+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "It automatically generates the postinst and prerm fragments needed to "
+#~ "register and unregister the schemas in usr/share/gconf/schemas, using "
+#~ "gconf-schemas."
+#~ msgstr ""
+#~ "Genera automáticamente los fragmentos en los scripts de postinst y prerm "
+#~ "necesarios para registrar y des-registrar los esquemas en usr/share/gconf/"
+#~ "schemas. Estos fragmentos usarán gconftool-2, así que el paquete deberá "
+#~ "depender de gconf2. Este programa añadirá una dependencia a ${misc:"
+#~ "Depends}."
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "Installed into usr/share/gconf/defaults/10_package in the package build "
+#~ "directory, with \"I<package>\" replaced by the package name. Some "
+#~ "postinst and postrm fragments will be generated to run update-gconf-"
+#~ "defaults."
+#~ msgstr ""
+#~ "Si existe un fichero llamado debian/paquete.default, se instala en etc/"
+#~ "default/paquete en el directorio de construcción del paquete, con "
+#~ "\"paquete\" reemplazado por el nombre del paquete."
+
+# type: =head2
+#~ msgid "Doc directory symlinks"
+#~ msgstr "Enlaces a los directorios Doc"
+
+# type: textblock
+#~ msgid ""
+#~ "Sometimes it is useful to make a package not contain a /usr/share/doc/"
+#~ "package directory at all, instead placing just a dangling symlink in the "
+#~ "binary package, that points to some other doc directory. Policy says this "
+#~ "is ok if your package depends on the package whose doc directory it uses. "
+#~ "To accomplish this, just don't tell debhelper to install any "
+#~ "documentation files into the package, and use dh_link to set up the "
+#~ "symlink (or do it by hand), and debhelper should do the right thing: "
+#~ "notice it is a dangling symlink and not try to install a copyright file "
+#~ "or changelog."
+#~ msgstr ""
+#~ "A veces es útil hacer que un paquete no tenga un directorio /usr/share/"
+#~ "doc/paquete, en vez de esto se hará un enlace colgando en el paquete "
+#~ "binario que apunte a otro directorio de documentación. La política de "
+#~ "Debian permite esto mientras mientras el paquete dependa del paquete al "
+#~ "que pertenece el directorio de documentación que está usando. Para "
+#~ "conseguir esto, lo único que hay que hacer es no decirle a debhelper que "
+#~ "cree ningún directorio con documentación y usar dh_link para crear el "
+#~ "enlace (o crear el enlace a mano), y debhelper hará lo correcto: se dará "
+#~ "cuenta de que es un enlace colgante y no tratará de instalar un fichero "
+#~ "de copyright o changelog."
+
+# type: textblock
+#~ msgid ""
+#~ "dh_installchangelogs determines if the package is a debian native "
+#~ "package, and if so, it installs debian/changelog into usr/share/doc/"
+#~ "package/changelog in the package build directory. Otherwise, it installs "
+#~ "debian/changelog into usr/share/doc/package/changelog.Debian in the "
+#~ "package build directory. (If files named debian/package.changelog exist, "
+#~ "they will be used in preference to debian/changelog.)"
+#~ msgstr ""
+#~ "dh_installchangelogs determina si el paquete es un paquete nativo de "
+#~ "Debian, y si es así, instala debian/changelog en usr/share/doc/paquete/"
+#~ "changelog en el directorio de construcción del paquete. En otro caso, "
+#~ "instala debian/changelog en usr/share/doc/paquete/changelog.Debian en el "
+#~ "directorio de construcción del paquete. (Si existen ficheros llamados "
+#~ "debian/paquete.changelog, se usarán preferentemente en vez de debian/"
+#~ "changelog.)"
+
+# type: textblock
+#~ msgid ""
+#~ "Parallelling the debian changelog handling, this program also takes care "
+#~ "of NEWS.Debian files. If there is a debian/NEWS file, it is installed as "
+#~ "usr/share/doc/package/NEWS.Debian. debian/package.NEWS files can also be "
+#~ "used."
+#~ msgstr ""
+#~ "Paralelamente al manejo de los ficheros de cambios, este programa también "
+#~ "tiene en cuenta los ficheros NEWS. Si hay un fichero debian/NEWS, se "
+#~ "instala como usr/share/doc/paquete/NEWS.Debian. También pueden usarse "
+#~ "ficheros debian/paquete.NEWS."
+
+# type: textblock
+#~ msgid ""
+#~ "dh_installcron is a debhelper program that is responsible for installing "
+#~ "cron scripts into etc/cron.*/ in package build directories. The files "
+#~ "debian/package.cron.daily, debian/package.cron.weekly, debian/package."
+#~ "cron.monthly, debian/package.cron.hourly, and debian/package.cron.d are "
+#~ "installed."
+#~ msgstr ""
+#~ "dh_installcron es un programa de debhelper responsable de instalar "
+#~ "scripts para cron en etc/cron.*/ en los directorios de construcción del "
+#~ "paquete. Se instalan los ficheros debian/paquete.cron.daily, debian/"
+#~ "paquete.cron.weekly, debian/paquete.cron.monthly, debian/paquete.cron."
+#~ "hourly, y debian/paquete.cron.d."
+
+# type: textblock
+#~ msgid ""
+#~ "Files named debian/package.config and debian/package.templates are "
+#~ "installed into the DEBIAN directory in the package build directory. If a "
+#~ "file named debian/package.config.debhelper exists, the contents of that "
+#~ "file are merged into the config script as follows: If the script exists, "
+#~ "then anywhere in it that \"#DEBHELPER#\" appears, the text of the ."
+#~ "debhelper file is inserted. If the script does not exist, then a script "
+#~ "is generated from the .debhelper file. The .debhelper files may be "
+#~ "created by other debhelper programs, and are shell script fragments."
+#~ msgstr ""
+#~ "Los ficheros con el nombre debian/paquete.config y debian/paquete."
+#~ "templates se instalan en el directorio DEBIAN en el directorio de "
+#~ "construcción del paquete. Si existe un fichero con el nombre debian/"
+#~ "paquete.config.debhelper, los contenidos de ese fichero se mezclan con "
+#~ "los del script «config» del siguiente modo: Si el script existe, entonces "
+#~ "en todos los sitios donde aparezca «#DEBHELPER#», se inserta el texto del "
+#~ "fichero .debhelper. Si no existe, se genera desde el fichero .debhelper. "
+#~ "Los ficheros .debhelper pueden ser creados por otros programas de "
+#~ "debhelper, y son fragmentos de scripts línea de órdenes."
+
+# type: =head1
+#~ msgid "LOCALIZED TEMPLATE FILES"
+#~ msgstr "FICHEROS DE PLANTILLAS TRADUCIDOS"
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "This program will look to see if you have a debian/po directory and if so "
+#~ "will automatically call L<po2debconf(1)> to generate a merged templates "
+#~ "file containing the translations. For this to work, your package should "
+#~ "build-depend on po-debconf."
+#~ msgstr ""
+#~ "Este programa mirará si tiene el directorio debian/po y si es así llamará "
+#~ "automáticamente a L<po2debconf(1)> para generar un fichero de plantilla "
+#~ "conjunto. O si tiene ficheros debian/templates.ll, usará el programa más "
+#~ "antiguo L<debconf-mergetemplate(1)> para juntarlos."
+
+# type: verbatim
+#, fuzzy
+#~ msgid ""
+#~ "dh_installdeb automatically installs the following files from debian/ "
+#~ "into\n"
+#~ "the DEBIAN directory:\n"
+#~ " package.postinst\n"
+#~ " package.preinst\n"
+#~ " package.postrm\n"
+#~ " package.prerm\n"
+#~ " package.shlibs\n"
+#~ " package.conffiles\n"
+#~ " package.triggers\n"
+#~ "\n"
+#~ msgstr ""
+#~ "dh_installdeb instala automáticamente los siguientes ficheros de debian/ "
+#~ "en\n"
+#~ "el directorio DEBIAN:\n"
+#~ " paquete.postinst\n"
+#~ " paquete.preinst\n"
+#~ " paquete.postrm\n"
+#~ " paquete.prerm\n"
+#~ " paquete.shlibs\n"
+#~ " paquete.conffiles\n"
+#~ "\n"
+
+# type: textblock
+#~ msgid ""
+#~ "The postinst, preinst, postrm, and prerm are handled specially: If a "
+#~ "corresponding file named debian/package.script.debhelper exists, the "
+#~ "contents of that file are merged into the script as follows: If the "
+#~ "script exists, then anywhere in it that \"#DEBHELPER#\" appears, the text "
+#~ "of the .debhelper file is inserted. If the script does not exist, then a "
+#~ "script is generated from the .debhelper file. The .debhelper files are "
+#~ "created by other debhelper programs, such as L<dh_installmenu(1)>, and "
+#~ "are shell script fragments."
+#~ msgstr ""
+#~ "postinst, preinst, postrm, y prerm se manejan de forma especial: Si "
+#~ "existe un fichero correspondiente llamado debian/paquete.script."
+#~ "debhelper, los contenidos de ese fichero se unen con los del script del "
+#~ "siguiente modo: Si el script existe, entonces en cualquier lugar de este "
+#~ "donde aparezca \"#DEBHELPER#\", se inserta el texto del fichero ."
+#~ "debhelper. Si el script no existe, se genera un script desde el fichero ."
+#~ "debhelper. Los ficheros .debhelper son creados por otros programas de "
+#~ "debhelper , como L<dh_installmenu(1)>, y son fragmentos de scripts de "
+#~ "shell."
+
+# type: textblock
+#, fuzzy
+#~ msgid "A file named debian/package.dirs can list directories to be created."
+#~ msgstr ""
+#~ "Los ficheros debian/paquete.docs pueden listar otros ficheros a instalar."
+
+# type: textblock
+#~ msgid ""
+#~ "Any directory names specified as parameters will be created in the "
+#~ "package build directory of the first package dh_installdirs is told to "
+#~ "act on. By default, this is the first binary package in debian/control, "
+#~ "but if you use -p, -i, or -a flags, it will be the first package "
+#~ "specified by those flags."
+#~ msgstr ""
+#~ "Cualquier nombre de directorio especificado como parámetro se creará en "
+#~ "el directorio de construcción del primer paquete sobre el que actúe "
+#~ "dh_installdirs. Por omisión, es el primer paquete binario en debian/"
+#~ "control, pero si usa las opciones -p, -i, o -a, será el primer paquete "
+#~ "especificado por esas opciones."
+
+# type: textblock
+#~ msgid ""
+#~ "dh_installdocs automatically installs debian/copyright if it exists. If "
+#~ "dh_installdocs is acting on multiple packages, debian/copyright files "
+#~ "will be installed into all packages. However, if you need to have "
+#~ "separate copyright files for different binary packages, you can use files "
+#~ "named debian/package.copyright."
+#~ msgstr ""
+#~ "dh_installdocs automáticamente instala debian/copyright si es que existe. "
+#~ "Si dh_installdocs actúa en múltiples paquetes, los ficheros debian/"
+#~ "copyright se copiarán en todos ellos. Sin embargo, si necesita tener un "
+#~ "fichero copyright separado para cada paquete binario, puede usar ficheros "
+#~ "llamados debian/paquete.copyright."
+
+# type: textblock
+#~ msgid ""
+#~ "Any filenames specified as parameters will be installed into the first "
+#~ "package dh_installdocs is told to act on. By default, this is the first "
+#~ "binary package in debian/control, but if you use B<-p>, B<-i>, or B<-a> "
+#~ "flags, it will be the first package specified by those flags."
+#~ msgstr ""
+#~ "Cualquier fichero especificado como parámetro se instalará en el primer "
+#~ "paquete sobre el que actúe dh_installdocs. Por omisión, este es el primer "
+#~ "paquete binario en debian/control, pero si usa alguna de las opciones B<-"
+#~ "p>, B<-i>, o B<-a>, será el primer paquete especificado por estas."
+
+# type: textblock
+#~ msgid ""
+#~ "Also, debian/README.Debian (or debian/README.debian) and debian/TODO, if "
+#~ "they exist, will be installed into the first binary package listed in "
+#~ "debian/control, if dh_installdocs is acting on that package. Note that "
+#~ "debian/TODO will be installed named TODO.Debian, if the package is not a "
+#~ "debian native package. Also note that README.debian is installed as "
+#~ "README.Debian, for consistency. Note that debian/package.README.Debian "
+#~ "and debian/package.TODO can be used to specify files for subpackages."
+#~ msgstr ""
+#~ "Además, debian/README.Debian (o debian/README.debian) y debian/TODO, si "
+#~ "existen, se instalan en el primer paquete binario listado en debian/"
+#~ "control, si dh_installdocs está actuando sobre ese paquete. Note que "
+#~ "debian/TODO se instalará con el nombre TODO.Debian si el paquete no es un "
+#~ "paquete nativo de Debian. Además dese cuenta que README.debian se instala "
+#~ "como README.Debian, por consistencia. Tenga en cuenta que debian/paquete."
+#~ "README.Debian y debian/paquete.TODO pueden usarse para especificar "
+#~ "ficheros para subpaquetes."
+
+# type: textblock
+#~ msgid ""
+#~ "If a file named debian/package.emacsen-install exists, then it is "
+#~ "installed into usr/lib/emacsen-common/packages/install/package in the "
+#~ "package build directory. Similarly, debian/package.emacsen-remove is "
+#~ "installed into usr/lib/emacsen-common/packages/remove/package . And "
+#~ "similarly, debian/package.emacsen-startup is installed into etc/emacs/"
+#~ "site-start.d/50<package>.el (by default)."
+#~ msgstr ""
+#~ "Si existe un fichero llamado debian/paquete.emacsen-install, entonces se "
+#~ "instala en usr/lib/emacsen-common/packages/install/paquete en el "
+#~ "directorio de construcción del paquete. De forma similar, debian/paquete."
+#~ "emacsen-remove se instala en usr/lib/emacsen-common/packages/remove/"
+#~ "paquete. Y debian/paquete.emacsen-startup se instala en etc/emacs/site-"
+#~ "start.d/50<paquete>.el (por omisión)."
+
+# type: textblock
+#~ msgid ""
+#~ "Any file names specified as parameters will be installed into the first "
+#~ "package dh_installexamples is told to act on. By default, this is the "
+#~ "first binary package in debian/control, but if you use -p, -i, or -a "
+#~ "flags, it will be the first package specified by those flags."
+#~ msgstr ""
+#~ "Cualquier fichero especificado como parámetro se instalará en el primer "
+#~ "paquete sobre el que actúe dh_installexamples. Por omisión, este es el "
+#~ "primer paquete binario en debian/control, pero si usa alguna de las "
+#~ "opciones B<-p>, B<-i>, o B<-a>, será el primer paquete especificado por "
+#~ "estas."
+
+# type: textblock
+#~ msgid ""
+#~ "Files named debian/package.examples can list other files to be installed."
+#~ msgstr ""
+#~ "Los ficheros debian/paquete.examples pueden listar otros ficheros a "
+#~ "instalar."
+
+# type: textblock
+#~ msgid ""
+#~ "Any filenames specified as parameters will be installed into the first "
+#~ "package dh_installinfo is told to act on. By default, this is the first "
+#~ "binary package in debian/control, but if you use -p, -i, or -a flags, it "
+#~ "will be the first package specified by those flags."
+#~ msgstr ""
+#~ "Cualquier fichero especificado como parámetro se instalará en el primer "
+#~ "paquete sobre el que actúe dh_installinfo. Por omisión, este es el primer "
+#~ "paquete binario en debian/control, pero si usar las opciones -p, -i, o -"
+#~ "a, será el primer paquete listado en esas opciones."
+
+# type: textblock
+#~ msgid ""
+#~ "Files named debian/package.info can list other files to be installed."
+#~ msgstr ""
+#~ "Ficheros llamados debian/paquete.info pueden listar otros ficheros a "
+#~ "instalar."
+
+# type: textblock
+#~ msgid ""
+#~ "If a file named debian/package.init exists, then it is installed into etc/"
+#~ "init.d/package in the package build directory, with \"package\" replaced "
+#~ "by the package name."
+#~ msgstr ""
+#~ "Si existe un fichero debian/paquete.init, se instala en etc/init.d/"
+#~ "paquete en el directorio de construcción del paquete, con \"paquete\" "
+#~ "reemplazado por el nombre del paquete."
+
+# type: textblock
+#~ msgid ""
+#~ "If a file named debian/package.default exists, then it is installed into "
+#~ "etc/default/package in the package build directory, with \"package\" "
+#~ "replaced by the package name."
+#~ msgstr ""
+#~ "Si existe un fichero llamado debian/paquete.default, se instala en etc/"
+#~ "default/paquete en el directorio de construcción del paquete, con "
+#~ "\"paquete\" reemplazado por el nombre del paquete."
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "dh_installlogcheck is a debhelper program that is responsible for "
+#~ "installing logcheck rule files into subdirectories of etc/logcheck/ in "
+#~ "package build directories. The files debian/package.logcheck.cracking, "
+#~ "debian/package.logcheck.violations, debian/package.logcheck.violations."
+#~ "ignore, debian/package.logcheck.ignore.workstation, debian/package."
+#~ "logcheck.ignore.server and debian/package.logcheck.ignore.paranoid are "
+#~ "installed if present."
+#~ msgstr ""
+#~ "dh_installlocgheck es un programa de debhelper responsable de instalar "
+#~ "fichero de normas para logcheck en subdirectorios de etc/logcheck/ en los "
+#~ "directorios de construcción del paquete. Los fichero debian/quete."
+#~ "logcheck.cracking, debian/paquete.logcheck.violations, debian/paquete."
+#~ "logcheck.violations.ignore, debian/paquete.logcheck.ignore.workstation, "
+#~ "debian/paquete.logcheck.ignore.server y debian/paquete.logcheck.ignore."
+#~ "paranoid se instalan si están presentes."
+
+# type: textblock
+#~ msgid ""
+#~ "Any man page filenames specified as parameters will be installed into the "
+#~ "first package dh_installman is told to act on. By default, this is the "
+#~ "first binary package in debian/control, but if you use -p, -i, or -a "
+#~ "flags, it will be the first package specified by those flags."
+#~ msgstr ""
+#~ "Cualquier página del manual especificada como parámetro se instalará en "
+#~ "el primer paquete sobre el que actúe dh_installman. Por omisión, este es "
+#~ "el primer paquete binario en debian/control, pero si usa las opciones -p, "
+#~ "-i, o -a, será el primer paquete especificado por estas opciones."
+
+# type: textblock
+#~ msgid ""
+#~ "Files named debian/package.manpages can list other man pages to be "
+#~ "installed."
+#~ msgstr ""
+#~ "Fichero llamado debian/paquete.manpages pueden listar otras páginas del "
+#~ "manual a instalar."
+
+# type: textblock
+#~ msgid ""
+#~ "If a file named debian/package.menu-method exits, then it is installed "
+#~ "into etc/menu-methods/package in the package build directory. This is a "
+#~ "debian menu method file."
+#~ msgstr ""
+#~ "Si existe un fichero llamado debian/paquete.menu-method, se instala en "
+#~ "etc/menu-methods/paquete en el directorio de construcción del paquete. "
+#~ "Este es un fichero de método de menú de Debian."
+
+# type: textblock
+#~ msgid ""
+#~ "If files named debian/package.mime or debian/package.sharedmimeinfo "
+#~ "exist, then they are installed into usr/lib/mime/packages/package and /"
+#~ "usr/share/mime/packages/package.xml (respectively) in the package build "
+#~ "directory."
+#~ msgstr ""
+#~ "Si existen ficheros llamados debian/paquete.mime o debian/paquete."
+#~ "sharedmimeinfo, se instalan en usr/lib/mime/packages/paquete y /usr/share/"
+#~ "mime/packages/package.xml (respectivamente) en el directorio de "
+#~ "construcción del paquete."
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "Files named debian/package.modprobe will be installed in etc/modprobe.d/"
+#~ "package.conf in the package build directory, to be used by module-init-"
+#~ "tools's version of modprobe."
+#~ msgstr ""
+#~ "Los ficheros llamados debian/paquete.modules se instalarán como etc/"
+#~ "modutils/paquete en el directorio de construcción del paquete. Modutils "
+#~ "usa estos ficheros. Los ficheros llamados debian/paquete.modprobe se "
+#~ "instalarán como etc/modprobe/paquete en el directorio de construcción del "
+#~ "paquete, y los usará la versión module-init-tools de modprobe."
+
+# type: textblock
+#~ msgid ""
+#~ "If a file named debian/package.ppp.ip-up exists, then it is installed "
+#~ "into etc/ppp/ip-up.d/package in the package build directory. Files named "
+#~ "debian/package.ppp.ip-down are installed to etc/ppp/ip-down.d/package"
+#~ msgstr ""
+#~ "Si existe un fichero llamado debian/package.ppp.ip-up, se instala en etc/"
+#~ "ppp/ip-up.d/paquete en el directorio de construcción del paquete. Los "
+#~ "ficheros debian/package.ppp.ip-down se instalan en etc/ppp/ip-down.d/"
+#~ "paquete."
+
+# type: textblock
+#~ msgid ""
+#~ "Any window manager programs specified as parameters will be registered in "
+#~ "the first package dh_installwm is told to act on. By default, this is the "
+#~ "first binary package in debian/control, but if you use -p, -i, or -a "
+#~ "flags, it will be the first package specified by those flags."
+#~ msgstr ""
+#~ "Cualquier gestor de ventanas especificado como parámetro se registrará en "
+#~ "el primer paquete sobre el que actúe dh_installwm. Por omisión, es el "
+#~ "primer paquete binario en debian/control, pero si usa las opciones -p, -"
+#~ "i, o -a, será el primer paquete especificado por estas opciones."
+
+# type: textblock
+#~ msgid ""
+#~ "The commands used to run the window manager or window managers you want "
+#~ "to register."
+#~ msgstr ""
+#~ "Las órdenes usadas para ejecutar el gestor o gestores de ventanas que "
+#~ "quiere registrar."
+
+# type: textblock
+#~ msgid ""
+#~ "The list can be specified in two ways. A file named debian/package.links "
+#~ "can list pairs of files. If you use this file, you should put each pair "
+#~ "of files on its own line, and separate the files within the pair with "
+#~ "whitespace. Also, pairs of files can be specified as parameters - these "
+#~ "pairs will only be created in the package build directory of the first "
+#~ "package dh_link is told to act on. By default, this is the first binary "
+#~ "package in debian/control, but if you use -p, -i, or -a flags, it will be "
+#~ "the first package specified by those flags."
+#~ msgstr ""
+#~ "Se puede especificar la lista de dos maneras. Un fichero llamado debian/"
+#~ "package.links puede listar los pares de ficheros. Si usted usa este "
+#~ "fichero, debe poner cada par de ficheros en su propia línea, y separar el "
+#~ "par de ficheros con un espacio en blanco. Además, los pares de ficheros "
+#~ "pueden ser especificados como parámetros - estos pares serán creados "
+#~ "solamente en el directorio de construcción del primer paquete en el que "
+#~ "dh_link es ejecutado. Por omisión éste es el primer paquete binario en "
+#~ "debian/control, pero si usted usa los parámetros -p, -i, o -a, será el "
+#~ "primer paquete especificado en estos parámetros."
+
+# type: textblock
+#, fuzzy
+#~ msgid "Act on all architecture dependent packages."
+#~ msgstr "Actuar en todos los paquetes independientes de la arquitectura."
+
+# type: textblock
+#~ msgid ""
+#~ "This is a smarter version of the -a flag, that is used in some rare "
+#~ "circumstances. It understands that if the control file lists "
+#~ "\"Architecture: i386\" for the package, the package should not be acted "
+#~ "on on other architectures. So this flag makes the command act on all "
+#~ "\"Architecture: any\" packages, as well as on any packages that have the "
+#~ "current architecture explicitly specified. Contrast to the -a flag, "
+#~ "which makes the command work on all packages that are not architecture "
+#~ "independent."
+#~ msgstr ""
+#~ "Esta es una opción refinada de la opción -a, que se usa en raras "
+#~ "circunstancias. Si el fichero de control tiene una línea para el paquete "
+#~ "como \"Architecture: i386\", entonces debhelper no actuará sobre el "
+#~ "paquete en otras arquitecturas. Así pues, esta opción hace que la orden "
+#~ "actúe en todos los paquetes \"Architecture: any\" así como en cualquier "
+#~ "paquete que tenga la arquitectura actual definida explícitamente. Esto es "
+#~ "distinto a la opción -a, que hace que la orden actúe en todos los "
+#~ "paquetes que son dependientes de la arquitectura."
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "Makes all files to be installed be found under dir. If this is specified, "
+#~ "it is akin to all the filenames having \"dir/\" prepended to them."
+#~ msgstr ""
+#~ "Hace que todos los ficheros fuente se encuentren bajo dir. Si se "
+#~ "especifica, es parecido a anteponer \"dir/\" a todos los nombres de los "
+#~ "ficheros fuente."
+
+# type: textblock
+#~ msgid ""
+#~ "To make dh_install behave like the old dh_movefiles, move your package."
+#~ "files file to package.install and call dh_install with \"--"
+#~ "sourcedir=debian/tmp\" appended to the command. This will approximate "
+#~ "dh_movefiles behaviour, except it will copy files instead of moving them."
+#~ msgstr ""
+#~ "Para que dh_install se comporte similar al viejo dh_movefiles, mueva su "
+#~ "fichero paquete.files a paquete.install y llame a dh_install con \"--"
+#~ "sourcedir=debian/tmp\" añadido a la orden. Esto aproximará el "
+#~ "comportamiento de dh_movefiles, excepto en que copiará los ficheros en "
+#~ "vez de moverlos."
+
+# type: textblock
+#~ msgid ""
+#~ "dh_installinfo is a debhelper program that is responsible for installing "
+#~ "info files and registering the files it installs with install-info."
+#~ msgstr ""
+#~ "dh_installinfo es un programa de debhelper responsable de instalar los "
+#~ "ficheros info y de registrar los ficheros que instala con install-info."
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "Note that install-info determines some information about the info files "
+#~ "by parsing them, in particular, it looks at the INFO-DIR-SECTION line to "
+#~ "determine what section the info file belongs in."
+#~ msgstr ""
+#~ "Determina alguna información de los ficheros info analizándolos, en "
+#~ "particular, busca la línea INFO-DIR-SECTION para determina a que sección "
+#~ "pertenece el fichero info."
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "dh_installinfo will automatically generate the postinst and prerm "
+#~ "commands needed to interface with install-info, updating the info dir. "
+#~ "These commands are inserted into the maintainer scripts by "
+#~ "dh_installdeb. See L<dh_installdeb(1)> for an explanation of how this "
+#~ "works."
+#~ msgstr ""
+#~ "dh_installinfo generará automáticamente las órdenes de postinst y prerm "
+#~ "necesarios para interaccionar con install-info, actualizando el info . "
+#~ "Lea L<dh_installdeb(1)> para una explicación acerca de como funciona esto."
+
+# type: textblock
+#~ msgid "dh_scrollkeeper - generate ScrollKeeper registration scripts"
+#~ msgstr "dh_scrollkeeper - genera programas de registro de ScrollKeeper"
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "This command automatically adds maintainer script snippets for "
+#~ "registering and unregistering files with ScrollKeeper (unless B<-n> is "
+#~ "used). These snippets are inserted into the maintainer scripts by "
+#~ "dh_installdeb. See L<dh_installdeb(1)> for an explanation of Debhelper "
+#~ "maintainer script snippets."
+#~ msgstr ""
+#~ "Esta orden añade automáticamente partes del programa de desarrollador "
+#~ "para registro y de-registro de ficheros con ScrollKeeper (a menos que se "
+#~ "use la opción B<-n>). Vea L<dh_installdeb(1)> para explicación sobre las "
+#~ "partes del programa Debhelper de desarrollador."
+
+# type: textblock
+#~ msgid ""
+#~ "It will also change any DTD declarations in the OMF and DocBook files to "
+#~ "refer to local files instead of remote URLs. This change does not modify "
+#~ "the source files, but the files in the package build tree."
+#~ msgstr ""
+#~ "También cambiará cualquier declaración DTD en los ficheros OMF y DocBook "
+#~ "que se refieran a ficheros locales en lugar de URLs remotas. Este cambio "
+#~ "no modifica los ficheros de origen, a excepción de los ficheros en el "
+#~ "árbol de construcción del paquete."
+
+# type: textblock
+#~ msgid "Do not modify F<postinst>/F<postrm> scripts."
+#~ msgstr "No modifica programas F<postinst>/F<postrm>."
+
+# type: textblock
+#~ msgid "dh_desktop - Register .desktop files"
+#~ msgstr "dh_desktop - Registra ficheros .desktop"
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "If a file named debian/package.menu-method exits, then it is installed "
+#~ "into etc/menu-methods/package in the package build directory. This is a "
+#~ "debian menu method file. In this case, dh_installmenu also automatically "
+#~ "generates the postinst and postrm commands needed to interface with the "
+#~ "debian menu package. These commands are inserted into the maintainer "
+#~ "scripts by dh_installdeb. See L<dh_installdeb(1)> for an explanation of "
+#~ "how this works."
+#~ msgstr ""
+#~ "Además genera automáticamente las ordenes de postinst y postrm necesarias "
+#~ "para interaccionar con el paquete menu de Debian. Lea L<dh_installdeb(1)> "
+#~ "para una explicación acerca de como funciona esto."
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "Do not delete debian/files, or files listed in debian/clean. When do you "
+#~ "want to use this? Anytime you have a debian/rules that has 2 binary "
+#~ "targets that build different .deb packages; for example, one target is "
+#~ "binary-arch, and the other is binary-indep, or one target builds the "
+#~ "shared library, and the other the -dev package. If you didn't use -k in "
+#~ "these cases, then debian/files would be deleted in the middle, and your "
+#~ "changes file will only contain the last binary package that was built."
+#~ msgstr ""
+#~ "No elimina debian/files. ¿Cuándo usaría esta opción? Cuando un debian/"
+#~ "rules tenga dos objetivos binarios que construyen paquetes .deb "
+#~ "diferentes; por ejemplo, un objetivo es binary-arch, y el otro es binary-"
+#~ "indep, o un objetivo construye una biblioteca compartida, y el otro un "
+#~ "paquete -dev. Si en estos casos no usa -k, se eliminará debian/files en "
+#~ "el medio, y los cambios sólo contendrán los del último paquete binario "
+#~ "construido."
+
+# type: textblock
+#~ msgid ""
+#~ "Note that this command is not idempotent. \"dh_clean B<-k>\" should be "
+#~ "called between invocations of this command. Otherwise, it may cause "
+#~ "multiple instances of the same text to be added to maintainer scripts."
+#~ msgstr ""
+#~ "Esta orden no es idempotente. Debe llamarse a \"dh_clean -k\" entre "
+#~ "invocaciones de esta orden. De otro modo, puede causar que los scripts de "
+#~ "mantenimiento contengan partes duplicadas."
+
+# type: textblock
+#~ msgid ""
+#~ "See F</usr/share/doc/debhelper/examples/rules.multi> for an example of "
+#~ "how to use this in a package that generates multiple binary packages."
+#~ msgstr ""
+#~ "Consulte F</usr/share/doc/debhelper/examples/rules.multi> para ver un "
+#~ "ejemplo de como usar esto en un paquete que genera múltiples paquetes "
+#~ "binarios."
+
+# type: textblock
+#, fuzzy
+#~ msgid ""
+#~ "This mode is still under development. Currently it has these differences "
+#~ "compared to V5:"
+#~ msgstr ""
+#~ "Esté modo todavía está en desarrollo. Los cambios respecto a V4 son:"
+
+# type: textblock
+#~ msgid ""
+#~ "Note that the directory given should be the complete or relative path to "
+#~ "a directory that contains the library. See example below."
+#~ msgstr ""
+#~ "Nótese que el directorio especificado deberá ser la ruta completa o "
+#~ "relativa a un directorio que contiene la biblioteca. Vea un ejemplo abajo."
+
+# type: textblock
+#~ msgid ""
+#~ "Use the shlibs file automatically generated by dh_makeshlibs for the "
+#~ "named package as a kind of automatically generated shlibs.local file. You "
+#~ "can use this switch in concert with the -l switch to make dpkg-shlibdeps "
+#~ "find a library built as part of the current package, and get the shlibs "
+#~ "information. See example below."
+#~ msgstr ""
+#~ "Usa el fichero shlibs generado automáticamente por dh_makeshlibs para el "
+#~ "paquete nombrado como un tipo de fichero shlibs.local generado "
+#~ "automáticamente. Usted puede usar este modificador en conjunto con el "
+#~ "modificador -l para hacer que dpkg-shlibdeps encuentre una biblioteca "
+#~ "construida como parte del paquete actual, y obtenga la información de "
+#~ "shlibs. Vea un ejemplo abajo."
+
+# type: textblock
+#~ msgid ""
+#~ "Be sure to only use directory names relative to the package build "
+#~ "directory. Ie, \"/usr/bin\" should not be used, use \"usr/bin\" instead."
+#~ msgstr ""
+#~ "Asegúrese de sólo usar nombres de directorios relativos al directorio de "
+#~ "construcción del paquete. Por ejemplo, no debe usarse \"/usr/bin\", pero "
+#~ "si \"usr/bin\"."
+