2 * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
4 * This program is free software: you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation, either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program. If not, see <http://www.gnu.org/licenses/>.
21 /* USB Device descriptor parameter */
22 #define DEVICE_VER 0x0003
27 #define MATRIX_ROWS 10
31 * Keyboard Matrix Assignments
33 * Change this to how you wired your keyboard
34 * COLS: AVR pins used for columns, left to right
35 * ROWS: AVR pins used for rows, top to bottom
36 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
37 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
40 /* Note: These are not used for arm boards. They're here purely as documentation.
41 * #define MATRIX_ROW_PINS { PB0, PB1, PB2, PA15, PA10 }
42 * #define MATRIX_COL_PINS { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC14, PC15, PC13, PB5, PB6 }
50 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
53 /* Prevent modifiers from being stuck on after layer changes. */
54 #define PREVENT_STUCK_MODIFIERS
56 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
57 //#define LOCKING_SUPPORT_ENABLE
58 /* Locking resynchronize hack */
59 //#define LOCKING_RESYNC_ENABLE
64 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
65 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
66 * makefile for this to work.)
68 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
69 * until the next keyboard reset.
71 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
72 * fully operational during normal computer usage.
74 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
75 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
76 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
82 /* key combination for magic key command */
83 #define IS_COMMAND() ( \
84 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
88 * Feature disable options
89 * These options are also useful to firmware size reduction.
92 /* disable debug print */
98 /* disable action features */
99 //#define NO_ACTION_LAYER
100 //#define NO_ACTION_TAPPING
101 //#define NO_ACTION_ONESHOT
102 //#define NO_ACTION_MACRO
103 //#define NO_ACTION_FUNCTION
109 /* Prevent use of disabled MIDI features in the keymap */
110 //#define MIDI_ENABLE_STRICT 1
112 /* enable basic MIDI features:
113 - MIDI notes can be sent when in Music mode is on
117 /* enable advanced MIDI features:
118 - MIDI notes can be added to the keymap
119 - Octave shift and transpose
120 - Virtual sustain, portamento, and modulation wheel
123 //#define MIDI_ADVANCED
125 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
126 //#define MIDI_TONE_KEYCODE_OCTAVES 1
128 #define WS2812_LED_N 2
129 #define RGBLED_NUM WS2812_LED_N
130 #define WS2812_TIM_N 2
131 #define WS2812_TIM_CH 2
132 #define PORT_WS2812 GPIOA
134 #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
135 //#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
136 //#define WS2812_EXTERNAL_PULLUP