1 SRC += matrix.c TWIlib.c issi.c lighting.c
10 # Target architecture (see library "Board Types" documentation).
13 # Input clock frequency.
14 # This will define a symbol, F_USB, in all source code files equal to the
15 # input clock frequency (before any prescaling is performed) in Hz. This value may
16 # differ from F_CPU if prescaling is used on the latter, and is required as the
17 # raw input clock is fed directly to the PLL sections of the AVR for high speed
18 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
19 # at the end, this will be done automatically to create a 32-bit value in your
22 # If no clock division is performed on the input clock inside the AVR (via the
23 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
27 # This definition is optional, and if your keyboard supports multiple bootloaders of
28 # different sizes, comment this out, and the correct address will be loaded
29 # automatically (+60). See bootloader.mk for all options.
32 # Interrupt driven control endpoint task(+60)
33 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
36 # Boot Section Size in *bytes*
38 # Teensy++ halfKay 1024
39 # Atmel DFU loader 4096
40 # LUFA bootloader 4096
42 OPT_DEFS += -DBOOTLOADER_SIZE=4096
46 # change yes to no to disable
48 BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
49 MOUSEKEY_ENABLE = no # Mouse keys(+4700)
50 EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
51 CONSOLE_ENABLE = no # Console for debug(+400)
52 COMMAND_ENABLE = no # Commands for debug and configuration
53 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
54 SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
55 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
56 NKRO_ENABLE = no # USB Nkey Rollover
57 MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
58 UNICODE_ENABLE = no # Unicode
59 BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
60 AUDIO_ENABLE = no # Audio output on port C6
61 RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
62 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
63 BACKLIGHT_CUSTOM_DRIVER = yes
64 BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality, also set ISSI_ENABLE below for Miera
65 ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled
69 #ifeq ($(strip $(ISSI_ENABLE)), yes)
70 # TMK_COMMON_DEFS += -DISSI_ENABLE
73 #ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
74 # TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
77 DEFAULT_FOLDER = meira/promicro