1 # project specific files
2 SRC = keyboards/zeal60/zeal60.c \
3 keyboards/zeal60/rgb_backlight.c \
4 drivers/issi/is31fl3733.c \
6 drivers/arm/i2c_master.c
9 # the next two should match the directories in
10 # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
12 MCU_SERIES = STM32F3xx
14 # Linker script to use
15 # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
17 MCU_LDSCRIPT = STM32F303xC
20 # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
21 MCU_STARTUP = stm32f3xx
23 # Board: it should exist either in <chibios>/os/hal/boards/
24 # or <this_dir>/boards
25 BOARD = GENERIC_STM32_F303XC
30 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
35 # Vector table for application
36 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
37 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
38 # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
41 # Do not put the microcontroller into power saving mode
42 # when we get USB suspend event. We want it to keep updating
44 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
46 # Options to pass to dfu-util when flashing
47 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
48 DFU_SUFFIX_ARGS = -p DF11 -v 0483
51 # comment out to disable the options.
53 BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
54 BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
55 MOUSEKEY_ENABLE = yes # Mouse keys
56 EXTRAKEY_ENABLE = yes # Audio control and System control
57 CONSOLE_ENABLE = no # Console for debug
58 COMMAND_ENABLE = no # Commands for debug and configuration
59 SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
60 NKRO_ENABLE = yes # USB Nkey Rollover
61 AUDIO_ENABLE = no # Audio output on port C6
62 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
63 #SERIAL_LINK_ENABLE = yes
66 DYNAMIC_KEYMAP_ENABLE = no