4 #include "config_common.h"
6 /* USB Device descriptor parameter */
7 #define VENDOR_ID 0x1209
8 #define PRODUCT_ID 0x2328
9 #define DEVICE_VER 0x501
10 #define MANUFACTURER K.T.E.C.
12 #define DESCRIPTION qmk port for Daisy
16 #define MATRIX_COLS 11
19 * Keyboard Matrix Assignments
21 * Change this to how you wired your keyboard
22 * COLS: AVR pins used for columns, left to right
23 * ROWS: AVR pins used for rows, top to bottom
24 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
25 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
28 #define MATRIX_ROW_PINS { D2, D3, D5, B7 }
29 #define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 }
32 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
33 #define DIODE_DIRECTION COL2ROW
35 #define BACKLIGHT_PIN D0
36 #define BACKLIGHT_LEVELS 6
39 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
40 #define DEBOUNCING_DELAY 5
42 /* define if matrix has ghost (lacks anti-ghosting diodes) */
43 //#define MATRIX_HAS_GHOST
45 /* number of backlight levels */
47 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
48 #define LOCKING_SUPPORT_ENABLE
49 /* Locking resynchronize hack */
50 #define LOCKING_RESYNC_ENABLE
55 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
56 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
57 * makefile for this to work.)
59 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
60 * until the next keyboard reset.
62 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
63 * fully operational during normal computer usage.
65 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
66 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
67 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
76 * Magic keys are hotkey commands that allow control over firmware functions of
77 * the keyboard. They are best used in combination with the HID Listen program,
78 * found here: https://www.pjrc.com/teensy/hid_listen.html
80 * The options below allow the magic key functionality to be changed. This is
81 * useful if your keyboard/keypad is missing keys and you want magic key support.
85 /* key combination for magic key command */
86 #define IS_COMMAND() ( \
87 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
90 /* control how magic key switches layers */
91 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
92 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
93 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
95 /* override magic key keymap */
96 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
97 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
98 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
99 //#define MAGIC_KEY_HELP1 H
100 //#define MAGIC_KEY_HELP2 SLASH
101 //#define MAGIC_KEY_DEBUG D
102 //#define MAGIC_KEY_DEBUG_MATRIX X
103 //#define MAGIC_KEY_DEBUG_KBD K
104 //#define MAGIC_KEY_DEBUG_MOUSE M
105 //#define MAGIC_KEY_VERSION V
106 //#define MAGIC_KEY_STATUS S
107 //#define MAGIC_KEY_CONSOLE C
108 //#define MAGIC_KEY_LAYER0_ALT1 ESC
109 //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
110 //#define MAGIC_KEY_LAYER0 0
111 //#define MAGIC_KEY_LAYER1 1
112 //#define MAGIC_KEY_LAYER2 2
113 //#define MAGIC_KEY_LAYER3 3
114 //#define MAGIC_KEY_LAYER4 4
115 //#define MAGIC_KEY_LAYER5 5
116 //#define MAGIC_KEY_LAYER6 6
117 //#define MAGIC_KEY_LAYER7 7
118 //#define MAGIC_KEY_LAYER8 8
119 //#define MAGIC_KEY_LAYER9 9
120 //#define MAGIC_KEY_BOOTLOADER PAUSE
121 //#define MAGIC_KEY_LOCK CAPS
122 //#define MAGIC_KEY_EEPROM E
123 //#define MAGIC_KEY_NKRO N
124 //#define MAGIC_KEY_SLEEP_LED Z
127 * Feature disable options
128 * These options are also useful to firmware size reduction.
131 /* disable debug print */
137 /* disable action features */
138 //#define NO_ACTION_LAYER
139 //#define NO_ACTION_TAPPING
140 //#define NO_ACTION_ONESHOT
141 //#define NO_ACTION_MACRO
142 //#define NO_ACTION_FUNCTION
145 #define RGB_DI_PIN C7 // pin the DI on the ws2812 is hooked-up to
146 #define RGBLIGHT_ANIMATIONS // run RGB animations
147 #define RGBLED_NUM 8 // number of LEDs
148 #define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
149 #define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
150 #define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
156 /* Prevent use of disabled MIDI features in the keymap */
157 //#define MIDI_ENABLE_STRICT 1
159 /* enable basic MIDI features:
160 - MIDI notes can be sent when in Music mode is on
164 /* enable advanced MIDI features:
165 - MIDI notes can be added to the keymap
166 - Octave shift and transpose
167 - Virtual sustain, portamento, and modulation wheel
170 //#define MIDI_ADVANCED
172 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
173 //#define MIDI_TONE_KEYCODE_OCTAVES 1