+debhelper (7.4.11) UNRELEASED; urgency=low
+
+ * dh(1): Minor rewording of documentation of override commands.
+ Closes: #560421
+ * dh(1): Add an example of using an override target to avoid
+ dh running several commands. Closes: #560600
+
+ -- Joey Hess <joeyh@debian.org> Mon, 14 Dec 2009 19:23:25 -0500
+
+debhelper (7.4.10) unstable; urgency=low
+
+ * Add --parallel option that can be used to enable parallel building
+ without limiting the max number of parallel jobs. (Modestas Vainius)
+ * dh_makeshlibs: Temporarily revert fix for #557603, as it caused
+ dpkg-gensymbols to see libraries not in the regular search path and
+ broke builds. This will be re-enabled in v8. Closes: #560217
+
+ -- Joey Hess <joeyh@debian.org> Wed, 09 Dec 2009 15:17:19 -0500
+
+debhelper (7.4.9) unstable; urgency=low
+
+ * Typo. Closes: #558654
+ * dh_installinit: Fix installation of defaults file when an upstart job is
+ installed. Closes: #558782
+
+ -- Joey Hess <joeyh@debian.org> Mon, 30 Nov 2009 14:21:10 -0500
+
+debhelper (7.4.8) unstable; urgency=low
+
+ * Parallel building support is no longer enabled by default. It can still
+ be enabled by using the --max-parallel option. This was necessary because
+ some buildds build with -j2 by default. (See #532805)
+ * dh: Document --no-act. Closes: #557505
+ * dh_makeshlibs: Make -X also exclude libraries from the symbols file.
+ Closes: #557603 (Peter Samuelson)
+
+ -- Joey Hess <joeyh@debian.org> Mon, 23 Nov 2009 13:57:10 -0500
+
+debhelper (7.4.7) unstable; urgency=low
+
+ * make: Avoid infinite make recursion that occurrs when testing existence
+ of a target in a certian horribly broken makefile, by making the test stop
+ after it sees one line of output from make. (This may be better replaced
+ with dh's makefile parser in the future.) Closes: #557307
+
+ -- Joey Hess <joeyh@debian.org> Sat, 21 Nov 2009 13:35:22 -0500
+
+debhelper (7.4.6) unstable; urgency=low
+
+ * Update --list to reflect buildsystem autoselection changes.
+ * Remove last vestiages of support for /usr/X11R6.
+ * cmake: Fix deep recursion in test. Closes: #557299
+
+ -- Joey Hess <joeyh@debian.org> Sat, 21 Nov 2009 13:08:48 -0500
+
+debhelper (7.4.5) unstable; urgency=low
+
+ * ant: Fix auto-selection breakage. Closes: #557006 (Cyril Brulebois)
+
+ -- Joey Hess <joeyh@debian.org> Thu, 19 Nov 2009 11:53:39 -0500
+
+debhelper (7.4.4) unstable; urgency=low
+
+ * The makefile buildsystem (and derived buildsystems cmake, autoconf, etc)
+ now supports parallel building by default, as specified via
+ DEB_BUILD_OPTIONS. Closes: #532805
+ * dh_auto_*: Add --max-parallel option that can be used to control
+ or disable parallel building. --max-parallel=1 will disable parallel
+ building, while --max-parallel=N will limit the maximum number of
+ parallel processes that can be specified via DEB_BUILD_OPTIONS.
+ * Added some hacks to avoid warnings about unavailable jobservers when
+ debhelper runs make, and the parent debian/rules was run in parallel
+ mode (as dpkg-buildpackage -j currently does).
+ * Thanks, Modestas Vainius for much of the work on parallel build support.
+ * Add deprecation warnings for -u to the documentation, since putting
+ options after -- is much more sane. (However, -u will not go away any
+ time soon.) Closes: #554509
+ * Separate deprecated programs in the list of commands in debhelper(7).
+ Closes: #548382
+ * Adjust code to add deprecation warning for compatibility level 4.
+ (Man page already said it was deprecated.) Closes: #555899
+ * dh_installdocs: Warn if a doc-base file cannot be parsed to find a
+ document id. Closes: #555677
+ * Typo. Closes: #555659
+ * cmake: Set CTEST_OUTPUT_ON_FAILURE when running test suite.
+ Closes: #555807 (Modestas Vainius)
+ * autoconf: If configure fails, display config.log. Intended to make
+ it easier to debug configure script failures on autobuilders.
+ Closes: #556384
+ * Improve build system autoselection process; this allows cmake to be
+ autoselected for steps after configure, instead of falling back to
+ makefile once cmake generated a makefile. Closes: #555805
+ (Modestas Vainius)
+
+ -- Joey Hess <joeyh@debian.org> Wed, 18 Nov 2009 14:44:21 -0500
+
+debhelper (7.4.3) unstable; urgency=low
+
+ [ Valery Perrin ]
+ * update french translation. Closes: #494300, #477703
+ * add --previous at po4a command into Makefile
+ * add dh, dh_auto_install, dh_auto_clean, dh_auto_configure,
+ dh_auto_install, dh_auto_test, dh_bugfiles, dh_icons, dh_installifupdown,
+ dh_installudev, dh_lintian, dh_prep into po4a.cfg manpages list
+ * fix a spelling mistake in dh_makeshlibs man french
+ translation (#494300 part 2)
+
+ [ Joey Hess ]
+ * dh_perl: Do not look at perl scripts under /usr/share/doc.
+ Closes: #546683
+ * Allow dpkg-architecture to print errors to stderr. Closes: #548636
+ * python_distutils: Run default python last, not first, and pass --force
+ to setup.py install to ensure that timestamps do not prevent installation
+ of the scripts built for the default python, with unversioned shebang
+ lines. Closes: #547510 (Thanks, Andrew Straw)
+
+ -- Joey Hess <joeyh@debian.org> Thu, 01 Oct 2009 14:37:38 -0400
+
+debhelper (7.4.2) unstable; urgency=low
+
+ * Man page typo. Closes: #545443
+ * dh: Remove duplicate dh_installcatalogs list. Closes: #545483
+ (It was only run once due to logging.)
+ * dh_installdocs: Add --link-doc option that can be used to link
+ documentation directories. This is easier to use and more flexible
+ than the old method of running dh_link first to make a broken symlink.
+ Closes: #545676 Thanks, Colin Watson
+ * Reorder dh_pysupport call in dh sequence to come before
+ dh_installinit, so the generated postinst script registers
+ python modules before trying to use them. Closes: #546293
+ * dh_installudev: With --name, install debian/<package>.<name>.udev
+ to rules.d/<priority>-<name>, the same as debian/<name>.udev
+ is installed for the first package. Closes: #546337
+
+ -- Joey Hess <joeyh@debian.org> Mon, 14 Sep 2009 15:46:49 -0400
+
+debhelper (7.4.1) unstable; urgency=low
+
+ [ Steve Langasek ]
+ * dh_installinit: Support upstart job files, and provide compatibility
+ symlinks in /etc/init.d for sysv-rc implementations. Closes: #536035.
+
+ [ Joey Hess ]
+ * Add FILES sections to man pages. Closes: #545041
+ * dh_prep(1): Clarify when it should be called. Closes: #544969
+
+ -- Joey Hess <joeyh@debian.org> Sun, 06 Sep 2009 18:44:40 -0400
+
+debhelper (7.4.0) unstable; urgency=low
+
+ * Optimise -s handling to avoid running dpkg-architecture if a package
+ is arch all. This was, suprisingly, the only overhead of using the -s
+ flag with arch all/any packages.
+ * The -a flag now does the same thing as the -s flag, so debhelper users
+ do not need to worry about using the -s flag when building a package
+ that only builds for some architectures, and dh will also work in that
+ situation. Closes: #540794
+
+ -- Joey Hess <joeyh@debian.org> Tue, 01 Sep 2009 13:41:16 -0400
+
+debhelper (7.3.16) unstable; urgency=low
+
+ * dh_desktop: Clarify in man page why it's a no-op.
+ Closes: #543364
+ * dh_installdocs: Loosen the Document field parsing, to accept
+ everything doc-base *really* accepts in a doc id (not just what
+ it's documented to accept). Closes: #543499
+ * Allow sequence addons to pass options to debhelper commands,
+ by adding add_command_options and remove_command_options to the interface.
+ Closes: #543392
+ (Modestas Vainius)
+ * dh_auto_install: Add a --destdir parameter that can be used to override
+ the default. Closes: #538201
+ (Modestas Vainius)
+
+ -- Joey Hess <joeyh@debian.org> Wed, 26 Aug 2009 17:10:53 -0400
+
+debhelper (7.3.15) unstable; urgency=low
+
+ * dh_installudev: Install rules files into new location
+ /lib/udev/rules.d/
+ * dh_installudev: Add code to delete old conffiles unless
+ they're modified, and in that case, rename them to override
+ the corresponding file in /lib/udev. (Based on patch by
+ Martin Pitt.) (Note that this file will not be deleted on purge --
+ I can't see a good way to determine when it's appropriate to do
+ that.)
+ * dh_installudev: Set default priority to 60; dropping the "z".
+ If --priority=zNN is passed, treat that as priority NN.
+ * Above Closes: #491117
+ * dh_installudev: Drop code handling move of /etc/udev/foo into
+ /etc/udev/rules.d/.
+
+ -- Joey Hess <joeyh@debian.org> Fri, 21 Aug 2009 17:22:08 -0400
+
+debhelper (7.3.14) unstable; urgency=low
+
+ [ Colin Watson ]
+ * dh: Add --list option to list available addons. Closes: #541302
+
+ [ Joey Hess ]
+ * Run pod2man with --utf8. Closes: #541270
+ * dh: Display $@ error if addon load fails. Closes: #541845
+ * dh_perl: Remove perl minimum dependency per new policy. Closes: #541811
+
+ -- Joey Hess <joeyh@debian.org> Mon, 17 Aug 2009 15:55:48 -0400
+