3 ![panc60](https://imgix.ttcdn.co/i/product/original/0/670893-eca4599c4aad489dbe62609ac2fed86e.jpeg?q=100&auto=format%2Ccompress&w=500)
5 The panc60 is a 60% PCB with backlight and rgb underglow.
7 Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Jack Humbert](https://github.com/jackhumbert)
8 Hardware Supported: panc60 PCB
9 Hardware Availability: [PANC Interactive](https://store.panc.co/product/panc60-60-pcb)
11 Make example for this keyboard (after setting up your build environment):
17 **Reset Key:** Hold down the key located at `K40`, commonly programmed as left control while plugging in the keyboard.
19 ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
21 To put the panc60 into reset, hold left control while plugging in.
24 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
25 2. Place your keyboard into reset.
26 3. Press the `Find Device` button and ensure that your keyboard is found.
27 4. Press the `Open .hex File` button and locate the `.hex` file you created.
28 5. Press the `Flash Device` button and wait for the process to complete.
31 1. Install homebrew by typing the following:
33 /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
35 2. Install `crosspack-avr`.
37 brew cask install crosspack-avr
39 3. Install the following packages:
43 brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
45 4. Place your keyboard into reset.
46 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
48 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).