6 # Target file name (without extension).
9 # Directory common source filess exist
12 # Directory keyboard dependent files exist
15 # keyboard dependent files
21 CONFIG_H = config_iwrap.h
24 # V-USB debug level: To use ps2_usart.c level must be 0
25 # ps2_usart.c requires USART to receive PS/2 signal.
26 OPT_DEFS = -DDEBUG_LEVEL=0
29 # MCU name, you MUST set this to match the board you are using
30 # type "make clean" after changing this, so all files will be rebuilt
32 # avrdude doesn't know atmega168p
36 # Processor frequency.
37 # Normally the first thing your program should do is set the clock prescaler,
38 # so your program will run at the correct speed. You should also set this
39 # variable to same clock speed. The _delay_ms() macro uses this, and many
40 # examples use this variable to calculate timings. Do not add a "UL" here.
45 # comment out to disable the options.
47 MOUSEKEY_ENABLE = yes # Mouse keys
48 EXTRAKEY_ENABLE = yes # Audio control and System control
49 #NKRO_ENABLE = yes # USB Nkey Rollover
52 # Boot Section Size in *BYTEs*
54 # Teensy++ halfKay 1024
55 # Atmel DFU loader 4096
56 # LUFA bootloader 4096
58 OPT_DEFS += -DBOOT_SIZE=2048
62 #---------------- Programming Options --------------------------
64 # Type: avrdude -c ? to get a full listing.
65 AVRDUDE_PROGRAMMER = usbasp
67 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
68 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
70 # Uncomment the following if you want avrdude's erase cycle counter.
71 # Note that this counter needs to be initialized first using -Yn,
73 #AVRDUDE_ERASE_COUNTER = -y
75 # Uncomment the following if you do /not/ wish a verification to be
76 # performed after programming the device.
77 #AVRDUDE_NO_VERIFY = -V
79 # Increase verbosity level. Please use this when submitting bug
80 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
81 # to submit bug reports.
82 #AVRDUDE_VERBOSE = -v -v
84 #AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
85 AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
86 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
87 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
88 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
90 PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
98 #include $(TOP_DIR)/protocol/iwrap.mk
99 # To be swatchable btween Bluetooth and USB. Comment out if you don't need USB.
100 include $(TOP_DIR)/protocol/vusb.mk
101 #include $(TOP_DIR)/protocol.mk
102 include $(TOP_DIR)/common.mk
103 include $(TOP_DIR)/rules.mk