2 Copyright 2012 Jun Wako <wakojun@gmail.com>
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
20 #include "config_common.h"
22 /* USB Device descriptor parameter */
23 #define VENDOR_ID 0xCEEB
24 #define PRODUCT_ID 0x0510
25 #define DEVICE_VER 0x0101
26 #define MANUFACTURER di0ib
28 #define DESCRIPTION Magicforce 68 with programmable PCB replacement
35 * Keyboard Matrix Assignments
37 * Change this to how you wired your keyboard
38 * COLS: AVR pins used for columns, left to right
39 * ROWS: AVR pins used for rows, top to bottom
40 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
41 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
44 #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
45 #define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4 }
48 /* COL2ROW or ROW2COL */
49 #define DIODE_DIRECTION COL2ROW
51 #define BACKLIGHT_PIN B5
52 #define BACKLIGHT_BREATHING
53 #define BACKLIGHT_LEVELS 3
55 // #define RGB_DI_PIN E2
57 // #define RGBLED_NUM 16
58 // #define RGBLIGHT_HUE_STEP 8
59 // #define RGBLIGHT_SAT_STEP 8
60 // #define RGBLIGHT_VAL_STEP 8
61 // #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
62 // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
63 // /*== all animations enable ==*/
64 // #define RGBLIGHT_ANIMATIONS
65 // /*== or choose animations ==*/
66 // #define RGBLIGHT_EFFECT_BREATHING
67 // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
68 // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
69 // #define RGBLIGHT_EFFECT_SNAKE
70 // #define RGBLIGHT_EFFECT_KNIGHT
71 // #define RGBLIGHT_EFFECT_CHRISTMAS
72 // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
73 // #define RGBLIGHT_EFFECT_RGB_TEST
74 // #define RGBLIGHT_EFFECT_ALTERNATING
77 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
80 /* define if matrix has ghost (lacks anti-ghosting diodes) */
81 //#define MATRIX_HAS_GHOST
83 /* number of backlight levels */
85 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
86 #define LOCKING_SUPPORT_ENABLE
87 /* Locking resynchronize hack */
88 #define LOCKING_RESYNC_ENABLE
93 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
94 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
95 * makefile for this to work.)
97 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
98 * until the next keyboard reset.
100 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
101 * fully operational during normal computer usage.
103 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
104 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
105 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
114 * Magic keys are hotkey commands that allow control over firmware functions of
115 * the keyboard. They are best used in combination with the HID Listen program,
116 * found here: https://www.pjrc.com/teensy/hid_listen.html
118 * The options below allow the magic key functionality to be changed. This is
119 * useful if your keyboard/keypad is missing keys and you want magic key support.
123 /* control how magic key switches layers */
124 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
125 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
126 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
128 /* override magic key keymap */
129 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
130 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
131 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
132 //#define MAGIC_KEY_HELP1 H
133 //#define MAGIC_KEY_HELP2 SLASH
134 //#define MAGIC_KEY_DEBUG D
135 //#define MAGIC_KEY_DEBUG_MATRIX X
136 //#define MAGIC_KEY_DEBUG_KBD K
137 //#define MAGIC_KEY_DEBUG_MOUSE M
138 //#define MAGIC_KEY_VERSION V
139 //#define MAGIC_KEY_STATUS S
140 //#define MAGIC_KEY_CONSOLE C
141 //#define MAGIC_KEY_LAYER0_ALT1 ESC
142 //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
143 //#define MAGIC_KEY_LAYER0 0
144 //#define MAGIC_KEY_LAYER1 1
145 //#define MAGIC_KEY_LAYER2 2
146 //#define MAGIC_KEY_LAYER3 3
147 //#define MAGIC_KEY_LAYER4 4
148 //#define MAGIC_KEY_LAYER5 5
149 //#define MAGIC_KEY_LAYER6 6
150 //#define MAGIC_KEY_LAYER7 7
151 //#define MAGIC_KEY_LAYER8 8
152 //#define MAGIC_KEY_LAYER9 9
153 //#define MAGIC_KEY_BOOTLOADER PAUSE
154 //#define MAGIC_KEY_LOCK CAPS
155 //#define MAGIC_KEY_EEPROM E
156 //#define MAGIC_KEY_NKRO N
157 //#define MAGIC_KEY_SLEEP_LED Z
160 * Feature disable options
161 * These options are also useful to firmware size reduction.
164 /* disable debug print */
170 /* disable action features */
171 //#define NO_ACTION_LAYER
172 //#define NO_ACTION_TAPPING
173 //#define NO_ACTION_ONESHOT
174 //#define NO_ACTION_MACRO
175 //#define NO_ACTION_FUNCTION