1 # project specific files
6 # - the next two should match the directories in
7 # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
11 # Linker script to use
12 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
14 # - NOTE: a custom ld script is needed for EEPROM on Teensy LC
15 MCU_LDSCRIPT = jm60_bootloader
18 # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
19 MCU_STARTUP = stm32f1xx
21 # Board: it should exist either in <chibios>/os/hal/boards/
22 # or <this_dir>/boards
26 # Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
29 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
30 # I.e. 6 for Teensy LC; 7 for Teensy 3.x
33 # Vector table for application
34 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
35 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
36 #OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
40 # comment out to disable the options.
42 BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
43 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
44 MOUSEKEY_ENABLE = no # Mouse keys
45 EXTRAKEY_ENABLE = yes # Audio control and System control
46 CONSOLE_ENABLE = no # Console for debug
47 COMMAND_ENABLE = no # Commands for debug and configuration
48 SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
49 NKRO_ENABLE = yes # USB Nkey Rollover
50 CUSTOM_MATRIX = yes # Custom matrix file
52 VISUALIZER_ENABLE = no
54 #LED_DRIVER = is31fl3731c