- MAKEFLAGS="-j3 --output-sync"
services:
- docker
-before_install:
- - docker build -t qmkfm/qmk_firmware .
install:
- npm install -g moxygen
script:
-FROM debian:9
-
-RUN apt-get update && apt-get install --no-install-recommends -y \
- avr-libc \
- avrdude \
- binutils-arm-none-eabi \
- binutils-avr \
- build-essential \
- dfu-programmer \
- dfu-util \
- gcc \
- gcc-avr \
- git \
- libnewlib-arm-none-eabi \
- software-properties-common \
- unzip \
- wget \
- zip \
- && rm -rf /var/lib/apt/lists/*
-
-# upgrade gcc-arm-none-eabi from the default 5.4.1 to 6.3.1 due to ARM runtime issues
-RUN wget -q https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2/gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz2 -O - | \
- tar xj --strip-components=1 -C /
+FROM qmkfm/base_container
VOLUME /qmk_firmware
WORKDIR /qmk_firmware
+/* Copyright (C) 2019 Elia Ritterbusch
+ +
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
/* Library made by: g4lvanix
* Github repository: https://github.com/g4lvanix/I2C-master-lib
*/
+/* Copyright (C) 2019 Elia Ritterbusch
+ +
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
/* Library made by: g4lvanix
* Github repository: https://github.com/g4lvanix/I2C-master-lib
*/
+/* Copyright (C) 2019 Elia Ritterbusch
+ +
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
/* Library made by: g4lvanix
* Github repository: https://github.com/g4lvanix/I2C-slave-lib
*/
// Reset i2c state machine to be ready for next interrupt
TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN);
-}
\ No newline at end of file
+}
+/* Copyright (C) 2019 Elia Ritterbusch
+ +
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
/* Library made by: g4lvanix
* Github repository: https://github.com/g4lvanix/I2C-slave-lib
void i2c_slave_init(uint8_t address);
void i2c_slave_stop(void);
-#endif // I2C_SLAVE_H
\ No newline at end of file
+#endif // I2C_SLAVE_H
--- /dev/null
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "angel64.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
+
+*/
--- /dev/null
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, \
+ k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, \
+ k28, k29, k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, \
+ k41, k42, k43, k44, k45, k46, k47, k48, k49, k50, k51, k52, k53, \
+ k54, k55, k56, k57, k58, k59, k60, k61, k62, k63, k64\
+) \
+{ \
+ { k01, k13, k25, k37, k49, k61 }, \
+ { k02, k14, k26, k38, k50, k62 }, \
+ { k03, k15, k27, k39, k51, k63 }, \
+ { k04, k16, k28, k40, k52, k64 }, \
+ { k05, k17, k29, k41, k53, KC_NO }, \
+ { k06, k18, k30, k42, k54, KC_NO }, \
+ { k07, k19, k31, k43, k55, KC_NO }, \
+ { k08, k20, k32, k44, k56, KC_NO }, \
+ { k09, k21, k33, k45, k57, KC_NO }, \
+ { k10, k22, k34, k46, k58, KC_NO }, \
+ { k11, k23, k35, k47, k59, KC_NO }, \
+ { k12, k24, k36, k48, k60, KC_NO } \
+}
--- /dev/null
+/*
+Copyright 2019 kakunpc
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER kakunpc
+#define PRODUCT angel64
+#define DESCRIPTION A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
+#define UNUSED_PINS
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLED_NUM 64
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
--- /dev/null
+{
+ "keyboard_name": "angel64",
+ "url": "https://kakunpc.booth.pm/",
+ "maintainer": "kakunpc",
+ "width": 14,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"back", "x":13, "y":0}, {"label":"Q", "x":0, "y":1, "w":1.5}, {"label":"W", "x":1.5, "y":1}, {"label":"E", "x":2.5, "y":1}, {"label":"R", "x":3.5, "y":1}, {"label":"T", "x":4.5, "y":1}, {"label":"Y", "x":5.5, "y":1}, {"label":"U", "x":6.5, "y":1}, {"label":"I", "x":7.5, "y":1}, {"label":"O", "x":8.5, "y":1}, {"label":"P", "x":9.5, "y":1}, {"label":"[", "x":10.5, "y":1}, {"label":"]", "x":11.5, "y":1}, {"label":"|", "x":12.5, "y":1, "w":1.5}, {"label":"Ctrl", "x":0, "y":2}, {"label":"A", "x":1, "y":2}, {"label":"S", "x":2, "y":2}, {"label":"D", "x":3, "y":2}, {"label":"F", "x":4, "y":2}, {"label":"G", "x":5, "y":2}, {"label":"H", "x":6, "y":2}, {"label":"J", "x":7, "y":2}, {"label":"K", "x":8, "y":2}, {"label":"L", "x":9, "y":2}, {"label":";:", "x":10, "y":2}, {"label":"`", "x":11, "y":2}, {"label":"Enter", "x":12, "y":2, "w":2}, {"label":"Shift", "x":0, "y":3, "w":1.5}, {"label":"Z", "x":1.5, "y":3}, {"label":"X", "x":2.5, "y":3}, {"label":"C", "x":3.5, "y":3}, {"label":"V", "x":4.5, "y":3}, {"label":"B", "x":5.5, "y":3}, {"label":"N", "x":6.5, "y":3}, {"label":"M", "x":7.5, "y":3}, {"label":"<", "x":8.5, "y":3}, {"label":">", "x":9.5, "y":3}, {"label":"?", "x":10.5, "y":3}, {"label":"\u2191", "x":11.5, "y":3}, {"label":"Fn", "x":12.5, "y":3, "w":1.5}, {"label":"Caps", "x":0, "y":4}, {"label":"Alt", "x":1, "y":4}, {"label":"Start", "x":2, "y":4, "w":1.5}, {"label":"Ctrl", "x":3.5, "y":4, "w":1.5}, {"label":"Space", "x":5, "y":4, "w":2}, {"label":"Ctrl", "x":7, "y":4, "w":1.5}, {"label":"Alt", "x":8.5, "y":4, "w":1.5}, {"label":"\u2190", "x":10, "y":4}, {"label":"\u2193", "x":11, "y":4}, {"label":"\u2192", "x":12, "y":4}, {"label":"Alt", "x":13, "y":4}]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layers{
+ BASE = 0,
+ COMMAND
+};
+
+#define KC_COMMAND LT(COMMAND,KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [BASE] = LAYOUT(
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC ,
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT,
+ KC_LCTL, KC_LALT, KC_LGUI, KC_COMMAND, KC_SPC, KC_COMMAND, KC_CAPS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_DEL
+ ),
+ [COMMAND] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC ,
+ KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+ KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
+
+void keyboard_post_init_user(void) {
+}
--- /dev/null
+# The default keymap for angel64
\ No newline at end of file
--- /dev/null
+/*
+Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "debounce.h"
+#include "quantum.h"
+
+#if (MATRIX_COLS <= 8)
+# define print_matrix_header() print("\nr/c 01234567\n")
+# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop(matrix[i])
+# define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
+# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop16(matrix[i])
+# define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop32(matrix[i])
+# define ROW_SHIFTER ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+ extern const matrix_row_t matrix_mask[];
+#endif
+
+static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values
+static matrix_row_t matrix[MATRIX_ROWS]; //debounced values
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+ matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+ matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+ return MATRIX_COLS;
+}
+
+//Deprecated.
+bool matrix_is_modified(void)
+{
+ if (debounce_active()) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+ // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+ return matrix[row] & matrix_mask[row];
+#else
+ return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+ print_matrix_header();
+
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ print_matrix_row(row);
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += matrix_bitpop(i);
+ }
+ return count;
+}
+
+static void select_row(uint8_t row)
+{
+ setPinOutput(row_pins[row]);
+ writePinLow(row_pins[row]);
+}
+
+static void unselect_row(uint8_t row)
+{
+ setPinInputHigh(row_pins[row]);
+}
+
+static void unselect_rows(void)
+{
+ for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+ setPinInputHigh(row_pins[x]);
+ }
+}
+
+static void select_col(uint8_t col)
+{
+ setPinOutput(col_pins[col]);
+ writePinLow(col_pins[col]);
+}
+
+static void unselect_col(uint8_t col)
+{
+ setPinInputHigh(col_pins[col]);
+}
+
+static void unselect_cols(void)
+{
+ for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+ setPinInputHigh(col_pins[x]);
+ }
+}
+
+static void init_pins(void) {
+ unselect_rows();
+ unselect_cols();
+ for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+ setPinInputHigh(col_pins[x]);
+ }
+ for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+ setPinInputHigh(row_pins[x]);
+ }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[current_row];
+
+ // Clear data in matrix row
+ current_matrix[current_row] = 0;
+
+ // Select row and wait for row selecton to stabilize
+ select_row(current_row);
+ wait_us(30);
+
+ // For each col...
+ for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+ // Select the col pin to read (active low)
+ uint8_t pin_state = readPin(col_pins[col_index]);
+
+ // Populate the matrix row with the state of the col pin
+ current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
+ }
+
+ // Unselect row
+ unselect_row(current_row);
+
+ return (last_row_value != current_matrix[current_row]);
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+ bool matrix_changed = false;
+
+ // Select col and wait for col selecton to stabilize
+ select_col(current_col);
+ wait_us(30);
+
+ // For each row...
+ for(uint8_t row_index = 0; row_index < MATRIX_ROWS/2; row_index++)
+ {
+ uint8_t tmp = row_index + MATRIX_ROWS/2;
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[tmp];
+
+ // Check row pin state
+ if (readPin(row_pins[row_index]) == 0)
+ {
+ // Pin LO, set col bit
+ current_matrix[tmp] |= (ROW_SHIFTER << current_col);
+ }
+ else
+ {
+ // Pin HI, clear col bit
+ current_matrix[tmp] &= ~(ROW_SHIFTER << current_col);
+ }
+
+ // Determine if the matrix changed state
+ if ((last_row_value != current_matrix[tmp]) && !(matrix_changed))
+ {
+ matrix_changed = true;
+ }
+ }
+
+ // Unselect col
+ unselect_col(current_col);
+
+ return matrix_changed;
+}
+
+void matrix_init(void) {
+
+ // initialize key pins
+ init_pins();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ raw_matrix[i] = 0;
+ matrix[i] = 0;
+ }
+
+ debounce_init(MATRIX_ROWS);
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+ bool changed = false;
+
+ // Set row, read cols
+ for (uint8_t current_row = 0; current_row < MATRIX_ROWS / 2; current_row++) {
+ changed |= read_cols_on_row(raw_matrix, current_row);
+ }
+ //else
+ // Set col, read rows
+ for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+ changed |= read_rows_on_col(raw_matrix, current_col);
+ }
+
+ debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+
+ matrix_scan_quantum();
+ return (uint8_t)changed;
+}
--- /dev/null
+# angel64
+
+
+
+Keyboard for tablets.
+
+Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)
+Hardware Supported: angel64_alpha, promicro
+Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/))
+
+Make example for this keyboard (after setting up your build environment):
+
+ make angel64:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+CUSTOM_MATRIX = yes
+
+SRC += matrix.c
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x1337
+#define PRODUCT_ID 0x6012
+#define MANUFACTURER Maple Computing
+#define PRODUCT Ivy
+#define DESCRIPTION A 3 key macro pad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define BACKLIGHT_PIN D2
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
--- /dev/null
+#include "ivy.h"
--- /dev/null
+#pragma once
+
+#ifdef KEYBOARD_ivy_rev1
+ #include "rev1.h"
+#endif
+
+#include "quantum.h"
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum pad_layers {
+ _L1,
+ _FUNC
+};
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Layer 1
+ * ,------.
+ * | 1 |
+ * |------|
+ * | 2 |
+ * |------|
+ * | FN |
+ * `------'
+ */
+[_L1] = LAYOUT( \
+ KC_1, \
+ KC_2, \
+ MO(_FUNC) \
+),
+
+[_FUNC] = LAYOUT( \
+ CALTDEL, \
+ TSKMGR, \
+ _______ \
+)
+
+};
+
+void matrix_init_user(void) {
+
+}
--- /dev/null
+
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
--- /dev/null
+IVY
+===
+
+
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ivy/rev1:default
+
+Install examples:
+
+ make ivy/rev1:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define DEVICE_VER 0x0001
+
+/* Let's Macro V2 pin-out */
+#define MATRIX_ROW_PINS { F1, B2, D3 }
+#define MATRIX_COL_PINS { F5, B3, D5 }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
--- /dev/null
+#include "ivy.h"
+
+void matrix_init_kb(void) {
+ matrix_init_user();
+};
--- /dev/null
+#pragma once
+
+#include "ivy.h"
+
+#define LAYOUT( \
+ K00, \
+ K01, \
+ K02 \
+ ) \
+ { \
+ { K00, KC_NO, KC_NO }, \
+ { KC_NO, K01, KC_NO }, \
+ { KC_NO, KC_NO, K02 }, \
+ }
--- /dev/null
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = no
+AUDIO_ENABLE = no
\ No newline at end of file
--- /dev/null
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+DEFAULT_FOLDER = ivy/rev1
\ No newline at end of file
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
/* Colemak
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Esc | A | R | S | T | D | H | N | E | I | O | " |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
/* Dvorak
* ,-----------------------------------------------------------------------------------.
* | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Esc | A | O | E | U | I | D | H | T | N | S | / |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
/* Lower
* ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
/* Raise
* ,-----------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
/* Plover layer (http://opensteno.org)
* ,-----------------------------------------------------------------------------------.
* | # | # | # | # | # | # | # | # | # | # | # | # |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | S | T | P | H | * | * | F | P | L | T | D |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | S | K | W | R | * | * | R | B | G | S | Z |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Exit | | | A | O | | E | U | | | |
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset| | | | | | | | | | Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
* | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* [TheVan 44](/keyboards/tv44) — A 44-key staggered keybard by Evangs.
* [WhiteFox](/keyboards/whitefox) — A 65% keyboard designed as a partnership by matt3o, Massdrop and Input Club
* [Vision Division](/keyboards/vision_division) — Full Size / Split Linear Keyboard by IBNobody.
+* [XD004](/keyboards/xd004) — 1x4 macro keyboard sold by KPrepublic.
* [XD75](/keyboards/xd75) — 15x5 ortholinear keyboard by XIUDI.
* [YMDK NP21](/keyboards/ymdk_np21) — ps2avrGB based number pad (numpad) sold by YMDK on Aliexpress.
--- /dev/null
+/*
+Copyright 2019 T.Shinohara
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER T.Shinohara
+#define PRODUCT Shiro
+#define DESCRIPTION A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
--- /dev/null
+{
+ "keyboard_name": "Shiro",
+ "url": "https://github.com/ShinoharaTa/keyboards/blob/master/Shiro/manual/build_guide_ja.md",
+ "maintainer": "T.Shinohara",
+ "width": 3,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 15,
+ "layout": [
+ {
+ "x": 0,
+ "y": 0
+ },
+ {
+ "x": 1,
+ "y": 0
+ },
+ {
+ "x": 2,
+ "y": 0
+ },
+ {
+ "x": 3,
+ "y": 0
+ },
+ {
+ "x": 4,
+ "y": 0
+ },
+ {
+ "x": 0,
+ "y": 1
+ },
+ {
+ "x": 1,
+ "y": 1
+ },
+ {
+ "x": 2,
+ "y": 1
+ },
+ {
+ "x": 3,
+ "y": 1
+ },
+ {
+ "x": 4,
+ "y": 1
+ },
+ {
+ "x": 0,
+ "y": 2
+ },
+ {
+ "x": 1,
+ "y": 2
+ },
+ {
+ "x": 2,
+ "y": 2
+ },
+ {
+ "x": 3,
+ "y": 2
+ },
+ {
+ "x": 4,
+ "y": 2
+ },
+ {
+ "x": 0,
+ "y": 3
+ },
+ {
+ "x": 1,
+ "y": 3
+ },
+ {
+ "x": 2,
+ "y": 3
+ },
+ {
+ "x": 3,
+ "y": 3
+ },
+ {
+ "x": 4,
+ "y": 3
+ },
+ {
+ "x": 0,
+ "y": 4
+ },
+ {
+ "x": 1,
+ "y": 4
+ },
+ {
+ "x": 2,
+ "y": 4
+ },
+ {
+ "x": 3,
+ "y": 4
+ },
+ {
+ "x": 4,
+ "y": 4
+ }
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 T.Shinohara
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+/* Copyright 2019 T.Shinohara
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+ TEST_A1 = SAFE_RANGE,
+ TEST_A2,
+ TEST_A3,
+ TEST_B1,
+ TEST_B2,
+ TEST_B3,
+ TEST_C1,
+ TEST_C2,
+ TEST_C3,
+ TEST_D1,
+ TEST_D2,
+ TEST_D3,
+ TEST_E1,
+ TEST_E2,
+ TEST_E3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT( /* Base */
+ TEST_A1, TEST_A2, TEST_A3,
+ TEST_B1, TEST_B2, TEST_B3,
+ TEST_C1, TEST_C2, TEST_C3,
+ TEST_D1, TEST_D2, TEST_D3,
+ TEST_E1, TEST_E2, TEST_E3
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case TEST_A1: if(record->event.pressed){ SEND_STRING("A1"); } break;
+ case TEST_A2: if(record->event.pressed){ SEND_STRING("A2"); } break;
+ case TEST_A3: if(record->event.pressed){ SEND_STRING("A3"); } break;
+ case TEST_B1: if(record->event.pressed){ SEND_STRING("B1"); } break;
+ case TEST_B2: if(record->event.pressed){ SEND_STRING("B2"); } break;
+ case TEST_B3: if(record->event.pressed){ SEND_STRING("B3"); } break;
+ case TEST_C1: if(record->event.pressed){ SEND_STRING("C1"); } break;
+ case TEST_C2: if(record->event.pressed){ SEND_STRING("C2"); } break;
+ case TEST_C3: if(record->event.pressed){ SEND_STRING("C3"); } break;
+ case TEST_D1: if(record->event.pressed){ SEND_STRING("D1"); } break;
+ case TEST_D2: if(record->event.pressed){ SEND_STRING("D2"); } break;
+ case TEST_D3: if(record->event.pressed){ SEND_STRING("D3"); } break;
+ case TEST_E1: if(record->event.pressed){ SEND_STRING("E1"); } break;
+ case TEST_E2: if(record->event.pressed){ SEND_STRING("E2"); } break;
+ case TEST_E3: if(record->event.pressed){ SEND_STRING("E3"); } break;
+ }
+ return true;
+}
--- /dev/null
+# The default keymap for Shiro
\ No newline at end of file
--- /dev/null
+/* Copyright 2019 T.Shinohara
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+/* Copyright 2019 T.Shinohara
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_number {
+ _NUMBER = 0,
+ _CURSOL,
+ _MOUSE
+};
+
+#define NUMBER TO(_NUMBER)
+#define CURSOL TO(_CURSOL)
+#define MOUSE TO(_MOUSE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_NUMBER] = LAYOUT(
+ NUMBER, CURSOL, MOUSE,
+ KC_P7, KC_P8, KC_P9,
+ KC_P4, KC_P5, KC_P6,
+ KC_P1, KC_P2, KC_P3,
+ KC_P0, KC_BSPC, KC_ENT
+ ),
+ [_CURSOL] = LAYOUT(
+ NUMBER, CURSOL, MOUSE,
+ KC_HOME, KC_UP, KC_PGUP,
+ KC_LEFT, KC_ESC, KC_RIGHT,
+ KC_END, KC_DOWN, KC_PGDN,
+ KC_DEL, KC_BSPC, KC_ENT
+ ),
+ [_MOUSE] = LAYOUT(
+ NUMBER, CURSOL, MOUSE,
+ KC_CUT, KC_COPY, KC_PSTE,
+ KC_UNDO, KC_FIND, KC_AGIN,
+ XXXXXXX, XXXXXXX, XXXXXXX,
+ KC_DEL, KC_BSPC, KC_ENT
+ ),
+};
--- /dev/null
+# The default keymap for Shiro
\ No newline at end of file
--- /dev/null
+# 素 - Shiro
+
+
+
+これは日本の名刺(55mmx91mm)に、3x5の15キーを詰め込んだとても小さいキーパッドです。
+
+This product is a 3x5 very small keypad.
+It is made in 55mm x 91mm according to the Japanese business card.
+
+Keyboard Maintainer: [T.Shinohara](https://github.com/ShinoharaTa)
+Hardware Supported: The Shiro PCBs, ProMicro supported. Using only Kailh Low Profile Switches.
+Hardware Availability: [Booth (Japanese Site)](https://shino3.booth.pm/items/1444895)
+日本国内ではBoothで入手できます: [Booth (Japanese Site)](https://shino3.booth.pm/items/1444895)
+
+
+
+Make for this keyboard default keymap (after setting up your build environment):
+
+ make shiro:default
+
+Make for this keyboard build check keymap (after setting up your build environment):
+
+ make shiro:check
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+[Build guide - Japanese](https://github.com/ShinoharaTa/keyboards/blob/master/Shiro/manual/build_guide_ja.md)
\ No newline at end of file
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
--- /dev/null
+/* Copyright 2019 T.Shinohara
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "shiro.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
+
+*/
--- /dev/null
+/* Copyright 2019 T.Shinohara
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ k00, k01, k02, \
+ k10, k11, k12, \
+ k20, k21, k22, \
+ k30, k31, k32, \
+ k40, k41, k42 \
+) \
+{ \
+ { k00, k01, k02 }, \
+ { k10, k11, k12 }, \
+ { k20, k21, k22 }, \
+ { k30, k31, k32 }, \
+ { k40, k41, k42 } \
+}
--- /dev/null
+# p3lim's b.face layout
+
+
+
+My layout using the winkeyless b.face X2 PCB. The keys indicated with a gray color was not supported by the layout so a custom one was made.
+
+### Building & Flashing
+
+- Hold <kbd>LCTRL</kbd> while connecting to put in flashing mode
+- Follow instructions in the main _bface_ directory
+
+### Layout notes
+
+The two additional keys were on pins 22+41 and 22+42, C3+B1 and C3+B2, which is mapped to col 10 row 1 and col 10 row 2 in the matrix.
--- /dev/null
+/*
+Copyright 2019 Adrian L Lange <legal@p3lim.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "quantum.h"
+
+#define LAYOUT_p3lim(\
+ K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \
+ K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, \
+ K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KC2, KD2, \
+ K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, KC1, \
+ K00, K10, K20, K56, K57, KB0, KC0 \
+){ \
+ { K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KC_NO, KC_NO }, \
+ { K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC1, KC_NO, KC_NO }, \
+ { K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC2, KD2, KC_NO }, \
+ { K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KC_NO, KC_NO }, \
+ { K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \
+ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, K16, K26, K36, K46, K56, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6, KC6, KD6, KE6 }, \
+ { KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \
+}
+
+enum my_keycodes {
+ C_ESC0 = SAFE_RANGE, // layer 0 esc
+ C_ESC1 // layer 1 esc
+};
+
+// use compiler macros for simpler stuff
+#define C_NO1 RALT(KC_QUOT)
+#define C_NO2 RALT(KC_SCLN)
+#define C_NO3 RALT(KC_LBRC)
+#define C_KVM1 LCA(KC_1)
+#define C_KVM2 LCA(KC_2)
+#define C_KVM3 LCA(KC_3)
+#define C_KVM4 LCA(KC_4)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* QWERTY
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | |
+ * |---------------------------------------------------------------------------------| Enter |
+ * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | \ | |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * | FN1 | Alt | GUI | Space | FN2 | Alt | Ctrl |
+ * `-----------------------------------------------------------------------------------------'
+ */
+ [0] = LAYOUT_p3lim(
+ C_ESC0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL,
+ MO(1), KC_LALT, KC_LGUI, KC_SPC, MO(2), KC_RGUI, KC_RCTL
+ ),
+
+ /* FN1
+ * ,-----------------------------------------------------------------------------------------.
+ * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | |
+ * |-----------------------------------------------------------------------------------------+
+ * | Caps | Home| Up | End | PgUp| | | | | | | | | |
+ * |---------------------------------------------------------------------------------| |
+ * | | Left| Down|Right| PgDn| | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | KVM1| KVM2| KVM3| KVM4| | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | |
+ * `-----------------------------------------------------------------------------------------'
+ */
+ [1] = LAYOUT_p3lim(
+ C_ESC1, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,
+ KC_CAPS, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, C_KVM1, C_KVM2, C_KVM3, C_KVM4, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, KC_NO, _______, _______
+ ),
+
+ /* FN2
+ * ,-----------------------------------------------------------------------------------------.
+ * | | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | | | | Å | | |
+ * |---------------------------------------------------------------------------------| |
+ * | | | | | | | | | | | Ø | Æ | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | |
+ * `-----------------------------------------------------------------------------------------'
+ */
+ [2] = LAYOUT_p3lim(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, C_NO3, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, C_NO2, C_NO1, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ KC_NO, _______, _______, _______, _______, _______, _______
+ ),
+ /*
+ [n] = LAYOUT_p3lim(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+ ),
+ */
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record){
+ switch(keycode){
+ case C_ESC0: // layer 0
+ if(record->event.pressed){
+ if(get_mods() & MOD_MASK_SHIFT)
+ register_code(KC_GRAVE);
+ else
+ register_code(KC_ESCAPE);
+ } else {
+ if(get_mods() & MOD_MASK_SHIFT)
+ unregister_code(KC_GRAVE);
+ else
+ unregister_code(KC_ESCAPE);
+ }
+ return false;
+ case C_ESC1: // layer 1
+ if(record->event.pressed){
+ if(get_mods() & MOD_MASK_SHIFT)
+ register_code(KC_ESCAPE);
+ else
+ register_code(KC_GRAVE);
+ } else {
+ if(get_mods() & MOD_MASK_SHIFT)
+ unregister_code(KC_ESCAPE);
+ else
+ unregister_code(KC_GRAVE);
+ }
+ return false;
+ }
+ return true;
+}
--- /dev/null
+{
+ "keyboard_name": "XD004",
+ "maintainer": "",
+ "width": 4,
+ "height": 1,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [{"label":"L", "x":0, "y":0}, {"label":"O", "x":1, "y":0}, {"label":"V", "x":2, "y":0}, {"label":"E", "x":3, "y":0}]
+ }
+ }
+}
--- /dev/null
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ // 0: Base Layer
+ LAYOUT_all(KC_L, KC_O, KC_V, KC_E),
+
+};
+
+// Loop
+void matrix_scan_user(void){
+ // Empty
+};
--- /dev/null
+# Default Keymap for XD004 PCB
+
+This keymap is not very useful, but it will validate that the board works.
+
+## Build
+
+To build the default keymap, simply run `make xd004:default`.
--- /dev/null
+#include QMK_KEYBOARD_H
+
+#define _BASE 0 // Base layer
+#define _SYSTEM 1 // System actions
+#define _VOLUME 2 // Volume actions
+
+#define SUPER_ALT_F4_TIMER 300 // Timeout on the super alt-f4 key
+
+/*
+ The idea of this is pretty simple: base layer has four action, two of which (the outermost)
+ are regular keystrokes on tap, and a momentary layer switch on hold, sending you to layers 1 and 2.
+
+ The other bit of customization here is the 'Super Alt F4' which does Alt-F4, and then Enter if tapped
+ again SUPER_ALT_F4_TIMER miliseconds after. This lets you Alt-F4 applications, and finally quickly
+ double-tap it to Alt-F4+Enter to shut down the PC.
+*/
+
+bool is_alt_f4_active = false;
+uint16_t alt_f4_timer = 0;
+
+enum custom_keycodes { // Make sure have the awesome keycode ready
+ SUPER_ALT_F4 = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ // 0: Base Layer
+ [_BASE] = LAYOUT_all(LT(_SYSTEM, KC_F5), C(G(KC_LEFT)), C(G(KC_RIGHT)), LT(_VOLUME, KC_F7)),
+
+ // 1: System actions
+ [_SYSTEM] = LAYOUT_all(_______, SUPER_ALT_F4, G(KC_D), G(KC_L)),
+
+ // 2: Volume actions
+ [_VOLUME] = LAYOUT_all(KC_MEDIA_NEXT_TRACK, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _______),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) { // This will do most of the grunt work with the keycodes.
+ case SUPER_ALT_F4:
+ if (record->event.pressed) {
+ if (!is_alt_f4_active) {
+ is_alt_f4_active = true;
+ tap_code_16(LALT(KC_F4); // Alt-F4
+ } else {
+ tap_code(KC_ENTER); // Tap enter
+ }
+ } else {
+ unregister_code(KC_TAB);
+ }
+ alt_f4_timer = timer_read();
+ break;
+ }
+ return true;
+}
+
+void matrix_scan_user(void) {
+ if (is_alt_f4_active && timer_elapsed(alt_f4_timer) > SUPER_ALT_F4_TIMER) {
+ is_alt_f4_active = false;
+ }
+};
--- /dev/null
+# Default Keymap for XD004 PCB
+
+A somehow more useful keymap, allowing one to move across virtual desktops on Windows, etc.
+
+It also has a 'Super Alt-F4' key for Windows that, when tapped does Alt-F4, unless two consecutive taps are less than 300ms apart, in which case the second tap becomes Enter. This allows you to close all apps doing taps, and then when the System shutdown window arrives you do a second quick tap and it will type enter, thus shutting down the computer.
+
+## Build
+
+To build the keymap, simply run `make xd004:system_and_media`.
--- /dev/null
+XD004
+==
+
+4-keys board
+
+
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: XD004 PCB v1.0
+Hardware Availability: [KPRepublic](https://kprepublic.com/products/xd004-xiudi-4-custom-mechanical-keyboard-4-keys-switch-leds-pcb-programmed-hot-swappable-macro-key-silver-case-micro-port)
+
+To build with a default keymap (not useful at all, have a look at other keymaps):
+
+```make xd004/v1:default```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+/*
+Copyright 2019 Sidney Bovet <sidney.bovet@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+Note: the following configuration uses 98% of the flash memory, be
+careful if you enable anything else. Also have a look at rules.mk
+where some things are disabled to save space as well.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xCDCD
+#define PRODUCT_ID 0x0404
+#define DEVICE_VER 0x0001
+// Note: unsure about manufacturer
+#define MANUFACTURER XIUDI
+#define PRODUCT XD004 v1
+#define DESCRIPTION XD004 v1 Keyboard PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * On this board we have direct connection: no diodes.
+ */
+#define DIRECT_PINS \
+ { \
+ { D3, D0, C4, B4 } \
+ }
+#define UNUSED_PINS
+
+/* Backlight Setup */
+// Looks like each backlight LED is connected to a single output, D5 is the one furtherst away from USB port
+#define BACKLIGHT_PIN D5
+#define BACKLIGHT_LEVELS 6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* RGB Underglow
+This will not be used, as RGBLIGHT_ENABLE is set to 'no' in rules.mk
+We do not have enough space in the flash for this at the moment, maybe
+further optimizations can be done on that side.
+*/
+#define RGB_DI_PIN C6
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLED_NUM 2
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/* disable action features */
+// #define NO_ACTION_ONESHOT // 462 bytes <- this needs to be un-commented out if Link Time Optimization is disabled, otherwise file is too large
+// The two below are implicit since we use LINK_TIME_OPTIMIZATION_ENABLE (in rules.mk)
+// #define NO_ACTION_MACRO
+// #define NO_ACTION_FUNCTION
\ No newline at end of file
--- /dev/null
+# MCU name
+MCU = atmega16u2
+
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+# LUFA specific
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 2048
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+# Saves about 5% of space:
+LINK_TIME_OPTIMIZATION_ENABLE = yes
+
+#LAYOUTS = ortho_1x4
--- /dev/null
+#include "xd004.h"
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
--- /dev/null
+#pragma once
+
+#include "quantum.h"
+//#include "led.h"
+
+/* XD60 Keymap Definition Macro */
+/*
+ +--------------------------------+
+ | K0 K1 K2 K3 [----- USB
+ +--------------------------------+
+*/
+#define LAYOUT_all(K00, K01, K02, K03) \
+ { \
+ { K00, K01, K02, K03 } \
+ }
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _DEFAULT 0
+#define _LOWER 1
+#define LOWER LT(_LOWER, KC_PENT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_DEFAULT] = LAYOUT_ortho_1x4 (
+ LOWER, KC_P0, KC_PDOT,KC_PAST
+),
+
+/* Lower */
+[_LOWER] = LAYOUT_ortho_1x4 (
+ _______,_______,_______,_______
+),
+};
--- /dev/null
+["","","",""]
\ No newline at end of file
dir=$(pwd -W 2>/dev/null) || dir=$PWD # Use Windows path if on Windows
# Run container and build firmware
-docker run --rm -it $usb_args -v "$dir":/qmk_firmware qmkfm/qmk_firmware \
+docker run --rm -it $usb_args -w /qmk_firmware/ -v "$dir":/qmk_firmware qmkfm/base_container \
make "$keyboard${keymap:+:$keymap}${target:+:$target}"
# if docker is installed - call make within the qmk docker image
if command -v docker >/dev/null; then
function make() {
- docker run --rm -e MAKEFLAGS="$MAKEFLAGS" -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/qmk_firmware make "$@"
+ docker run --rm -e MAKEFLAGS="$MAKEFLAGS" -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/base_container make "$@"
}
fi
# if docker is installed - call make within the qmk docker image
if command -v docker >/dev/null; then
function make() {
- docker run --rm -e MAKEFLAGS="$MAKEFLAGS" -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/qmk_firmware make "$@"
+ docker run --rm -e MAKEFLAGS="$MAKEFLAGS" -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/base_container make "$@"
}
fi
projects / qmk_firmware.git / commitdiff