2 Copyright 2012 Jun Wako <wakojun@gmail.com>
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include "config_common.h"
23 /* USB Device descriptor parameter */
24 #define VENDOR_ID 0xFEED
25 #define PRODUCT_ID 0x6060
26 #define DEVICE_VER 0x0001
27 #define MANUFACTURER Bathroom Epiphanies
28 #define PRODUCT frosty_flake
29 #define DESCRIPTION Frosty Flake controller for the CM Storm Quick Fire Rapid
32 * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies
33 * Ported from the Bathroom Epiphanies TMK Firmware:
34 * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers
40 #define MATRIX_COLS 18
43 * Keyboard Matrix Assignments
45 * Change this to how you wired your keyboard
46 * COLS: AVR pins used for columns, left to right
47 * ROWS: AVR pins used for rows, top to bottom
48 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
49 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
52 //#define MATRIX_ROW_PINS { D5, D4, D6, D2, D1, D0 }
53 //#define MATRIX_COL_PINS << n/a >>
54 //#define UNUSED_PINS { B0, C4, D3 }
56 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
57 //#define DIODE_DIRECTION << n/a >>
59 // #define BACKLIGHT_PIN B7
60 // #define BACKLIGHT_BREATHING
61 // #define BACKLIGHT_LEVELS 3
64 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
65 #define DEBOUNCING_DELAY 5
67 /* define if matrix has ghost (lacks anti-ghosting diodes) */
68 //#define MATRIX_HAS_GHOST
70 /* number of backlight levels */
72 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
73 #define LOCKING_SUPPORT_ENABLE
74 /* Locking resynchronize hack */
75 #define LOCKING_RESYNC_ENABLE
80 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
81 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
82 * makefile for this to work.)
84 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
85 * until the next keyboard reset.
87 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
88 * fully operational during normal computer usage.
90 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
91 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
92 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
101 * Magic keys are hotkey commands that allow control over firmware functions of
102 * the keyboard. They are best used in combination with the HID Listen program,
103 * found here: https://www.pjrc.com/teensy/hid_listen.html
105 * The options below allow the magic key functionality to be changed. This is
106 * useful if your keyboard/keypad is missing keys and you want magic key support.
110 /* key combination for magic key command */
111 #define IS_COMMAND() ( \
112 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
115 /* control how magic key switches layers */
116 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
117 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
118 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
120 /* override magic key keymap */
121 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
122 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
123 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
124 //#define MAGIC_KEY_HELP1 H
125 //#define MAGIC_KEY_HELP2 SLASH
126 //#define MAGIC_KEY_DEBUG D
127 //#define MAGIC_KEY_DEBUG_MATRIX X
128 //#define MAGIC_KEY_DEBUG_KBD K
129 //#define MAGIC_KEY_DEBUG_MOUSE M
130 //#define MAGIC_KEY_VERSION V
131 //#define MAGIC_KEY_STATUS S
132 //#define MAGIC_KEY_CONSOLE C
133 //#define MAGIC_KEY_LAYER0_ALT1 ESC
134 //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
135 //#define MAGIC_KEY_LAYER0 0
136 //#define MAGIC_KEY_LAYER1 1
137 //#define MAGIC_KEY_LAYER2 2
138 //#define MAGIC_KEY_LAYER3 3
139 //#define MAGIC_KEY_LAYER4 4
140 //#define MAGIC_KEY_LAYER5 5
141 //#define MAGIC_KEY_LAYER6 6
142 //#define MAGIC_KEY_LAYER7 7
143 //#define MAGIC_KEY_LAYER8 8
144 //#define MAGIC_KEY_LAYER9 9
145 //#define MAGIC_KEY_BOOTLOADER PAUSE
146 //#define MAGIC_KEY_LOCK CAPS
147 //#define MAGIC_KEY_EEPROM E
148 //#define MAGIC_KEY_NKRO N
149 //#define MAGIC_KEY_SLEEP_LED Z
152 * Feature disable options
153 * These options are also useful to firmware size reduction.
156 /* disable debug print */
162 /* disable action features */
163 //#define NO_ACTION_LAYER
164 //#define NO_ACTION_TAPPING
165 //#define NO_ACTION_ONESHOT
166 //#define NO_ACTION_MACRO
167 //#define NO_ACTION_FUNCTION