1 ###| CMAKE Kiibohd Controller |###
3 # Jacob Alexander 2011-2014
4 # Due to this file's usefulness:
6 # Released into the Public Domain
8 # avr-gcc CMake Build Configuration
14 #| Set the Compilers (must be set first)
15 include( CMakeForceCompiler )
16 cmake_force_c_compiler ( avr-gcc AVRCCompiler )
17 cmake_force_cxx_compiler( avr-g++ AVRCxxCompiler )
18 set( _CMAKE_TOOLCHAIN_PREFIX avr- )
23 # Atmel Defines and Linker Options
28 #| "at90usb162" # Teensy 1.0
29 #| "atmega32u4" # Teensy 2.0
30 #| "at90usb646" # Teensy++ 1.0
31 #| "at90usb1286" # Teensy++ 2.0
35 message( STATUS "MCU Selected:" )
39 #| Extra Compiler Sources
40 #| Mostly for convenience functions like interrupt handlers
42 # XXX Not needed for avr-gcc
47 #| This is only informational for AVR microcontrollers
48 #| The field can be determined by the microcontroller chip, but currently only one CPU type is used atm
51 message( STATUS "CPU Selected:" )
56 set( VENDOR_ID "0x16C0" )
57 set( PRODUCT_ID "0x047D" )
60 #| Compiler flag to set the C Standard level.
62 #| gnu89 = c89 plus GCC extensions
63 #| c99 = ISO C99 standard (not yet fully implemented)
64 #| gnu99 = c99 plus GCC extensions
65 set( CSTANDARD "-std=gnu99" )
69 #| -Wall...: warning level
74 #| -f...: tuning, see GCC manual and avr-libc documentation
75 #| NOTE: -fshort-wchar is specified to allow USB strings be passed conveniently
76 set( TUNING "-funsigned-char -funsigned-bitfields -ffunction-sections -fpack-struct -fshort-enums" )
79 #| Optimization level, can be [0, 1, 2, 3, s].
80 #| 0 = turn off optimization. s = optimize for size.
81 #| (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
90 #| Processor frequency.
91 #| Normally the first thing your program should do is set the clock prescaler,
92 #| so your program will run at the correct speed. You should also set this
93 #| variable to same clock speed. The _delay_ms() macro uses this, and many
94 #| examples use this variable to calculate timings. Do not add a "UL" here.
95 set( F_CPU "16000000" )
99 #| Compiler flags to generate dependency files.
100 set( GENDEPFLAGS "-MMD -MP" )
104 add_definitions( "-mmcu=${MCU} -DF_CPU=${F_CPU} -D_${MCU}_=1 -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" )
108 set( LINKER_FLAGS "-mmcu=${MCU} -Wl,-Map=${TARGET}.map,--cref -Wl,--relax -Wl,--gc-sections" )
111 #| Hex Flags (XXX, CMake seems to have issues if you quote the arguments for the custom commands...)
112 set( HEX_FLAGS -O ${FORMAT} -R .eeprom -R .fuse -R .lock -R .signature )
115 #| Eep Flags (XXX, I've removed this target from the builds, but keeping the set line as a note)
116 set( EEP_FLAGS -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ${FORMAT} )
120 set( LSS_FLAGS -h -S -z )