Table of Contents ***************** INSTALL - compiling and installing GNU LilyPond Downloading Source code Precompiled binaries Upgrading Requirements Compilation Running requirements Website requirements Building LilyPond Configuring for multiple platforms Emacs mode Compiling for distributions Red Hat Linux LinuxPPC SuSE Slackware Mandrake Debian GNU/Linux Problems FLex-2.5.4a and gcc-3.0 Linux-2.4.0, Guile-1.4 -with-threads NetBSD Solaris: AIX INSTALL - compiling and installing GNU LilyPond *********************************************** This document describes how to build LilyPond on Unix platforms. It is also known to run and compile on Windows NT/95/98 as well. More information on this topic can be found at the LilyPond on Windows page (http://www.lilypond.org/gnu-windows/). Downloading =========== Even numbered versions are `stable'. The webpages for the stable version (1.2) reside on the GNU servers (http://www.gnu.org/software/lilypond). Big enhancements go into the latest odd numbered version (1.3), whose webpages are on the lilypond site (http://www.lilypond.org/). Source code ----------- If you want to compile LilyPond from source, download here: * Download development releases from `ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/' by FTP and `http://ftp.cs.uu.nl/pub/GNU/LilyPond/', by HTTP. * `ftp://sca.uwaterloo.ca/pub/' by FTP (Canadian mirror) * at `lilypond.org' `ftp://ftp.lilypond.org/pub/LilyPond/' by FTP and `http://www.lilypond.org/ftp/' by HTTP. Of course, if your platform supports LilyPond, such as Debian GNU/Linux, FreeBSD, OpenBSD or NetBSD, you're encouraged to use the native build from source drill. For Red Hat Linux and SuSE Linux, `.spec' files are included in the tarball; see instructions below. Precompiled binaries -------------------- If you want to track bleeding edge development, try: * Debian GNU/Linux (ftp://ftp.debian.org/debian/pool/main/l/lilypond/) usually has the latest binaries for the most useful stable and development versions, while * Mandrake Cooker (http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/) also provides fairly recent versions. Binaries are made available for other popular platforms, but as we need to compile them ourselves, they are not updated for every version released. * Red Hat i386 (ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/RedHat/RPMS/) * SuSE (ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE) * LinuxPPC (ftp://ftp.lilypond.org/pub/LilyPond/binaries/linuxppc/) * Windows (http://www.lilypond.org/gnu-windows/) Upgrading --------- There are two options for upgrading sources. * if you have an unpacked source tree of a previous version, you may the patches. _If you upgrade by patching do remember to rerun autoconf after applying the patch_. * if you have the `.tar.gz' file of a previous release, you can use xdelta (ftp://ftp.xcf.berkeley.edu/pub/xdelta/). This is much safer than using patches, and is the recommended way. The following command produces `lilypond-1.4.3.tar.gz' from `lilypond-1.4.2.tar.gz' identical (up to compression dates) to the .3 on the FTP site. xdelta patch lilypond-1.4.2-1.4.3.xd lilypond-1.4.2.tar.gz Requirements ============ Compilation ----------- You need the following packages to compile Lilypond. * A reasonably new C++ compiler: EGCS 1.1, GCC 2.95.2 or newer. Check out the gcc site (ftp://ftp.gnu.org/gnu/gcc/). * Python 1.5, Check out the python website (http://www.python.org). * GUILE 1.3.4 or newer, check out the GUILE webpage (http://www.gnu.org/software/guile/guile.html). Version 1.4 is recommended for better performance. * GNU Make. Check out the GNU make FTP directory (ftp://ftp.gnu.org/gnu/make/). * Flex (version 2.5.4a or newer). Check out the Flex webpage (http://www.gnu.org/software/flex/). * Bison (version 1.25 or newer). Check out the bison webpage (http://www.gnu.org/software/bison/) * TeX. TeX is used as an output backend. Also, TeX's libkpathsea is used to find the fonts (`.mf', `.afm', `.tfm'). Make sure you have tetex 1.0 or newer (1.0.6 is known to work). You may need to install a tetex-devel or tetex-dev package too. * Texinfo (version 4.0 or newer). The documentation of lily is written in texinfo. Check out the texinfo FTP directory (ftp://ftp.gnu.org/gnu/texinfo/). * The geometry package for LaTeX is needed to use ly2dvi. It is available at the FTP directory for `geometry' (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry). This package is normally included with the TeX distribution. * kpathsea, a library for searching (TeX) files. `kpathsea' is usually included with your installation of TeX. You may need to install a tetex-devel or tetex-dev package too. In the very unlikely case that kpathsea is not available for your platform (ie, you're not running GNU/Linux, Windows, or any recent UNIX), you can compile LilyPond without kpathsea support. In that case, you'll probably have to indicate where TeX's tfm files live. Invoke configure something like: ./configure --without-kpathsea --enable-tfm-path=/usr/share/texmf/fonts/tfm/public/cm/:/usr/share/texmf/fonts/tfm/ams/symbols * pktrace, [OPTIONAL], needed for generating PostScript Type1 fonts. Get it from `http://www.cs.uu.nl/~hanwen/pktrace/' * autotrace-0.27a, [OPTIONAL], needed for generating PostScript Type1 fonts. `http://autotrace.sourceforge.net'. * MetaPost [OPTIONAL] needed for generating PostScript Type3 fonts. Please note that tetex-0.4pl8 (included with Red Hat 5.x) does not include `mfplain.mp', which is needed for producing the scalable font files. If you don't have MetaPost and don't want to use PostScript output, then edit `mf/GNUmakefile', removing the line saying `PFA_FILES='. Running requirements -------------------- GNU LilyPond does use a lot of resources. For operation you need the following software * TeX. * Xdvi and Ghostscript * GUILE 1.3.4, or newer. Check out the GUILE webpage (http://www.gnu.org/software/guile.html) For running LilyPond successfully you have to help TeX and MetaFont find various files. The recommended way of doing so is adjusting the environment variables in the start-up scripts of your shell. Appropriate Csh and bourne sh scripts are left in `buildscripts/out/lilypond-profile' and `buildscripts/out/lilypond-login' after compilation. LilyPond is a big and slow program. A fast CPU and plenty of RAM is recommended for comfortable use. Website requirements -------------------- The documentation comes in the form of a website. You can view this website on the internet, but you can also build it locally. This process requires a successful compile of lilypond. The website is built by issuing make web-doc Building the website requires some additional tools: * xpmtoppm (from the netpbm package: the Portable Bitmap Utilities). The original is at the netpbm FTP site (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz) * pnmtopng. The original is at in the pnmtopng FTP site (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz). * texinfo (a development release) The documentation will build with texinfo-4.0, but if you want split html pages, you're best off using the lates pretest version from texinfo-4.0b (ftp://texinfo.org/texinfo/pretests/texinfo-4.0b.tar.gz) or texinfo-4.0b (ftp://alpha.gnu.org/gnu/texinfo-4.0b.tar.gz) Building LilyPond ================== to install GNU LilyPond, type: gunzip -c lilypond-x.y.z | tar xf - cd lilypond-x.y.z ./configure # run with --help to see appropriate options make make install sh buildscripts/clean-fonts.sh If you are doing an upgrade, you should remove all `feta' `.pk' and `.tfm' files. A script has been provided to do the work for you, see `buildscripts/clean-fonts.sh'. If you are not root, you should choose a `--prefix' argument that points into your home directory, eg. ./configure --prefix=$HOME/usr In this case, you have to insert the contents of `buildscripts/out/lilypond-login' or `buildscripts/out/lilypond-profile' into your start up scripts by hand. Configuring for multiple platforms ---------------------------------- If you want to build multiple versions of LilyPond with different configuration settings, you can use the `--enable-config=CONF' option of configure. You should use `make conf=CONF' to generate the output in `out-CONF'. Example: suppose I want to build with and without profiling. Then I'd use the following for the normal build, ./configure --prefix=~ --enable-checking make make install and for the profiling version, I specify a different configuration. ./configure --prefix=~ --enable-profiling --enable-config=prof --disable-checking make conf=prof make conf=prof install Emacs mode ========== An Emacs mode for entering music and running LilyPond is included with the source archive as `lilypond-mode.el' and `lilypond-font-lock.el'. You should install these files somewhere in your LOAD-PATH. If you have installed a precompiled LilyPond package, these files can be found in `/usr/share/doc/lilypond-x.y.z/'. Add this to your `~/.emacs' or `~/.emacs.el', or install this file in Emacs' `site-start.d': ;;; lilypond-init.el --- Startup code for LilyPond mode (load-library "lilypond-mode.el") (setq auto-mode-alist (cons '("\\.ly$" . LilyPond-mode) auto-mode-alist)) (add-hook 'LilyPond-mode-hook (lambda () (turn-on-font-lock))) If you have the latest LilyPond-1.4.x Debian package, LilyPond-mode is automatically loaded, you not even need to modify your `~/.emacs' file. Compiling for distributions =========================== Red Hat Linux ------------- Red Hat 7.0 i386 RPMS are available from `ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/'. You can also compile them yourself. A spec file is in `make/out/lilypond.redhat.spec'. This file is distributed along with the sources. You can make the rpm by issuing tar xfz lilypond-x.y.z.tar.gz rpm -bb lilypond-x.y.z/make/out/lilypond.redhat.spec rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z For running on a Red Hat system you need these packages: guile, tetex, tetex-latex, tetex-dvips, libstdc++, python, ghostscript. For compilation on a Red Hat system you need these packages, in addition to the those needed for running: glibc-devel, gcc-c++, libstdc++-devel, guile-devel, flex, bison, texinfo, tetex-devel, groff, libgr-progs. LinuxPPC -------- Some LinuxPPC RPMS should available from `ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/'. A LinuxPPC RPM can be made using the `lilypond.redhat.spec' file. SuSE ---- Some SUSE RPMS should available from `ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE'. You can also compile a RPM for SUSE yourself. A spec file is in `make/out/lilypond.suse.spec', see the instructions for building the Red Hat RPM. You must have the following packages: guile tcsh tetex te_latex te_kpath te_mpost libpng python gpp libgpp gettext autoconf netpbm libnetpb gs_serv gs_lib gs_fonts guile Slackware --------- No precompiled packages for Slackware are available. Problems have been reported with Slackware 7.0; apparently, it ships with a faulty compiler. Do not compile LilyPond with -O2 on this platform. Mandrake -------- Some binaries are available at rpmfind.net. Refer to `http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/'. You can also compile a RPM for Mandrake yourself. A spec file is in `make/out/lilypond.mandrake.spec', see the instructions for building the Red Hat RPM. Debian GNU/Linux ---------------- A Debian package is also available. You may install it easily by running `apt-get' as root: apt-get install lilypond lilypond-doc You can also compile the .deb for Debian yourself, do: apt-get -b source lilypond If you're real impatient, you may even do: cd lilypond-x.y.z # a previous version uscan # download and build latest directly from upstream Debian's TeX installation is a bit short on memory, you may want to increase it like this: --- /etc/texmf/texmf.cnf.dpkg Sun Jan 28 14:12:14 2001 +++ /etc/texmf/texmf.cnf Fri Apr 27 11:09:35 2001 @ -384,8 +384,8 @ main_memory.context = 1500000 main_memory.mpost = 1000000 main_memory = 263000 % words of inimemory available; also applies to inimf&mp -extra_mem_top = 0 % extra high memory for chars, tokens, etc. -extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc. +extra_mem_top = 100000 % extra high memory for chars, tokens, etc. +extra_mem_bot = 100000 % extra low memory for boxes, glue, breakpoints, etc. obj_tab_size.context = 256000 You could also export `extra_mem_top' and `extra_mem_bot' as environment variables if you do not want to or cannot modify `/etc/texmf/texmf.cnf'. Alternatively, visit * http://packages.debian.org/lilypond (http://packages.debian.org/lilypond) * http://people.debian.org/~foka/lilypond/ (http://people.debian.org/~foka/lilypond/) for latest semi-unofficial build of LilyPond 1.4.2 for Debian 2.2 (potato) users. The official stable Debian 2.2 is stuck with the old LilyPond-1.3.24. Since LilyPond-1.4 has been released, the older lilypond1.3 Debian package is now obsolete. Please contact Anthony Fok for more information. The build scripts are in the subdirectory `debian/'; you can make the .deb by doing, for example: $ su - root # dpkg --purge lilypond lilypond1.3 # exit $ tar xzf lilypond-1.4.3.tar.gz $ cd lilypond-1.4.3 $ dch -p -v 1.4.3-0.local.1 "Local build." $ debuild -B $ su - root # dpkg -i ../lilypond_1.4.3*.deb # exit $ Use command `debuild' instead of `debuild -B' if you have a very fast machine and want to build the HTML, PS and DVI documentation too. For compilation on a Debian GNU/Linux system you need these packages, in addition to the those needed for running: * g++, cpp, libc6-dev, libstdc++-dev * libguile-dev * make, m4, flex, bison * gettext * groff, texinfo * tetex-base, tetex-bin, tetex-extra, libkpathsea-dev or tetex-dev * dpkg-dev, debhelper, fakeroot * gs, netpbm * pnmtopng (only in Debian 2.2; pnmtopng has been merged with netpbm in Debian testing/unstable.) Most of these are listed on the `Build-Depends' line in the `debian/control' file. To ensure the creation of the lilypond deb is trouble-free, we recommend that you first install the following packages by running \`apt-get' as root before building the package: For Debian 2.2: apt-get install task-debian-devel task-c++-dev \ python-base libguile6-dev tetex-bin tetex-dev \ tetex-extra flex bison texinfo groff gs \ netpbm pnmtopng m4 gettext For Debian in development ("unstable", the future 2.3 or 3.0): apt-get install binutils cpp gcc libc6-dev \ g++ libstdc++2.10-dev \ python-base libguile-dev tetex-bin libkpathsea-dev \ tetex-extra flex bison texinfo groff gs \ netpbm m4 gettext And, just so that old fonts from previous versions of LilyPond won't interfere with your build, you may want to do this before the build too: dpkg --purge lilypond lilypond1.3 Problems ======== For help and questions use . Please consult the FAQ before mailing your problems. If you find bugs, please send bug reports to . Bugs that are not fault of LilyPond are documented here. FLex-2.5.4a and gcc-3.0 ----------------------- Flex 2.5.4a does not produce g++-3.0 compliant C++ code. To compile LilyPond with gcc-3.0 you may do: CC=gcc-3.0 CXX=g++-3.0 ./configure --enable-config=gcc-3.0 make conf=gcc-3.0 -C lily out-gcc-3.0/lexer.cc patch -p1 < lexer-gcc-3.0.patch make conf=gcc-3.0 -C lily Note that this is fixed in Debian/unstable for flex >= 2.5.4a-13. Linux-2.4.0, Guile-1.4 -with-threads ------------------------------------ There's a bug in certain kernels around version 2.4.0, that is triggered when using Guile 1.4 compiled with pthreads. You'll see random segmentation fault crashes of LilyPond. Upgrade to a newer version of Linux. If you can't do that, you may try to recompiling Guile without threads (YMMV): guile-1.4$ ./configure --without-threads; make all install NetBSD ------ * The flex precompiled in NetBSD-1.4.2 is broken. Download flex-2.5.4a, build, install. * The configuration of Gcc (egcs-2.91.60 19981201 (egcs-1.1.1 release)) does not include `/usr/pkg' paths. Configure using: CFLAGS='-I /usr/pkg/include' LDFLAGS='-L/usr/pkg/lib' ./configure Solaris: -------- * Sparc64/Solaris 2.6, GNU make-3.77 GNU make-3.77 is buggy on this platform, upgrade to 3.78.1 or newer. * Sparc64/Solaris 2.6, ld Not yet resolved. AIX --- * AIX 4.3 ld The following is from the gcc install/SPECIFIC file. Some versions of the AIX binder (linker) can fail with a relocation overflow severe error when the -bbigtoc option is used to link GCC-produced object files into an executable that overflows the TOC. A fix for APAR IX75823 (OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC) is available from IBM Customer Support and from its 27service.boulder.ibm.com website as PTF U455193. Binutils does not support AIX 4.3 (at least through release 2.9). GNU as and GNU ld will not work properly and one should not configure GCC to use those GNU utilities. Use the native AIX tools which do interoperate with GCC. add -Wl,-bbigtoc to USER_LDFLAGS, ie: LDFLAGS='-Wl,-bbigtoc' ./configure