3 # Library functions for debhelper programs, perl version.
5 # Joey Hess, GPL copyright 1997-2000.
7 package Debian::Debhelper::Dh_Lib;
11 use vars qw(@ISA @EXPORT %dh);
13 @EXPORT=qw(&init &doit &complex_doit &verbose_print &error &warning &tmpdir
14 &pkgfile &pkgext &pkgfilename &isnative &autoscript &filearray
15 &filedoublearray &getpackages &basename &dirname &xargs %dh
16 &compat &addsubstvar &delsubstvar &excludefile &is_udeb
22 # If DH_OPTIONS is set, prepend it @ARGV.
23 if (defined($ENV{DH_OPTIONS})) {
24 # Ignore leading/trailing whitespace.
25 $ENV{DH_OPTIONS}=~s/^\s+//;
26 $ENV{DH_OPTIONS}=~s/\s+$//;
27 unshift @ARGV,split(/\s+/,$ENV{DH_OPTIONS});
30 # Check to see if an argument on the command line starts with a dash.
31 # if so, we need to pass this off to the resource intensive
32 # Getopt::Long, which I'd prefer to avoid loading at all if possible.
35 foreach $arg (@ARGV) {
42 eval "use Debian::Debhelper::Dh_Getopt";
44 %dh=Debian::Debhelper::Dh_Getopt::parseopts();
47 # Another way to set excludes.
48 if (exists $ENV{DH_ALWAYS_EXCLUDE} && length $ENV{DH_ALWAYS_EXCLUDE}) {
49 push @{$dh{EXCLUDE}}, split(":", $ENV{DH_ALWAYS_EXCLUDE});
52 # Generate EXCLUDE_FIND.
55 foreach (@{$dh{EXCLUDE}}) {
59 $dh{EXCLUDE_FIND}.="-regex .*$x.* -or ";
61 $dh{EXCLUDE_FIND}=~s/ -or $//;
64 # Check to see if DH_VERBOSE environment variable was set, if so,
65 # make sure verbose is on.
66 if (defined $ENV{DH_VERBOSE} && $ENV{DH_VERBOSE} ne "") {
70 # Check to see if DH_NO_ACT environment variable was set, if so,
71 # make sure no act mode is on.
72 if (defined $ENV{DH_NO_ACT} && $ENV{DH_NO_ACT} ne "") {
76 my @allpackages=getpackages();
77 # Get the name of the main binary package (first one listed in
78 # debian/control). Only if the main package was not set on the
80 if (! exists $dh{MAINPACKAGE} || ! defined $dh{MAINPACKAGE}) {
81 $dh{MAINPACKAGE}=$allpackages[0];
84 # Check if packages to build have been specified, if not, fall back to
85 # the default, doing them all.
86 if (! defined $dh{DOPACKAGES} || ! @{$dh{DOPACKAGES}}) {
87 if ($dh{DOINDEP} || $dh{DOARCH} || $dh{DOSAME}) {
88 error("You asked that all arch in(dep) packages be built, but there are none of that type.");
90 push @{$dh{DOPACKAGES}},@allpackages;
93 # Check to see if -P was specified. If so, we can only act on a single
95 if ($dh{TMPDIR} && $#{$dh{DOPACKAGES}} > 0) {
96 error("-P was specified, but multiple packages would be acted on (".join(",",@{$dh{DOPACKAGES}}).").");
99 # Figure out which package is the first one we were instructed to build.
100 # This package gets special treatement: files and directories specified on
101 # the command line may affect it.
102 $dh{FIRSTPACKAGE}=${$dh{DOPACKAGES}}[0];
105 # Pass it an array containing the arguments of a shell command like would
106 # be run by exec(). It turns that into a line like you might enter at the
107 # shell, escaping metacharacters and quoting arguments that contain spaces.
112 foreach my $word (@args) {
114 # Escape only a few things since it will be quoted.
115 # Note we use double quotes because you cannot
116 # escape ' in single quotes, while " can be escaped
118 # This does make -V"foo bar" turn into "-Vfoo bar",
119 # but that will be parsed identically by the shell
121 $word=~s/([\n`\$"\\])/\\$1/g;
122 push @ret, "\"$word\"";
125 # This list is from _Unix in a Nutshell_. (except '#')
126 $word=~s/([\s!"\$()*+#;<>?@\[\]\\`|~])/\\$1/g;
130 return join(' ', @ret);
133 # Run a command, and display the command to stdout if verbose mode is on.
134 # All commands that modifiy files in $TMP should be ran via this
137 # Note that this cannot handle complex commands, especially anything
138 # involving redirection. Use complex_doit instead.
140 verbose_print(escape_shell(@_));
144 $ret == 0 || error("command returned error code $ret");
148 # Run a command and display the command to stdout if verbose mode is on.
149 # Use doit() if you can, instead of this function, because this function
150 # forks a shell. However, this function can handle more complicated stuff
153 verbose_print(join(" ",@_));
156 # The join makes system get a scalar so it forks off a shell.
157 system(join(" ",@_)) == 0
158 || error("command returned error code");
162 # Run a command that may have a huge number of arguments, like xargs does.
163 # Pass in a reference to an array containing the arguments, and then other
164 # parameters that are the command and any parameters that should be passed to
169 # The kernel can accept command lines up to 20k worth of characters.
170 my $command_max=20000; # LINUX SPECIFIC!!
171 # I could use POSIX::ARG_MAX, but that would be slow.
173 # Figure out length of static portion of command.
176 $static_length+=length($_)+1;
180 my $length=$static_length;
182 if (length($_) + 1 + $static_length > $command_max) {
183 error("This command is greater than the maximum command size allowed by the kernel, and cannot be split up further. What on earth are you doing? \"@_ $_\"");
185 $length+=length($_) + 1;
186 if ($length < $command_max) {
190 doit(@_,@collect) if $#collect > -1;
192 $length=$static_length + length($_) + 1;
195 doit(@_,@collect) if $#collect > -1;
198 # Print something if the verbose flag is on.
203 print "\t$message\n";
207 # Output an error message and exit.
219 print STDERR basename($0).": $message\n";
222 # Returns the basename of the argument passed to it.
226 $fn=~s/\/$//g; # ignore trailing slashes
227 $fn=~s:^.*/(.*?)$:$1:;
231 # Returns the directory name of the argument passed to it.
235 $fn=~s/\/$//g; # ignore trailing slashes
236 $fn=~s:^(.*)/.*?$:$1:;
240 # Pass in a number, will return true iff the current compatibility level
241 # is less than or equal to that number.
246 if (defined $ENV{DH_COMPAT}) {
249 elsif (-e 'debian/compat') {
251 open (COMPAT_IN, "debian/compat") || error "debian/compat: $!";
256 if ($c > $max_compat) {
257 error("Sorry, but $max_compat is the highest compatibility level of debhelper currently supported.");
263 # Pass it a name of a binary package, it returns the name of the tmp dir to
264 # use, for that package.
271 elsif (compat(1) && $package eq $dh{MAINPACKAGE}) {
272 # This is for back-compatibility with the debian/tmp tradition.
276 return "debian/$package";
280 # Pass this the name of a binary package, and the name of the file wanted
281 # for the package, and it will return the actual existing filename to use.
283 # It tries several filenames:
284 # * debian/package.filename.buildarch
285 # * debian/package.filename
286 # * debian/file (if the package is the main package)
287 # If --name was specified then tonly the first two are tried, and they must
288 # have the name after the pacage name:
289 # * debian/package.name.filename.buildarch
290 # * debian/package.name.filename
295 if (defined $dh{NAME}) {
296 $filename="$dh{NAME}.$filename";
299 if (-f "debian/$package.$filename.".buildarch()) {
300 return "debian/$package.$filename.".buildarch();
302 elsif (-f "debian/$package.$filename") {
303 return "debian/$package.$filename";
305 elsif ($package eq $dh{MAINPACKAGE} && -f "debian/$filename") {
306 return "debian/$filename";
313 # Pass it a name of a binary package, it returns the name to prefix to files
314 # in debian/ for this package.
318 if (compat(1) and $package eq $dh{MAINPACKAGE}) {
324 # Pass it the name of a binary package, it returns the name to install
325 # files by in eg, etc. Normally this is the same, but --name can override
330 if (defined $dh{NAME}) {
336 # Returns 1 if the package is a native debian package, null otherwise.
337 # As a side effect, sets $dh{VERSION} to the version of this package.
339 # Caches return code so it only needs to run dpkg-parsechangelog once.
345 return $isnative_cache{$package} if defined $isnative_cache{$package};
347 # Make sure we look at the correct changelog.
348 my $isnative_changelog=pkgfile($package,"changelog");
349 if (! $isnative_changelog) {
350 $isnative_changelog="debian/changelog";
352 # Get the package version.
353 my $version=`dpkg-parsechangelog -l$isnative_changelog`;
354 ($dh{VERSION})=$version=~m/Version:\s*(.*)/m;
355 # Did the changelog parse fail?
356 if (! defined $dh{VERSION}) {
357 error("changelog parse failure");
360 # Is this a native Debian package?
361 if ($dh{VERSION}=~m/.*-/) {
362 return $isnative_cache{$package}=0;
365 return $isnative_cache{$package}=1;
370 # Automatically add a shell script snippet to a debian script.
371 # Only works if the script has #DEBHELPER# in it.
375 # 2: script to add to
376 # 3: filename of snippet
377 # 4: sed to run on the snippet. Ie, s/#PACKAGE#/$PACKAGE/
384 # This is the file we will append to.
385 my $outfile="debian/".pkgext($package)."$script.debhelper";
387 # Figure out what shell script snippet to use.
389 if (defined($ENV{DH_AUTOSCRIPTDIR}) &&
390 -e "$ENV{DH_AUTOSCRIPTDIR}/$filename") {
391 $infile="$ENV{DH_AUTOSCRIPTDIR}/$filename";
394 if (-e "/usr/share/debhelper/autoscripts/$filename") {
395 $infile="/usr/share/debhelper/autoscripts/$filename";
398 error("/usr/share/debhelper/autoscripts/$filename does not exist");
402 complex_doit("echo \"# Automatically added by ".basename($0)."\">> $outfile");
403 complex_doit("sed \"$sed\" $infile >> $outfile");
404 complex_doit("echo '# End automatically added section' >> $outfile");
407 # Removes a whole substvar line.
412 my $ext=pkgext($package);
413 my $substvarfile="debian/${ext}substvars";
415 if (-e $substvarfile) {
416 complex_doit("grep -s -v '^${substvar}=' $substvarfile > $substvarfile.new || true");
417 doit("mv", "$substvarfile.new","$substvarfile");
421 # Adds a dependency on some package to the specified
422 # substvar in a package's substvar's file.
426 my $deppackage=shift;
430 my $ext=pkgext($package);
431 my $substvarfile="debian/${ext}substvars";
433 $str.=" ($verinfo)" if defined $verinfo && length $verinfo;
435 # Figure out what the line will look like, based on what's there
436 # now, and what we're to add or remove.
438 if (-e $substvarfile) {
440 open(SUBSTVARS_IN, "$substvarfile") || error "read $substvarfile: $!";
441 while (<SUBSTVARS_IN>) {
443 if (/^\Q$substvar\E=(.*)/) {
444 %items = map { $_ => 1} split(", ", $1);
456 $line=join(", ", keys %items);
463 complex_doit("(grep -s -v ${substvar} $substvarfile; echo ".escape_shell("${substvar}=$line").") > $substvarfile.new");
464 doit("mv", "$substvarfile.new", $substvarfile);
467 delsubstvar($package,$substvar);
471 # Reads in the specified file, one line at a time. splits on words,
472 # and returns an array of arrays of the contents.
473 # If a value is passed in as the second parameter, then glob
474 # expansion is done in the directory specified by the parameter ("." is
475 # frequently a good choice).
476 sub filedoublearray {
481 open (DH_FARRAY_IN, $file) || error("cannot read $file: $1");
482 while (<DH_FARRAY_IN>) {
484 # Only do glob expansion in v3 mode.
486 # The tricky bit is that the glob expansion is done
487 # as if we were in the specified directory, so the
488 # filenames that come out are relative to it.
489 if (defined $globdir && ! compat(2)) {
490 for (map { glob "$globdir/$_" } split) {
505 # Reads in the specified file, one word at a time, and returns an array of
506 # the result. Can do globbing as does filedoublearray.
508 return map { @$_ } filedoublearray(@_);
511 # Passed a filename, returns true if -X says that file should be excluded.
513 my $filename = shift;
514 foreach my $f (@{$dh{EXCLUDE}}) {
515 return 1 if $filename =~ /\Q$f\E/;
520 # Returns the build architecture. (Memoized)
525 return $arch if defined $arch;
527 $arch=`dpkg-architecture -qDEB_HOST_ARCH 2>/dev/null` || error($!);
533 # Returns a list of packages in the control file.
534 # Must pass "arch" or "indep" or "same" to specify arch-dependant or
535 # -independant or same arch packages. If nothing is specified, returns all
537 # As a side effect, populates %package_arches and %package_types with the
538 # types of all packages (not only those returned).
539 my (%package_types, %package_arches);
546 $type="" if ! defined $type;
548 # Look up the build arch if we need to.
550 if ($type eq 'same') {
551 $buildarch=buildarch();
559 open (CONTROL, 'debian/control') ||
560 error("cannot read debian/control: $!\n");
564 if (/^Package:\s*(.*)/) {
566 # Detect duplicate package names in the same control file.
567 if (! $seen{$package}) {
571 error("debian/control has a duplicate entry for $package");
575 if (/^Architecture:\s*(.*)/) {
578 if (/^X[BC]*-Package-Type:\s*(.*)/) {
582 if (!$_ or eof) { # end of stanza.
584 $package_types{$package}=$package_type;
585 $package_arches{$package}=$arch;
588 (($type eq 'indep' && $arch eq 'all') ||
589 ($type eq 'arch' && $arch ne 'all') ||
590 ($type eq 'same' && ($arch eq 'any' || $arch =~ /\b$buildarch\b/)) ||
592 push @list, $package;
606 return $package_types{$package} eq 'udeb';
612 my $filearch=$package_arches{$package} eq 'all' ? "all" : buildarch();
613 isnative($package); # side effect
614 return "${package}_$dh{VERSION}_$filearch.udeb";