5 dh_install - install files into package build directories
11 use Debian::Debhelper::Dh_Lib;
15 B<dh_install> [B<-X>I<item>] [B<--autodest>] [B<--sourcedir=>I<dir>] [S<I<debhelper options>>] [S<I<file [...] dest>>]
19 dh_install is a debhelper program that handles installing files into package
20 build directories. There are many dh_install* commands that handle installing
21 specific types of files such as documentation, examples, man pages, and so on,
22 and they should be used when possible as they often have extra intelligence for
23 those particular tasks. dh_install, then, is useful for installing everything
24 else, for which no particular intelligence is needed. It is a replacement for
25 the old dh_movefiles command.
27 Files named debian/package.install list the files to install into each
28 package and the directory they should be installed to. The format is a set
29 of lines, where each line lists a file or files to install, and at the end
30 of the line tells the directory it should be installed in. The name of the
31 files (or directories) to install should be given relative to the current
32 directory, while the installation directory is given relative to the
33 package build directory. You may use wildcards in the names of the files to
34 install (in v3 mode and above).
36 This program may be used in one of two ways. If you just have a file or two
37 that the upstream Makefile does not install for you, you can run dh_install
38 on them to move them into place. On the other hand, maybe you have a large
39 package that builds multiple binary packages. You can use the upstream
40 Makefile to install it all into debian/tmp, and then use dh_install to copy
41 directories and files from there into the proper package build directories.
43 From debhelper compatibility level 7 on, dh_install will fall back to
44 looking in debian/tmp for files, if it doesn't find them in the current
45 directory (or whereever you've told it to look using --sourcedir).
51 =item B<--list-missing>
53 This option makes dh_install keep track of the files it installs, and then at
54 the end, compare that list with the files in the source directory. If any of
55 the files (and symlinks) in the source directory were not installed to
56 somewhere, it will warn on stderr about that.
58 This may be useful if you have a large package and want to make sure that
59 you don't miss installing newly added files in new upstream releases.
61 Note that files that are excluded from being moved via the -X option are not
64 =item B<--fail-missing>
66 This option is like --list-missing, except if a file was missed, it will
67 not only list the missing files, but also fail with a nonzero exit code.
69 =item B<-Xitem>, B<--exclude=item>
71 Exclude files that contain "item" anywhere in their filename from
74 =item B<--sourcedir=dir>
76 Look in the specified directory for files to be installed.
78 Note that this is not the same as the --sourcedirectory option used
79 by the dh_auto_* commands. You rarely need to use this option, since
80 dh_install automatically looks for files in debian/tmp in debhelper
81 compatibility level 7 and above.
85 Guess as the destination directory to install things to. If this is
86 specified, you should not list destination directories in
87 debian/package.install files or on the command line. Instead, dh_install
88 will guess as follows:
90 Strip off debian/tmp (or the sourcedir if one is given) from the front of
91 the filename, if it is present, and install into the dirname of the
92 filename. So if the filename is debian/tmp/usr/bin, then that directory
93 will be copied to debian/package/usr/. If the filename is
94 debian/tmp/etc/passwd, it will be copied to debian/package/etc/.
96 Note that if you list exactly one filename or wildcard-pattern on a line by
98 debian/package.install file, with no explicit destination, then dh_install
99 will automatically guess the destination even if this flag is not set.
101 =item I<file [...] dest>
103 Lists files (or directories) to install and where to install them to.
104 The files will be installed into the first package dh_install acts on.
111 "autodest" => \$dh{AUTODEST},
112 "list-missing" => \$dh{LIST_MISSING},
113 "fail-missing" => \$dh{FAIL_MISSING},
114 "sourcedir=s" => \$dh{SOURCEDIR},
120 $srcdir = $dh{SOURCEDIR}."/" if defined $dh{SOURCEDIR};
122 foreach my $package (@{$dh{DOPACKAGES}}) {
123 my $tmp=tmpdir($package);
124 my $file=pkgfile($package,"install");
128 @install=filedoublearray($file); # no globbing yet
131 if (($package eq $dh{FIRSTPACKAGE} || $dh{PARAMS_ALL}) && @ARGV) {
132 push @install, [@ARGV];
135 # Support for -X flag.
137 if ($dh{EXCLUDE_FIND}) {
138 $exclude = '! \( '.$dh{EXCLUDE_FIND}.' \)';
141 foreach my $set (@install) {
145 if (! defined $dh{AUTODEST} && @$set > 1) {
150 foreach my $glob (@$set) {
151 my @found = glob "$srcdir/$glob";
153 # Fall back to looking in debian/tmp.
154 if (! @found || ! -e $found[0]) {
155 @found = glob "debian/tmp/$glob";
158 push @filelist, @found;
161 if (! compat(4)) { # check added in v5
162 # glob now, relative to srcdir
164 error("$package missing files (@$set), aborting");
167 foreach my $src (@filelist) {
168 next if excludefile($src);
170 if (! defined $dest) {
171 # Guess at destination directory.
175 $strip = "debian/tmp";
177 $dest=~s/^(.*\/)?\Q$strip\E//;
178 $dest=dirname($dest);
182 # Make sure the destination directory exists.
183 if (! -e "$tmp/$dest") {
184 doit("install","-d","$tmp/$dest");
187 # Keep track of what's installed.
188 if ($dh{LIST_MISSING} || $dh{FAIL_MISSING}) {
189 # Kill any extra slashes. Makes the
190 # @installed stuff more robust.
194 push @installed, "\Q$src\E\/.*|\Q$src\E";
197 if (-d $src && $exclude) {
198 my $basename = basename($src);
199 my $dir = ($basename eq '.') ? $src : "$src/..";
202 complex_doit("cd '$dir' && find '$basename' $exclude \\( -type f -or -type l \\) -exec cp --parents -dp {} $pwd/$tmp/$dest/ \\;");
203 # cp is annoying so I need a separate pass
204 # just for empty directories
205 complex_doit("cd '$dir' && find '$basename' $exclude \\( -type d -and -empty \\) -exec cp --parents -a {} $pwd/$tmp/$dest/ \\;");
208 doit("cp", "-a", $src, "$tmp/$dest/");
218 if ($dh{LIST_MISSING} || $dh{FAIL_MISSING}) {
219 # . as srcdir makes no sense, so this is a special case.
220 if ($srcdir eq '.') {
221 $srcdir='debian/tmp';
225 my $installed=join("|", @installed);
226 $installed=qr{^($installed)$};
229 $_="$File::Find::dir/$_";
230 if (! /$installed/ && ! excludefile($_)) {
232 $file=~s/^\Q$srcdir\E\///;
233 push @missing, $file;
237 warning "$_ exists in $srcdir but is not installed to anywhere" foreach @missing;
238 if ($dh{FAIL_MISSING}) {
239 error("missing files, aborting");
246 Suppose your package's upstream Makefile installs a binary, a man page, and
247 a library into appropriate subdirectories of debian/tmp. You want to put
248 the library into package libfoo, and the rest into package foo. Your rules
249 file will run "dh_install --sourcedir=debian/tmp". Make debian/foo.install
255 While debian/libfoo.install contains:
259 If you want a libfoo-dev package too, debian/libfoo-dev.install might contain:
267 dh_install cannot rename files or directories, it can only install them
268 with the names they already have into wherever you want in the package
275 This program is a part of debhelper.
279 Joey Hess <joeyh@debian.org>