keyboards/crkbd/keymaps/drashna/keymap.c

   1 #include QMK_KEYBOARD_H
   2 #include "drashna.h"
   3 #ifdef PROTOCOL_LUFA
   4   #include "lufa.h"
   5   #include "split_util.h"
   6 #endif
   7 #ifdef SSD1306OLED
   8   #include "ssd1306.h"
   9 #endif
  10
  11 extern keymap_config_t keymap_config;
  12 extern uint8_t is_master;
  13
  14 #ifdef RGBLIGHT_ENABLE
  15 //Following line allows macro to read current RGB settings
  16 extern rgblight_config_t rgblight_config;
  17 #endif
  18
  19 enum crkbd_keycodes {
  20   RGBRST = NEW_SAFE_RANGE
  21 };
  22
  23 #define LAYOUT_crkbd_base( \
  24     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
  25     K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
  26     K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
  27   ) \
  28   LAYOUT_wrapper( \
  29     KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_BSPC, \
  30     KC_TAB,  K11,    K12,     K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A,     KC_QUOT, \
  31     KC_MLSF, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29,  CTL_T(K2A), KC_MRSF, \
  32                            LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE                                    \
  33   )
  34 #define LAYOUT_crkbd_base_wrapper(...)       LAYOUT_crkbd_base(__VA_ARGS__)
  35
  36 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  37   [_QWERTY] = LAYOUT_crkbd_base_wrapper(
  38     _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
  39     _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
  40     _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
  41   ),
  42
  43   [_COLEMAK] = LAYOUT_crkbd_base_wrapper(
  44     _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
  45     _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
  46     _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
  47   ),
  48
  49   [_DVORAK] = LAYOUT_crkbd_base_wrapper(
  50     _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
  51     _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
  52     _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
  53   ),
  54
  55   [_WORKMAN] = LAYOUT_crkbd_base_wrapper(
  56     _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
  57     _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
  58     _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
  59   ),
  60
  61   [_MODS] = LAYOUT_wrapper(
  62       _______, ___________________BLANK___________________,                  ___________________BLANK___________________, _______,
  63       _______, ___________________BLANK___________________,                  ___________________BLANK___________________, _______,
  64       KC_LSFT, ___________________BLANK___________________,                  ___________________BLANK___________________, KC_RSFT,
  65                                      _______, _______, _______,        _______, _______, _______
  66   ),
  67
  68   [_LOWER] = LAYOUT_wrapper(
  69     KC_TILD, _________________LOWER_L1__________________,                    _________________LOWER_R1__________________, KC_BSPC,
  70     KC_F11,  _________________LOWER_L2__________________,                    _________________LOWER_R2__________________, KC_PIPE,
  71     KC_F12,  _________________LOWER_L3__________________,                    _________________LOWER_R3__________________, _______,
  72                                      _______, _______, _______,        _______, _______, _______
  73   ),
  74
  75   [_RAISE] = LAYOUT_wrapper( \
  76     KC_GRV,  _________________RAISE_L1__________________,                    _________________RAISE_R1__________________, KC_BSPC,
  77     _______, _________________RAISE_L2__________________,                    _________________RAISE_R2__________________, KC_BSLS,
  78     _______, _________________RAISE_L3__________________,                    _________________RAISE_R3__________________, _______,
  79                                      _______, _______, _______,        _______, _______, _______
  80   ),
  81
  82   [_ADJUST] = LAYOUT_wrapper( \
  83     KC_MAKE, _________________ADJUST_L1_________________,                    _________________ADJUST_R1_________________, KC_RESET,
  84     VRSN,    _________________ADJUST_L2_________________,                    _________________ADJUST_R2_________________, EPRM,
  85     TG_MODS, _________________ADJUST_L3_________________,                    _________________ADJUST_R3_________________, KC_MPLY,
  86                                      _______, _______, _______,        _______, _______, _______
  87   )
  88 };
  89
  90 int RGB_current_mode;
  91
  92 void matrix_init_keymap(void) {
  93     #ifdef RGBLIGHT_ENABLE
  94       RGB_current_mode = rgblight_config.mode;
  95     #endif
  96     //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
  97     #ifdef SSD1306OLED
  98         iota_gfx_init(!has_usb());   // turns on the display
  99     #endif
 100
 101   DDRD &= ~(1<<5);
 102   PORTD &= ~(1<<5);
 103
 104   DDRB &= ~(1<<0);
 105   PORTB &= ~(1<<0);}
 106
 107 //SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
 108 #ifdef SSD1306OLED
 109
 110 // When add source files to SRC in rules.mk, you can use functions.
 111 const char *read_layer_state(void);
 112 const char *read_logo(void);
 113 void set_keylog(uint16_t keycode, keyrecord_t *record);
 114 const char *read_keylog(void);
 115 const char *read_keylogs(void);
 116 char layer_state_str[24];
 117 // const char *read_mode_icon(bool swap);
 118 const char *read_host_led_state(void);
 119 // void set_timelog(void);
 120 // const char *read_timelog(void);
 121
 122
 123 const char* read_layer_state(void) {
 124   switch (layer_state) {
 125     case _QWERTY:
 126       switch (default_layer_state) {
 127         case _QWERTY:
 128           snprintf(layer_state_str, sizeof(layer_state_str), "Layer: QWERTY");
 129           break;
 130         case _COLEMAK:
 131           snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Colemak");
 132           break;
 133         case _DVORAK:
 134           snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Dvorak");
 135           break;
 136         case _WORKMAN:
 137           snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Workman");
 138           break;
 139       }
 140       break;
 141     case _RAISE:
 142       snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise");
 143       break;
 144     case _LOWER:
 145       snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower");
 146       break;
 147     case _ADJUST:
 148       snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust");
 149       break;
 150     default:
 151       snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state);
 152   }
 153
 154     return layer_state_str;
 155 }
 156
 157 void matrix_scan_keymap(void) {
 158    iota_gfx_task();
 159 }
 160
 161 void matrix_render_user(struct CharacterMatrix *matrix) {
 162   if (is_master) {
 163     // If you want to change the display of OLED, you need to change here
 164     matrix_write_ln(matrix, read_layer_state());
 165     matrix_write_ln(matrix, read_keylog());
 166     matrix_write_ln(matrix, read_keylogs());
 167     //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
 168     matrix_write_ln(matrix, read_host_led_state());
 169     //matrix_write_ln(matrix, read_timelog());
 170   } else {
 171     matrix_write(matrix, read_logo());
 172   }
 173 }
 174
 175 void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
 176   if (memcmp(dest->display, source->display, sizeof(dest->display))) {
 177     memcpy(dest->display, source->display, sizeof(dest->display));
 178     dest->dirty = true;
 179   }
 180 }
 181
 182 void iota_gfx_task_user(void) {
 183   struct CharacterMatrix matrix;
 184   matrix_clear(&matrix);
 185   matrix_render_user(&matrix);
 186   matrix_update(&display, &matrix);
 187 }
 188
 189 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
 190   if (record->event.pressed) {
 191     set_keylog(keycode, record);
 192     // set_timelog();
 193   }
 194   return true;
 195 }
 196
 197 #endif