msgstr ""
"Project-Id-Version: debhelper 8.9.3\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-12-09 13:54-0400\n"
+"POT-Creation-Date: 2012-03-11 18:29-0400\n"
"PO-Revision-Date: 2011-08-01 19:58+0200\n"
"Last-Translator: Omar Campagne <ocampagne@gmail.com>\n"
"Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
# type: =item
#. type: =item
-#: debhelper.pod:106 dh:64
+#: debhelper.pod:106 dh:66
msgid "B<--no-act>"
msgstr "B<--no-act>"
# type: =item
#. type: =item
-#: debhelper.pod:251 dh:60
+#: debhelper.pod:251 dh:62
msgid "B<--list>, B<-l>"
msgstr "B<--list>, B<-l>"
# type: textblock
#. type: textblock
#: debhelper.pod:269
+#, fuzzy
+#| msgid ""
+#| "Tell debhelper what compatibility level to use by writing a number to "
+#| "F<debian/compat>. For example, to turn on v8 mode:"
msgid ""
"Tell debhelper what compatibility level to use by writing a number to "
-"F<debian/compat>. For example, to turn on v8 mode:"
+"F<debian/compat>. For example, to turn on v9 mode:"
msgstr ""
"Para especificar a debhelper qué nivel de compatibilidad usar, debe escribir "
"un número en f<debian/compat>. Por ejemplo, para activar el modo v8:"
# type: verbatim
#. type: verbatim
#: debhelper.pod:272
-#, no-wrap
+#, fuzzy, no-wrap
+#| msgid ""
+#| " % echo 8 > debian/compat\n"
+#| "\n"
msgid ""
-" % echo 8 > debian/compat\n"
+" % echo 9 > debian/compat\n"
"\n"
msgstr ""
" % echo 8 > debian/compat\n"
# type: textblock
#. type: textblock
#: debhelper.pod:274
+#, fuzzy
+#| msgid ""
+#| "Once your package uses debhelper to build, be sure to add debhelper to "
+#| "your Build-Depends line in F<debian/control>. You should build-depend on "
+#| "a version of debhelper equal to (or greater than) the debhelper "
+#| "compatibility level your package uses. So if your package used "
+#| "compatibility level 7:"
+msgid ""
+"Your package will also need a versioned build dependency on a version of "
+"debhelper equal to (or greater than) the compatibility level your package "
+"uses. So for compatibility level 9, ensure debian/control has:"
+msgstr ""
+"Una vez que su paquete usa debhelper para construirse, asegúrese de añadir "
+"debhelper a sus dependencias de construcción en F<debian/control>. Debería "
+"usar como dependencia de construcción («build-depend») una versión de "
+"debhelper igual o mayor que el nivel de compatibilidad de debhelper que use "
+"su paquete. Por ejemplo, si su paquete usa el nivel de compatibilidad 7:"
+
+# type: verbatim
+#. type: verbatim
+#: debhelper.pod:278
+#, fuzzy, no-wrap
+#| msgid ""
+#| " Build-Depends: debhelper (>= 7)\n"
+#| "\n"
+msgid ""
+" Build-Depends: debhelper (>= 9)\n"
+"\n"
+msgstr ""
+" Build-Depends: debhelper (>= 7)\n"
+"\n"
+
+# type: textblock
+#. type: textblock
+#: debhelper.pod:280
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
# type: textblock
#. type: textblock
-#: debhelper.pod:281
+#: debhelper.pod:287
msgid "These are the available compatibility levels:"
msgstr "Los niveles de compatibilidad disponibles son:"
#. type: =item
-#: debhelper.pod:285
+#: debhelper.pod:291
msgid "v1"
msgstr "v1"
# type: textblock
#. type: textblock
-#: debhelper.pod:287
+#: debhelper.pod:293
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use F<debian/tmp> as the package tree "
# type: textblock
#. type: textblock
-#: debhelper.pod:292 debhelper.pod:299 debhelper.pod:322 debhelper.pod:351
+#: debhelper.pod:298 debhelper.pod:305 debhelper.pod:328 debhelper.pod:357
msgid "This mode is deprecated."
msgstr "Este modo está obsoleto."
#. type: =item
-#: debhelper.pod:294
+#: debhelper.pod:300
msgid "v2"
msgstr "v2"
# type: textblock
#. type: textblock
-#: debhelper.pod:296
+#: debhelper.pod:302
msgid ""
"In this mode, debhelper will consistently use debian/I<package> as the "
"package tree directory for every package that is built."
"el árbol de directorios para cada paquete que se construya."
#. type: =item
-#: debhelper.pod:301
+#: debhelper.pod:307
msgid "v3"
msgstr "v3"
# type: textblock
#. type: textblock
-#: debhelper.pod:303
+#: debhelper.pod:309
msgid "This mode works like v2, with the following additions:"
msgstr "Este modo funciona como v2, con los siguientes añadidos:"
# type: =item
#. type: =item
-#: debhelper.pod:307 debhelper.pod:312 debhelper.pod:316 debhelper.pod:330
-#: debhelper.pod:335 debhelper.pod:340 debhelper.pod:345 debhelper.pod:359
-#: debhelper.pod:363 debhelper.pod:368 debhelper.pod:372 debhelper.pod:384
-#: debhelper.pod:389 debhelper.pod:395 debhelper.pod:401 debhelper.pod:414
-#: debhelper.pod:421 debhelper.pod:425 debhelper.pod:429 debhelper.pod:444
-#: debhelper.pod:448 debhelper.pod:456 debhelper.pod:461 debhelper.pod:475
-#: debhelper.pod:480 debhelper.pod:487 debhelper.pod:492 debhelper.pod:497
-#: debhelper.pod:501 debhelper.pod:507 debhelper.pod:512 debhelper.pod:517
+#: debhelper.pod:313 debhelper.pod:318 debhelper.pod:322 debhelper.pod:336
+#: debhelper.pod:341 debhelper.pod:346 debhelper.pod:351 debhelper.pod:365
+#: debhelper.pod:369 debhelper.pod:374 debhelper.pod:378 debhelper.pod:390
+#: debhelper.pod:395 debhelper.pod:401 debhelper.pod:407 debhelper.pod:420
+#: debhelper.pod:427 debhelper.pod:431 debhelper.pod:435 debhelper.pod:448
+#: debhelper.pod:452 debhelper.pod:460 debhelper.pod:465 debhelper.pod:479
+#: debhelper.pod:484 debhelper.pod:491 debhelper.pod:496 debhelper.pod:501
+#: debhelper.pod:505 debhelper.pod:511 debhelper.pod:516 debhelper.pod:521
+#: debhelper.pod:536
msgid "-"
msgstr "-"
# type: textblock
#. type: textblock
-#: debhelper.pod:309
+#: debhelper.pod:315
msgid ""
"Debhelper config files support globbing via B<*> and B<?>, when appropriate. "
"To turn this off and use those characters raw, just prefix with a backslash."
# type: textblock
#. type: textblock
-#: debhelper.pod:314
+#: debhelper.pod:320
msgid ""
"B<dh_makeshlibs> makes the F<postinst> and F<postrm> scripts call "
"B<ldconfig>."
# type: textblock
#. type: textblock
-#: debhelper.pod:318
+#: debhelper.pod:324
msgid ""
"Every file in F<etc/> is automatically flagged as a conffile by "
"B<dh_installdeb>."
"conffiles."
#. type: =item
-#: debhelper.pod:324
+#: debhelper.pod:330
msgid "v4"
msgstr "v4"
#. type: textblock
-#: debhelper.pod:326
+#: debhelper.pod:332
msgid "Changes from v3 are:"
msgstr "Los cambios desde el nivel v3 son:"
# type: textblock
#. type: textblock
-#: debhelper.pod:332
+#: debhelper.pod:338
msgid ""
"B<dh_makeshlibs -V> will not include the Debian part of the version number "
"in the generated dependency line in the shlibs file."
# type: textblock
#. type: textblock
-#: debhelper.pod:337
+#: debhelper.pod:343
msgid ""
"You are encouraged to put the new B<${misc:Depends}> into F<debian/control> "
"to supplement the B<${shlibs:Depends}> field."
# type: textblock
#. type: textblock
-#: debhelper.pod:342
+#: debhelper.pod:348
msgid ""
"B<dh_fixperms> will make all files in F<bin/> directories and in F<etc/init."
"d> executable."
# type: textblock
#. type: textblock
-#: debhelper.pod:347
+#: debhelper.pod:353
msgid "B<dh_link> will correct existing links to conform with policy."
msgstr ""
"B<dh_link> corregirá los enlaces existentes para ajustarse a las normas de "
"Debian."
#. type: =item
-#: debhelper.pod:353
+#: debhelper.pod:359
msgid "v5"
msgstr "v5"
#. type: textblock
-#: debhelper.pod:355
+#: debhelper.pod:361
msgid "Changes from v4 are:"
msgstr "Los cambios desde el nivel v4 son:"
# type: textblock
#. type: textblock
-#: debhelper.pod:361
+#: debhelper.pod:367
msgid "Comments are ignored in debhelper config files."
msgstr ""
"Se ignoran los comentarios en los ficheros de configuración de debhelper."
# type: textblock
#. type: textblock
-#: debhelper.pod:365
+#: debhelper.pod:371
msgid ""
"B<dh_strip --dbg-package> now specifies the name of a package to put "
"debugging symbols in, not the packages to take the symbols from."
# type: textblock
#. type: textblock
-#: debhelper.pod:370
+#: debhelper.pod:376
msgid "B<dh_installdocs> skips installing empty files."
msgstr "B<dh_installdocs> omite la instalación de ficheros vacíos."
# type: textblock
#. type: textblock
-#: debhelper.pod:374
+#: debhelper.pod:380
msgid "B<dh_install> errors out if wildcards expand to nothing."
msgstr ""
"B<dh_install> devuelve un error si los comodines se expanden a un valor "
"vacío."
#. type: =item
-#: debhelper.pod:378
+#: debhelper.pod:384
msgid "v6"
msgstr "v6"
#. type: textblock
-#: debhelper.pod:380
+#: debhelper.pod:386
msgid "Changes from v5 are:"
msgstr "Los cambios desde el nivel v5 son:"
# type: textblock
#. type: textblock
-#: debhelper.pod:386
+#: debhelper.pod:392
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the F<prerm> and F<postrm> scripts."
# type: textblock
#. type: textblock
-#: debhelper.pod:391
+#: debhelper.pod:397
msgid ""
"B<dh_installwm> will install a slave manpage link for F<x-window-manager.1."
"gz>, if it sees the man page in F<usr/share/man/man1> in the package build "
# type: textblock
#. type: textblock
-#: debhelper.pod:397
+#: debhelper.pod:403
msgid ""
"B<dh_builddeb> did not previously delete everything matching "
"B<DH_ALWAYS_EXCLUDE>, if it was set to a list of things to exclude, such as "
# type: textblock
#. type: textblock
-#: debhelper.pod:403
+#: debhelper.pod:409
msgid ""
"B<dh_installman> allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
"anteriores simplemente rechazaba hacerlo, de forma silenciosa."
#. type: =item
-#: debhelper.pod:408
+#: debhelper.pod:414
msgid "v7"
msgstr "v7"
#. type: textblock
-#: debhelper.pod:410
+#: debhelper.pod:416
msgid "Changes from v6 are:"
msgstr "Los cambios desde el nivel v6 son:"
# type: textblock
#. type: textblock
-#: debhelper.pod:416
+#: debhelper.pod:422
msgid ""
"B<dh_install>, will fall back to looking for files in F<debian/tmp> if it "
"doesn't find them in the current directory (or wherever you tell it look "
# type: textblock
#. type: textblock
-#: debhelper.pod:423
+#: debhelper.pod:429
msgid "B<dh_clean> will read F<debian/clean> and delete files listed there."
msgstr ""
"B<dh_clean> leerá F<debian/clean> y eliminará los ficheros ahí listados."
# type: textblock
#. type: textblock
-#: debhelper.pod:427
+#: debhelper.pod:433
msgid "B<dh_clean> will delete toplevel F<*-stamp> files."
msgstr "B<dh_clean> eliminará ficheros F<*-stamp> del nivel superior."
# type: textblock
#. type: textblock
-#: debhelper.pod:431
+#: debhelper.pod:437
msgid ""
"B<dh_installchangelogs> will guess at what file is the upstream changelog if "
"none is specified."
"cambios de la fuente original si no se especifica ninguno."
#. type: =item
-#: debhelper.pod:436
+#: debhelper.pod:442
msgid "v8"
msgstr "v8"
-# type: textblock
-#. type: textblock
-#: debhelper.pod:438
-msgid "This is the recommended mode of operation."
-msgstr "Este es el modo de operación aconsejado."
-
#. type: textblock
-#: debhelper.pod:440
+#: debhelper.pod:444
msgid "Changes from v7 are:"
msgstr "Los cambios desde el nivel v7 son:"
#. type: textblock
-#: debhelper.pod:446
+#: debhelper.pod:450
msgid ""
"Commands will fail rather than warning when they are passed unknown options."
msgstr ""
"opciones desconocidas."
#. type: textblock
-#: debhelper.pod:450
+#: debhelper.pod:454
msgid ""
"B<dh_makeshlibs> will run B<dpkg-gensymbols> on all shared libraries that it "
"generates shlibs files for. So B<-X> can be used to exclude libraries. "
"comportamiento que puede impedir la construcción de algunos paquetes."
#. type: textblock
-#: debhelper.pod:458
+#: debhelper.pod:462
msgid ""
"B<dh> requires the sequence to run be specified as the first parameter, and "
"any switches come after it. Ie, use \"B<dh $@ --foo>\", not \"B<dh --foo $@>"
"B<dh $@ --foo>, no B<dh --foo $@>."
#. type: textblock
-#: debhelper.pod:463
+#: debhelper.pod:467
msgid ""
"B<dh_auto_>I<*> prefer to use Perl's B<Module::Build> in preference to "
"F<Makefile.PL>."
"preferencia a un fichero F<Makefile.PL>."
#. type: =item
-#: debhelper.pod:467
+#: debhelper.pod:471
msgid "v9"
msgstr "v9"
+# type: textblock
#. type: textblock
-#: debhelper.pod:469
-msgid ""
-"This compatibility level is still open for development; use with caution."
-msgstr ""
-"Este nivel de compatibilidad aún está en desarrollo, utilícelo con "
-"precaución."
+#: debhelper.pod:473
+msgid "This is the recommended mode of operation."
+msgstr "Este es el modo de operación aconsejado."
#. type: textblock
-#: debhelper.pod:471
+#: debhelper.pod:475
msgid "Changes from v8 are:"
msgstr "Los cambios desde el nivel v8 son:"
#. type: textblock
-#: debhelper.pod:477
+#: debhelper.pod:481
msgid ""
"Multiarch support. In particular, B<dh_auto_configure> passes multiarch "
"directories to autoconf in --libdir and --libexecdir."
"multiarquitectura a autoconf en «--libdir» y «--libexecdir»."
#. type: textblock
-#: debhelper.pod:482
+#: debhelper.pod:486
msgid ""
"dh is aware of the usual dependencies between targets in debian/rules. So, "
"\"dh binary\" will run any build, build-arch, build-indep, install, etc "
msgstr ""
#. type: textblock
-#: debhelper.pod:489
+#: debhelper.pod:493
msgid ""
"B<dh_strip> compresses debugging symbol files to reduce the installed size "
"of -dbg packages."
msgstr ""
#. type: textblock
-#: debhelper.pod:494
+#: debhelper.pod:498
msgid ""
"B<dh_auto_configure> does not include the source package name in --"
"libexecdir when using autoconf."
"libexecdir» al utilizar autoconf."
#. type: textblock
-#: debhelper.pod:499
+#: debhelper.pod:503
msgid "B<dh> does not default to enabling --with=python-support"
msgstr "B<dh> no activa «--with=python-support» de forma predeterminada."
#. type: textblock
-#: debhelper.pod:503
+#: debhelper.pod:507
#, fuzzy
#| msgid ""
#| "All of the B<dh_auto_>I<*> debhelper programs set environment variables "
#| "DEB_BUILD_OPTIONS=noopt too."
msgid ""
"All of the B<dh_auto_>I<*> debhelper programs and B<dh> set environment "
-"variables listed by B<dpkg-buildflags>, unless they are already set. They "
-"support DEB_BUILD_OPTIONS=noopt too."
+"variables listed by B<dpkg-buildflags>, unless they are already set."
msgstr ""
"Todos los programas de debhelper B<dh_auto_>I<*> definen variables de "
"entorno listados por B<dpkg-buildflags>, a menos que ya estén definidos. "
"También admiten «DEB_BUILD_OPTIONS=noopt»."
#. type: textblock
-#: debhelper.pod:509
+#: debhelper.pod:513
msgid ""
-"B<dh_auto_configure> passes CFLAGS to perl F<Makefile.PL> and F<Build.PL>"
+"B<dh_auto_configure> passes B<dpkg-buildflags> CFLAGS, CPPFLAGS, and LDFLAGS "
+"to perl F<Makefile.PL> and F<Build.PL>"
msgstr ""
#. type: textblock
-#: debhelper.pod:514
+#: debhelper.pod:518
msgid ""
"B<dh_strip> puts separated debug symbols in a location based on their build-"
"id."
msgstr ""
#. type: textblock
-#: debhelper.pod:519
+#: debhelper.pod:523
msgid ""
-"Executable debconf config files are run and their output used as the "
+"Executable debhelper config files are run and their output used as the "
"configuration."
msgstr ""
+#. type: =item
+#: debhelper.pod:528
+#, fuzzy
+#| msgid "v1"
+msgid "v10"
+msgstr "v1"
+
+#. type: textblock
+#: debhelper.pod:530
+msgid ""
+"This compatibility level is still open for development; use with caution."
+msgstr ""
+"Este nivel de compatibilidad aún está en desarrollo, utilícelo con "
+"precaución."
+
+#. type: textblock
+#: debhelper.pod:532
+#, fuzzy
+#| msgid "Changes from v3 are:"
+msgid "Changes from v9 are:"
+msgstr "Los cambios desde el nivel v3 son:"
+
+#. type: textblock
+#: debhelper.pod:538
+msgid "None yet.."
+msgstr ""
+
# type: =head1
#. type: =head1
-#: debhelper.pod:526 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116
+#: debhelper.pod:544 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116
#: dh_installemacsen:67 dh_installexamples:53 dh_installinit:133
#: dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55
#: dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68
# type: =head2
#. type: =head2
-#: debhelper.pod:528
+#: debhelper.pod:546
msgid "Multiple binary package support"
msgstr "Compatibilidad con varios paquetes binarios"
# type: textblock
#. type: textblock
-#: debhelper.pod:530
+#: debhelper.pod:548
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
# type: textblock
#. type: textblock
-#: debhelper.pod:538
+#: debhelper.pod:556
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
# type: =head2
#. type: =head2
-#: debhelper.pod:544
+#: debhelper.pod:562
msgid "Automatic generation of Debian install scripts"
msgstr "Generación automática de los scripts de instalación de Debian"
# type: textblock
#. type: textblock
-#: debhelper.pod:546
+#: debhelper.pod:564
msgid ""
"Some debhelper commands will automatically generate parts of Debian "
"maintainer scripts. If you want these automatically generated things "
# type: textblock
#. type: textblock
-#: debhelper.pod:553
+#: debhelper.pod:571
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
# type: textblock
#. type: textblock
-#: debhelper.pod:556
+#: debhelper.pod:574
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
# type: textblock
#. type: textblock
-#: debhelper.pod:559
+#: debhelper.pod:577
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a Perl script. If you would like to embed it into a Perl script, here "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:564
+#: debhelper.pod:582
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
# type: =head2
#. type: =head2
-#: debhelper.pod:570
+#: debhelper.pod:588
msgid "Automatic generation of miscellaneous dependencies."
msgstr "Generación automática de diversas dependencias."
#. type: textblock
-#: debhelper.pod:572
+#: debhelper.pod:590
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
# type: textblock
#. type: textblock
-#: debhelper.pod:580
+#: debhelper.pod:598
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called B<"
# type: textblock
#. type: textblock
-#: debhelper.pod:585
+#: debhelper.pod:603
msgid ""
"This is entirely independent of the standard B<${shlibs:Depends}> generated "
"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by L<dh_perl(1)"
# type: =head2
#. type: =head2
-#: debhelper.pod:590
+#: debhelper.pod:608
msgid "Package build directories"
msgstr "Directorios de construcción del paquete"
# type: textblock
#. type: textblock
-#: debhelper.pod:592
+#: debhelper.pod:610
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/I<package>."
# type: textblock
#. type: textblock
-#: debhelper.pod:595
+#: debhelper.pod:613
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the B<-P> flag. For example, \"B<dh_installdocs -Pdebian/tmp>"
# type: =head2
#. type: =head2
-#: debhelper.pod:603
+#: debhelper.pod:621
msgid "udebs"
msgstr "udebs"
# type: textblock
#. type: textblock
-#: debhelper.pod:605
+#: debhelper.pod:623
+#, fuzzy
+#| msgid ""
+#| "Debhelper includes support for udebs. To create a udeb with debhelper, "
+#| "add \"B<Package-Type: udeb>\" to the package's stanza in F<debian/"
+#| "control>, and build-depend on debhelper (>= 4.2). Debhelper will try to "
+#| "create udebs that comply with debian-installer policy, by making the "
+#| "generated package files end in F<.udeb>, not installing any documentation "
+#| "into a udeb, skipping over F<preinst>, F<postrm>, F<prerm>, and F<config> "
+#| "scripts, etc."
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
-"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>, and "
-"build-depend on debhelper (>= 4.2). Debhelper will try to create udebs that "
-"comply with debian-installer policy, by making the generated package files "
-"end in F<.udeb>, not installing any documentation into a udeb, skipping over "
-"F<preinst>, F<postrm>, F<prerm>, and F<config> scripts, etc."
+"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>. "
+"Debhelper will try to create udebs that comply with debian-installer policy, "
+"by making the generated package files end in F<.udeb>, not installing any "
+"documentation into a udeb, skipping over F<preinst>, F<postrm>, F<prerm>, "
+"and F<config> scripts, etc."
msgstr ""
"Debhelper incluye compatibilidad con paquetes udeb. Para crear un udeb con "
"debhelper, añada B<Package-Type: udeb> al párrafo del paquete binario en "
"no instalando ninguna documentación en un udeb, y omitiendo los scripts "
"F<preinst>, F<postrm>, F<prerm>, scripts F<config>, etc."
-#. type: =head2
-#: debhelper.pod:612
-msgid "Build depends"
-msgstr "Dependencias de construcción"
-
-# type: textblock
-#. type: textblock
-#: debhelper.pod:614
-msgid ""
-"Once your package uses debhelper to build, be sure to add debhelper to your "
-"Build-Depends line in F<debian/control>. You should build-depend on a "
-"version of debhelper equal to (or greater than) the debhelper compatibility "
-"level your package uses. So if your package used compatibility level 7:"
-msgstr ""
-"Una vez que su paquete usa debhelper para construirse, asegúrese de añadir "
-"debhelper a sus dependencias de construcción en F<debian/control>. Debería "
-"usar como dependencia de construcción («build-depend») una versión de "
-"debhelper igual o mayor que el nivel de compatibilidad de debhelper que use "
-"su paquete. Por ejemplo, si su paquete usa el nivel de compatibilidad 7:"
-
-# type: verbatim
-#. type: verbatim
-#: debhelper.pod:620
-#, no-wrap
-msgid ""
-" Build-Depends: debhelper (>= 7)\n"
-"\n"
-msgstr ""
-" Build-Depends: debhelper (>= 7)\n"
-"\n"
-
# type: =head1
#. type: =head1
-#: debhelper.pod:622
+#: debhelper.pod:630
msgid "ENVIRONMENT"
msgstr "ENTORNO"
# type: =item
#. type: =item
-#: debhelper.pod:626
+#: debhelper.pod:634
msgid "B<DH_VERBOSE>"
msgstr "B<DH_VERBOSE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:628
+#: debhelper.pod:636
msgid ""
"Set to B<1> to enable verbose mode. Debhelper will output every command it "
"runs that modifies files on the build system."
# type: =item
#. type: =item
-#: debhelper.pod:631
+#: debhelper.pod:639
msgid "B<DH_COMPAT>"
msgstr "B<DH_COMPAT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:633
+#: debhelper.pod:641
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in F<debian/compat>."
# type: =item
#. type: =item
-#: debhelper.pod:636
+#: debhelper.pod:644
msgid "B<DH_NO_ACT>"
msgstr "B<DH_NO_ACT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:638
+#: debhelper.pod:646
msgid "Set to B<1> to enable no-act mode."
msgstr "Defina como B<1> para habilitar el modo no-act."
# type: =item
#. type: =item
-#: debhelper.pod:640
+#: debhelper.pod:648
msgid "B<DH_OPTIONS>"
msgstr "B<DH_OPTIONS>"
# type: textblock
#. type: textblock
-#: debhelper.pod:642
+#: debhelper.pod:650
#, fuzzy
#| msgid ""
#| "Anything in this variable will be prepended to the command line arguments "
"a ciertas ordenes se ignorarán por las órdenes que no las acepten."
#. type: textblock
-#: debhelper.pod:645
+#: debhelper.pod:653
msgid ""
"When using L<dh(1)>, it can be passed options that will be passed on to each "
"debhelper command, which is generally better than using DH_OPTIONS."
# type: =item
#. type: =item
-#: debhelper.pod:648
+#: debhelper.pod:656
msgid "B<DH_ALWAYS_EXCLUDE>"
msgstr "B<DH_ALWAYS_EXCLUDE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:650
+#: debhelper.pod:658
msgid ""
"If set, this adds the value the variable is set to to the B<-X> options of "
"all commands that support the B<-X> option. Moreover, B<dh_builddeb> will "
# type: textblock
#. type: textblock
-#: debhelper.pod:654
+#: debhelper.pod:662
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories from "
# type: textblock
#. type: textblock
-#: debhelper.pod:661
+#: debhelper.pod:669
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"B<DH_ALWAYS_EXCLUDE=CVS:.svn>"
# type: =head1
#. type: =head1
-#: debhelper.pod:666 dh:890 dh_auto_build:47 dh_auto_clean:50
+#: debhelper.pod:674 dh:893 dh_auto_build:47 dh_auto_clean:50
#: dh_auto_configure:52 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122
#: dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:127
-#: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279
+#: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:258
#: dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77
#: dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86
#: dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106
# type: =item
#. type: =item
-#: debhelper.pod:670
+#: debhelper.pod:678
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr "F</usr/share/doc/debhelper/examples/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:672
+#: debhelper.pod:680
msgid "A set of example F<debian/rules> files that use debhelper."
msgstr "Varios ficheros de ejemplo F<debian/rules> que usan debhelper."
# type: =item
#. type: =item
-#: debhelper.pod:674
+#: debhelper.pod:682
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr "L<http://kitenet.net/~joey/code/debhelper/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:676
+#: debhelper.pod:684
msgid "Debhelper web site."
msgstr "Sitio web de Debhelper."
# type: =head1
#. type: =head1
-#: debhelper.pod:680 dh:896 dh_auto_build:53 dh_auto_clean:56
+#: debhelper.pod:688 dh:899 dh_auto_build:53 dh_auto_clean:56
#: dh_auto_configure:58 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130
#: dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:133
-#: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285
+#: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:264
#: dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83
#: dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92
#: dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112
# type: textblock
#. type: textblock
-#: debhelper.pod:682 dh:898 dh_auto_build:55 dh_auto_clean:58
+#: debhelper.pod:690 dh:901 dh_auto_build:55 dh_auto_clean:58
#: dh_auto_configure:60 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128
#: dh_clean:150 dh_compress:214 dh_fixperms:135 dh_gencontrol:90
-#: dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152
+#: dh_install:266 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152
#: dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315
#: dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77
#: dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58
#. type: textblock
#: dh:58
-msgid "The inverse of B<--with>, disables using the given addon."
-msgstr "Lo contrario de B<--with>, desactiva la extensión dada."
+msgid ""
+"The inverse of B<--with>, disables using the given addon. This option can be "
+"repeated more than once, or multiple addons to disable can be listed, "
+"separated by commas."
+msgstr ""
#. type: textblock
-#: dh:62
+#: dh:64
msgid "List all available addons."
msgstr "Lista todas las extensiones disponibles."
#. type: textblock
-#: dh:66
+#: dh:68
msgid ""
"Prints commands that would run for a given sequence, but does not run them."
msgstr ""
"ejecuta."
#. type: textblock
-#: dh:70
+#: dh:72
#, fuzzy
#| msgid ""
#| "All other options passed to B<dh> are passed on to each command it runs. "
# type: =head1
#. type: =head1
-#: dh:74 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:76 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr "EJEMPLOS"
#. type: textblock
-#: dh:76
+#: dh:78
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
"realidad:"
#. type: verbatim
-#: dh:79
+#: dh:81
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
"\n"
#. type: textblock
-#: dh:81
+#: dh:83
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
"predeterminadas de órdenes funcionan sin opciones adicionales."
#. type: verbatim
-#: dh:84 dh:105 dh:118
+#: dh:86 dh:107 dh:120
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:88
+#: dh:90
#, fuzzy
#| msgid ""
#| "Often you'll want to pass an option to a specific debhelper command. The\n"
"\t\n"
#. type: verbatim
-#: dh:91 dh:176 dh:187
+#: dh:93 dh:178 dh:189
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t\n"
#. type: verbatim
-#: dh:95
+#: dh:97
#, fuzzy, no-wrap
#| msgid ""
#| "\toverride_dh_strip:\n"
"\t\t\n"
#. type: verbatim
-#: dh:98
+#: dh:100
#, fuzzy, no-wrap
#| msgid ""
#| " dh_auto_configure -- --with-foo --enable-bar\n"
"\n"
#. type: textblock
-#: dh:101
+#: dh:103
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
"ejecutar sus propias órdenes."
#. type: verbatim
-#: dh:109
+#: dh:111
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
"\n"
#. type: verbatim
-#: dh:112
+#: dh:114
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
"\n"
#. type: textblock
-#: dh:115
+#: dh:117
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
"se ejecute una orden en particular de debhelper."
#. type: verbatim
-#: dh:122
+#: dh:124
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
"\n"
#. type: textblock
-#: dh:126
+#: dh:128
msgid ""
"If your package uses autotools and you want to freshen F<config.sub> and "
"F<config.guess> with newer versions from the B<autotools-dev> package at "
"que automatizan esto, como puede ver a continuación."
#. type: verbatim
-#: dh:131
+#: dh:133
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:135
+#: dh:137
msgid ""
"Python tools are not run by dh by default, due to the continual change in "
-"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"that area. (Before compatibility level v9, dh does run B<dh_pysupport>.) "
"Here is how to use B<dh_python2>."
msgstr ""
"dh no ejecuta las herramientas de Python de forma predeterminada debido al "
"B<dh_python2>."
#. type: verbatim
-#: dh:139
+#: dh:141
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:143
+#: dh:145
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
"detecta erróneamente que el paquete usa MakeMaker."
#. type: verbatim
-#: dh:147
+#: dh:149
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:151
+#: dh:153
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
"en el que las fuentes se ubican en un subdirectorio."
#. type: verbatim
-#: dh:155
+#: dh:157
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:159
+#: dh:161
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
"B<clean>."
#. type: verbatim
-#: dh:162
+#: dh:164
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:166
+#: dh:168
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
"j> funcionará."
#. type: verbatim
-#: dh:169
+#: dh:171
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:173
+#: dh:175
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
"cada orden."
#. type: verbatim
-#: dh:180
+#: dh:182
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
"\n"
#. type: textblock
-#: dh:183
+#: dh:185
msgid ""
"A long build process for a separate documentation package can be separated "
"out using architecture independent overrides. These will be skipped when "
msgstr ""
#. type: verbatim
-#: dh:191
+#: dh:193
#, fuzzy, no-wrap
#| msgid ""
#| "\toverride_dh_auto_configure:\n"
"\n"
#. type: verbatim
-#: dh:194
+#: dh:196
#, no-wrap
msgid ""
"\t# No tests needed for docs\n"
msgstr ""
#. type: verbatim
-#: dh:197
+#: dh:199
#, fuzzy, no-wrap
#| msgid ""
#| "\toverride_dh_installdocs:\n"
"\n"
#. type: textblock
-#: dh:200
+#: dh:202
msgid ""
"Adding to the example above, suppose you need to chmod a file, but only when "
"building the architecture dependent package, as it's not present when "
msgstr ""
#. type: verbatim
-#: dh:204
+#: dh:206
#, fuzzy, no-wrap
#| msgid ""
#| "\toverride_dh_fixperms:\n"
"\n"
#. type: =head1
-#: dh:208
+#: dh:210
msgid "INTERNALS"
msgstr "FUNCIONAMIENTO INTERNO"
#. type: textblock
-#: dh:210
+#: dh:212
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
"puede ver como funciona por dentro."
#. type: textblock
-#: dh:212
+#: dh:214
msgid ""
"Each debhelper command will record when it's successfully run in F<debian/"
"package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can tell which "
"esas órdenes otra vez."
#. type: textblock
-#: dh:217
+#: dh:219
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
"before>, B<--after> y B<--remaining> pueden anular este comportamiento."
#. type: textblock
-#: dh:222
+#: dh:224
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
"ejecuta el objeto «install»."
#. type: textblock
-#: dh:225
+#: dh:227
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
"entorno, como el nombre sugiere, está sujeto a cambios en cualquier momento."
#. type: textblock
-#: dh:230
+#: dh:232
msgid ""
"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
"sequences are passed the B<-i> option to ensure they only work on "
"la arquitectura."
#. type: =head1
-#: dh:236
+#: dh:238
msgid "DEPRECATED OPTIONS"
msgstr ""
#. type: textblock
-#: dh:238
+#: dh:240
msgid ""
"The following options are deprecated. It's much better to use override "
"targets instead."
# type: =item
#. type: =item
-#: dh:243
+#: dh:245
msgid "B<--until> I<cmd>"
msgstr "B<--until> I<orden>"
#. type: textblock
-#: dh:245
+#: dh:247
msgid "Run commands in the sequence until and including I<cmd>, then stop."
msgstr ""
"Ejecuta las órdenes en la secuencia hasta la I<orden>, inclusive, y cierra."
# type: =item
#. type: =item
-#: dh:247
+#: dh:249
msgid "B<--before> I<cmd>"
msgstr "B<--before> I<orden>"
#. type: textblock
-#: dh:249
+#: dh:251
msgid "Run commands in the sequence before I<cmd>, then stop."
msgstr "Ejecuta las órdenes en la secuencia anteriores a I<orden>, y cierra."
# type: =item
#. type: =item
-#: dh:251
+#: dh:253
msgid "B<--after> I<cmd>"
msgstr "B<--after> I<orden>"
#. type: textblock
-#: dh:253
+#: dh:255
msgid "Run commands in the sequence that come after I<cmd>."
msgstr "Ejecuta las órdenes en la secuencia posteriores a I<orden>."
# type: =item
#. type: =item
-#: dh:255
+#: dh:257
msgid "B<--remaining>"
msgstr "B<--remaining>"
#. type: textblock
-#: dh:257
+#: dh:259
msgid "Run all commands in the sequence that have yet to be run."
msgstr "Ejecuta todas las órdenes en la secuencia que aún no se han ejecutado."
#. type: textblock
-#: dh:261
+#: dh:263
msgid ""
"In the above options, I<cmd> can be a full name of a debhelper command, or a "
"substring. It'll first search for a command in the sequence exactly matching "
# type: textblock
#. type: textblock
-#: dh:892 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:54
+#: dh:895 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:54
#: dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144
#: dh_compress:208 dh_fixperms:129 dh_gconf:101 dh_gencontrol:84
-#: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173
+#: dh_install:260 dh_installcatalogs:118 dh_installchangelogs:173
#: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88
#: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108
#: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277
# type: textblock
#. type: textblock
-#: dh:894 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:56
+#: dh:897 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:56
#: dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124
#: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:131 dh_gconf:103
-#: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175
+#: dh_gencontrol:86 dh_icons:69 dh_install:262 dh_installchangelogs:175
#: dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90
#: dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110
#: dh_installifupdown:73 dh_installinfo:81 dh_installinit:279
# type: textblock
#. type: textblock
#: dh_install:15
+#, fuzzy
+#| msgid ""
+#| "B<dh_install> [B<-X>I<item>] [B<--autodest>] [B<--sourcedir=>I<dir>] "
+#| "[S<I<debhelper options>>] [S<I<file> ... I<dest>>]"
msgid ""
"B<dh_install> [B<-X>I<item>] [B<--autodest>] [B<--sourcedir=>I<dir>] "
-"[S<I<debhelper options>>] [S<I<file> ... I<dest>>]"
+"[S<I<debhelper options>>] [S<I<file|dir> ... I<destdir>>]"
msgstr ""
"B<dh_install> [B<-X>I<elemento>] [B<--autodest>] [B<--sourcedir=>I<dir>] "
"[S<I<opciones debhelper>>] [S<I<fichero> [...] I<dest>>]"
# type: =item
#. type: =item
#: dh_install:108
-msgid "I<file> ... I<dest>"
+#, fuzzy
+#| msgid "I<file> ... I<dest>"
+msgid "I<file|dir> ... I<destdir>"
msgstr "I<fichero> ... I<destino>"
# type: textblock
# type: =head1
#. type: =head1
#: dh_install:252
-msgid "EXAMPLE"
-msgstr "EJEMPLO"
-
-# type: textblock
-#. type: textblock
-#: dh_install:254
-msgid ""
-"Suppose your package's upstream F<Makefile> installs a binary, a man page, "
-"and a library into appropriate subdirectories of F<debian/tmp>. You want to "
-"put the library into package libfoo, and the rest into package foo. Your "
-"rules file will run \"B<dh_install --sourcedir=debian/tmp>\". Make F<debian/"
-"foo.install> contain:"
-msgstr ""
-"Suponga que el F<Makefile> del desarrollador original del paquete instala un "
-"binario, una página de manual, y una biblioteca en los directorios "
-"apropiados de F<debian/tmp>. Quiere poner la biblioteca en el paquete "
-"libtal, y el resto en el paquete tal. Su fichero rules ejecutará "
-"B<dh_install --sourcedir=debian/tmp>. Cree un fichero F<debian/tal.install> "
-"que contenga:"
-
-# type: verbatim
-#. type: verbatim
-#: dh_install:260
-#, no-wrap
-msgid ""
-" usr/bin\n"
-" usr/share/man/man1\n"
-"\n"
-msgstr ""
-" usr/bin\n"
-" usr/share/man/man1\n"
-"\n"
-
-# type: textblock
-#. type: textblock
-#: dh_install:263
-msgid "While F<debian/libfoo.install> contains:"
-msgstr "Mientras que F<debian/libtal.install> debe contener:"
-
-# type: verbatim
-#. type: verbatim
-#: dh_install:265
-#, no-wrap
-msgid ""
-" usr/lib/libfoo*.so.*\n"
-"\n"
-msgstr ""
-" usr/libtal*.so.*\n"
-"\n"
-
-# type: textblock
-#. type: textblock
-#: dh_install:267
-msgid ""
-"If you want a libfoo-dev package too, F<debian/libfoo-dev.install> might "
-"contain:"
-msgstr ""
-"Si además quiere un paquete libtal-dev, es posible que F<debian/libtal-dev."
-"install> contenga:"
-
-# type: verbatim
-#. type: verbatim
-#: dh_install:269
-#, no-wrap
-msgid ""
-" usr/include\n"
-" usr/lib/libfoo*.so\n"
-" usr/share/man/man3\n"
-"\n"
-msgstr ""
-" usr/include\n"
-" usr/lib/libtal*.so\n"
-" usr/share/man/man3\n"
-"\n"
-
-# type: =head1
-#. type: =head1
-#: dh_install:273
msgid "LIMITATIONS"
msgstr "LIMITACIONES"
# type: verbatim
#. type: verbatim
-#: dh_install:275
+#: dh_install:254
#, no-wrap
msgid ""
"B<dh_install> cannot rename files or directories, it can only install them\n"
# type: textblock
#. type: textblock
#: dh_installdebconf:29
+#, fuzzy
+#| msgid ""
+#| "Note that for your config script to be called by B<dpkg>, your "
+#| "F<postinst> needs to source debconf's confmodule. B<dh_installdebconf> "
+#| "does not install this statement into the F<postinst> automatically as it "
+#| "it too hard to do it right."
msgid ""
"Note that for your config script to be called by B<dpkg>, your F<postinst> "
"needs to source debconf's confmodule. B<dh_installdebconf> does not install "
-"this statement into the F<postinst> automatically as it it too hard to do it "
+"this statement into the F<postinst> automatically as it is too hard to do it "
"right."
msgstr ""
"Tenga en cuenta que para que B<dpkg> invoque su script «config», su "
msgid "Andrew Stribblehill <ads@debian.org>"
msgstr "Andrew Stribblehill <ads@debian.org>"
+#~ msgid "The inverse of B<--with>, disables using the given addon."
+#~ msgstr "Lo contrario de B<--with>, desactiva la extensión dada."
+
+#~ msgid "Build depends"
+#~ msgstr "Dependencias de construcción"
+
+# type: =head1
+#~ msgid "EXAMPLE"
+#~ msgstr "EJEMPLO"
+
+# type: textblock
+#~ msgid ""
+#~ "Suppose your package's upstream F<Makefile> installs a binary, a man "
+#~ "page, and a library into appropriate subdirectories of F<debian/tmp>. You "
+#~ "want to put the library into package libfoo, and the rest into package "
+#~ "foo. Your rules file will run \"B<dh_install --sourcedir=debian/tmp>\". "
+#~ "Make F<debian/foo.install> contain:"
+#~ msgstr ""
+#~ "Suponga que el F<Makefile> del desarrollador original del paquete instala "
+#~ "un binario, una página de manual, y una biblioteca en los directorios "
+#~ "apropiados de F<debian/tmp>. Quiere poner la biblioteca en el paquete "
+#~ "libtal, y el resto en el paquete tal. Su fichero rules ejecutará "
+#~ "B<dh_install --sourcedir=debian/tmp>. Cree un fichero F<debian/tal."
+#~ "install> que contenga:"
+
+# type: verbatim
+#~ msgid ""
+#~ " usr/bin\n"
+#~ " usr/share/man/man1\n"
+#~ "\n"
+#~ msgstr ""
+#~ " usr/bin\n"
+#~ " usr/share/man/man1\n"
+#~ "\n"
+
+# type: textblock
+#~ msgid "While F<debian/libfoo.install> contains:"
+#~ msgstr "Mientras que F<debian/libtal.install> debe contener:"
+
+# type: verbatim
+#~ msgid ""
+#~ " usr/lib/libfoo*.so.*\n"
+#~ "\n"
+#~ msgstr ""
+#~ " usr/libtal*.so.*\n"
+#~ "\n"
+
+# type: textblock
+#~ msgid ""
+#~ "If you want a libfoo-dev package too, F<debian/libfoo-dev.install> might "
+#~ "contain:"
+#~ msgstr ""
+#~ "Si además quiere un paquete libtal-dev, es posible que F<debian/libtal-"
+#~ "dev.install> contenga:"
+
+# type: verbatim
+#~ msgid ""
+#~ " usr/include\n"
+#~ " usr/lib/libfoo*.so\n"
+#~ " usr/share/man/man3\n"
+#~ "\n"
+#~ msgstr ""
+#~ " usr/include\n"
+#~ " usr/lib/libtal*.so\n"
+#~ " usr/share/man/man3\n"
+#~ "\n"
+
# type: textblock
#~ msgid ""
#~ "You can also put comments in these files; lines beginning with B<#> are "
#~ "documentación de make para los detalles sobre cómo hacer esto."
#~ msgid ""
-#~ "To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
+#~ "To patch your package using quilt, you can tell B<dh> to use quilt's "
+#~ "B<dh>\n"
#~ "sequence addons like this:\n"
#~ "\t\n"
#~ msgstr ""
#~ msgid "Debhelper compatibility levels"
#~ msgstr "Niveles de compatibilidad de debhelper"
-#~ msgid ""
-#~ "This compatability level is still open for development; use with caution."
-#~ msgstr ""
-#~ "Este nivel de compatibilidad aún está en desarrollo, utilícelo con "
-#~ "precaución."
-
#~ msgid ""
#~ "<dh_auto_configure> does not include the source package name in --"
#~ "libexecdir when using autoconf."
#~ "\t\tdh $@ --with python-central\n"
#~ "\n"
-#~ msgid ""
-#~ "Note that in the example above, dh will arrange for \"debian/rules build"
-#~ "\" to call your build-indep and build-arch targets. You do not need to "
-#~ "explicitly define the dependencies in the rules file when using dh with "
-#~ "compatability level v9. This example would be more complicated with "
-#~ "earlier compatability levels."
-#~ msgstr ""
-#~ "Tenga en cuenta que en el ejemplo anterior, dh hace que «debian/rules "
-#~ "build» invoque los objetivos build-indep y build-arch. No tiene que "
-#~ "definir de forma explícita las dependencias en el fichero «rules» al "
-#~ "utilizar dh con el nivel de compatibilidad v9. Este ejemplo sería más "
-#~ "complejo con los niveles de compatibilidad anteriores."
-
#~ msgid ""
#~ "Note that this is not the same as the B<--sourcedirectory> option used by "
#~ "the B<dh_auto_>I<*> commands. You rarely need to use this option, since "