msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2011-09-29 15:41-0400\n"
+"POT-Creation-Date: 2012-03-11 18:29-0400\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
#. type: textblock
#: debhelper.pod:72
msgid ""
-"Note that if a package is the first (or only) binary package listed in "
-"F<debian/control>, debhelper will use F<debian/foo> if no "
-"F<debian/package.foo> file can be found."
+"Note for the first (or only) binary package listed in F<debian/control>, "
+"debhelper will use F<debian/foo> when there's no F<debian/package.foo> file."
msgstr ""
#. type: textblock
#. type: textblock
#: debhelper.pod:83
msgid ""
-"In many cases, these config files are used to specify various types of "
+"Mostly, these config files are used to specify lists of various types of "
"files. Documentation or example files to install, files to move, and so on. "
"When appropriate, in cases like these, you can use standard shell wildcard "
-"characters (B<?> and B<*> and B<[>I<..>B<]> character classes) in the files."
+"characters (B<?> and B<*> and B<[>I<..>B<]> character classes) in the "
+"files. You can also put comments in these files; lines beginning with B<#> "
+"are ignored."
msgstr ""
#. type: textblock
-#: debhelper.pod:88
+#: debhelper.pod:90
msgid ""
-"You can also put comments in these files; lines beginning with B<#> are "
-"ignored."
+"The syntax of these files is intentionally kept very simple to make then "
+"easy to read, understand, and modify. If you prefer power and complexity, "
+"you can make the file executable, and write a program that outputs whatever "
+"content is appropriate for a given situation. When you do so, the output is "
+"not further processed to expand wildcards or strip comments."
msgstr ""
#. type: =head1
-#: debhelper.pod:91
+#: debhelper.pod:96
msgid "SHARED DEBHELPER OPTIONS"
msgstr ""
#. type: textblock
-#: debhelper.pod:93
+#: debhelper.pod:98
msgid "The following command line options are supported by all debhelper programs."
msgstr ""
#. type: =item
-#: debhelper.pod:97
+#: debhelper.pod:102
msgid "B<-v>, B<--verbose>"
msgstr ""
#. type: textblock
-#: debhelper.pod:99
+#: debhelper.pod:104
msgid "Verbose mode: show all commands that modify the package build directory."
msgstr ""
#. type: =item
-#: debhelper.pod:101 dh:64
+#: debhelper.pod:106 dh:66
msgid "B<--no-act>"
msgstr ""
#. type: textblock
-#: debhelper.pod:103
+#: debhelper.pod:108
msgid ""
"Do not really do anything. If used with -v, the result is that the command "
"will output what it would have done."
msgstr ""
#. type: =item
-#: debhelper.pod:106
+#: debhelper.pod:111
msgid "B<-a>, B<--arch>"
msgstr ""
#. type: textblock
-#: debhelper.pod:108
+#: debhelper.pod:113
msgid ""
"Act on architecture dependent packages that should be built for the build "
"architecture."
msgstr ""
#. type: =item
-#: debhelper.pod:111
+#: debhelper.pod:116
msgid "B<-i>, B<--indep>"
msgstr ""
#. type: textblock
-#: debhelper.pod:113
+#: debhelper.pod:118
msgid "Act on all architecture independent packages."
msgstr ""
#. type: =item
-#: debhelper.pod:115
+#: debhelper.pod:120
msgid "B<-p>I<package>, B<--package=>I<package>"
msgstr ""
#. type: textblock
-#: debhelper.pod:117
+#: debhelper.pod:122
msgid ""
"Act on the package named I<package>. This option may be specified multiple "
"times to make debhelper operate on a given set of packages."
msgstr ""
#. type: =item
-#: debhelper.pod:120
+#: debhelper.pod:125
msgid "B<-s>, B<--same-arch>"
msgstr ""
#. type: textblock
-#: debhelper.pod:122
+#: debhelper.pod:127
msgid ""
"This used to be a smarter version of the B<-a> flag, but the B<-a> flag is "
"now equally smart."
msgstr ""
#. type: =item
-#: debhelper.pod:125
+#: debhelper.pod:130
msgid "B<-N>I<package>, B<--no-package=>I<package>"
msgstr ""
#. type: textblock
-#: debhelper.pod:127
+#: debhelper.pod:132
msgid ""
"Do not act on the specified package even if an B<-a>, B<-i>, or B<-p> option "
"lists the package as one that should be acted on."
msgstr ""
#. type: =item
-#: debhelper.pod:130
+#: debhelper.pod:135
msgid "B<--remaining-packages>"
msgstr ""
#. type: textblock
-#: debhelper.pod:132
+#: debhelper.pod:137
msgid ""
"Do not act on the packages which have already been acted on by this "
"debhelper command earlier (i.e. if the command is present in the package "
msgstr ""
#. type: =item
-#: debhelper.pod:138
+#: debhelper.pod:143
msgid "B<--ignore=>I<file>"
msgstr ""
#. type: textblock
-#: debhelper.pod:140
+#: debhelper.pod:145
msgid ""
"Ignore the specified file. This can be used if F<debian/> contains a "
"debhelper config file that a debhelper command should not act on. Note that "
msgstr ""
#. type: textblock
-#: debhelper.pod:145
+#: debhelper.pod:150
msgid ""
"For example, if upstream ships a F<debian/init> that you don't want "
"B<dh_installinit> to install, use B<--ignore=debian/init>"
msgstr ""
#. type: =item
-#: debhelper.pod:148
+#: debhelper.pod:153
msgid "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
msgstr ""
#. type: textblock
-#: debhelper.pod:150
+#: debhelper.pod:155
msgid "Use I<tmpdir> for package build directory. The default is debian/I<package>"
msgstr ""
#. type: =item
-#: debhelper.pod:152
+#: debhelper.pod:157
msgid "B<--mainpackage=>I<package>"
msgstr ""
#. type: textblock
-#: debhelper.pod:154
+#: debhelper.pod:159
msgid ""
"This little-used option changes the package which debhelper considers the "
"\"main package\", that is, the first one listed in F<debian/control>, and "
msgstr ""
#. type: =item
-#: debhelper.pod:159
+#: debhelper.pod:164
msgid "B<-O=>I<option>|I<bundle>"
msgstr ""
#. type: textblock
-#: debhelper.pod:161
+#: debhelper.pod:166
msgid ""
"This is used by L<dh(1)> when passing user-specified options to all the "
"commands it runs. If the command supports the specified option or option "
msgstr ""
#. type: =head1
-#: debhelper.pod:168
+#: debhelper.pod:173
msgid "COMMON DEBHELPER OPTIONS"
msgstr ""
#. type: textblock
-#: debhelper.pod:170
+#: debhelper.pod:175
msgid ""
"The following command line options are supported by some debhelper "
"programs. See the man page of each program for a complete explanation of "
msgstr ""
#. type: =item
-#: debhelper.pod:176
+#: debhelper.pod:181
msgid "B<-n>"
msgstr ""
#. type: textblock
-#: debhelper.pod:178
+#: debhelper.pod:183
msgid "Do not modify F<postinst>, F<postrm>, etc. scripts."
msgstr ""
#. type: =item
-#: debhelper.pod:180 dh_compress:52 dh_install:76 dh_installchangelogs:68 dh_installdocs:75 dh_installexamples:41 dh_link:60 dh_makeshlibs:81 dh_md5sums:37 dh_shlibdeps:30 dh_strip:39
+#: debhelper.pod:185 dh_compress:52 dh_install:76 dh_installchangelogs:68 dh_installdocs:75 dh_installexamples:41 dh_link:60 dh_makeshlibs:81 dh_md5sums:37 dh_shlibdeps:30 dh_strip:39
msgid "B<-X>I<item>, B<--exclude=>I<item>"
msgstr ""
#. type: textblock
-#: debhelper.pod:182
+#: debhelper.pod:187
msgid ""
"Exclude an item from processing. This option may be used multiple times, to "
"exclude more than one thing."
msgstr ""
#. type: =item
-#: debhelper.pod:185 dh_bugfiles:54 dh_compress:59 dh_installdirs:35 dh_installdocs:70 dh_installexamples:36 dh_installinfo:35 dh_installman:64 dh_link:55
+#: debhelper.pod:190 dh_bugfiles:54 dh_compress:59 dh_installdirs:35 dh_installdocs:70 dh_installexamples:36 dh_installinfo:35 dh_installman:64 dh_link:55
msgid "B<-A>, B<--all>"
msgstr ""
#. type: textblock
-#: debhelper.pod:187
+#: debhelper.pod:192
msgid ""
"Makes files or other items that are specified on the command line take "
"effect in ALL packages acted on, not just the first."
msgstr ""
#. type: =head1
-#: debhelper.pod:192
+#: debhelper.pod:197
msgid "BUILD SYSTEM OPTIONS"
msgstr ""
#. type: textblock
-#: debhelper.pod:194
+#: debhelper.pod:199
msgid ""
"The following command line options are supported by all of the "
"B<dh_auto_>I<*> debhelper programs. These programs support a variety of "
msgstr ""
#. type: =item
-#: debhelper.pod:203
+#: debhelper.pod:208
msgid "B<-S>I<buildsystem>, B<--buildsystem=>I<buildsystem>"
msgstr ""
#. type: textblock
-#: debhelper.pod:205
+#: debhelper.pod:210
msgid ""
"Force use of the specified I<buildsystem>, instead of trying to auto-select "
"one which might be applicable for the package."
msgstr ""
#. type: =item
-#: debhelper.pod:208
+#: debhelper.pod:213
msgid "B<-D>I<directory>, B<--sourcedirectory=>I<directory>"
msgstr ""
#. type: textblock
-#: debhelper.pod:210
+#: debhelper.pod:215
msgid ""
"Assume that the original package source tree is at the specified "
"I<directory> rather than the top level directory of the Debian source "
msgstr ""
#. type: =item
-#: debhelper.pod:214
+#: debhelper.pod:219
msgid "B<-B>[I<directory>], B<--builddirectory=>[I<directory>]"
msgstr ""
#. type: textblock
-#: debhelper.pod:216
+#: debhelper.pod:221
msgid ""
"Enable out of source building and use the specified I<directory> as the "
"build directory. If I<directory> parameter is omitted, a default build "
msgstr ""
#. type: textblock
-#: debhelper.pod:220
+#: debhelper.pod:225
msgid ""
"If this option is not specified, building will be done in source by default "
"unless the build system requires or prefers out of source tree building. In "
msgstr ""
#. type: textblock
-#: debhelper.pod:225
+#: debhelper.pod:230
msgid ""
"If the build system prefers out of source tree building but still allows in "
"source building, the latter can be re-enabled by passing a build directory "
msgstr ""
#. type: =item
-#: debhelper.pod:229
+#: debhelper.pod:234
msgid "B<--parallel>"
msgstr ""
#. type: textblock
-#: debhelper.pod:231
+#: debhelper.pod:236
msgid ""
"Enable parallel builds if underlying build system supports them. The number "
"of parallel jobs is controlled by the B<DEB_BUILD_OPTIONS> environment "
msgstr ""
#. type: textblock
-#: debhelper.pod:236
+#: debhelper.pod:241
msgid ""
"If this option is not specified, debhelper currently defaults to not "
"allowing parallel package builds."
msgstr ""
#. type: =item
-#: debhelper.pod:239
+#: debhelper.pod:244
msgid "B<--max-parallel=>I<maximum>"
msgstr ""
#. type: textblock
-#: debhelper.pod:241
+#: debhelper.pod:246
msgid ""
"This option implies B<--parallel> and allows further limiting the number of "
"jobs that can be used in a parallel build. If the package build is known to "
msgstr ""
#. type: =item
-#: debhelper.pod:246 dh:60
+#: debhelper.pod:251 dh:62
msgid "B<--list>, B<-l>"
msgstr ""
#. type: textblock
-#: debhelper.pod:248
+#: debhelper.pod:253
msgid ""
"List all build systems supported by debhelper on this system. The list "
"includes both default and third party build systems (marked as such). Also "
msgstr ""
#. type: =head1
-#: debhelper.pod:255
-msgid "COMPATABILITY LEVELS"
+#: debhelper.pod:260
+msgid "COMPATIBILITY LEVELS"
msgstr ""
#. type: textblock
-#: debhelper.pod:257
+#: debhelper.pod:262
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
msgstr ""
#. type: textblock
-#: debhelper.pod:264
+#: debhelper.pod:269
msgid ""
"Tell debhelper what compatibility level to use by writing a number to "
-"F<debian/compat>. For example, to turn on v8 mode:"
+"F<debian/compat>. For example, to turn on v9 mode:"
msgstr ""
#. type: verbatim
-#: debhelper.pod:267
+#: debhelper.pod:272
#, no-wrap
msgid ""
-" % echo 8 > debian/compat\n"
+" % echo 9 > debian/compat\n"
"\n"
msgstr ""
#. type: textblock
-#: debhelper.pod:269
+#: debhelper.pod:274
+msgid ""
+"Your package will also need a versioned build dependency on a version of "
+"debhelper equal to (or greater than) the compatibility level your package "
+"uses. So for compatibility level 9, ensure debian/control has:"
+msgstr ""
+
+#. type: verbatim
+#: debhelper.pod:278
+#, no-wrap
+msgid ""
+" Build-Depends: debhelper (>= 9)\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:280
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
msgstr ""
#. type: textblock
-#: debhelper.pod:276
+#: debhelper.pod:287
msgid "These are the available compatibility levels:"
msgstr ""
#. type: =item
-#: debhelper.pod:280
+#: debhelper.pod:291
msgid "v1"
msgstr ""
#. type: textblock
-#: debhelper.pod:282
+#: debhelper.pod:293
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use F<debian/tmp> as the package tree "
msgstr ""
#. type: textblock
-#: debhelper.pod:287 debhelper.pod:294 debhelper.pod:317 debhelper.pod:346
+#: debhelper.pod:298 debhelper.pod:305 debhelper.pod:328 debhelper.pod:357
msgid "This mode is deprecated."
msgstr ""
#. type: =item
-#: debhelper.pod:289
+#: debhelper.pod:300
msgid "v2"
msgstr ""
#. type: textblock
-#: debhelper.pod:291
+#: debhelper.pod:302
msgid ""
"In this mode, debhelper will consistently use debian/I<package> as the "
"package tree directory for every package that is built."
msgstr ""
#. type: =item
-#: debhelper.pod:296
+#: debhelper.pod:307
msgid "v3"
msgstr ""
#. type: textblock
-#: debhelper.pod:298
+#: debhelper.pod:309
msgid "This mode works like v2, with the following additions:"
msgstr ""
#. type: =item
-#: debhelper.pod:302 debhelper.pod:307 debhelper.pod:311 debhelper.pod:325 debhelper.pod:330 debhelper.pod:335 debhelper.pod:340 debhelper.pod:354 debhelper.pod:358 debhelper.pod:363 debhelper.pod:367 debhelper.pod:379 debhelper.pod:384 debhelper.pod:390 debhelper.pod:396 debhelper.pod:409 debhelper.pod:416 debhelper.pod:420 debhelper.pod:424 debhelper.pod:439 debhelper.pod:443 debhelper.pod:451 debhelper.pod:456 debhelper.pod:470 debhelper.pod:475 debhelper.pod:482 debhelper.pod:487 debhelper.pod:491 debhelper.pod:497
+#: debhelper.pod:313 debhelper.pod:318 debhelper.pod:322 debhelper.pod:336 debhelper.pod:341 debhelper.pod:346 debhelper.pod:351 debhelper.pod:365 debhelper.pod:369 debhelper.pod:374 debhelper.pod:378 debhelper.pod:390 debhelper.pod:395 debhelper.pod:401 debhelper.pod:407 debhelper.pod:420 debhelper.pod:427 debhelper.pod:431 debhelper.pod:435 debhelper.pod:448 debhelper.pod:452 debhelper.pod:460 debhelper.pod:465 debhelper.pod:479 debhelper.pod:484 debhelper.pod:491 debhelper.pod:496 debhelper.pod:501 debhelper.pod:505 debhelper.pod:511 debhelper.pod:516 debhelper.pod:521 debhelper.pod:536
msgid "-"
msgstr ""
#. type: textblock
-#: debhelper.pod:304
+#: debhelper.pod:315
msgid ""
"Debhelper config files support globbing via B<*> and B<?>, when "
"appropriate. To turn this off and use those characters raw, just prefix with "
msgstr ""
#. type: textblock
-#: debhelper.pod:309
+#: debhelper.pod:320
msgid ""
"B<dh_makeshlibs> makes the F<postinst> and F<postrm> scripts call "
"B<ldconfig>."
msgstr ""
#. type: textblock
-#: debhelper.pod:313
+#: debhelper.pod:324
msgid ""
"Every file in F<etc/> is automatically flagged as a conffile by "
"B<dh_installdeb>."
msgstr ""
#. type: =item
-#: debhelper.pod:319
+#: debhelper.pod:330
msgid "v4"
msgstr ""
#. type: textblock
-#: debhelper.pod:321
+#: debhelper.pod:332
msgid "Changes from v3 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:327
+#: debhelper.pod:338
msgid ""
"B<dh_makeshlibs -V> will not include the Debian part of the version number "
"in the generated dependency line in the shlibs file."
msgstr ""
#. type: textblock
-#: debhelper.pod:332
+#: debhelper.pod:343
msgid ""
"You are encouraged to put the new B<${misc:Depends}> into F<debian/control> "
"to supplement the B<${shlibs:Depends}> field."
msgstr ""
#. type: textblock
-#: debhelper.pod:337
+#: debhelper.pod:348
msgid ""
"B<dh_fixperms> will make all files in F<bin/> directories and in "
"F<etc/init.d> executable."
msgstr ""
#. type: textblock
-#: debhelper.pod:342
+#: debhelper.pod:353
msgid "B<dh_link> will correct existing links to conform with policy."
msgstr ""
#. type: =item
-#: debhelper.pod:348
+#: debhelper.pod:359
msgid "v5"
msgstr ""
#. type: textblock
-#: debhelper.pod:350
+#: debhelper.pod:361
msgid "Changes from v4 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:356
+#: debhelper.pod:367
msgid "Comments are ignored in debhelper config files."
msgstr ""
#. type: textblock
-#: debhelper.pod:360
+#: debhelper.pod:371
msgid ""
"B<dh_strip --dbg-package> now specifies the name of a package to put "
"debugging symbols in, not the packages to take the symbols from."
msgstr ""
#. type: textblock
-#: debhelper.pod:365
+#: debhelper.pod:376
msgid "B<dh_installdocs> skips installing empty files."
msgstr ""
#. type: textblock
-#: debhelper.pod:369
+#: debhelper.pod:380
msgid "B<dh_install> errors out if wildcards expand to nothing."
msgstr ""
#. type: =item
-#: debhelper.pod:373
+#: debhelper.pod:384
msgid "v6"
msgstr ""
#. type: textblock
-#: debhelper.pod:375
+#: debhelper.pod:386
msgid "Changes from v5 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:381
+#: debhelper.pod:392
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the F<prerm> and F<postrm> scripts."
msgstr ""
#. type: textblock
-#: debhelper.pod:386
+#: debhelper.pod:397
msgid ""
"B<dh_installwm> will install a slave manpage link for "
"F<x-window-manager.1.gz>, if it sees the man page in F<usr/share/man/man1> "
msgstr ""
#. type: textblock
-#: debhelper.pod:392
+#: debhelper.pod:403
msgid ""
"B<dh_builddeb> did not previously delete everything matching "
"B<DH_ALWAYS_EXCLUDE>, if it was set to a list of things to exclude, such as "
msgstr ""
#. type: textblock
-#: debhelper.pod:398
+#: debhelper.pod:409
msgid ""
"B<dh_installman> allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
msgstr ""
#. type: =item
-#: debhelper.pod:403
+#: debhelper.pod:414
msgid "v7"
msgstr ""
#. type: textblock
-#: debhelper.pod:405
+#: debhelper.pod:416
msgid "Changes from v6 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:411
+#: debhelper.pod:422
msgid ""
"B<dh_install>, will fall back to looking for files in F<debian/tmp> if it "
"doesn't find them in the current directory (or wherever you tell it look "
msgstr ""
#. type: textblock
-#: debhelper.pod:418
+#: debhelper.pod:429
msgid "B<dh_clean> will read F<debian/clean> and delete files listed there."
msgstr ""
#. type: textblock
-#: debhelper.pod:422
+#: debhelper.pod:433
msgid "B<dh_clean> will delete toplevel F<*-stamp> files."
msgstr ""
#. type: textblock
-#: debhelper.pod:426
+#: debhelper.pod:437
msgid ""
"B<dh_installchangelogs> will guess at what file is the upstream changelog if "
"none is specified."
msgstr ""
#. type: =item
-#: debhelper.pod:431
+#: debhelper.pod:442
msgid "v8"
msgstr ""
#. type: textblock
-#: debhelper.pod:433
-msgid "This is the recommended mode of operation."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:435
+#: debhelper.pod:444
msgid "Changes from v7 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:441
+#: debhelper.pod:450
msgid "Commands will fail rather than warning when they are passed unknown options."
msgstr ""
#. type: textblock
-#: debhelper.pod:445
+#: debhelper.pod:454
msgid ""
"B<dh_makeshlibs> will run B<dpkg-gensymbols> on all shared libraries that it "
"generates shlibs files for. So B<-X> can be used to exclude libraries. "
msgstr ""
#. type: textblock
-#: debhelper.pod:453
+#: debhelper.pod:462
msgid ""
"B<dh> requires the sequence to run be specified as the first parameter, and "
"any switches come after it. Ie, use \"B<dh $@ --foo>\", not \"B<dh --foo "
msgstr ""
#. type: textblock
-#: debhelper.pod:458
+#: debhelper.pod:467
msgid ""
"B<dh_auto_>I<*> prefer to use Perl's B<Module::Build> in preference to "
"F<Makefile.PL>."
msgstr ""
#. type: =item
-#: debhelper.pod:462
+#: debhelper.pod:471
msgid "v9"
msgstr ""
#. type: textblock
-#: debhelper.pod:464
-msgid "This compatibility level is still open for development; use with caution."
+#: debhelper.pod:473
+msgid "This is the recommended mode of operation."
msgstr ""
#. type: textblock
-#: debhelper.pod:466
+#: debhelper.pod:475
msgid "Changes from v8 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:472
+#: debhelper.pod:481
msgid ""
"Multiarch support. In particular, B<dh_auto_configure> passes multiarch "
"directories to autoconf in --libdir and --libexecdir."
msgstr ""
#. type: textblock
-#: debhelper.pod:477
+#: debhelper.pod:486
msgid ""
"dh is aware of the usual dependencies between targets in debian/rules. So, "
"\"dh binary\" will run any build, build-arch, build-indep, install, etc "
msgstr ""
#. type: textblock
-#: debhelper.pod:484
+#: debhelper.pod:493
+msgid ""
+"B<dh_strip> compresses debugging symbol files to reduce the installed size "
+"of -dbg packages."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:498
msgid ""
"B<dh_auto_configure> does not include the source package name in "
"--libexecdir when using autoconf."
msgstr ""
#. type: textblock
-#: debhelper.pod:489
+#: debhelper.pod:503
msgid "B<dh> does not default to enabling --with=python-support"
msgstr ""
#. type: textblock
-#: debhelper.pod:493
+#: debhelper.pod:507
msgid ""
"All of the B<dh_auto_>I<*> debhelper programs and B<dh> set environment "
-"variables listed by B<dpkg-buildflags>, unless they are already set. They "
-"support DEB_BUILD_OPTIONS=noopt too."
+"variables listed by B<dpkg-buildflags>, unless they are already set."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:513
+msgid ""
+"B<dh_auto_configure> passes B<dpkg-buildflags> CFLAGS, CPPFLAGS, and LDFLAGS "
+"to perl F<Makefile.PL> and F<Build.PL>"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:518
+msgid ""
+"B<dh_strip> puts separated debug symbols in a location based on their "
+"build-id."
msgstr ""
#. type: textblock
-#: debhelper.pod:499
+#: debhelper.pod:523
msgid ""
-"B<dh_auto_configure> passes CFLAGS to F<Makefile.PL> using the OPTIMIZE "
-"variable."
+"Executable debhelper config files are run and their output used as the "
+"configuration."
+msgstr ""
+
+#. type: =item
+#: debhelper.pod:528
+msgid "v10"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:530
+msgid "This compatibility level is still open for development; use with caution."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:532
+msgid "Changes from v9 are:"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:538
+msgid "None yet.."
msgstr ""
#. type: =head1
-#: debhelper.pod:506 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49
+#: debhelper.pod:544 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49
msgid "NOTES"
msgstr ""
#. type: =head2
-#: debhelper.pod:508
+#: debhelper.pod:546
msgid "Multiple binary package support"
msgstr ""
#. type: textblock
-#: debhelper.pod:510
+#: debhelper.pod:548
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
msgstr ""
#. type: textblock
-#: debhelper.pod:518
+#: debhelper.pod:556
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, "
msgstr ""
#. type: =head2
-#: debhelper.pod:524
+#: debhelper.pod:562
msgid "Automatic generation of Debian install scripts"
msgstr ""
#. type: textblock
-#: debhelper.pod:526
+#: debhelper.pod:564
msgid ""
"Some debhelper commands will automatically generate parts of Debian "
"maintainer scripts. If you want these automatically generated things "
msgstr ""
#. type: textblock
-#: debhelper.pod:533
+#: debhelper.pod:571
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
msgstr ""
#. type: textblock
-#: debhelper.pod:536
+#: debhelper.pod:574
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
msgstr ""
#. type: textblock
-#: debhelper.pod:539
+#: debhelper.pod:577
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a Perl script. If you would like to embed it into a Perl script, here "
msgstr ""
#. type: verbatim
-#: debhelper.pod:544
+#: debhelper.pod:582
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
msgstr ""
#. type: =head2
-#: debhelper.pod:550
+#: debhelper.pod:588
msgid "Automatic generation of miscellaneous dependencies."
msgstr ""
#. type: textblock
-#: debhelper.pod:552
+#: debhelper.pod:590
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
msgstr ""
#. type: textblock
-#: debhelper.pod:560
+#: debhelper.pod:598
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called "
msgstr ""
#. type: textblock
-#: debhelper.pod:565
+#: debhelper.pod:603
msgid ""
"This is entirely independent of the standard B<${shlibs:Depends}> generated "
"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by "
msgstr ""
#. type: =head2
-#: debhelper.pod:570
+#: debhelper.pod:608
msgid "Package build directories"
msgstr ""
#. type: textblock
-#: debhelper.pod:572
+#: debhelper.pod:610
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/I<package>."
msgstr ""
#. type: textblock
-#: debhelper.pod:575
+#: debhelper.pod:613
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the B<-P> flag. For example, \"B<dh_installdocs "
msgstr ""
#. type: =head2
-#: debhelper.pod:583
+#: debhelper.pod:621
msgid "udebs"
msgstr ""
#. type: textblock
-#: debhelper.pod:585
+#: debhelper.pod:623
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
-"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>, and "
-"build-depend on debhelper (>= 4.2). Debhelper will try to create udebs that "
-"comply with debian-installer policy, by making the generated package files "
-"end in F<.udeb>, not installing any documentation into a udeb, skipping over "
-"F<preinst>, F<postrm>, F<prerm>, and F<config> scripts, etc."
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:592
-msgid "Build depends"
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:594
-msgid ""
-"Once your package uses debhelper to build, be sure to add debhelper to your "
-"Build-Depends line in F<debian/control>. You should build-depend on a "
-"version of debhelper equal to (or greater than) the debhelper compatibility "
-"level your package uses. So if your package used compatibility level 7:"
-msgstr ""
-
-#. type: verbatim
-#: debhelper.pod:600
-#, no-wrap
-msgid ""
-" Build-Depends: debhelper (>= 7)\n"
-"\n"
+"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>. "
+"Debhelper will try to create udebs that comply with debian-installer policy, "
+"by making the generated package files end in F<.udeb>, not installing any "
+"documentation into a udeb, skipping over F<preinst>, F<postrm>, F<prerm>, "
+"and F<config> scripts, etc."
msgstr ""
#. type: =head1
-#: debhelper.pod:602
+#: debhelper.pod:630
msgid "ENVIRONMENT"
msgstr ""
#. type: =item
-#: debhelper.pod:606
+#: debhelper.pod:634
msgid "B<DH_VERBOSE>"
msgstr ""
#. type: textblock
-#: debhelper.pod:608
+#: debhelper.pod:636
msgid ""
"Set to B<1> to enable verbose mode. Debhelper will output every command it "
"runs that modifies files on the build system."
msgstr ""
#. type: =item
-#: debhelper.pod:611
+#: debhelper.pod:639
msgid "B<DH_COMPAT>"
msgstr ""
#. type: textblock
-#: debhelper.pod:613
+#: debhelper.pod:641
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in F<debian/compat>."
msgstr ""
#. type: =item
-#: debhelper.pod:616
+#: debhelper.pod:644
msgid "B<DH_NO_ACT>"
msgstr ""
#. type: textblock
-#: debhelper.pod:618
+#: debhelper.pod:646
msgid "Set to B<1> to enable no-act mode."
msgstr ""
#. type: =item
-#: debhelper.pod:620
+#: debhelper.pod:648
msgid "B<DH_OPTIONS>"
msgstr ""
#. type: textblock
-#: debhelper.pod:622
+#: debhelper.pod:650
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands."
msgstr ""
#. type: textblock
-#: debhelper.pod:625
+#: debhelper.pod:653
msgid ""
"When using L<dh(1)>, it can be passed options that will be passed on to each "
"debhelper command, which is generally better than using DH_OPTIONS."
msgstr ""
#. type: =item
-#: debhelper.pod:628
+#: debhelper.pod:656
msgid "B<DH_ALWAYS_EXCLUDE>"
msgstr ""
#. type: textblock
-#: debhelper.pod:630
+#: debhelper.pod:658
msgid ""
"If set, this adds the value the variable is set to to the B<-X> options of "
"all commands that support the B<-X> option. Moreover, B<dh_builddeb> will "
msgstr ""
#. type: textblock
-#: debhelper.pod:634
+#: debhelper.pod:662
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories from "
msgstr ""
#. type: textblock
-#: debhelper.pod:641
+#: debhelper.pod:669
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"B<DH_ALWAYS_EXCLUDE=CVS:.svn>"
msgstr ""
#. type: =head1
-#: debhelper.pod:646 dh:883 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:52 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122 dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:127 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:78 dh_installlogrotate:50 dh_installman:259 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
+#: debhelper.pod:674 dh:893 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:52 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122 dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:127 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:258 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:78 dh_installlogrotate:50 dh_installman:259 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:242 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
msgid "SEE ALSO"
msgstr ""
#. type: =item
-#: debhelper.pod:650
+#: debhelper.pod:678
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:652
+#: debhelper.pod:680
msgid "A set of example F<debian/rules> files that use debhelper."
msgstr ""
#. type: =item
-#: debhelper.pod:654
+#: debhelper.pod:682
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:656
+#: debhelper.pod:684
msgid "Debhelper web site."
msgstr ""
#. type: =head1
-#: debhelper.pod:660 dh:889 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:58 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130 dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:133 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:84 dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
+#: debhelper.pod:688 dh:899 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:58 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130 dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:133 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:264 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:84 dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:248 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
msgid "AUTHOR"
msgstr ""
#. type: textblock
-#: debhelper.pod:662 dh:891 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:60 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128 dh_clean:150 dh_compress:214 dh_fixperms:135 dh_gencontrol:90 dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:267 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
+#: debhelper.pod:690 dh:901 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:60 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128 dh_clean:150 dh_compress:214 dh_fixperms:135 dh_gencontrol:90 dh_install:266 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:267 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:250 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
msgid "Joey Hess <joeyh@debian.org>"
msgstr ""
#. type: textblock
#: dh:58
-msgid "The inverse of B<--with>, disables using the given addon."
+msgid ""
+"The inverse of B<--with>, disables using the given addon. This option can be "
+"repeated more than once, or multiple addons to disable can be listed, "
+"separated by commas."
msgstr ""
#. type: textblock
-#: dh:62
+#: dh:64
msgid "List all available addons."
msgstr ""
#. type: textblock
-#: dh:66
+#: dh:68
msgid "Prints commands that would run for a given sequence, but does not run them."
msgstr ""
#. type: textblock
-#: dh:70
+#: dh:72
msgid ""
"Other options passed to B<dh> are passed on to each command it runs. This "
"can be used to set an option like B<-v> or B<-X> or B<-N>, as well as for "
msgstr ""
#. type: =head1
-#: dh:74 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:76 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr ""
#. type: textblock
-#: dh:76
+#: dh:78
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
msgstr ""
#. type: verbatim
-#: dh:79
+#: dh:81
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
msgstr ""
#. type: textblock
-#: dh:81
+#: dh:83
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
msgstr ""
#. type: verbatim
-#: dh:84 dh:91 dh:105 dh:118
+#: dh:86 dh:107 dh:120
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
msgstr ""
+#. type: textblock
+#: dh:90
+msgid ""
+"Often you'll want to pass an option to a specific debhelper command. The "
+"easy way to do with is by adding an override target for that command."
+msgstr ""
+
#. type: verbatim
-#: dh:88
+#: dh:93 dh:178 dh:189
#, no-wrap
msgid ""
-"Often you'll want to pass an option to a specific debhelper command. The\n"
-"easy way to do with is by adding an override target for that command.\n"
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@\n"
"\t\n"
msgstr ""
#. type: verbatim
-#: dh:95
+#: dh:97
#, no-wrap
msgid ""
"\toverride_dh_strip:\n"
"\t\tdh_strip -Xfoo\n"
-"\t\t\n"
+"\t\n"
msgstr ""
#. type: verbatim
-#: dh:98
+#: dh:100
#, no-wrap
msgid ""
-"\toverride_dh_installdocs:\n"
-"\t\tdh_installdocs README TODO\n"
+"\toverride_dh_auto_configure:\n"
+"\t\tdh_auto_configure -- --with-foo --disable-bar\n"
"\n"
msgstr ""
#. type: textblock
-#: dh:101
+#: dh:103
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
msgstr ""
#. type: verbatim
-#: dh:109
+#: dh:111
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
msgstr ""
#. type: verbatim
-#: dh:112
+#: dh:114
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
msgstr ""
#. type: textblock
-#: dh:115
+#: dh:117
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
msgstr ""
#. type: verbatim
-#: dh:122
+#: dh:124
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
msgstr ""
#. type: textblock
-#: dh:126
+#: dh:128
msgid ""
"If your package uses autotools and you want to freshen F<config.sub> and "
"F<config.guess> with newer versions from the B<autotools-dev> package at "
msgstr ""
#. type: verbatim
-#: dh:131
+#: dh:133
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:135
+#: dh:137
msgid ""
"Python tools are not run by dh by default, due to the continual change in "
-"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"that area. (Before compatibility level v9, dh does run B<dh_pysupport>.) "
"Here is how to use B<dh_python2>."
msgstr ""
#. type: verbatim
-#: dh:139
+#: dh:141
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:143
+#: dh:145
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
msgstr ""
#. type: verbatim
-#: dh:147
+#: dh:149
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:151
+#: dh:153
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
msgstr ""
#. type: verbatim
-#: dh:155
+#: dh:157
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:159
+#: dh:161
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
msgstr ""
#. type: verbatim
-#: dh:162
+#: dh:164
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:166
+#: dh:168
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
msgstr ""
#. type: verbatim
-#: dh:169
+#: dh:171
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:173
+#: dh:175
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
msgstr ""
#. type: verbatim
-#: dh:176 dh:187
-#, no-wrap
-msgid ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@\n"
-"\t\n"
-msgstr ""
-
-#. type: verbatim
-#: dh:180
+#: dh:182
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
msgstr ""
#. type: textblock
-#: dh:183
+#: dh:185
msgid ""
"A long build process for a separate documentation package can be separated "
"out using architecture independent overrides. These will be skipped when "
msgstr ""
#. type: verbatim
-#: dh:191
+#: dh:193
#, no-wrap
msgid ""
"\toverride_dh_auto_build-indep:\n"
msgstr ""
#. type: verbatim
-#: dh:194
+#: dh:196
#, no-wrap
msgid ""
"\t# No tests needed for docs\n"
msgstr ""
#. type: verbatim
-#: dh:197
+#: dh:199
#, no-wrap
msgid ""
"\toverride_dh_auto_install-indep:\n"
msgstr ""
#. type: textblock
-#: dh:200
+#: dh:202
msgid ""
"Adding to the example above, suppose you need to chmod a file, but only when "
"building the architecture dependent package, as it's not present when "
msgstr ""
#. type: verbatim
-#: dh:204
+#: dh:206
#, no-wrap
msgid ""
"\toverride_dh_fixperms-arch:\n"
msgstr ""
#. type: =head1
-#: dh:208
+#: dh:210
msgid "INTERNALS"
msgstr ""
#. type: textblock
-#: dh:210
+#: dh:212
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
msgstr ""
#. type: textblock
-#: dh:212
+#: dh:214
msgid ""
"Each debhelper command will record when it's successfully run in "
"F<debian/package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can "
msgstr ""
#. type: textblock
-#: dh:217
+#: dh:219
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
msgstr ""
#. type: textblock
-#: dh:222
+#: dh:224
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:225
+#: dh:227
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
msgstr ""
#. type: textblock
-#: dh:230
+#: dh:232
msgid ""
"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
"sequences are passed the B<-i> option to ensure they only work on "
msgstr ""
#. type: =head1
-#: dh:236
+#: dh:238
msgid "DEPRECATED OPTIONS"
msgstr ""
#. type: textblock
-#: dh:238
+#: dh:240
msgid ""
"The following options are deprecated. It's much better to use override "
"targets instead."
msgstr ""
#. type: =item
-#: dh:243
+#: dh:245
msgid "B<--until> I<cmd>"
msgstr ""
#. type: textblock
-#: dh:245
+#: dh:247
msgid "Run commands in the sequence until and including I<cmd>, then stop."
msgstr ""
#. type: =item
-#: dh:247
+#: dh:249
msgid "B<--before> I<cmd>"
msgstr ""
#. type: textblock
-#: dh:249
+#: dh:251
msgid "Run commands in the sequence before I<cmd>, then stop."
msgstr ""
#. type: =item
-#: dh:251
+#: dh:253
msgid "B<--after> I<cmd>"
msgstr ""
#. type: textblock
-#: dh:253
+#: dh:255
msgid "Run commands in the sequence that come after I<cmd>."
msgstr ""
#. type: =item
-#: dh:255
+#: dh:257
msgid "B<--remaining>"
msgstr ""
#. type: textblock
-#: dh:257
+#: dh:259
msgid "Run all commands in the sequence that have yet to be run."
msgstr ""
#. type: textblock
-#: dh:261
+#: dh:263
msgid ""
"In the above options, I<cmd> can be a full name of a debhelper command, or a "
"substring. It'll first search for a command in the sequence exactly matching "
msgstr ""
#. type: textblock
-#: dh:885 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:54 dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144 dh_compress:208 dh_fixperms:129 dh_gconf:101 dh_gencontrol:84 dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:80 dh_installlogrotate:52 dh_installman:261 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
+#: dh:895 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:54 dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144 dh_compress:208 dh_fixperms:129 dh_gconf:101 dh_gencontrol:84 dh_install:260 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:80 dh_installlogrotate:52 dh_installman:261 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:244 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
msgid "L<debhelper(7)>"
msgstr ""
#. type: textblock
-#: dh:887 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:56 dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124 dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:131 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
+#: dh:897 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:56 dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124 dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:131 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:262 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:246 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
msgid "This program is a part of debhelper."
msgstr ""
#: dh_install:15
msgid ""
"B<dh_install> [B<-X>I<item>] [B<--autodest>] [B<--sourcedir=>I<dir>] "
-"[S<I<debhelper options>>] [S<I<file> ... I<dest>>]"
+"[S<I<debhelper options>>] [S<I<file|dir> ... I<destdir>>]"
msgstr ""
#. type: textblock
#. type: =item
#: dh_install:108
-msgid "I<file> ... I<dest>"
+msgid "I<file|dir> ... I<destdir>"
msgstr ""
#. type: textblock
#. type: =head1
#: dh_install:252
-msgid "EXAMPLE"
-msgstr ""
-
-#. type: textblock
-#: dh_install:254
-msgid ""
-"Suppose your package's upstream F<Makefile> installs a binary, a man page, "
-"and a library into appropriate subdirectories of F<debian/tmp>. You want to "
-"put the library into package libfoo, and the rest into package foo. Your "
-"rules file will run \"B<dh_install --sourcedir=debian/tmp>\". Make "
-"F<debian/foo.install> contain:"
-msgstr ""
-
-#. type: verbatim
-#: dh_install:260
-#, no-wrap
-msgid ""
-" usr/bin\n"
-" usr/share/man/man1\n"
-"\n"
-msgstr ""
-
-#. type: textblock
-#: dh_install:263
-msgid "While F<debian/libfoo.install> contains:"
-msgstr ""
-
-#. type: verbatim
-#: dh_install:265
-#, no-wrap
-msgid ""
-" usr/lib/libfoo*.so.*\n"
-"\n"
-msgstr ""
-
-#. type: textblock
-#: dh_install:267
-msgid ""
-"If you want a libfoo-dev package too, F<debian/libfoo-dev.install> might "
-"contain:"
-msgstr ""
-
-#. type: verbatim
-#: dh_install:269
-#, no-wrap
-msgid ""
-" usr/include\n"
-" usr/lib/libfoo*.so\n"
-" usr/share/man/man3\n"
-"\n"
-msgstr ""
-
-#. type: =head1
-#: dh_install:273
msgid "LIMITATIONS"
msgstr ""
#. type: verbatim
-#: dh_install:275
+#: dh_install:254
#, no-wrap
msgid ""
"B<dh_install> cannot rename files or directories, it can only install them\n"
msgid ""
"Note that for your config script to be called by B<dpkg>, your F<postinst> "
"needs to source debconf's confmodule. B<dh_installdebconf> does not install "
-"this statement into the F<postinst> automatically as it it too hard to do it "
+"this statement into the F<postinst> automatically as it is too hard to do it "
"right."
msgstr ""
#: dh_installinit:14
msgid ""
"B<dh_installinit> [S<I<debhelper options>>] [B<--name=>I<name>] [B<-n>] "
-"[B<-R>] [B<-r>] [B<-d>] [B<-O>] [S<B<--> I<params>>]"
+"[B<-R>] [B<-r>] [B<-d>] [S<B<--> I<params>>]"
msgstr ""
#. type: textblock
#: dh_installinit:23
msgid ""
"It also automatically generates the F<postinst> and F<postrm> and F<prerm> "
-"commands needed to set up the symlinks in F</etc/rc*.d/> and to start and "
-"stop the init scripts."
+"commands needed to set up the symlinks in F</etc/rc*.d/> to start and stop "
+"the init scripts."
msgstr ""
#. type: =item
msgid ""
"If your package installs Python modules in non-standard directories, you can "
"make F<dh_python> check those directories by passing their names on the "
-"command line. By default, it will check F</usr/lib/site-python, "
-"/usr/lib/$PACKAGE>, F</usr/share/$PACKAGE>, F</usr/lib/games/$PACKAGE>, "
+"command line. By default, it will check F</usr/lib/site-python>, "
+"F</usr/lib/$PACKAGE>, F</usr/share/$PACKAGE>, F</usr/lib/games/$PACKAGE>, "
"F</usr/share/games/$PACKAGE> and F</usr/lib/python?.?/site-packages>."
msgstr ""