* Use the
[nix package](https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/autorandr.nix)
on NixOS.
+* Use the [SlackBuild](https://slackbuilds.org/repository/14.2/desktop/autorandr/) on Slackware.
* Use the automated nightlies generated by the
[openSUSE build service](https://build.opensuse.org/package/show/home:phillipberndt/autorandr)
for various distributions (RPM and DEB based).
as the default configuration without you having to change the system-wide
configuration.
-You can store default values for any option in an INI-file in
-`~/.config/autorandr/settings.ini` in a section `config`. The most useful
-candidate for doing that is `skip-options`, if you need it.
+You can store default values for any option in an INI-file located at
+`~/.config/autorandr/settings.ini`. In a `config` section, you may place any
+default values in the form `option-name=option-argument`.
+
+A common and effective use of this is to specify default `skip-options`, for
+instance skipping the `gamma` setting if using
+[`redshift`](https://github.com/jonls/redshift) as a daemon. To implement
+the equivalent of `--skip-options gamma`, your `settings.ini` file should look
+like this:
+
+```
+[config]
+skip-options=gamma
+```
## Advanced usage
If you switch back from `docked` to `mobile`, `~/.config/autorandr/postswitch`
is executed instead of the `docked` specific `postswitch`.
-In these scripts, some of autorandr's state is exposed as environment variables
+If you experience issues with xrandr being executed too early after connecting
+a new monitor, then you can use a `predetect` script to delay the execution.
+Write e.g. `sleep 1` into that file to make autorandr wait a second before
+running `xrandr`.
+
+#### Variables
+
+Some of autorandr's state is exposed as environment variables
prefixed with `AUTORANDR_`, such as:
- `AUTORANDR_CURRENT_PROFILE`
- `AUTORANDR_CURRENT_PROFILES`
- `AUTORANDR_PROFILE_FOLDER`
- `AUTORANDR_MONITORS`
-If you experience issues with xrandr being executed too early after connecting
-a new monitor, then you can use a `predetect` script to delay the execution.
-Write e.g. `sleep 1` into that file to make autorandr wait a second before
-running `xrandr`.
+with the intention that they can be used within the hook scripts.
+
+For instance, you might display which profile has just been activated by
+including the following in a `postswitch` script:
+```sh
+notify-send -i display "Display profile" "$AUTORANDR_CURRENT_PROFILE"
+```
+
+The one kink is that during `preswitch`, `AUTORANDR_CURRENT_PROFILE` is
+reporting the *upcoming* profile rather than the *current* one.
### Wildcard EDID matching
## Changelog
+**autorandr 1.12.1**
+* *2021-12-22* Fix `--match-edid` (see #273)
+
+**autorandr 1.12**
+* *2021-12-16* Switch default interpreter to Python 3
+* *2021-12-16* Add `--list` to list all profiles
+* *2021-12-16* Add `--cycle` to cycle all detected profiles
+* *2021-12-16* Store display properties (see #204)
+
**autorandr 1.11**
* *2020-05-23* Handle empty sys.executable
* *2020-06-08* Fix Python 2 compatibility
.BR \-\-config
Dump the variable values of your current xrandr setup
.TP
+.BR \-\-cycle
+Cycle through all detected profiles
+.TP
.BR \-\-debug
Enable verbose output
.TP
.BR \-\-fingerprint
Fingerprint the current hardware setup
.TP
+.BR \-\-match-edid
+Match displays based on edid instead of name
+.TP
.BR \-\-force
Force loading or reloading of a profile
.TP
+.BR \-\-list
+List all profiles
+.TP
\fB\-\-skip\-options [\fIOPTION\fR] ...
\fRSet a comma\-separated list of xrandr arguments to skip both in change detection and profile application. See \fBxrandr(1)\fR for xrandr arguments.
.TP
.BR \-\-version
Show version information and exit
+.SH FILES
+Configuration files are searched for in the \fIautorandr
+\fRdirectory in the colon separated list of paths in \fI$XDG_CONFIG_DIRS
+\fR- or in \fI/etc/xdg
+\fRif that var is not set. They are then looked for in \fI~/.autorandr
+\fRand if that doesn't exist, in \fI$XDG_CONFIG_HOME/autorandr
+\fRor in \fI~/.config/autorandr\fR if that var is unset.
+
+In each of those directories it looks for directories with \fIconfig\fR and
+\fIsetup\fR in them. It is best to manage these files with the
+\fBautorandr\fR utility.
.SH AUTHOR
\fRPhillip Berndt <phillip.berndt@googlemail.com>
.br
-#!/usr/bin/env python
+#!/usr/bin/env python3
# encoding: utf-8
#
# autorandr.py
import posix
import pwd
import re
+import shlex
import subprocess
import sys
import shutil
import glob
from collections import OrderedDict
-from distutils.version import LooseVersion as Version
from functools import reduce
from itertools import chain
+try:
+ from packaging.version import Version
+except ModuleNotFoundError:
+ from distutils.version import LooseVersion as Version
+
if sys.version_info.major == 2:
import ConfigParser as configparser
else:
import configparser
-__version__ = "1.11"
+__version__ = "1.12.1"
try:
input = raw_input
("vertical", "Stack all connected outputs vertically at their largest resolution", None),
]
+properties = [
+ "Colorspace",
+ "max bpc",
+ "aspect ratio",
+ "Broadcast RGB",
+ "audio",
+ "non-desktop",
+ "TearFree",
+ "underscan vborder",
+ "underscan hborder",
+ "underscan",
+ "scaling mode",
+]
+
help_text = """
Usage: autorandr [options]
--batch run autorandr for all users with active X11 sessions
--current only list current (active) configuration(s)
--config dump your current xrandr setup
+--cycle automatically load the next detected profile
--debug enable verbose output
--detected only list detected (available) configuration(s)
--dry-run don't change anything, only print the xrandr commands
--fingerprint fingerprint your current hardware setup
+--match-edid match diplays based on edid instead of name
--force force (re)loading of a profile / overwrite exiting files
+--list list configurations
--skip-options <option> comma separated list of xrandr arguments (e.g. "gamma")
to skip both in detecting changes and applying a profile
--version show version information and exit
class XrandrOutput(object):
"Represents an XRandR output"
+ XRANDR_PROPERTIES_REGEXP = "|".join(
+ [r"{}:\s*(?P<{}>[\S ]*\S+)"
+ .format(re.sub(r"\s", r"\\\g<0>", p), re.sub(r"\W+", "_", p.lower()))
+ for p in properties])
+
# This regular expression is used to parse an output in `xrandr --verbose'
XRANDR_OUTPUT_REGEXP = """(?x)
^\s*(?P<output>\S[^ ]*)\s+ # Line starts with output name
CRTC:\s*(?P<crtc>[0-9]) | # CRTC value
Transform: (?P<transform>(?:[\-0-9\. ]+\s+){3}) | # Transformation matrix
EDID: (?P<edid>\s*?(?:\\n\\t\\t[0-9a-f]+)+) | # EDID of the output
+ """ + XRANDR_PROPERTIES_REGEXP + """ | # Properties to include in the profile
(?![0-9])[^:\s][^:\n]+:.*(?:\s\\t[\\t ].+)* # Other properties
))+
\s*
"Return the command line parameters for XRandR for this instance"
args = ["--output", self.output]
for option, arg in sorted(self.options_with_defaults.items()):
- args.append("--%s" % option)
+ if option.startswith("x-prop-"):
+ prop_found = False
+ for prop, xrandr_prop in [(re.sub(r"\W+", "_", p.lower()), p) for p in properties]:
+ if prop == option[7:]:
+ args.append("--set")
+ args.append(xrandr_prop)
+ prop_found = True
+ break
+ if not prop_found:
+ print("Warning: Unknown property `%s' in config file. Skipping." % option[7:], file=sys.stderr)
+ continue
+ elif option.startswith("x-"):
+ print("Warning: Unknown option `%s' in config file. Skipping." % option, file=sys.stderr)
+ continue
+ else:
+ args.append("--%s" % option)
if arg:
args.append(arg)
return args
options["crtc"] = match["crtc"]
if match["rate"]:
options["rate"] = match["rate"]
+ for prop in [re.sub(r"\W+", "_", p.lower()) for p in properties]:
+ if match[prop]:
+ options["x-prop-" + prop] = match[prop]
return XrandrOutput(match["output"], edid, options), modes
return matched * 1. / total
+def update_profiles_edid(profiles, config):
+ edid_map = {}
+ for c in config:
+ if config[c].edid is not None:
+ edid_map[config[c].edid] = c
+
+ for p in profiles:
+ profile_config = profiles[p]["config"]
+
+ for edid in edid_map:
+ for c in list(profile_config.keys()):
+ if profile_config[c].edid != edid or c == edid_map[edid]:
+ continue
+
+ print("%s: renaming display %s to %s" % (p, c, edid_map[edid]))
+
+ tmp_disp = profile_config[c]
+
+ if edid_map[edid] in profile_config:
+ # Swap the two entries
+ profile_config[c] = profile_config[edid_map[edid]]
+ profile_config[c].output = c
+ else:
+ # Object is reassigned to another key, drop this one
+ del profile_config[c]
+
+ profile_config[edid_map[edid]] = tmp_disp
+ profile_config[edid_map[edid]].output = edid_map[edid]
+
+
def find_profiles(current_config, profiles):
"Find profiles matching the currently connected outputs, sorting asterisk matches to the back"
detected_profiles = []
if not matches or any((name not in config.keys() for name in current_config.keys() if current_config[name].edid)):
continue
if matches:
- closeness = max(match_asterisk(output.edid, current_config[name].edid), match_asterisk(current_config[name].edid, output.edid))
+ closeness = max(match_asterisk(output.edid, current_config[name].edid), match_asterisk(
+ current_config[name].edid, output.edid))
detected_profiles.append((closeness, profile_name))
detected_profiles = [o[1] for o in sorted(detected_profiles, key=lambda x: -x[0])]
return detected_profiles
waits a second and then retries once. This mitigates #47,
a timing issue with some drivers.
"""
- if "dry_run" in kwargs:
- dry_run = kwargs["dry_run"]
- del kwargs["dry_run"]
+ if kwargs.pop("dry_run", False):
+ for arg in args[0]:
+ print(shlex.quote(arg), end=" ")
+ print()
+ return 0
else:
- dry_run = False
- kwargs_redirected = dict(kwargs)
- if not dry_run:
if hasattr(subprocess, "DEVNULL"):
- kwargs_redirected["stdout"] = getattr(subprocess, "DEVNULL")
+ kwargs["stdout"] = getattr(subprocess, "DEVNULL")
else:
- kwargs_redirected["stdout"] = open(os.devnull, "w")
- kwargs_redirected["stderr"] = kwargs_redirected["stdout"]
- retval = subprocess.call(*args, **kwargs_redirected)
- if retval != 0:
- time.sleep(1)
+ kwargs["stdout"] = open(os.devnull, "w")
+ kwargs["stderr"] = kwargs["stdout"]
retval = subprocess.call(*args, **kwargs)
- return retval
+ if retval != 0:
+ time.sleep(1)
+ retval = subprocess.call(*args, **kwargs)
+ return retval
def get_fb_dimensions(configuration):
found_left_monitor = False
found_top_monitor = False
outputs = sorted(new_configuration.keys(), key=lambda x: new_configuration[x].sort_key)
- if dry_run:
- base_argv = ["echo", "xrandr"]
- else:
- base_argv = ["xrandr"]
+ base_argv = ["xrandr"]
# There are several xrandr / driver bugs we need to take care of here:
# - We cannot enable more than two screens at the same time
def main(argv):
try:
opts, args = getopt.getopt(argv[1:], "s:r:l:d:cfh",
- ["batch", "dry-run", "change", "default=", "save=", "remove=", "load=",
+ ["batch", "dry-run", "change", "cycle", "default=", "save=", "remove=", "load=",
"force", "fingerprint", "config", "debug", "skip-options=", "help",
- "current", "detected", "version"])
+ "list", "current", "detected", "version", "match-edid"])
except getopt.GetoptError as e:
print("Failed to parse options: {0}.\n"
"Use --help to get usage information.".format(str(e)),
profiles.update(load_profiles(profile_path))
profile_symlinks.update(get_symlinks(profile_path))
read_config(options, profile_path)
- # Sort by descending mtime
- profiles = OrderedDict(sorted(profiles.items(), key=lambda x: -x[1]["config-mtime"]))
except Exception as e:
raise AutorandrException("Failed to load profiles", e)
- profile_symlinks = {k: v for k, v in profile_symlinks.items() if v in (x[0] for x in virtual_profiles) or v in profiles}
-
exec_scripts(None, "predetect")
config, modes = parse_xrandr_output()
+ if "--match-edid" in options:
+ update_profiles_edid(profiles, config)
+
+ # Sort by mtime
+ sort_direction = -1
+ if "--cycle" in options:
+ # When cycling through profiles, put the profile least recently used to the top of the list
+ sort_direction = 1
+ profiles = OrderedDict(sorted(profiles.items(), key=lambda x: sort_direction * x[1]["config-mtime"]))
+ profile_symlinks = {k: v for k, v in profile_symlinks.items() if v in (x[0] for x in virtual_profiles) or v in profiles}
+
if "--fingerprint" in options:
output_setup(config, sys.stdout)
sys.exit(0)
best_index = 9999
for profile_name in profiles.keys():
if profile_blocked(os.path.join(profile_path, profile_name), block_script_metadata):
- if "--current" not in options and "--detected" not in options:
+ if not any(opt in options for opt in ("--current", "--detected", "--list")):
print("%s (blocked)" % profile_name)
continue
props = []
+ is_current_profile = profile_name in current_profiles
if profile_name in detected_profiles:
if len(detected_profiles) == 1:
index = 1
else:
index = detected_profiles.index(profile_name) + 1
props.append("(detected) (%d%s match)" % (index, ["st", "nd", "rd"][index - 1] if index < 4 else "th"))
- if ("-c" in options or "--change" in options) and index < best_index:
- load_profile = profile_name
- best_index = index
+ if index < best_index:
+ if "-c" in options or "--change" in options or ("--cycle" in options and not is_current_profile):
+ load_profile = profile_name
+ best_index = index
elif "--detected" in options:
continue
- if profile_name in current_profiles:
+ if is_current_profile:
props.append("(current)")
elif "--current" in options:
continue
- if "--current" in options or "--detected" in options:
+ if any(opt in options for opt in ("--current", "--detected", "--list")):
print("%s" % (profile_name, ))
else:
print("%s%s%s" % (profile_name, " " if props else "", " ".join(props)))
if "-d" in options:
options["--default"] = options["-d"]
- if not load_profile and "--default" in options and ("-c" in options or "--change" in options):
+ if not load_profile and "--default" in options and ("-c" in options or "--change" in options or "--cycle" in options):
load_profile = options["--default"]
if load_profile:
scripts_path = profile["path"]
except KeyError:
raise AutorandrException("Failed to load profile '%s': Profile not found" % load_profile)
- if load_profile in detected_profiles and detected_profiles[0] != load_profile:
+ if "--dry-run" not in options:
update_mtime(os.path.join(scripts_path, "config"))
add_unused_outputs(config, load_config)
if load_config == dict(config) and "-f" not in options and "--force" not in options:
prev="${COMP_WORDS[COMP_CWORD-1]}"
opts="-h -c -s -r -l -d"
- lopts="--help --change --save --remove --load --default --force --fingerprint --config --dry-run"
+ lopts="--help --change --cycle --save --remove --load --list --default --force --fingerprint --match-edid --config --dry-run"
# find system-level autorandr dirs
OIFS="$IFS"
-%define name autorandr
-%define version 1.10.1
-%define release 1
+Name: autorandr
+Version: 1.12.1
+Release: %autorelease
+Summary: Automatically select a display configuration based on connected devices
-# pmutils
-%define use_pm_utils 1
-%if 0%{?fedora} > 22
-%define use_pm_utils 0
-%endif
-%if 0%{?rhel} > 7
-%define use_pm_utils 0
-%endif
+BuildArch: noarch
+BuildRequires: python3-devel
-# python 2 or 3
-%define py_ver 3
-%if 0%{?rhel}
-%define py_ver 2
-%endif
+License: GPLv3
+URL: https://github.com/phillipberndt/%{name}
+Source0: %{url}/archive/%{version}/%{name}-%{version}.tar.gz
-Summary: Automatically select a display configuration based on connected devices
-Name: %{name}
-Version: %{version}
-Release: %{release}%{?dist}
-Source0: https://github.com/phillipberndt/%{name}/archive/%{version}/%{name}-%{version}.tar.gz
-License: GPLv3
-Group: Development/Libraries
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
-Prefix: %{_prefix}
-BuildArch: noarch
-Vendor: Phillip Berndt <phillip.berndt@googlemail.com>
-Url: https://github.com/phillipberndt/autorandr
-Requires: python%{py_ver}
-%if 0%{?use_pm_utils}
-Requires: pm-utils
-%endif
-%{?systemd_ordering}
-BuildRequires: bash-completion
-BuildRequires: python%{py_ver}-devel
+BuildRequires: make
BuildRequires: systemd
BuildRequires: udev
-%if %{py_ver} == 2
-BuildRequires: python3-devel
-%endif
+BuildRequires: desktop-file-utils
%description
-# autorandr
+%{summary}.
-Automatically select a display configuration based on connected devices
-
-## Branch information
-
-This is a compatible Python rewrite of
-[wertarbyte/autorandr](https://github.com/wertarbyte/autorandr). Contributions
-for bash-completion, fd.o/XDG autostart, Nitrogen, pm-utils, and systemd can be
-found under [contrib](contrib/).
-
-The original [wertarbyte/autorandr](https://github.com/wertarbyte/autorandr)
-tree is unmaintained, with lots of open pull requests and issues. I forked it
-and merged what I thought were the most important changes. If you are searching
-for that version, see the [`legacy` branch](https://github.com/phillipberndt/autorandr/tree/legacy).
-Note that the Python version is better suited for non-standard configurations,
-like if you use `--transform` or `--reflect`. If you use `auto-disper`, you
-have to use the bash version, as there is no disper support in the Python
-version (yet). Both versions use a compatible configuration file format, so
-you can, to some extent, switch between them. I will maintain the `legacy`
-branch until @wertarbyte finds the time to maintain his branch again.
-
-If you are interested in why there are two versions around, see
-[#7](https://github.com/phillipberndt/autorandr/issues/7),
-[#8](https://github.com/phillipberndt/autorandr/issues/8) and
-especially
-[#12](https://github.com/phillipberndt/autorandr/issues/12)
-if you are unhappy with this version and would like to contribute to the bash
-version.
-
-## License information and authors
-
-autorandr is available under the terms of the GNU General Public License
-(version 3).
-
-Contributors to this version of autorandr are:
-
-* Adrián López
-* andersonjacob
-* Alexander Wirt
-* Brice Waegeneire
-* Chris Dunder
-* Christoph Gysin
-* Christophe-Marie Duquesne
-* Daniel Hahler
-* Maciej Sitarz
-* Mathias Svensson
-* Matthew R Johnson
-* Nazar Mokrynskyi
-* Phillip Berndt
-* Rasmus Wriedt Larsen
-* Simon Wydooghe
-* Stefan Tomanek
-* stormc
-* tachylatus
-* Timo Bingmann
-* Timo Kaufmann
-* Tomasz Bogdal
-* Victor Häggqvist
-* Jan-Oliver Kaiser
-
-## Installation/removal
-
-You can use the `autorandr.py` script as a stand-alone binary. If you'd like to
-install it as a system-wide application, there is a Makefile included that also
-places some configuration files in appropriate directories such that autorandr
-is invoked automatically when a monitor is connected or removed, the system
-wakes up from suspend, or a user logs into an X11 session. Run `make install`
-as root to install it.
-
-If you prefer to have a system wide install managed by your package manager,
-you can
-
-* Use the [official Arch package](https://www.archlinux.org/packages/community/any/autorandr/).
-* Use the [official Debian package](https://packages.debian.org/sid/x11/autorandr) on sid
-* Use the [ebuild from zugaina](https://gpo.zugaina.org/x11-misc/autorandr) on Gentoo.
-* Use the
- [nix package](https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/autorandr.nix)
- on NixOS.
-* Use the automated nightlies generated by the
- [openSUSE build service](https://build.opensuse.org/package/show/home:phillipberndt/autorandr)
- for various distributions (RPM and DEB based).
-* Use the [X binary package system](https://wiki.voidlinux.eu/XBPS)' on Void Linux
-* Build a .deb-file from the source tree using `make deb`.
-* Build a .rpm-file from the source tree using `make rpm`.
-
-We appreciate packaging scripts for other distributions, please file a pull
-request if you write one.
-
-If you prefer `pip` over your package manager, you can install autorandr with:
-
- sudo pip install "git+http://github.com/phillipberndt/autorandr#egg=autorandr"
-
-or simply
-
- sudo pip install autorandr
-
-if you prefer to use a stable version.
-
-## How to use
-
-Save your current display configuration and setup with:
-
- autorandr --save mobile
-
-Connect an additional display, configure your setup and save it:
-
- autorandr --save docked
-
-Now autorandr can detect which hardware setup is active:
-
- $ autorandr
- mobile
- docked (detected)
-
-To automatically reload your setup:
-
- $ autorandr --change
-
-To manually load a profile:
-
- $ autorandr --load <profile>
-
-or simply:
-
- $ autorandr <profile>
-
-autorandr tries to avoid reloading an identical configuration. To force the
-(re)configuration:
-
- $ autorandr --load <profile> --force
-
-To prevent a profile from being loaded, place a script call _block_ in its
-directory. The script is evaluated before the screen setup is inspected, and
-in case of it returning a value of 0 the profile is skipped. This can be used
-to query the status of a docking station you are about to leave.
-
-If no suitable profile can be identified, the current configuration is kept.
-To change this behaviour and switch to a fallback configuration, specify
-`--default <profile>`. The system-wide installation of autorandr by default
-calls autorandr with a parameter `--default default`. There are three special,
-virtual configurations called `horizontal`, `vertical` and `common`. They
-automatically generate a configuration that incorporates all screens
-connected to the computer. You can symlink `default` to one of these
-names in your configuration directory to have autorandr use any of them
-as the default configuration without you having to change the system-wide
-configuration.
-
-You can store default values for any option in an INI-file in
-`~/.config/autorandr/settings.ini` in a section `config`. The most useful
-candidate for doing that is `skip-options`, if you need it.
-
-## Advanced usage
-
-### Hook scripts
-
-Three more scripts can be placed in the configuration directory
-(as defined by the [XDG spec](https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html),
-usually `~/.config/autorandr` or `~/.autorandr` if you have an old installation
-for user configuration and `/etc/xdg/autorandr` for system wide configuration):
-
-- `postswitch` is executed *after* a mode switch has taken place. This can be
- used to notify window managers or other applications about the switch.
-- `preswitch` is executed *before* a mode switch takes place.
-- `postsave` is executed after a profile was stored or altered.
-- `predetect` is executed before autorandr attempts to run xrandr.
-
-These scripts must be executable and can be placed directly in the configuration
-directory, where they will always be executed, or in the profile subdirectories,
-where they will only be executed on changes regarding that specific profile.
-
-Instead (or in addition) to these scripts, you can also place as many executable
-files as you like in subdirectories called `script_name.d` (e.g. `postswitch.d`).
-
-If a script with the same name occurs multiple times, user configuration
-takes precedence over system configuration (as specified by the
-[XDG spec](https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html))
-and profile configuration over general configuration.
-
-As a concrete example, suppose you have the files
-
-- `/etc/xdg/autorandr/postswitch`
-- `~/.config/autorandr/postswitch`
-- `~/.config/autorandr/postswitch.d/notify-herbstluftwm`
-- `~/.config/autorandr/docked/postswitch`
-
-and switch from `mobile` to `docked`. Then
-`~/.config/autorandr/docked/postswitch` is executed, since the profile specific
-configuration takes precedence, and
-`~/.config/autorandr/postswitch.d/notify-herbstluftwm` is executed, since
-it has a unique name.
-
-If you switch back from `docked` to `mobile`, `~/.config/autorandr/postswitch`
-is executed instead of the `docked` specific `postswitch`.
-
-In these scripts, some of autorandr's state is exposed as environment variables
-prefixed with `AUTORANDR_`, such as:
-- `AUTORANDR_CURRENT_PROFILE`
-- `AUTORANDR_CURRENT_PROFILES`
-- `AUTORANDR_PROFILE_FOLDER`
-- `AUTORANDR_MONITORS`
-
-If you experience issues with xrandr being executed too early after connecting
-a new monitor, then you can use a `predetect` script to delay the execution.
-Write e.g. `sleep 1` into that file to make autorandr wait a second before
-running `xrandr`.
-
-### Wildcard EDID matching
-
-The EDID strings in the `~/.config/autorandr/*/setup` files may contain an
-asterisk to enable wildcard matching: Such EDIDs are matched against connected
-monitors using the usual file name globbing rules. This can be used to create
-profiles matching multiple (or any) monitors.
-
-## Changelog
-
-**autorandr 1.10.1**
-* *2020-05-04* Revert making the launcher the default (fixes #195)
-
-**autorandr 1.10**
-* *2020-04-23* Fix hook script execution order to match description from readme
-* *2020-04-11* Handle negative gamma values (fixes #188)
-* *2020-04-11* Sort approximate matches in detected profiles by quality of match
-* *2020-01-31* Handle non-ASCII environment variables (fixes #180)
-* *2019-12-31* Fix output positioning if the top-left output is not the first
-* *2019-12-31* Accept negative gamma values (and interpret them as 0)
-* *2019-12-31* Prefer the X11 launcher over systemd/udev configuration
-
-**autorandr 1.9**
-
-* *2019-11-10* Count closed lids as disconnected outputs
-* *2019-10-05* Do not overwrite existing configurations without `--force`
-* *2019-08-16* Accept modes that don't match the WWWxHHH pattern
-* *2019-03-22* Improve bash autocompletion
-* *2019-03-21* Store CRTC values in configurations
-* *2019-03-24* Fix handling of recently disconnected outputs (See #128 and #143)
-
-**autorandr 1.8.1**
-
-* *2019-03-18* Removed mandb call from Makefile
-
-**autorandr 1.8**
-
-* *2019-02-17* Add an X11 daemon that runs autorandr when a display connects (by @rliou92, #127)
-* *2019-02-17* Replace width=0 check with disconnected to detect disconnected monitors (by @joseph-jones, #139)
-* *2019-02-17* Fix handling of empty padding (by @jschwab, #138)
-* *2019-02-17* Add a man page (by @somers-all-the-time, #133)
-
-**autorandr 1.7**
-
-* *2018-09-25* Fix FB size computation with rotated screens (by @Janno, #117)
-
-**autorandr 1.6**
-
-* *2018-04-19* Bugfix: Do not load default profile unless --change is set
-* *2018-04-30* Added a `AUTORANDR_MONITORS` variable to hooks (by @bricewge, #106)
-* *2018-06-29* Fix detection of current configuration if extra monitors are active
-* *2018-07-11* Bugfix in the latest change: Correctly handle "off" minitors when comparing
-* *2018-07-19* Do not kill spawned user processes from systemd unit
-* *2018-07-20* Correctly handle "off" monitors when comparing -- fixup for another bug.
-
-**autorandr 1.5**
-
-* *2018-01-03* Add --version
-* *2018-01-04* Fixed vertical/horizontal/clone-largest virtual profiles
-* *2018-03-07* Output all non-error messages to stdout instead of stderr
-* *2018-03-25* Add --detected and --current to filter the profile list output
-* *2018-03-25* Allow wildcard matching in EDIDs
-
-**autorandr 1.4**
-
-* *2017-12-22* Fixed broken virtual profile support
-* *2017-12-14* Added support for a settings file
-* *2017-12-14* Added a virtual profile `off`, which disables all screens
-
-**autorandr 1.3**
-
-* *2017-11-13* Add a short form for `--load`
-* *2017-11-21* Fix environment stealing in `--batch` mode (See #87)
-
-**autorandr 1.2**
+%prep
+%setup -q
+%py3_shebang_fix ./autorandr.py
-* *2017-07-16* Skip `--panning` unless it is required (See #72)
-* *2017-10-13* Add `clone-largest` virtual profile
+%post
+udevadm control --reload-rules
+%systemd_post autorandr.service
-**autorandr 1.1**
+%preun
+%systemd_preun autorandr.service
-* *2017-06-07* Call systemctl with `--no-block` from udev rule (See #61)
-* *2017-01-20* New script hook, `predetect`
-* *2017-01-18* Accept comments (lines starting with `#`) in config/setup files
+%postun
+%systemd_postun autorandr.service
-**autorandr 1.0**
+%package bash-completion
+Summary: Bash completion for autorandr
+Requires: %{name}
+Requires: bash-completion
+%description bash-completion
+This package provides bash-completion files for autorandr
-* *2016-12-07* Tag the current code as version 1.0.0; see github issue #54
-* *2016-10-03* Install a desktop file to `/etc/xdg/autostart` by default
%package zsh-completion
-Summary: zsh-completion for autorandr
+Summary: Zsh completion for autorandr
Requires: zsh
Requires: %{name}
%description zsh-completion
This package provides zsh-completion files for autorandr
-%prep
-%setup -n %{name}-%{version} -n %{name}-%{version}
-%if %{py_ver} == 3
-pathfix.py -pni "%{__python3} %{py3_shbang_opts}" ./autorandr.py
-%else
-pathfix.py -pni "%{__python2} %{py2_shbang_opts}" ./autorandr.py
-%endif
-
%install
-make DESTDIR="%{buildroot}" PREFIX=/usr install
+%make_install
install -vDm 644 README.md -t "%{buildroot}/usr/share/doc/%{name}/"
-install -vDm 644 contrib/zsh_completion/_autorandr -t %{buildroot}%{_datarootdir}/zsh/site-functions/
+install -vDm 644 contrib/bash_completion/autorandr -t %{buildroot}%{_datadir}/bash-completion/completions/
+install -vDm 644 contrib/zsh_completion/_autorandr -t %{buildroot}%{_datadir}/zsh/site-functions/
+install -vDm 644 autorandr.1 -t %{buildroot}%{_mandir}/man1/
+%check
+desktop-file-validate %{buildroot}%{_sysconfdir}/xdg/autostart/autorandr.desktop
%files
-%defattr(-,root,root,-)
-%attr(0644,root,root) %{_unitdir}/autorandr.service
-%license gpl-3.0.txt
+%license gpl-3.0.txt
%doc README.md
-%config(noreplace) %{_sysconfdir}/*
-%{_bindir}/*
-%{_mandir}
-%{_datarootdir}/bash-completion/completions/autorandr
+%{_mandir}/man1/*
+%{_bindir}/autorandr
+%{_unitdir}/autorandr.service
+%{_sysconfdir}/xdg/autostart/autorandr.desktop
%{_udevrulesdir}/40-monitor-hotplug.rules
+%files bash-completion
+%{_datadir}/bash-completion/completions/autorandr
+
%files zsh-completion
-%{_datarootdir}/zsh/site-functions/_autorandr
+%{_datadir}/zsh/site-functions/_autorandr
%changelog
-* Mon Jun 08 2020 Jerzy Drozdz <jerzy.drozdz@jdsieci.pl> - 1.10.1-1
-- Updated to stable 1.10.1
-- Added zsh-completion subpackage
-* Wed May 22 2019 Maciej Sitarz <macieksitarz@wp.pl> - 1.8.1-1
-- Updated to stable 1.8.1
-* Fri Sep 28 2018 Maciej Sitarz <macieksitarz@wp.pl> - 1.7-1
-- Updated to stable 1.7
-* Thu Jul 19 2018 Maciej Sitarz <macieksitarz@wp.pl> - 1.5-1
-- Updated to stable 1.5
-- Changed dest path for systemd service file
-* Sun Oct 01 2017 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 1.1-2
-- Added conditionals for pm-utils, compability with Fedora26+
-- Removed bash-completion from requisites
-- Removed udev from requisites
-* Sun Sep 03 2017 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 1.1-1
-- Update to stable 1.1
-* Fri Feb 17 2017 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20170217git-1
-- Update to master
-* Wed Jul 6 2016 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20160706git-1
-- Set default value of $XDG_CONFIG_DIRS to fulfill the standard
-* Fri Jul 1 2016 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20160701git-1.1
-- fixed running udevadm in post
-* Fri Jul 1 2016 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20160701git-1
-- initial build
+%autochangelog
[Unit]
Description=autorandr execution hook
After=sleep.target
-# Note: StartLimitInterval was renamed to StartLimitIntervalSec in systemd-230.
-# See autorandr bug #69. Do not rename for now, as the old name is kept for
-# compatibility.
-StartLimitInterval=5
+StartLimitIntervalSec=5
StartLimitBurst=1
[Service]
"($exclude)"{-r,--remove}"[remove profile]:profile:__autorandr_saved_profile" \
--batch"[run autorandr for all users]" \
--current"[list current active configurations]" \
+ --cycle"[cycle through all detected profiles]" \
--config"[dump current xrandr setup]" \
--debug"[enable verbose output]" \
--dry-run"[don't change anything]" \
--fingerprint"[fingerprint current hardware]" \
+ --match-edid"[match displays using edid]" \
--force"[force loading of a profile]" \
+ --list"[list all profiles]" \
--skip-options"[skip xrandr options]:xrandr options:_values -s , options gamma brightness panning transform primary mode pos rate" \
--version"[show version]"
}
setup(
name='autorandr',
- version='1.11.post1',
+ version='1.12.1.post1',
description='Automatically select a display configuration based on connected devices',
long_description=long_description,
'Programming Language :: Python :: 3',
'Programming Language :: Python :: 3.3',
'Programming Language :: Python :: 3.4',
- 'Programming Language :: Python :: 3.5',
+ 'Programming Language :: Python :: 3.6',
+ 'Programming Language :: Python :: 3.7',
+ 'Programming Language :: Python :: 3.8',
+ 'Programming Language :: Python :: 3.9',
+ 'Programming Language :: Python :: 3.10',
],
keywords='xrandr',