commande debhelper, qui s'accomplit correctement, est journalisée "
+"dans F<debian/package.debhelper.log> (que B<dh_clean> supprimera). Ainsi "
+"B<dh> peut déterminer quelles commandes ont déjà été exécutées et pour quels "
+"paquets. De cette manière il pourra passer outre l'exécution de ces "
+"commandes ultérieurement."
+
+# type: textblock
+#. type: textblock
+#: dh:278
+msgid ""
+"Each time B<dh> is run, it examines the log, and finds the last logged "
+"command that is in the specified sequence. It then continues with the next "
+"command in the sequence. The B<--until>, B<--before>, B<--after>, and B<--"
+"remaining> options can override this behavior."
+msgstr ""
+"Chaque fois que B<dh> est exécuté, il examine le journal et recherche la "
+"dernière commande exécutée dans la séquence spécifiée. Puis il exécute la "
+"commande suivante dans cette séquence. Les options B<--until>, B<--before>, "
+"B<--after> et B<--remaining> permettent de modifier ce comportement."
+
+#. type: textblock
+#: dh:283
+msgid ""
+"A sequence can also run dependent targets in debian/rules. For example, the "
+"\"binary\" sequence runs the \"install\" target."
+msgstr ""
+
+#. type: textblock
+#: dh:286
+msgid ""
+"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
+"information through to debhelper commands that are run inside override "
+"targets. The contents (and indeed, existence) of this environment variable, "
+"as the name might suggest, is subject to change at any time."
+msgstr ""
+"B<dh> utilise la variable d'environnement B<DH_INTERNAL_OPTIONS> pour "
+"transmettre des informations aux commandes debhelper exécutées au sein des "
+"blocs surchargés. Le contenu (et l'existence même) de cette variable "
+"d'environnement, comme son nom l'indique, est sujet à des modifications "
+"permanentes."
+
+# type: textblock
+#. type: textblock
+#: dh:868 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
+#: dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144
+#: dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84
+#: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173
+#: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88
+#: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108
+#: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277
+#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:260
+#: dh_installmanpages:199 dh_installmime:97 dh_installmodules:126
+#: dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110
+#: dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260
+#: dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282
+#: dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29
+#: dh_undocumented:30 dh_usrlocal:116
+msgid "L<debhelper(7)>"
+msgstr "L<debhelper(7)>"
+
+# type: textblock
+#. type: textblock
+#: dh:870 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
+#: dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127
+#: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103
+#: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175
+#: dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90
+#: dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110
+#: dh_installifupdown:73 dh_installinfo:81 dh_installinit:279
+#: dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201
+#: dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63
+#: dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91
+#: dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262
+#: dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284
+#: dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121
+#: dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
+msgid "This program is a part of debhelper."
+msgstr "Ce programme fait partie de debhelper."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_build:5
+msgid "dh_auto_build - automatically builds a package"
+msgstr "dh_auto_build - construit automatiquement un paquet"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_build:14
+msgid ""
+"B<dh_auto_build> [S<I<build system options>>] [S<I<debhelper options>>] "
+"[S<B<--> I<params>>]"
+msgstr ""
+"B<dh_auto_build> [I<options du processus de construction>] "
+"[I<options debhelper>] [B<--> I<paramètres>]"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_build:18
+msgid ""
+"B<dh_auto_build> is a debhelper program that tries to automatically build a "
+"package. It does so by running the appropriate command for the build system "
+"it detects the package uses. For example, if a F<Makefile> is found, this is "
+"done by running B<make> (or B<MAKE>, if the environment variable is set). If "
+"there's a F<setup.py>, or F<Build.PL>, it is run to build the package."
+msgstr ""
+"B<dh_auto_build> est un programme de la suite debhelper qui tente de "
+"construire automatiquement un paquet. Il le fait en lançant les commandes "
+"appropriées du processus de construction d'après le type du paquet. Par "
+"exemple, s'il trouve un fichier F<Makefile>, il construit le paquet avec "
+"B<make> (ou B<MAKE> si les variables d'environnement sont définies). S'il y "
+"a un fichier F<setup.py> ou F<Built.PL> il les lance pour réaliser la "
+"construction du paquet."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_build:24
+msgid ""
+"This is intended to work for about 90% of packages. If it doesn't work, "
+"you're encouraged to skip using B<dh_auto_build> at all, and just run the "
+"build process manually."
+msgstr ""
+"B<dh_auto_build> fonctionne avec 90% des paquets environ. Si ça ne "
+"fonctionne pas, il suffit de sauter B<dh_auto_build> et d'exécuter le "
+"processus manuellement."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_build:30 dh_auto_clean:32 dh_auto_configure:33 dh_auto_install:45
+#: dh_auto_test:32
+msgid ""
+"See L<debhelper(7)/B<BUILD SYSTEM OPTIONS>> for a list of common build "
+"system selection and control options."
+msgstr ""
+"Consulter B<OPTIONS DU PROCESSUS DE CONSTRUCTION> dans L<debhelper(7)> pour "
+"obtenir la liste des processus de construction courants et celle des options "
+"de contrôle."
+
+# type: =item
+#. type: =item
+#: dh_auto_build:35 dh_auto_clean:37 dh_auto_configure:38 dh_auto_install:56
+#: dh_auto_test:37 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69
+#: dh_installinit:99 dh_makeshlibs:91 dh_shlibdeps:37
+msgid "B<--> I<params>"
+msgstr "B<--> I<paramètres>"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_build:37
+msgid ""
+"Pass I<params> to the program that is run. These can be used to supplement "
+"or override any standard parameters that B<dh_auto_build> passes."
+msgstr ""
+"Transmet les I<paramètres> au programme exécuté. Ceci peut être utilisé en "
+"complément ou en remplacement de tous les paramètres standard que "
+"b<dh_auto_build> transmet."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_clean:5
+msgid "dh_auto_clean - automatically cleans up after a build"
+msgstr ""
+"dh_auto_clean - fait le ménage automatiquement après une construction de "
+"paquet"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_clean:15
+msgid ""
+"B<dh_auto_clean> [S<I<build system options>>] [S<I<debhelper options>>] "
+"[S<B<--> I<params>>]"
+msgstr ""
+"B<dh_auto_clean> [I<options du processus de construction>] "
+"[I<options de debhelper>] [B<--> I<paramètres>]"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_clean:19
+msgid ""
+"B<dh_auto_clean> is a debhelper program that tries to automatically clean up "
+"after a package build. It does so by running the appropriate command for the "
+"build system it detects the package uses. For example, if there's a "
+"F<Makefile> and it contains a B<distclean>, B<realclean>, or B<clean> "
+"target, then this is done by running B<make> (or B<MAKE>, if the environment "
+"variable is set). If there is a F<setup.py> or F<Build.PL>, it is run to "
+"clean the package."
+msgstr ""
+"B<dh_auto_clean> est un programme de la suite debhelper qui tente de faire "
+"le ménage après une construction de paquet. Il le fait en lançant les "
+"commandes appropriées du processus de construction d'après le type du "
+"paquet. Par exemple, s'il trouve un fichier F<Makefile> et qu'il contient "
+"une instruction B<distclean>, B<realclean>, B<clean>, il fait le ménage en "
+"exécutant B<make> (ou B<MAKE> si cette variable d'environnement est "
+"définie). S'il y a un fichier F<setup.py> ou F<Built.PL> il les lance pour "
+"réaliser le ménage du paquet."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_clean:26
+msgid ""
+"This is intended to work for about 90% of packages. If it doesn't work, or "
+"tries to use the wrong clean target, you're encouraged to skip using "
+"B<dh_auto_clean> at all, and just run B<make clean> manually."
+msgstr ""
+"B<dh_auto_clean> fonctionne avec 90% des paquets environ. Si ça ne "
+"fonctionne pas ou que B<dh_auto_clean> tente d'utiliser une mauvaise "
+"instruction de ménage, il suffit de sauter B<dh_auto_clean> et de lancer "
+"manuellement B<make clean>."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_clean:39
+msgid ""
+"Pass I<params> to the program that is run. These can be used to supplement "
+"or override the any standard parameters that B<dh_auto_clean> passes."
+msgstr ""
+"Transmet les I<paramètres> au programme exécuté. Ceci peut être utilisé en "
+"complément ou en remplacement de tous les paramètres standard que "
+"B<dh_auto_clean> transmet."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_configure:5
+msgid "dh_auto_configure - automatically configure a package prior to building"
+msgstr ""
+"dh_auto_configure - configure automatiquement un paquet préalablement à sa "
+"construction"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_configure:14
+msgid ""
+"B<dh_auto_configure> [S<I<build system options>>] [S<I<debhelper options>>] "
+"[S<B<--> I<params>>]"
+msgstr ""
+"B<dh_auto_configure> [I<options du processus de construction>] "
+"[I<options de debhelper>] [B<--> I<paramètres>]"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_configure:18
+msgid ""
+"B<dh_auto_configure> is a debhelper program that tries to automatically "
+"configure a package prior to building. It does so by running the appropriate "
+"command for the build system it detects the package uses. For example, it "
+"looks for and runs a F<./configure> script, F<Makefile.PL>, F<Build.PL>, or "
+"F<cmake>. A standard set of parameters is determined and passed to the "
+"program that is run. Some build systems, such as make, do not need a "
+"configure step; for these B<dh_auto_configure> will exit without doing "
+"anything."
+msgstr ""
+"B<dh_auto_configure> est un programme de la suite debhelper qui tente de "
+"configurer automatiquement un paquet préalablement à sa construction. Il le "
+"fait en lançant les commandes appropriées du processus de construction "
+"d'après le type du paquet. Par exemple, il cherche puis exécute un script "
+"F<./configure>, un fichier F<Makefile.PL>, F<Build.PL> ou F<cmake>. Un jeu "
+"de paramètres standard est déterminé et passé en argument au programme "
+"lancé. Certains processus de construction, tels que B<make>, n'ont pas "
+"besoin de configuration préalable. Dans ce cas B<dh_auto_configure> s'arrête "
+"sans rien faire."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_configure:27
+msgid ""
+"This is intended to work for about 90% of packages. If it doesn't work, "
+"you're encouraged to skip using B<dh_auto_configure> at all, and just run "
+"F<./configure> or its equivalent manually."
+msgstr ""
+"B<dh_auto_configure> fonctionne avec 90% des paquets environ. Si ça ne "
+"fonctionne pas, il suffit de sauter B<dh_auto_configure> et de lancer "
+"manuellement F<./configure> ou son équivalent."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_configure:40
+msgid ""
+"Pass I<params> to the program that is run, after the standard parameters "
+"that B<dh_auto_configure> passes. This can be used to supplement or override "
+"those parameters. For example:"
+msgstr ""
+"Transmet les I<paramètres> au programme exécuté. Ceci peut être utilisé en "
+"complément ou en remplacement de tous les paramètres standard que "
+"B<dh_auto_configure> transmet. par exemple :"
+
+# type: verbatim
+#. type: verbatim
+#: dh_auto_configure:44
+#, no-wrap
+msgid ""
+" dh_auto_configure -- --with-foo --enable-bar\n"
+"\n"
+msgstr ""
+" dh_auto_configure -- --with-toto --enable-titi\n"
+"\n"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_install:5
+msgid "dh_auto_install - automatically runs make install or similar"
+msgstr "dh_auto_install - lance automatiquement make install ou équivalent"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_install:17
+msgid ""
+"B<dh_auto_install> [S<I<build system options>>] [S<I<debhelper options>>] "
+"[S<B<--> I<params>>]"
+msgstr ""
+"B<dh_auto_install> [I<options du processus de construction>] "
+"[I<options de debhelper>] [B<--> I<paramètres>]"
+
+# type: textblock
+#. type: textblock
+#: dh_auto_install:21
+msgid ""
+"B<dh_auto_install> is a debhelper program that tries to automatically "
+"install built files. It does so by running the appropriate command for the "
+"build system it detects the package uses. For example, if there's a "
+"F<Makefile> and it contains a B<install> target, then this is done by "
+"running B<make> (or B<MAKE>, if the environment variable is set). If there "
+"is a F<setup.py> or F<Build.PL>, it is used. Note that the Ant build system "
+"does not support installation, so B<dh_auto_install> will not install files "
+"built using Ant."
+msgstr ""
+"B<dh_auto_install> est un programme de la suite debhelper qui tente "
+"d'installer automatiquement les fichiers construits. Il le fait en lançant "
+"les commandes appropriées du processus de construction d'après le type du "
+"paquet. Par exemple, s'il y a un F<Makefile> et qu'il contient un bloc "
+"B<install> il exécutera B<make> (ou B<MAKE> si les variables d'environnement "
+"sont définies). S'il y a un F<setup.py> ou un F<Build.PL>, il l'utilisera. "
+"Nota : le processus de construction B<Ant> ne comporte pas de processus "
+"d'installation. De ce fait b<dh_auto_install> n'installera pas les fichiers "
+"construits avec B<Ant>."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_install:29
+msgid ""
+"Unless B<--destdir> option is specified, the files are installed into debian/"
+"I<package>/ if there is only one binary package. In the multiple binary "
+"package case, the files are instead installed into F<debian/tmp/>, and "
+"should be moved from there to the appropriate package build directory using "
+"L<dh_install(1)>."
+msgstr ""
+"À moins que l'option B<--destdir> soit spécifiée; les fichiers sont "
+"installés dans debian/I<Paquet>/ s'il n'y a qu'un seul paquet binaire. Dans "
+"le cas de paquets binaires multiples, les fichiers seront installés dans "
+"F<debian/tmp> et pourront être déplacés vers le répertoire de construction "
+"approprié du paquet en utilisant L<dh_install(1)>."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_install:35
+msgid ""
+"B<DESTDIR> is used to tell make where to install the files. If the Makefile "
+"was generated by MakeMaker from a F<Makefile.PL>, it will automatically set "
+"B<PREFIX=/usr> too, since such Makefiles need that."
+msgstr ""
+"B<DESTDIR> est utilisé pour indiquer à make où installer les fichiers. Si le "
+"Makefile a été produit par MakeMaker à partir d'un F<Makefile.PL>, cette "
+"variable sera automatiquement définie à B<PREFIX=/usr> car ces Makefiles en "
+"ont besoin."
+
+# type: textblock
+#. type: textblock
+#: dh_auto_install:39
+msgid ""
+"This is intended to work for about 90% of packages. If it doesn't work, or "
+"tries to use the wrong install target, you're encouraged to skip using "
+"B<dh_auto_install> at all, and just run make install manually."
+msgstr ""
+"B<dh_auto_install> fonctionne avec 90% des paquets environ. Si ça ne "
+"fonctionne pas ou si B<dh_auto_install> tente d'utiliser une mauvaise "
+"méthode d'installation, il suffit de sauter B<dh_auto_install> et de lancer "
+"manuellement make install."
+
+# type: =item
+#. type: =item
+#: dh_auto_install:50 dh_builddeb:25
+msgid "B<--destdir=>I<directory>"