--- /dev/null
+#include <avr/io.h>
+#include "duck_led.h"
+#include "quantum.h"
+
+void show(void) {
+ wait_us((RES / 1000UL) + 1);
+}
--- /dev/null
+#pragma once
+
+#define RES 6000
+
+#define NS_PER_SEC (1000000000L)
+#define CYCLES_PER_SEC (F_CPU)
+#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
+#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
+
+enum Device {
+ Device_PCBRGB,
+ Device_STATUSLED
+};
+
+void show(void);
+
Make example for this keyboard (after setting up your build environment):
make duck/eagle_viper/v2:default
-
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
#include "config_common.h"
#define RGB_DI_PIN D6
#define RGBLED_NUM 17
+/* Set to top left most key */
+#define BOOTMAGIC_LITE_ROW 4
+#define BOOTMAGIC_LITE_COLUMN 10
+
#define TAPPING_TERM 200
-#endif
#include <stdbool.h>
#include <util/delay.h>
#include "indicator_leds.h"
-
-#define RES 6000
+#include "duck_led/duck_led.h"
#define LED_T1H 600
#define LED_T1L 650
#define LED_T0H 250
#define LED_T0L 1000
-#define NS_PER_SEC (1000000000L)
-#define CYCLES_PER_SEC (F_CPU)
-#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
-#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
-
void send_bit_d4(bool bitVal) {
if(bitVal) {
asm volatile (
}
}
-void show(void) {
- _delay_us((RES / 1000UL) + 1);
-}
-
-void send_value(uint8_t byte) {
+void send_value(uint8_t byte, enum Device device) {
for(uint8_t b = 0; b < 8; b++) {
- send_bit_d4(byte & 0b10000000);
- byte <<= 1;
+ if(device == Device_STATUSLED) {
+ send_bit_d4(byte & 0b10000000);
+ byte <<= 1;
+ }
}
}
cli();
for(led_cnt = 0; led_cnt < 8; led_cnt++)
- send_value(leds[led_cnt] ? 255 : 0);
+ send_value(leds[led_cnt] ? 255 : 0, Device_STATUSLED);
sei();
show();
}
+
void indicator_leds_set(bool leds[8]);
-void show(void);
bool curr_bit = rows & (1<<row);
if (prev_bit != curr_bit) {
matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ if (debouncing) {
+ dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
+ }
debouncing = DEBOUNCING_DELAY;
}
}
make eagle_viper/v2:default
+**Reset Key:** To put the Eagle/Viper V2 into reset, hold caps lock key (`K2A`) while plugging in.
+
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
## Hardware Notes
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE ?= no # Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RGBLIGHT_ENABLE = yes
CUSTOM_MATRIX = yes
SRC += indicator_leds.c \
- matrix.c
+ matrix.c duck_led/duck_led.c
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef V2_H
-#define V2_H
+#pragma once
#include "quantum.h"
#define LAYOUT_eagle LAYOUT_60_ansi
-#endif
+++ /dev/null
-/*
-Copyright 2016 Ralf Schmitt <ralf@bunkertor.net>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <stdbool.h>
-#include <util/delay.h>
-#include <stdint.h>
-#include "backlight_led.h"
-#include "quantum.h"
-// #include "led.h"
-
-
-#define T1H 900
-#define T1L 600
-#define T0H 400
-#define T0L 900
-#define RES 6000
-
-#define NS_PER_SEC (1000000000L)
-#define CYCLES_PER_SEC (F_CPU)
-#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
-#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
-
-void send_bit_d4(bool bitVal)
-{
- if(bitVal) {
- asm volatile (
- "sbi %[port], %[bit] \n\t"
- ".rept %[onCycles] \n\t"
- "nop \n\t"
- ".endr \n\t"
- "cbi %[port], %[bit] \n\t"
- ".rept %[offCycles] \n\t"
- "nop \n\t"
- ".endr \n\t"
- ::
- [port] "I" (_SFR_IO_ADDR(PORTD)),
- [bit] "I" (4),
- [onCycles] "I" (NS_TO_CYCLES(T1H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
- } else {
- asm volatile (
- "sbi %[port], %[bit] \n\t"
- ".rept %[onCycles] \n\t"
- "nop \n\t"
- ".endr \n\t"
- "cbi %[port], %[bit] \n\t"
- ".rept %[offCycles] \n\t"
- "nop \n\t"
- ".endr \n\t"
- ::
- [port] "I" (_SFR_IO_ADDR(PORTD)),
- [bit] "I" (4),
- [onCycles] "I" (NS_TO_CYCLES(T0H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
- }
-}
-
-void send_bit_d6(bool bitVal)
-{
- if(bitVal) {
- asm volatile (
- "sbi %[port], %[bit] \n\t"
- ".rept %[onCycles] \n\t"
- "nop \n\t"
- ".endr \n\t"
- "cbi %[port], %[bit] \n\t"
- ".rept %[offCycles] \n\t"
- "nop \n\t"
- ".endr \n\t"
- ::
- [port] "I" (_SFR_IO_ADDR(PORTD)),
- [bit] "I" (6),
- [onCycles] "I" (NS_TO_CYCLES(T1H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
- } else {
- asm volatile (
- "sbi %[port], %[bit] \n\t"
- ".rept %[onCycles] \n\t"
- "nop \n\t"
- ".endr \n\t"
- "cbi %[port], %[bit] \n\t"
- ".rept %[offCycles] \n\t"
- "nop \n\t"
- ".endr \n\t"
- ::
- [port] "I" (_SFR_IO_ADDR(PORTD)),
- [bit] "I" (6),
- [onCycles] "I" (NS_TO_CYCLES(T0H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
- }
-}
-
-void show(void)
-{
- _delay_us((RES / 1000UL) + 1);
-}
-
-void send_value(uint8_t byte, enum Device device)
-{
- for(uint8_t b = 0; b < 8; b++) {
- if(device == Device_STATELED) {
- send_bit_d4(byte & 0b10000000);
- }
- if(device == Device_PCBRGB) {
- send_bit_d6(byte & 0b10000000);
- }
- byte <<= 1;
- }
-}
-
-void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device)
-{
- send_value(g, device);
- send_value(r, device);
- send_value(b, device);
-}
+++ /dev/null
-#ifndef BACKLIGHT_LED_H
-#define BACKLIGHT_LED_H
-
-enum Device {
- Device_PCBRGB,
- Device_STATELED
-};
-
-void backlight_init_ports(void);
-void backlight_set_state(bool cfg[7]);
-void backlight_update_state(void);
-void backlight_toggle_rgb(bool enabled);
-void backlight_set_rgb(uint8_t cfg[17][3]);
-void backlight_set(uint8_t level);
-void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device);
-void show(void);
-
-#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
+/* Set to top left most key */
+#define BOOTMAGIC_LITE_ROW 5
+#define BOOTMAGIC_LITE_COLUMN 10
+
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
--- /dev/null
+/*
+Copyright 2016 Ralf Schmitt <ralf@bunkertor.net>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <stdbool.h>
+#include <util/delay.h>
+#include <stdint.h>
+#include "indicator_leds.h"
+#include "quantum.h"
+
+#define LED_T1H 900
+#define LED_T1L 600
+#define LED_T0H 400
+#define LED_T0L 900
+
+void send_bit_d4(bool bitVal)
+{
+ if(bitVal) {
+ asm volatile (
+ "sbi %[port], %[bit] \n\t"
+ ".rept %[onCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ "cbi %[port], %[bit] \n\t"
+ ".rept %[offCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ ::
+ [port] "I" (_SFR_IO_ADDR(PORTD)),
+ [bit] "I" (4),
+ [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
+ } else {
+ asm volatile (
+ "sbi %[port], %[bit] \n\t"
+ ".rept %[onCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ "cbi %[port], %[bit] \n\t"
+ ".rept %[offCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ ::
+ [port] "I" (_SFR_IO_ADDR(PORTD)),
+ [bit] "I" (4),
+ [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
+ }
+}
+
+void send_bit_d6(bool bitVal)
+{
+ if(bitVal) {
+ asm volatile (
+ "sbi %[port], %[bit] \n\t"
+ ".rept %[onCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ "cbi %[port], %[bit] \n\t"
+ ".rept %[offCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ ::
+ [port] "I" (_SFR_IO_ADDR(PORTD)),
+ [bit] "I" (6),
+ [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
+ } else {
+ asm volatile (
+ "sbi %[port], %[bit] \n\t"
+ ".rept %[onCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ "cbi %[port], %[bit] \n\t"
+ ".rept %[offCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ ::
+ [port] "I" (_SFR_IO_ADDR(PORTD)),
+ [bit] "I" (6),
+ [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
+ }
+}
+
+void send_value(uint8_t byte, enum Device device)
+{
+ for(uint8_t b = 0; b < 8; b++) {
+ if(device == Device_STATUSLED) {
+ send_bit_d4(byte & 0b10000000);
+ }
+ if(device == Device_PCBRGB) {
+ send_bit_d6(byte & 0b10000000);
+ }
+ byte <<= 1;
+ }
+}
+
+void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device)
+{
+ send_value(r, device);
+ send_value(g, device);
+ send_value(b, device);
+}
--- /dev/null
+#pragma once
+
+#include "duck_led/duck_led.h"
+
+void backlight_init_ports(void);
+void backlight_set_state(bool cfg[7]);
+void backlight_update_state(void);
+void backlight_toggle_rgb(bool enabled);
+void backlight_set_rgb(uint8_t cfg[17][3]);
+void backlight_set(uint8_t level);
+void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device);
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "jetfire.h"
-#include "backlight_led.h"
+#include "indicator_leds.h"
-enum backlight_level {
+enum BACKLIGHT_AREAS {
BACKLIGHT_ALPHA = 0b0000001,
BACKLIGHT_MOD = 0b0000010,
BACKLIGHT_FROW = 0b0000100,
send_color(backlight_state_led & (1<<STATE_LED_SCROLL_LOCK) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_CAPS_LOCK) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_NUM_LOCK) ? 255 : 0,
- Device_STATELED);
+ Device_STATUSLED);
send_color(backlight_state_led & (1<<STATE_LED_LAYER_1) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_LAYER_2) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_LAYER_0) ? 255 : 0,
- Device_STATELED);
+ Device_STATUSLED);
send_color(backlight_state_led & (1<<STATE_LED_LAYER_4) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_LAYER_3) ? 255 : 0,
0,
- Device_STATELED);
+ Device_STATUSLED);
sei();
show();
}
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef JETFIRE_H
-#define JETFIRE_H
+#pragma once
#include "quantum.h"
{ K0A, K0B, K0C, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, K0I, KC_NO,KC_NO,KC_NO, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, KC_NO } \
}
-#endif
Hardware Supported: Duck Jetfire PCB
Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=92708.0)
-To get into bootloader mode, hold the top top most key above the 2 navigation keys while connecting the USB cable.
+**Reset Key:** To put the Jetfire into reset, hold top most key above the 2 navigation keys (`K5P`) while plugging in.
Make example for this keyboard (after setting up your build environment):
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
CUSTOM_MATRIX = yes
-SRC += backlight_led.c \
- matrix.c
+SRC += indicator_leds.c \
+ matrix.c duck_led/duck_led.c
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
#include "config_common.h"
#define RGB_DI_PIN D6
#define RGBLED_NUM 17
+/* Set to top left most key */
+#define BOOTMAGIC_LITE_ROW 5
+#define BOOTMAGIC_LITE_COLUMN 10
+
#define TAPPING_TERM 200
-#endif
#include <avr/io.h>
#include <stdbool.h>
#include <util/delay.h>
+#include "duck_led/duck_led.h"
-#define T1H 900
-#define T1L 600
-#define T0H 400
-#define T0L 900
-#define RES 6000
-
-#define NS_PER_SEC (1000000000L)
-#define CYCLES_PER_SEC (F_CPU)
-#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
-#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
+#define LED_T1H 900
+#define LED_T1L 600
+#define LED_T0H 400
+#define LED_T0L 900
void send_bit_d4(bool bitVal) {
if(bitVal) {
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (4),
- [onCycles] "I" (NS_TO_CYCLES(T1H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
+ [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
} else {
asm volatile (
"sbi %[port], %[bit] \n\t"
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (4),
- [onCycles] "I" (NS_TO_CYCLES(T0H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
+ [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
}
}
-void show(void) {
- _delay_us((RES / 1000UL) + 1);
-}
-
-void send_value(uint8_t byte) {
+void send_value(uint8_t byte, enum Device device) {
for(uint8_t b = 0; b < 8; b++) {
- send_bit_d4(byte & 0b10000000);
- byte <<= 1;
+ if(device == Device_STATUSLED) {
+ send_bit_d4(byte & 0b10000000);
+ byte <<= 1;
+ }
}
}
-void send_color(uint8_t r, uint8_t g, uint8_t b) {
- send_value(g);
- send_value(r);
- send_value(b);
+void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device) {
+ send_value(r, device);
+ send_value(g, device);
+ send_value(b, device);
}
void indicator_leds_set(bool leds[8]) {
cli();
- send_color(leds[1] ? 255 : 0, leds[2] ? 255 : 0, leds[0] ? 255 : 0);
- send_color(leds[4] ? 255 : 0, leds[5] ? 255 : 0, leds[3] ? 255 : 0);
- send_color(leds[6] ? 255 : 0, leds[7] ? 255 : 0, 0);
+ send_color(leds[1] ? 255 : 0, leds[2] ? 255 : 0, leds[0] ? 255 : 0, Device_STATUSLED);
+ send_color(leds[4] ? 255 : 0, leds[5] ? 255 : 0, leds[3] ? 255 : 0, Device_STATUSLED);
+ send_color(leds[6] ? 255 : 0, leds[7] ? 255 : 0, 0, Device_STATUSLED);
sei();
show();
}
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef LIGHTSAVER_H
-#define LIGHTSAVER_H
+#pragma once
#include "quantum.h"
/* 5 */ { K0A, K0B, K0C, NO, NO, NO, NO, NO, K0I, NO, K0K, NO, K0M, K0N, K0O, K0P, K0Q, K0R } \
}
-#endif
bool curr_bit = rows & (1<<row);
if (prev_bit != curr_bit) {
matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ if (debouncing) {
+ dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
+ }
debouncing = DEBOUNCING_DELAY;
}
}
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= no # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE ?= no # Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RGBLIGHT_ENABLE = yes
CUSTOM_MATRIX = yes
SRC += indicator_leds.c \
- matrix.c
+ matrix.c duck_led/duck_led.c
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
#include "config_common.h"
#define RGB_DI_PIN D6
#define RGBLED_NUM 17
-#define TAPPING_TERM 200
+/* Set to top left most key */
+#define BOOTMAGIC_LITE_ROW 5
+#define BOOTMAGIC_LITE_COLUMN 10
-#endif
+#define TAPPING_TERM 200
bool curr_bit = rows & (1<<row);
if (prev_bit != curr_bit) {
matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ if (debouncing) {
+ dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
+ }
debouncing = DEBOUNCING_DELAY;
}
}
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= no # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE ?= no # Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RGBLIGHT_ENABLE = yes
CUSTOM_MATRIX = yes
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef V1_H
-#define V1_H
+#pragma once
#include "quantum.h"
{ K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, KC_NO, K1M, K1N, KC_NO, K1P }, \
{ K0A, K0B, K0C, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, K0K, K0L, KC_NO, K0M, K0N, KC_NO, K0P } \
}
-#endif
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
#include "config_common.h"
#define RGB_DI_PIN D6
#define RGBLED_NUM 17
+/* Set to top left most key */
+#define BOOTMAGIC_LITE_ROW 5
+#define BOOTMAGIC_LITE_COLUMN 10
+
#define TAPPING_TERM 200
-#endif
#include <util/delay.h>
#include "indicator_leds.h"
-#define T1H 900
-#define T1L 600
-#define T0H 400
-#define T0L 900
-#define RES 6000
-
-#define NS_PER_SEC (1000000000L)
-#define CYCLES_PER_SEC (F_CPU)
-#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
-#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
+#define LED_T1H 900
+#define LED_T1L 600
+#define LED_T0H 400
+#define LED_T0L 900
void send_bit_d4(bool bitVal) {
if(bitVal) {
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (4),
- [onCycles] "I" (NS_TO_CYCLES(T1H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
+ [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
} else {
asm volatile (
"sbi %[port], %[bit] \n\t"
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (4),
- [onCycles] "I" (NS_TO_CYCLES(T0H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
+ [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
}
}
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (6),
- [onCycles] "I" (NS_TO_CYCLES(T1H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
+ [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
} else {
asm volatile (
"sbi %[port], %[bit] \n\t"
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (6),
- [onCycles] "I" (NS_TO_CYCLES(T0H) - 2),
- [offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
+ [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
}
}
-void show(void) {
- _delay_us((RES / 1000UL) + 1);
-}
-
void send_value(uint8_t byte, enum Device device) {
for(uint8_t b = 0; b < 8; b++) {
if(device == Device_STATUSLED) {
}
void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device) {
- send_value(g, device);
send_value(r, device);
+ send_value(g, device);
send_value(b, device);
}
-enum Device {
- Device_PCBRGB,
- Device_STATUSLED
-};
+#include "duck_led/duck_led.h"
void indicator_leds_set(bool leds[8]);
void backlight_toggle_rgb(bool enabled);
void backlight_set_rgb(uint8_t cfg[17][3]);
void backlight_init_ports(void);
void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device);
-void show(void);
\ No newline at end of file
bool curr_bit = rows & (1<<row);
if (prev_bit != curr_bit) {
matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ if (debouncing) {
+ dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
+ }
debouncing = DEBOUNCING_DELAY;
}
}
make octagon/v2:default
+**Reset Key:** To put the Octagon V2 into reset, hold the top right most key (`K5Q`) while plugging in.
+
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
## Hardware Notes
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= no # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE ?= no # Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RGBLIGHT_ENABLE = yes
CUSTOM_MATRIX = yes
SRC += indicator_leds.c \
- matrix.c
+ matrix.c duck_led/duck_led.c
LAYOUTS = 75_ansi
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef V2_H
-#define V2_H
+#pragma once
#include "quantum.h"
{ K1A, KC_NO, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, KC_NO, K1M, K1N, K1O, K1P, KC_NO }, \
{ K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J, KC_NO, K0K, K0L, K0M, K0N, K0O, K0P, KC_NO } \
}
-#endif