1 %% Do not edit this file; it is auto-generated from LSR http://lsr.dsi.unimi.it
2 %% This file is in the public domain.
9 Son posibles tanto los corchetes rectos sobre notas sueltas como
10 extremos de barra sueltos en figuras unidas, con una combinación de
11 @code{stemLeftBeamCount}, @code{stemRightBeamCount} e indicadores de
12 barra @code{[ ]} emparejados.
17 Para corchetes rectos que apunten a la derecha sobre notas sueltas,
18 use indicadores de barra emparejados @code{[ ]} y establezca
19 @code{stemLeftBeamCount} a cero (véase el ejemplo 1).
24 Para corchetes rectos que apunten a la izquierda, establezca en su
25 lugar @code{stemRightBeamCount} (ejemplo 2).
30 Para extremos sueltos que apunten a la derecha al final de un conjunto
31 de notas unidas, establezca @code{stemRightBeamCount} a un valor
32 positivo. Y para extremos sueltos que apunten a la izquierda al
33 principio de un conjunto de notas unidas, establezca
34 @code{stemLeftBeamCount} en su lugar (ejemplo 3).
39 A veces, para una nota suelta rodeada de silencios tiene sentido que
40 lleve los dos extremos sueltos del corchete plano, apuntando a derecha
41 e izquierda. Hágalo solamente con indicadores de barra emparejados
42 @code{[ ]} (ejemplo 4).
47 (Observe que @code{\\set stemLeftBeamCount} siempre equivale a
48 @code{\\once \\set}. En otras palabras, los ajustes de la cantidad de
49 barras no se recuerdan, y por ello el par de corchetes planos
50 aplicados a la nota Do semicorchea @code{c'16 [ ]} del último ejemplo
51 no tiene nada que ver con el @code{\\set} de dos notas por detrás.)
57 doctitlees = "Corchetes rectos y extremos de barra sueltos"
60 Flat flags on lone notes and beam nibs at the ends of beamed figures
61 are both possible with a combination of @code{stemLeftBeamCount},
62 @code{stemRightBeamCount} and paired @code{[ ]} beam indicators.
67 For right-pointing flat flags on lone notes, use paired @code{[ ]} beam
68 indicators and set @code{stemLeftBeamCount} to zero (see Example 1).
73 For left-pointing flat flags, set @code{stemRightBeamCount} instead
79 For right-pointing nibs at the end of a run of beamed notes, set
80 @code{stemRightBeamCount} to a positive value. And for left-pointing
81 nibs at the start of a run of beamed notes, set
82 @code{stemLeftBeamCount} instead (Example 3).
87 Sometimes it may make sense for a lone note surrounded by rests to
88 carry both a left- and right-pointing flat flag. Do this with paired
89 @code{[ ]} beam indicators alone (Example 4).
94 (Note that @code{\\set stemLeftBeamCount}is always equivalent to
95 @code{\\once \\set}. In other words, the beam count settings aren't
96 \"sticky\", so the pair of flat flags attached to the lone @code{c'16
97 [ ]} in the last example have nothing to do with the @code{\\set} two
104 doctitle = "Flat flags and beam nibs"
111 \set stemLeftBeamCount = #0
119 \set stemRightBeamCount = #0
127 \set stemRightBeamCount = #2
131 \set stemLeftBeamCount = #2
141 \set stemRightBeamCount = #2
146 \set stemLeftBeamCount = #2