2 Copyright 2012 Jun Wako <wakojun@gmail.com>
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include "config_common.h"
23 /* USB Device descriptor parameter */
24 #define VENDOR_ID 0xFEED
25 #define PRODUCT_ID 0xCAFE
26 #define DEVICE_VER 0x0104
27 #define MANUFACTURER q.m.k
28 #define PRODUCT HHKB mod
29 #define DESCRIPTION q.m.k keyboard firmware for HHKB
33 # define MATRIX_ROWS 16
35 # define MATRIX_ROWS 8
39 #define TAPPING_TERM 200
41 /* number of backlight levels */
42 #define BACKLIGHT_LEVELS 3
44 /* Set 0 if debouncing isn't needed */
47 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
48 //#define LOCKING_SUPPORT_ENABLE
49 /* Locking resynchronize hack */
50 //#define LOCKING_RESYNC_ENABLE
52 /* key combination for command */
53 #define IS_COMMAND() ( \
54 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
57 #ifdef HHKB_RN42_ENABLE
58 // rn42 support -- acquired from the tmk repo. This is almost certainly not
59 // integrated with qmk in the correct way.
61 #define SUART_OUT_PORT PORTD
62 #define SUART_OUT_BIT 0
63 #define SUART_IN_PIN PIND
64 #define SUART_IN_BIT 1
66 #ifdef __AVR_ATmega32U4__
67 /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
68 #define UCSR1D _SFR_MEM8(0xCB)
72 #define SERIAL_UART_BAUD 115200
73 #define SERIAL_UART_DATA UDR1
74 #define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
75 #define SERIAL_UART_RXD_VECT USART1_RX_vect
76 #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
77 #define SERIAL_UART_INIT() do { \
78 UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
79 UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \
80 UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
81 UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
82 UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
83 UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \
84 DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \
87 #define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
88 #define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
90 #error "USART configuration is needed."
93 /* power control of key switch board */
94 #define HHKB_POWER_SAVING
99 * Feature disable options
100 * These options are also useful to firmware size reduction.
103 /* disable debug print */
109 /* disable action features */
110 //#define NO_ACTION_LAYER
111 //#define NO_ACTION_TAPPING
112 //#define NO_ACTION_ONESHOT
113 //#define NO_ACTION_MACRO
114 //#define NO_ACTION_FUNCTION