11 %define use_pm_utils 0
20 Summary: Automatically select a display configuration based on connected devices
23 Release: %{release}%{?dist}
24 Source0: https://github.com/phillipberndt/%{name}/archive/%{version}/%{name}-%{version}.tar.gz
26 Group: Development/Libraries
27 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
30 Vendor: Phillip Berndt <phillip.berndt@googlemail.com>
31 Url: https://github.com/phillipberndt/autorandr
32 Requires: python%{py_ver}
37 BuildRequires: bash-completion
38 BuildRequires: python%{py_ver}-devel
39 BuildRequires: systemd
42 BuildRequires: python3-devel
49 Automatically select a display configuration based on connected devices
53 This is a compatible Python rewrite of
54 [wertarbyte/autorandr](https://github.com/wertarbyte/autorandr). Contributions
55 for bash-completion, fd.o/XDG autostart, Nitrogen, pm-utils, and systemd can be
56 found under [contrib](contrib/).
58 The original [wertarbyte/autorandr](https://github.com/wertarbyte/autorandr)
59 tree is unmaintained, with lots of open pull requests and issues. I forked it
60 and merged what I thought were the most important changes. If you are searching
61 for that version, see the [`legacy` branch](https://github.com/phillipberndt/autorandr/tree/legacy).
62 Note that the Python version is better suited for non-standard configurations,
63 like if you use `--transform` or `--reflect`. If you use `auto-disper`, you
64 have to use the bash version, as there is no disper support in the Python
65 version (yet). Both versions use a compatible configuration file format, so
66 you can, to some extent, switch between them. I will maintain the `legacy`
67 branch until @wertarbyte finds the time to maintain his branch again.
69 If you are interested in why there are two versions around, see
70 [#7](https://github.com/phillipberndt/autorandr/issues/7),
71 [#8](https://github.com/phillipberndt/autorandr/issues/8) and
73 [#12](https://github.com/phillipberndt/autorandr/issues/12)
74 if you are unhappy with this version and would like to contribute to the bash
77 ## License information and authors
79 autorandr is available under the terms of the GNU General Public License
82 Contributors to this version of autorandr are:
90 * Christophe-Marie Duquesne
97 * Rasmus Wriedt Larsen
108 ## Installation/removal
110 You can use the `autorandr.py` script as a stand-alone binary. If you'd like to
111 install it as a system-wide application, there is a Makefile included that also
112 places some configuration files in appropriate directories such that autorandr
113 is invoked automatically when a monitor is connected or removed, the system
114 wakes up from suspend, or a user logs into an X11 session. Run `make install`
115 as root to install it.
117 If you prefer to have a system wide install managed by your package manager,
120 * Use the [official Arch package](https://www.archlinux.org/packages/community/any/autorandr/).
121 * Use the [official Debian package](https://packages.debian.org/sid/x11/autorandr) on sid
122 * Use the [ebuild from zugaina](https://gpo.zugaina.org/x11-misc/autorandr) on Gentoo.
124 [nix package](https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/autorandr.nix)
126 * Use the automated nightlies generated by the
127 [openSUSE build service](https://build.opensuse.org/package/show/home:phillipberndt/autorandr)
128 for various distributions (RPM and DEB based).
129 * Use the [X binary package system](https://wiki.voidlinux.eu/XBPS)' on Void Linux
130 * Build a .deb-file from the source tree using `make deb`.
131 * Build a .rpm-file from the source tree using `make rpm`.
133 We appreciate packaging scripts for other distributions, please file a pull
134 request if you write one.
136 If you prefer `pip` over your package manager, you can install autorandr with:
138 sudo pip install "git+http://github.com/phillipberndt/autorandr#egg=autorandr"
142 sudo pip install autorandr
144 if you prefer to use a stable version.
148 Save your current display configuration and setup with:
150 autorandr --save mobile
152 Connect an additional display, configure your setup and save it:
154 autorandr --save docked
156 Now autorandr can detect which hardware setup is active:
162 To automatically reload your setup:
166 To manually load a profile:
168 $ autorandr --load <profile>
172 $ autorandr <profile>
174 autorandr tries to avoid reloading an identical configuration. To force the
177 $ autorandr --load <profile> --force
179 To prevent a profile from being loaded, place a script call _block_ in its
180 directory. The script is evaluated before the screen setup is inspected, and
181 in case of it returning a value of 0 the profile is skipped. This can be used
182 to query the status of a docking station you are about to leave.
184 If no suitable profile can be identified, the current configuration is kept.
185 To change this behaviour and switch to a fallback configuration, specify
186 `--default <profile>`. The system-wide installation of autorandr by default
187 calls autorandr with a parameter `--default default`. There are three special,
188 virtual configurations called `horizontal`, `vertical` and `common`. They
189 automatically generate a configuration that incorporates all screens
190 connected to the computer. You can symlink `default` to one of these
191 names in your configuration directory to have autorandr use any of them
192 as the default configuration without you having to change the system-wide
195 You can store default values for any option in an INI-file in
196 `~/.config/autorandr/settings.ini` in a section `config`. The most useful
197 candidate for doing that is `skip-options`, if you need it.
203 Three more scripts can be placed in the configuration directory
204 (as defined by the [XDG spec](https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html),
205 usually `~/.config/autorandr` or `~/.autorandr` if you have an old installation
206 for user configuration and `/etc/xdg/autorandr` for system wide configuration):
208 - `postswitch` is executed *after* a mode switch has taken place. This can be
209 used to notify window managers or other applications about the switch.
210 - `preswitch` is executed *before* a mode switch takes place.
211 - `postsave` is executed after a profile was stored or altered.
212 - `predetect` is executed before autorandr attempts to run xrandr.
214 These scripts must be executable and can be placed directly in the configuration
215 directory, where they will always be executed, or in the profile subdirectories,
216 where they will only be executed on changes regarding that specific profile.
218 Instead (or in addition) to these scripts, you can also place as many executable
219 files as you like in subdirectories called `script_name.d` (e.g. `postswitch.d`).
221 If a script with the same name occurs multiple times, user configuration
222 takes precedence over system configuration (as specified by the
223 [XDG spec](https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html))
224 and profile configuration over general configuration.
226 As a concrete example, suppose you have the files
228 - `/etc/xdg/autorandr/postswitch`
229 - `~/.config/autorandr/postswitch`
230 - `~/.config/autorandr/postswitch.d/notify-herbstluftwm`
231 - `~/.config/autorandr/docked/postswitch`
233 and switch from `mobile` to `docked`. Then
234 `~/.config/autorandr/docked/postswitch` is executed, since the profile specific
235 configuration takes precedence, and
236 `~/.config/autorandr/postswitch.d/notify-herbstluftwm` is executed, since
237 it has a unique name.
239 If you switch back from `docked` to `mobile`, `~/.config/autorandr/postswitch`
240 is executed instead of the `docked` specific `postswitch`.
242 In these scripts, some of autorandr's state is exposed as environment variables
243 prefixed with `AUTORANDR_`, such as:
244 - `AUTORANDR_CURRENT_PROFILE`
245 - `AUTORANDR_CURRENT_PROFILES`
246 - `AUTORANDR_PROFILE_FOLDER`
247 - `AUTORANDR_MONITORS`
249 If you experience issues with xrandr being executed too early after connecting
250 a new monitor, then you can use a `predetect` script to delay the execution.
251 Write e.g. `sleep 1` into that file to make autorandr wait a second before
254 ### Wildcard EDID matching
256 The EDID strings in the `~/.config/autorandr/*/setup` files may contain an
257 asterisk to enable wildcard matching: Such EDIDs are matched against connected
258 monitors using the usual file name globbing rules. This can be used to create
259 profiles matching multiple (or any) monitors.
264 * *2020-05-04* Revert making the launcher the default (fixes #195)
267 * *2020-04-23* Fix hook script execution order to match description from readme
268 * *2020-04-11* Handle negative gamma values (fixes #188)
269 * *2020-04-11* Sort approximate matches in detected profiles by quality of match
270 * *2020-01-31* Handle non-ASCII environment variables (fixes #180)
271 * *2019-12-31* Fix output positioning if the top-left output is not the first
272 * *2019-12-31* Accept negative gamma values (and interpret them as 0)
273 * *2019-12-31* Prefer the X11 launcher over systemd/udev configuration
277 * *2019-11-10* Count closed lids as disconnected outputs
278 * *2019-10-05* Do not overwrite existing configurations without `--force`
279 * *2019-08-16* Accept modes that don't match the WWWxHHH pattern
280 * *2019-03-22* Improve bash autocompletion
281 * *2019-03-21* Store CRTC values in configurations
282 * *2019-03-24* Fix handling of recently disconnected outputs (See #128 and #143)
286 * *2019-03-18* Removed mandb call from Makefile
290 * *2019-02-17* Add an X11 daemon that runs autorandr when a display connects (by @rliou92, #127)
291 * *2019-02-17* Replace width=0 check with disconnected to detect disconnected monitors (by @joseph-jones, #139)
292 * *2019-02-17* Fix handling of empty padding (by @jschwab, #138)
293 * *2019-02-17* Add a man page (by @somers-all-the-time, #133)
297 * *2018-09-25* Fix FB size computation with rotated screens (by @Janno, #117)
301 * *2018-04-19* Bugfix: Do not load default profile unless --change is set
302 * *2018-04-30* Added a `AUTORANDR_MONITORS` variable to hooks (by @bricewge, #106)
303 * *2018-06-29* Fix detection of current configuration if extra monitors are active
304 * *2018-07-11* Bugfix in the latest change: Correctly handle "off" minitors when comparing
305 * *2018-07-19* Do not kill spawned user processes from systemd unit
306 * *2018-07-20* Correctly handle "off" monitors when comparing -- fixup for another bug.
310 * *2018-01-03* Add --version
311 * *2018-01-04* Fixed vertical/horizontal/clone-largest virtual profiles
312 * *2018-03-07* Output all non-error messages to stdout instead of stderr
313 * *2018-03-25* Add --detected and --current to filter the profile list output
314 * *2018-03-25* Allow wildcard matching in EDIDs
318 * *2017-12-22* Fixed broken virtual profile support
319 * *2017-12-14* Added support for a settings file
320 * *2017-12-14* Added a virtual profile `off`, which disables all screens
324 * *2017-11-13* Add a short form for `--load`
325 * *2017-11-21* Fix environment stealing in `--batch` mode (See #87)
329 * *2017-07-16* Skip `--panning` unless it is required (See #72)
330 * *2017-10-13* Add `clone-largest` virtual profile
334 * *2017-06-07* Call systemctl with `--no-block` from udev rule (See #61)
335 * *2017-01-20* New script hook, `predetect`
336 * *2017-01-18* Accept comments (lines starting with `#`) in config/setup files
340 * *2016-12-07* Tag the current code as version 1.0.0; see github issue #54
341 * *2016-10-03* Install a desktop file to `/etc/xdg/autostart` by default
343 %package zsh-completion
344 Summary: zsh-completion for autorandr
347 %description zsh-completion
348 This package provides zsh-completion files for autorandr
351 %setup -n %{name}-%{version} -n %{name}-%{version}
353 pathfix.py -pni "%{__python3} %{py3_shbang_opts}" ./autorandr.py
355 pathfix.py -pni "%{__python2} %{py2_shbang_opts}" ./autorandr.py
359 make DESTDIR="%{buildroot}" PREFIX=/usr install
360 install -vDm 644 README.md -t "%{buildroot}/usr/share/doc/%{name}/"
361 install -vDm 644 contrib/zsh_completion/_autorandr -t %{buildroot}%{_datarootdir}/zsh/site-functions/
365 %defattr(-,root,root,-)
366 %attr(0644,root,root) %{_unitdir}/autorandr.service
369 %config(noreplace) %{_sysconfdir}/*
372 %{_datarootdir}/bash-completion/completions/autorandr
373 %{_udevrulesdir}/40-monitor-hotplug.rules
375 %files zsh-completion
376 %{_datarootdir}/zsh/site-functions/_autorandr
379 * Mon Jun 08 2020 Jerzy Drozdz <jerzy.drozdz@jdsieci.pl> - 1.10.1-1
380 - Updated to stable 1.10.1
381 - Added zsh-completion subpackage
382 * Wed May 22 2019 Maciej Sitarz <macieksitarz@wp.pl> - 1.8.1-1
383 - Updated to stable 1.8.1
384 * Fri Sep 28 2018 Maciej Sitarz <macieksitarz@wp.pl> - 1.7-1
385 - Updated to stable 1.7
386 * Thu Jul 19 2018 Maciej Sitarz <macieksitarz@wp.pl> - 1.5-1
387 - Updated to stable 1.5
388 - Changed dest path for systemd service file
389 * Sun Oct 01 2017 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 1.1-2
390 - Added conditionals for pm-utils, compability with Fedora26+
391 - Removed bash-completion from requisites
392 - Removed udev from requisites
393 * Sun Sep 03 2017 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 1.1-1
394 - Update to stable 1.1
395 * Fri Feb 17 2017 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20170217git-1
397 * Wed Jul 6 2016 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20160706git-1
398 - Set default value of $XDG_CONFIG_DIRS to fulfill the standard
399 * Fri Jul 1 2016 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20160701git-1.1
400 - fixed running udevadm in post
401 * Fri Jul 1 2016 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20160701git-1