2 * Backlighting code for PS2AVRGB boards (ATMEGA32A)
3 * Kenneth A. (github.com/krusli | krusli.me)
4 Modified by Wayne K Jones (github.com/WarmCatUK) 2018
10 #include <avr/pgmspace.h>
11 #include <avr/interrupt.h>
13 #include "backlight_custom.h"
14 #include "breathing_custom.h"
20 // Port D: digital pins of the AVR chipset
21 //#define NUMLOCK_PORT (1 << 2) // 2nd pin of Port D (digital)
22 #define CAPSLOCK_PORT (1 << 1) // 1st pin
23 #define BACKLIGHT_PORT (1 << 4) // D4
24 //#define SCROLLLOCK_PORT (1 << 6) // D6
26 #define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64
27 #define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default
29 #define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask
32 #define TIMER_TOP 255 // 8 bit PWM
34 extern backlight_config_t backlight_config;
38 * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
39 * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
40 * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
41 * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
42 * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
46 // turn LEDs on and off depending on USB caps/num/scroll lock states.
47 __attribute__ ((weak))
48 void led_set_user(uint8_t usb_led) {
50 if (usb_led & (1 << USB_LED_NUM_LOCK)) {
53 PORTD |= NUMLOCK_PORT;
56 DDRD &= ~NUMLOCK_PORT;
57 PORTD &= ~NUMLOCK_PORT;
60 if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
61 DDRD |= CAPSLOCK_PORT;
62 PORTD |= CAPSLOCK_PORT;
64 DDRD &= ~CAPSLOCK_PORT;
65 PORTD &= ~CAPSLOCK_PORT;
68 if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
69 DDRD |= SCROLLLOCK_PORT;
70 PORTD |= SCROLLLOCK_PORT;
72 DDRD &= ~SCROLLLOCK_PORT;
73 PORTD &= ~SCROLLLOCK_PORT;
78 #ifdef BACKLIGHT_ENABLE
80 // sets up Timer 1 for 8-bit PWM
81 void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
83 TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
84 TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
86 // clear output compare value A
90 // clear output comparator registers for B
91 OCR1BH = 0; // outb(OCR1BH, 0);
92 OCR1BL = 0; // outb(OCR1BL, 0);
96 void timer1Init(void) {
97 // timer1SetPrescaler(TIMER1PRESCALE)
99 (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
102 TCNT1H = 0; // outb(TCNT1H, 0);
103 TCNT1L = 0; // outb(TCNT1L, 0);
105 // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
106 TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
111 void timer1UnInit(void) {
112 // set prescaler back to NONE
113 (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP
115 // disable timer overflow interrupt
116 TIMSK &= ~_BV(TOIE1); // overflow bit?
124 // handle TCNT1 overflow
125 //! Interrupt handler for tcnt1 overflow interrupt
126 ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
129 // handle breathing here
130 #ifdef BACKLIGHT_BREATHING
131 if (is_breathing()) {
132 custom_breathing_handler();
136 // TODO call user defined function
139 // enable timer 1 PWM
141 void timer1PWMBEnable(void) {
142 // turn on channel B (OC1B) PWM output
143 // set OC1B as non-inverted PWM
144 TCCR1A |= _BV(COM1B1);
145 TCCR1A &= ~_BV(COM1B0);
148 // disable timer 1 PWM
150 void timer1PWMBDisable(void) {
151 TCCR1A &= ~_BV(COM1B1);
152 TCCR1A &= ~_BV(COM1B0);
155 void enableBacklight(void) {
156 DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
157 PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
160 void disableBacklight(void) {
161 // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
162 PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
165 void startPWM(void) {
177 void b_led_init_ports(void) {
178 /* turn backlight on/off depending on user preference */
179 #if BACKLIGHT_ON_STATE == 0
180 // DDRx register: sets the direction of Port D
181 // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
182 PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
184 DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
185 PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
191 #ifdef BACKLIGHT_BREATHING
196 void b_led_set(uint8_t level) {
197 if (level > BACKLIGHT_LEVELS) {
198 level = BACKLIGHT_LEVELS;
201 setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
204 // called every matrix scan
205 void b_led_task(void) {
206 // do nothing for now
209 void setPWM(uint16_t xValue) {
210 if (xValue > TIMER_TOP) {
213 OCR1B = xValue; // timer1PWMBSet(xValue);
216 #endif // BACKLIGHT_ENABLE