@c -*- coding: utf-8; mode: texinfo; documentlanguage: de -*-
@ignore
- Translation of GIT committish: c1df40da9f8b2794e173583c363f9e736e5531bd
+ Translation of GIT committish: e5a609e373eae846857f9a6d70a402a3d42b7d94
When revising a translation, copy the HEAD committish of the
version that you are working on. For details, see the Contributors'
Guide, node Updating translation committishes.
@end ignore
-@c \version "2.14.0"
+@c \version "2.19.21"
@c Translators: Till Paala
@section Notation auf Systemen
@translationof Staff notation
-@lilypondfile[quote]{staff-headword.ly}
+@c The line width is a bit of a hack to allow space for the
+@c instrument names.
+@lilypondfile[quote,ragged-right,line-width=14.5\cm,staffsize=16]{staff-headword.ly}
Dieser Abschnitt zeigt, wie die Erscheinung von Systemen beeinflusst
wird, wie Partituren mit mehr als einem System gesetzt werden und wie
@cindex neues Notensystem
@funindex \drummode
-@funindex drummode
@funindex DrumStaff
@funindex RhythmicStaff
@funindex TabStaff
@notation{Notensysteme} (engl. @notation{staff}, Pl. @notation{staves})
werden mit dem @code{\new} oder @code{\context}-Befehl erstellt. Zu
Einzelheiten siehe
-@ref{Kontexte erstellen}.
+@ref{Kontexte erstellen und referenzieren}.
Der einfachste Notensystem-Kontext ist @code{Staff}:
-@lilypond[verbatim,quote,relative=2]
-\new Staff { c4 d e f }
+@lilypond[verbatim,quote]
+\new Staff \relative { c''4 d e f }
@end lilypond
@code{DrumStaff} (Perkussionsnotensystem) erstellt ein Notensystem
erhalten. Zu Einzelheiten, siehe
@ref{Melodierhythmus anzeigen}.
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
\new RhythmicStaff { c4 d e f }
@end lilypond
Saiten in der üblichen Gitarrenstimmung. Zu Einzelheiten siehe
@ref{Standardtabulaturen}.
-@lilypond[verbatim,quote,relative=2]
-\new TabStaff { c4 d e f }
+@lilypond[verbatim,quote]
+\new TabStaff \relative { c''4 d e f }
@end lilypond
Es gibt zwei Notensysteme, die zur Notation von Alter Musik eingesetzt
Gregorianischen Chorals) erstellt ein Notensystem, um modernen
Gregorianischen Choral zu notieren. Es hat keine Notenlinien.
-@lilypond[verbatim,quote,relative=2]
-\new GregorianTranscriptionStaff { c4 d e f e d }
+@lilypond[verbatim,quote]
+\new GregorianTranscriptionStaff \relative { c''4 d e f e d }
@end lilypond
@rglos{staves}.
Notationsreferenz:
-@ref{Kontexte erstellen},
+@ref{Kontexte erstellen und referenzieren},
@ref{Schlagzeugsysteme},
@ref{Melodierhythmus anzeigen},
@ref{Standardtabulaturen},
die Gruppe beginnt mit einer vertikalen Linie und die Taktlinien sind
nicht verbunden.
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
<<
- \new Staff { c1 c }
- \new Staff { c1 c }
+ \new Staff \relative { c''1 c }
+ \new Staff \relative { c''1 c }
>>
@end lilypond
Im @code{StaffGroup}-Kontext die Gruppe mit einer eckigen Klammer
begonnen und die Taktlinien durch alle Systeme gezogen.
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
\new StaffGroup <<
- \new Staff { c1 c }
- \new Staff { c1 c }
+ \new Staff \relative { c''1 c }
+ \new Staff \relative { c''1 c }
>>
@end lilypond
In einem @code{ChoirStaff} (Chorsystem) beginnt die Gruppe mit einer
eckigen Klammer, aber die Taktlinien sind nicht verbunden.
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
\new ChoirStaff <<
- \new Staff { c1 c }
- \new Staff { c1 c }
+ \new Staff \relative { c''1 c }
+ \new Staff \relative { c''1 c }
>>
@end lilypond
In einem @code{GrandStaff} (Akkolade) beginnt die Gruppe mit einer
geschweiften Klammer und die Taktlinien sind durchgezogen.
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
\new GrandStaff <<
- \new Staff { c1 c }
- \new Staff { c1 c }
+ \new Staff \relative { c''1 c }
+ \new Staff \relative { c''1 c }
>>
@end lilypond
die Angabe einer Instrumentbezeichnung. Zu Einzelheiten siehe
@ref{Instrumentenbezeichnungen}.
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
\new PianoStaff <<
\set PianoStaff.instrumentName = #"Piano"
- \new Staff { c1 c }
- \new Staff { c1 c }
+ \new Staff \relative { c''1 c }
+ \new Staff \relative { \clef bass c1 c }
>>
@end lilypond
Klammer außerhalb der Klammer der Systemgruppe, in der er sich
befindet.
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
\new StaffGroup <<
- \new Staff { c2 c | c2 c }
+ \new Staff \relative { c''2 c | c2 c }
\new StaffGroup <<
- \new Staff { g2 g | g2 g }
+ \new Staff \relative { g'2 g | g2 g }
\new StaffGroup \with {
systemStartDelimiter = #'SystemStartSquare
}
<<
- \new Staff { e2 e | e2 e }
- \new Staff { c2 c | c2 c }
+ \new Staff \relative { e'2 e | e2 e }
+ \new Staff \relative { c'2 c | c2 c }
>>
>>
>>
\score {
\new StaffGroup <<
\new Staff {
- \relative c'' {
- c4 c c c
+ \relative {
+ c''4 c c c
\break
c4 c c c
}
}
\new Staff {
- \relative c'' {
- c4 c c c
+ \relative {
+ c''4 c c c
\break
c4 c c c
}
@cindex Notenlinien, Anzahl
@cindex Notenlinien, Dicke
@cindex Notenlinien, Einstellungen
-@cindex Staff symbol, Erstellen
-@cindex Notenlinien, Erstellen
+@cindex Staff symbol, erstellen
+@cindex Notenlinien, erstellen
@cindex Dicke der Notenlinien einstellen
@cindex Anzahl der Notenlinien einstellen
@cindex Zahl der Notenlinien einstellen
@cindex Notensystem beginnen
@cindex Beginnen eines Notensystems
@cindex Beenden eines Notensystems
+@cindex Notenlinien, beginnen
+@cindex Notenlinien, beenden
+@cindex Beenden von Notenlinien
+@cindex Beginnen von Notenlinien
+@cindex Beenden eines Systems
+@cindex System, beenden
+@cindex Notensystem, beenden
+
+
+@funindex \startStaff
+@funindex \stopStaff
+
+Die Befehle @code{\stopStaff} und @code{\startStaff} können
+benutzt werden, um ein Notensystem zu stoppen oder (wieder)
+zu beginnen.
+
+@lilypond[verbatim,quote]
+\relative {
+ \stopStaff f''4 d \startStaff g, e
+ f'4 d \stopStaff g, e
+ f'4 d \startStaff g, e
+}
+@end lilypond
+
+@predefined
+@code{\startStaff},
+@code{\stopStaff}.
+@endpredefined
Die Linien eines Notensystems gehören zu dem
-@code{StaffSymbol}-(NotensystemSymbol)-Grob.
+@code{StaffSymbol}-(NotensystemSymbol)-Grob (hierzu gehören auch
+Hilfslinien).
@code{StaffSymbol}-Eigenschaften können verändert werden, um die
Erscheinung des Notensystems zu beeinflussen, aber sie müssen
gesetzt werden, bevor das System erstellt wird.
-Die Anzahl der Notenlinien kann verändert werden. Die Position
-des Notenschlüssels und die Position von c' können geändert werden,
-um dem neuen System zu entsprechen. Eine Erklärung findet sich
-im Schnipselabschnit in
-@ref{Notenschlüssel}.
+Die Anzahl der Notenlinien kann verändert werden:
-@lilypond[verbatim,quote,relative=2]
-\new Staff \with {
- \override StaffSymbol #'line-count = #3
+@lilypond[verbatim,quote]
+\relative {
+ f''4 d \stopStaff
+ \override Staff.StaffSymbol.line-count = #2
+ \startStaff g, e |
+
+ f'4 d \stopStaff
+ \revert Staff.StaffSymbol.line-count
+ \startStaff g, e |
+}
+@end lilypond
+
+
+Auch die Position der Notenlinien kann geändert werden. Die
+Werte werden in @emph{halben} Notensystemabständen eingegeben
+und die neue Position ist relativ zur ursprünglichen Mittellinie.
+Eine einzelne Linie wird für jeden Wert ausgegeben, sodass
+die Anzahl der Linien sowie ihre Position im Notensystem mit
+einem Befehl geändert werden können.
+
+@lilypond[verbatim,quote]
+\relative {
+ f''4 d \stopStaff
+ \override Staff.StaffSymbol.line-positions = #'(1 3 5 -1 -3)
+ \startStaff g, e |
+ f'4 d \stopStaff
+ \override Staff.StaffSymbol.line-positions = #'(8 6.5 -6 -8 -0.5)
+ \startStaff g, e |
}
-{ d4 d d d }
@end lilypond
+die Position des Notenschlüssels und die Position von c' können geändert
+werden, um dem neuen System zu entsprechen. Siehe auch
+@ref{Notenschlüssel}.
+
Die Liniendicke der Notenlinien kann verändert werden. Die Dicke
der Hilfslinien und Notenhälse wird auch beeinflusst, weil sie
von der Notenliniendicke abhängen.
-@lilypond[verbatim,quote,relative=1]
+@lilypond[verbatim,quote]
\new Staff \with {
- \override StaffSymbol #'thickness = #3
+ \override StaffSymbol.thickness = #3
+} \relative {
+ f''4 d g, e
}
-{ e4 d c b }
@end lilypond
-Die Dicke der Hilfslinien kann auch unabhängig von der
-Notenliniendicke verändert werden. Die zwei Zahlen in dem Beispiel
+Die Dicke der Hilfslinien (engl. ledger lines) kann allerdings auch unabhängig von der
+Notenliniendicke verändert werden. Die zwei Zahlen, die nötig sind,
sind Faktoren, mit denen die Notenlinien-Dicke und der
Notenlinienabstand multipliziert werden. Die Addition beider
Werte ergibt die Dicke der Hilfslinien.
-@lilypond[verbatim,quote,relative=1]
+@lilypond[verbatim,quote]
\new Staff \with {
- \override StaffSymbol #'ledger-line-thickness = #'(1 . 0.2)
+ \override StaffSymbol.thickness = #2
+ \override StaffSymbol.ledger-line-thickness = #'(0.5 . 0.4)
+} \relative {
+ f'''4 a, a,, f
}
-{ e4 d c b }
@end lilypond
-Der Abstand zwischen Notenlinien kann verändert werden. Diese
-Einstellung wirkt sich auch auf den Abstand der Hilfslinien aus.
+Die vertikale Position der Hilfslinien kann verändert werden:
-@lilypond[verbatim,quote,relative=1]
+@lilypond[verbatim,quote]
\new Staff \with {
- \override StaffSymbol #'staff-space = #1.5
+ \override StaffSymbol.ledger-positions = #'(-3 -2 -1 2 5 6)
+} \relative {
+ f'''4 a, a,, f
}
-{ a4 b c d }
@end lilypond
-Weitere Einzelheiten zu den Eigenschaften von @code{StaffSymbol}
-findet sich in @rinternals{staff-symbol-interface}.
-
-@cindex Notenlinien, beginnen
-@cindex Notenlinien, beenden
-@cindex Beenden von Notenlinien
-@cindex Beginnen von Notenlinien
-@cindex Beenden eines Systems
-@cindex System, beenden
-@cindex Notensystem, beenden
-
-@funindex \startStaff
-@funindex \stopStaff
-@funindex startStaff
-@funindex stopStaff
-
-Veränderungen der Eigenschaften eines Notensystems mitten in einer
-Partitur können zwischen die Befehle @code{\stopStaff} und
-@code{\startStaff} gesetzt werden:
+Zusätzliche Hilfslinien können auch innerhalb des Systems gesetzt
+werden, wenn sie von einem selbsdefinierten Notensystem genötigt
+werden. Das Beispiel zeigt die Standardposition der Hilfslinien
+wenn die explizite Position mit @code{legder-position} nicht
+definiert ist. Der Befehl @code{stopStaff} wird benötigt, damit
+der Befehl sich auf das gesamte System (@code{StaffSymbol}) auswirkt.
-@lilypond[verbatim,quote,relative=2]
-c2 c
-\stopStaff
-\override Staff.StaffSymbol #'line-count = #2
-\startStaff
-b2 b
+@lilypond[fragment,quote,relative=1]
+\override Staff.StaffSymbol.line-positions = #'(-8 0 2 4)
+d4 e f g
\stopStaff
-\revert Staff.StaffSymbol #'line-count
\startStaff
-a2 a
+\override Staff.StaffSymbol.ledger-positions = #'(-8 -6 (-4 -2) 0)
+d4 e f g
@end lilypond
-@noindent
-Die Befehle @code{\startStaff} und @code{\stopStaff} können
-benutzt werden, um ein Notensystem irgendwo zu beenden oder zu
-beginnen.
+Der Abstand zwischen Notenlinien kann verändert werden. Diese
+Einstellung wirkt sich auch auf den Abstand der Hilfslinien aus.
-@lilypond[verbatim,quote,relative=2]
-c4 b a2
-\stopStaff
-b4 c d2
-\startStaff
-e4 d c2
+@lilypond[verbatim,quote]
+\new Staff \with {
+ \override StaffSymbol.staff-space = #1.5
+} \relative {
+ f'''4 d, g, e,
+}
@end lilypond
-
-@predefined
-@code{\startStaff},
-@code{\stopStaff}.
-@endpredefined
-
-
@snippets
-
@lilypondfile[verbatim,quote,texidoc,doctitle]
{making-some-staff-lines-thicker-than-the-others.ly}
-
@seealso
Glossar:
@rglos{line},
@rinternals{staff-symbol-interface}.
-
@node Ossia-Systeme
@unnumberedsubsubsec Ossia-Systeme
@translationof Ossia staves
erstellt werden:
@lilypond[verbatim,quote]
-\new Staff \relative c'' {
- c4 b d c
+\new Staff \relative {
+ c''4 b d c
<<
{ c4 b d c }
\new Staff { e4 d f e }
bietet sich an, wenn nur einige Ossia-Systeme benötigt werden.
@lilypond[verbatim,quote]
-\new Staff = main \relative c'' {
- c4 b d c
+\new Staff = main \relative {
+ c''4 b d c
<<
{ c4 b d c }
\remove "Time_signature_engraver"
alignAboveContext = #"main"
fontSize = #-3
- \override StaffSymbol #'staff-space = #(magstep -3)
- \override StaffSymbol #'thickness = #(magstep -3)
+ \override StaffSymbol.staff-space = #(magstep -3)
+ \override StaffSymbol.thickness = #(magstep -3)
firstClef = ##f
}
{ e4 d f e }
<<
\new Staff = ossia \with {
\remove "Time_signature_engraver"
- \override Clef #'transparent = ##t
+ \hide Clef
fontSize = #-3
- \override StaffSymbol #'staff-space = #(magstep -3)
- \override StaffSymbol #'thickness = #(magstep -3)
+ \override StaffSymbol.staff-space = #(magstep -3)
+ \override StaffSymbol.thickness = #(magstep -3)
}
{ \stopStaff s1*6 }
- \new Staff \relative c' {
- c4 b c2
+ \new Staff \relative {
+ c'4 b c2
<<
{ e4 f e2 }
\context Staff = ossia {
<<
\new Staff = ossia \with {
\remove "Time_signature_engraver"
- \override Clef #'transparent = ##t
+ \hide Clef
fontSize = #-3
- \override StaffSymbol #'staff-space = #(magstep -3)
- \override StaffSymbol #'thickness = #(magstep -3)
- } \relative c'' {
+ \override StaffSymbol.staff-space = #(magstep -3)
+ \override StaffSymbol.thickness = #(magstep -3)
+ } \relative {
R1*3
- c4 e8 d c2
+ c''4 e8 d c2
}
- \new Staff \relative c' {
- c4 b c2
+ \new Staff \relative {
+ c'4 b c2
e4 f e2
g4 a g2 \break
c4 b c2
\layout {
\context {
\Staff \RemoveEmptyStaves
- \override VerticalAxisGroup #'remove-first = ##t
+ \override VerticalAxisGroup.remove-first = ##t
}
}
@end lilypond
@cindex Verschwinden von leeren Systemen
@funindex \RemoveEmptyStaves
-@funindex RemoveEmptyStaves
@funindex Staff_symbol_engraver
@funindex \stopStaff
-@funindex stopStaff
Die Notenlinien können entfernt werden, indem der
@code{Staff_symbol_engraver} aus dem @code{Staff}-Kontext
\new Staff \with {
\remove "Staff_symbol_engraver"
}
-\relative c''' { a8 f e16 d c b a2 }
+\relative { a''8 f e16 d c b a2 }
@end lilypond
Leere Systeme können versteckt werden, wenn der
}
}
-\relative c' <<
+\relative <<
\new Staff {
- e4 f g a \break
+ e'4 f g a \break
b1 \break
a4 b c2
}
@cindex Verstecken von Systemen der Alten Musik
@cindex Verstecken von Rhythmus-Systemen
-
@funindex \RemoveEmptyStaves
-@funindex RemoveEmptyStaves
Der @code{\VaticanaStaff \RemoveEmptyStaves}-Befehl kann
benutzt werden, um leere Takte in Notation der Alten Musik
leere Takte in einem
@code{RhythmicStaff}-Kontext zu entfernen.
-
@predefined
@code{\Staff \RemoveEmptyStaves},
@code{\VaticanaStaff \RemoveEmptyStaves},
@code{\RhythmicStaff \RemoveEmptyStaves}.
@endpredefined
-
@snippets
-
@lilypondfile[verbatim,quote,texidoc,doctitle]
{removing-the-first-empty-line.ly}
-
@seealso
Glossar:
@rglos{Frenched staff}.
@rinternals{VerticalAxisGroup},
@rinternals{Staff_symbol_engraver}.
-
@knownissues
-
Wenn man den @code{Staff_symbol_engraver} entfernt, werden auch
die Taktlinien entfernt. Wenn eine sichtbare Taktlinie
angefordert wird, kann es zu Formatierungsfehlern kommen. In
den Engraver zu entfernen:
@example
-\override StaffSymbol #'stencil = ##f
-\override NoteHead #'no-ledgers = ##t
+\omit StaffSymbol
+\override NoteHead.no-ledgers = ##t
@end example
Zu den bekannten Fehlern und Warnungen, die mit @code{\Staff \RemoveEmptyStaves}
System eingesetzt, der Wert von @code{shortInstrumentName} für
alle weiteren Systeme.
-@lilypond[verbatim,quote,ragged-right,relative=1]
-\set Staff.instrumentName = #"Violin "
-\set Staff.shortInstrumentName = #"Vln "
-c4.. g'16 c4.. g'16
-\break
-c1
+@lilypond[verbatim,quote,ragged-right]
+\new Staff \with {
+ instrumentName = #"Violin "
+ shortInstrumentName = #"Vln. "
+} \relative {
+ c'4.. g'16 c4.. g'16 \break | c1 |
+}
@end lilypond
-Mit dem Textbeschriftungsmodus können auch komplizierte
+@cindex Instrumentenbezeichnung, komplexe
+
+Mit dem Textbeschriftungsmodus (@code{\markup}) können auch komplizierte
Instrumentenbezeichnungen erstellt werden:
-@lilypond[verbatim,quote,relative=2]
-\set Staff.instrumentName = \markup {
- \column { "Clarinetti"
- \line { "in B" \smaller \flat } } }
-c4 c,16 d e f g2
+@lilypond[verbatim,quote]
+\new Staff \with {
+ instrumentName = \markup {
+ \column { "Clarinetti"
+ \line { "in B" \smaller \flat }
+ }
+ }
+} \relative {
+ c''4 c,16 d e f g2
+}
@end lilypond
-@cindex Instrumentenbezeichnung, Notation
+@cindex Instrumentenbezeichnung, zentriert
Wenn zwei oder mehr Systeme gruppiert werden, werden die
Instrumentenbezeichnungen automatisch zentriert. Um auch
@lilypond[verbatim,quote,indent=1.5\cm,relative=2]
<<
- \new Staff {
- \set Staff.instrumentName = #"Flute"
- f2 g4 f
+ \new Staff \with {
+ instrumentName = #"Flute"
}
- \new Staff {
- \set Staff.instrumentName = \markup \center-column {
- Clarinet
+ { f2 g4 f }
+ \new Staff \with {
+ instrumentName = \markup {
+ \center-column { "Clarinet" }
\line { "in B" \smaller \flat }
}
- c4 b c2
}
+ { c4 b c2 }
>>
@end lilypond
dass die Bezeichnungen in einer Gruppe nicht zentriert werden.
Um dennoch eine Zentrierung zu erhalten, müssen die Werte des
Einzugs (@code{indent} und @code{short-indent}) vergrößert werden.
-Zu Einzelheiten siehe @ref{\paper-Variablen für Verschiebungen und Einrückungen}.
+Zu Einzelheiten siehe @ref{paper-Variablen für Verschiebungen und Einrückungen,,@code{@bs{}paper}-Variablen für Verschiebungen und Einrückungen}.
@lilypond[verbatim,quote,ragged-right]
-\layout {
- indent = 3.0\cm
- short-indent = 1.5\cm
-}
-
-\relative c'' <<
- \new Staff {
- \set Staff.instrumentName = #"Alto Flute in G"
- \set Staff.shortInstrumentName = #"Fl."
- f2 g4 f \break
+<<
+ \new Staff \with {
+ instrumentName = #"Alto Flute in G"
+ shortInstrumentName = #"Flt."
+ } \relative {
+ f''2 g4 f \break
g4 f g2
}
- \new Staff {
- \set Staff.instrumentName = #"Clarinet"
- \set Staff.shortInstrumentName = #"Clar."
- c,4 b c2 \break
+ \new Staff \with {
+ instrumentName = #"Clarinet"
+ shortInstrumentName = #"Clar."
+ } \relative {
+ c''4 b c2 \break
c2 b4 c
}
>>
+
+\layout {
+ indent = 3.0\cm
+ short-indent = 1.5\cm
+}
@end lilypond
@cindex Instrumentenbezeichnungen zu anderen Kontexten hinzufügen
@cindex Instrumentenbezeichnungen, wechseln
@cindex Wechseln von Instrumentenbezeichnungen
-Instrumentenbezeichnungen können mitten in einer Partitur
-geändert werden. Dabei muss jedoch beachtet werden, dass
-@code{instrumentName} nicht mitten im Stück angezeigt wird,
-denn es wird nur für das erste Notensystem ausgegeben:
+Die kurzen Instrumentenbezeichnungen können mitten in einer Partitur
+geändert werden. Die Lange Bezeichnung
+@code{instrumentName} wird nur bei ihrem ersten Auftreten gesetzt
+und spätere Änderungen nicht berücksichtigt.
@lilypond[verbatim,quote,ragged-right,relative=1]
-\set Staff.instrumentName = #"First"
-\set Staff.shortInstrumentName = #"one"
-c1 c c c \break
-c1 c c c \break
-\set Staff.instrumentName = #"Second"
-\set Staff.shortInstrumentName = #"two"
-c1 c c c \break
-c1 c c c \break
+\new Staff \with {
+ instrumentName = #"Flute"
+ shortInstrumentName = #"Flt."
+}
+{
+ c1 c c c \break
+ c1 c c c \break
+ \set Staff.instrumentName = #"Clarinet"
+ \set Staff.shortInstrumentName = #"Clt."
+ c1 c c c \break
+ c1 c c c \break
+}
@end lilypond
@cindex Instrumentenwechsel
@cindex Wechsel von Instrument
@funindex \addInstrumentDefinition
-@funindex addInstrumentDefinition
@funindex \instrumentSwitch
-@funindex instrumentSwitch
Wenn das Instrument gewechselt werden soll, kann der Befehl
@code{\addInstrumentDefinition} in Begleitung von
R1*16
\instrumentSwitch "contrabassoon"
c,,2 g \break
- c,1 ~ | c1
+ c,1 ~ | 1
}
@end lilypond
@seealso
Notationsreferenz:
-@ref{\paper-Variablen für Verschiebungen und Einrückungen},
+@ref{paper-Variablen für Verschiebungen und Einrückungen,,@code{@bs{}paper}-Variablen für Verschiebungen und Einrückungen},
@ref{Umgebungs-Plugins verändern}.
Schnipsel:
@cindex Stimmen, zitieren
@funindex \addQuote
-@funindex addQuote
@funindex \quoteDuring
-@funindex quoteDuring
@funindex \transposition
-@funindex transposition
Es kommt sehr oft vor, dass eine Orchesterstimme die gleichen
Noten wie eine andere spielt. So können etwa die ersten und
für die Dauer des Zitates.
@lilypond[verbatim,quote]
-fluteNotes = \relative c'' {
- a4 gis g gis | b4^"quoted" r8 ais\p a4( f)
+fluteNotes = \relative {
+ a'4 gis g gis | b4^"quoted" r8 ais\p a4( f)
}
-oboeNotes = \relative c'' {
- c4 cis c b \quoteDuring #"flute" { s1 }
+oboeNotes = \relative {
+ c''4 cis c b \quoteDuring #"flute" { s1 }
}
\addQuote "flute" { \fluteNotes }
polyphone Stelle begonnen, was meistens nicht erwünscht ist:
@lilypond[verbatim,quote]
-fluteNotes = \relative c'' {
- a4 gis g gis | b4^"quoted" r8 ais\p a4( f)
+fluteNotes = \relative {
+ a'4 gis g gis | b4^"quoted" r8 ais\p a4( f)
}
-oboeNotes = \relative c'' {
- c4 cis c b \quoteDuring #"flute" { e4 r8 ais b4 a }
+oboeNotes = \relative {
+ c''4 cis c b \quoteDuring #"flute" { e4 r8 ais b4 a }
}
\addQuote "flute" { \fluteNotes }
b4 ais a ais | cis4^"quoted" r8 bis\p b4( f)
}
-oboeNotes = \relative c'' {
- c4 cis c b \quoteDuring #"clarinet" { s1 }
+oboeNotes = \relative {
+ c''4 cis c b \quoteDuring #"clarinet" { s1 }
}
\addQuote "clarinet" { \clarinetNotes }
-
\score {
<<
\new Staff \with { instrumentName = "Clarinet" } \clarinetNotes
Das geschieht mit der @code{quotedEventTypes}-Kontexteigenschaft.
@lilypond[verbatim,quote]
-fluteNotes = \relative c'' {
- a2 g2 |
+fluteNotes = \relative {
+ a'2 g2 |
b4\<^"quoted" r8 ais a4\f( c->)
}
-oboeNotes = \relative c'' {
- c2. b4 |
+oboeNotes = \relative {
+ c''2. b4 |
\quoteDuring #"flute" { s1 }
}
@ref{Transposition von Instrumenten},
@ref{Marken benutzen}.
+Installierte Dateien:
+@file{scm/define-event-classes.scm}.
+
Schnipsel:
@rlsr{Staff notation}.
@rinternals{QuoteMusic},
@rinternals{Voice}.
-Installed Files:
-@file{scm/define-event-classes.scm}.
-
@knownissues
-
Nur der Inhalt der ersten Stimme innerhalb eines
@code{\addQuote}-Befehls wird für das Zitat herangezogen. Wenn
der zitierte Ausdruck also @code{\new} oder @code{\context Voice}-Befehle
@cindex Zitieren von anderen Stimmen
@funindex \cueDuring
-@funindex cueDuring
@funindex \cueClef
-@funindex cueClef
@funindex \cueDuringWithClef
-@funindex cueDuringWithClef
@funindex \quoteDuring
-@funindex quoteDuring
@cindex Noten, kleiner
@cindex kleinere Noten
Die einfachste Art, Stichnoten zu erstellen, ist es, einen
@code{CueVoice}-Kontext in der Stimme zu erstellen.
-@lilypond[verbatim,relative=1]
-R1
-<<
- { e2\rest r4. e8 }
- \new CueVoice {
- \stemUp d'8^"flute" c d e fis2
- }
->>
-d,4 r a r
+@lilypond[verbatim]
+\relative {
+ R1
+ <<
+ { e'2\rest r4. e8 }
+ \new CueVoice {
+ \stemUp d'8^"flute" c d e fis2
+ }
+ >>
+ d,4 r a r
+}
@end lilypond
Der Befehl @code{\cueClef} kann auch in einem expliziten
eingesetzt werden, um wieder zum ursprünglichen Schlüssel zurückzukehren,
wiederum in der richtigen Größe:
-@lilypond[verbatim,noragged-right,relative=1]
-\clef "bass"
-R1
-<<
- { e2\rest r4. \cueClefUnset e,8 }
- \new CueVoice {
- \cueClef "treble" \stemUp d''8^"flute" c d e fis2
- }
->>
-d,,4 r a r
+@lilypond[verbatim,noragged-right]
+\relative {
+ \clef "bass"
+ R1
+ <<
+ { e'2\rest r4. \cueClefUnset e,8 }
+ \new CueVoice {
+ \cueClef "treble" \stemUp d''8^"flute" c d e fis2
+ }
+ >>
+ d,,4 r a r
+}
@end lilypond
Die Befehle @code{\cueClef} und @code{\cueClefUnset} können auch ohne
eine @code{CueVoice}-Umgebung eingesetzt werden:
-@lilypond[verbatim,noragged-right,relative=1]
-\clef "bass"
-R1
-\cueClef "treble"
-d'8^"flute" c d e fis2
-\cueClefUnset
-d,,4 r a r
+@lilypond[verbatim,noragged-right]
+\relative {
+ \clef "bass"
+ R1
+ \cueClef "treble"
+ d''8^"flute" c d e fis2
+ \cueClefUnset
+ d,,4 r a r
+}
@end lilypond
Für kompliziertere Stichnotenbehandlung, etwa mit Transposition,
in einem System gesetzt werden.
@lilypond[verbatim,quote]
-fluteNotes = \relative c'' {
- r2. c4 | d8 c d e fis2 | g2 d |
+fluteNotes = \relative {
+ r2. c''4 | d8 c d e fis2 | g2 d |
}
oboeNotes = \relative c'' {
R1
- s1*0^\markup { \tiny "flute" }
+ \new CueVoice { \set instrumentCueName = "flute" }
\cueDuring #"flute" #UP { R1 }
g2 c,
}
@code{CueVoice}-Kontext gehören würde.}
@lilypond[verbatim,quote]
-oboeNotes = \relative c'' {
- r2 r8 d16(\f f e g f a)
+oboeNotes = \relative {
+ r2 r8 d''16(\f f e g f a)
g8 g16 g g2.
}
\addQuote "oboe" { \oboeNotes }
}
@end lilypond
-Beschriftung kann auch benutzt werden, um die Bezeichnung des zitierten
-Instruments anzuzeigen. Wenn die Stichnoten einen Schlüsselwechsel
-erfordern, kann er manuell erzeugt werden -- dann muss aber der
-ursprüngliche Schlüssel am Ende der Stichnoten wieder hergestellt werden:
+Die Bezeichnung des gerade spielenden Instruments in den Stichnoten
+kann gesetzt werden, indem man die @code{instrumentCueName}-Eigenschaft
+in einen temporären @code{CueVoice}-Kontext setzt. Die Platzierung und
+der Stil von @code{instrumentCueName} wird durch das @code{\instrumentSwitch}-Objekt
+kontrolliert, siehe @ref{Instrumentenbezeichnungen}. Wenn die Stichnoten
+einen Schlüsselwechsel erfordern, kann dieser manuell hervorgerufen werden,
+aber der originale Schlüssel muss auch manuell am Ende der Stichnoten
+wieder hergestellt werden.
@lilypond[verbatim,quote]
-fluteNotes = \relative c'' {
- r2. c4 d8 c d e fis2 g2 d2
+fluteNotes = \relative {
+ r2. c''4 d8 c d e fis2 g2 d2
}
bassoonNotes = \relative c {
\clef bass
R1
\clef treble
- s1*0^\markup { \tiny "flute" }
+ \new CueVoice { \set instrumentCueName = "flute" }
\cueDuring #"flute" #UP { R1 }
\clef bass
g4. b8 d2
originale Schlüssel wird automatisch wieder hergesetllt.
@lilypond[verbatim,quote]
-fluteNotes = \relative c'' {
- r2. c4 d8 c d e fis2 g2 d2
+fluteNotes = \relative {
+ r2. c''4 d8 c d e fis2 g2 d2
}
bassoonNotes = \relative c {
\clef bass
R1
- s1*0^\markup { \tiny "flute" }
+ \new CueVoice { \set instrumentCueName = "flute" }
\cueDuringWithClef #"flute" #UP #"treble" { R1 }
g4. b8 d2
}
@end lilypond
@funindex \transposedCueDuring
-@funindex transposedCueDuring
Genauso wie @code{\quoteDuring} berücksichtigt auch @code{\cueDuring}
Transpositionen. Stichnoten werden auf den Tonhöhen erstellt, die für
Um Stichnoten anders zu transponieren, muss @code{\transposedCueDuring}
benutzt werden. Dieser Befehl braucht ein zusätzliches Argument, um
(in absolutem Modus) die gedruckte Tonhöhe vorzugeben, mit der das
-das zweigestrichene C dargestellt werden soll. Das ist nützlich, wenn
+das eingestrichene C dargestellt werden soll. Das ist nützlich, wenn
man Stichnoten von einem Instrument mit einem vollständig anderen
Register benutzt:
@lilypond[verbatim,quote]
-piccoloNotes = \relative c''' {
+piccoloNotes = \relative {
\clef "treble^8"
R1
- c8 c c e g2
+ c'''8 c c e g2
c4 g g2
}
@cindex cue notes, removing
@funindex \killCues
-@funindex killCues
@funindex \addInstrumentDefinition
-@funindex addInstrumentDefinition
Der @code{\killCues}-Befehl entfernt Stichnoten aus einem
musikalischen Ausdruck, sodass derselbe musikalische Ausdruck
siehe @ref{Marken benutzen}.
@lilypond[verbatim,quote]
-fluteNotes = \relative c'' {
- r2. c4 d8 c d e fis2 g2 d2
+fluteNotes = \relative {
+ r2. c''4 d8 c d e fis2 g2 d2
}
bassoonNotes = \relative c {
R1
\tag #'part {
\clef treble
- s1*0^\markup { \tiny "flute" }
+ \new CueVoice { \set instrumentCueName = "flute" }
}
\cueDuring #"flute" #UP { R1 }
\tag #'part \clef bass